Re: Stus-List Boom vanging...

[John Irvin via CnC-List]

Same feelings on Garhauer.

-----Original Message-----
From: "wwadjo...@aol.com via CnC-List" <cnc-list@cnc-list.com>
Sent: ‎2016-‎01-‎28 1:51 PM
To: "cnc-list@cnc-list.com" <cnc-list@cnc-list.com>
Cc: "wwadjo...@aol.com" <wwadjo...@aol.com>
Subject: Re: Stus-List Boom vanging...

Garhauer. Call and they will walk through sizing, etc.
Bill Walker


Sent from my LG G Pad F™ 8.0, an AT&T 4G LTE tablet


------ Original message------
From: Chuck Saur via CnC-List 
Date: Thu, Jan 28, 2016 12:48 PM
To: cnc-list@cnc-list.com;
Cc: Chuck Saur;
Subject:Stus-List Boom vanging...


Here's another post to get some experience-based advising.  I am looking to 
purchase a rigid boom vang to replace the topping lift (damn thang) which is 
always in the way of everything.   I will also replace the blocks/line I have 
as manual vang. Tangs are built-in on the boom and mast base. I don't want 
hydraulics, but wonder who can recommend which vang/size and other 
considerations (vendor, etc) based on your purchase/use of them.


There is Forespar, Garhauer, Boomkicker, etc.  Some are less expensive but 
appear the same.  Thoughts?








Chuck Saur
Morning Sky
C&C 35-3
Hessel Michigan
_______________________________________________

Email address:
CnC-List@cnc-list.com
To change your list preferences, including unsubscribing -- go to the bottom of 
page at:
http://cnc-list.com/mailman/listinfo/cnc-list_cnc-list.com