Try a "plus" image and you'll be set. Dave
Priscilla Oppenheimer wrote: > I guess he's just using an IOS image that doesn't support inter-VLAN > routing. Can someone point me to a chart? I don't have a CCO login though. > > Here's his attempt to use the encapsulation command and a show version and > show flash. > > RTR#config t > Enter configuration commands, one per line. End with CNTL/Z. > RTR(config)#int f0/0 > RTR(config-if)#no ip address > RTR(config-if)#int f0/0.1 > RTR(config-subif)#encapsulation dot1q 100 > ^ > % Invalid input detected at '^' marker. > > > RTR#show version > Cisco Internetwork Operating System Software > IOS (tm) C2600 Software (C2600-IO3-M), Version 12.1(5), RELEASE SOFTWARE > (fc1) > Copyright (c) 1986-2000 by cisco Systems, Inc. > Compiled Wed 25-Oct-00 11:13 by cmong > Image text-base: 0x80008088, data-base: 0x8085F2D8 > > ROM: System Bootstrap, Version 11.3(2)XA4, RELEASE SOFTWARE (fc1) > > RTR uptime is 22 hours, 17 minutes > System returned to ROM by power-on > System image file is "flash:c2600-io3-mz.121-5.bin" > > cisco 2621 (MPC860) processor (revision 0x101) with 20480K/4096K bytes of > memory > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > -- David Madland CCIE# 2016 Sr. Network Engineer Qwest Communications 612-664-3367 "You don't make the poor richer by making the rich poorer." --Winston Churchill Message Posted at: http://www.groupstudy.com/form/read.php?f=7&i=59878&t=59850 -------------------------------------------------- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]