Bob — actually, using two separate hoses is a requirement; it’s not safe to 
have any “taps” or tees outside of the propane locker, so all hoses must split 
after the solenoid in the locker and be continuous runs to the end point.

— Fred

Fred Street -- Minneapolis
S/V Oceanis (1979 C&C Landfall 38) -- on the hard in Bayfield, WI   :^(

> On Jan 9, 2019, at 10:15 PM, Robert Boyer via CnC-List 
> <cnc-list@cnc-list.com> wrote:
> 
> Personally, I would use two separate hoses for the devices, both led from the 
> solenoid.  The Trident solenoid is cheap and rusts quickly—I prefer the made 
> by (I can’t think of the name right now) but it is made of aluminum and 
> stainless steel.  There is a lot of condensation that is created in a propane 
> locker—this enables the heavy rusting.
> 
> I also really like the propane controls with the sensor(s) and alarms.  If 
> you need more info, contact me off-list.
> 
> Bob
> 
> Bob Boyer
> s/v Rainy Days
> C&C Landfall 38 (Hull # 230)
> (Presently in Charleston SC for the winter)
> blog: dainyrays.blogspot.com <http://dainyrays.blogspot.com/>
> email: dainyr...@icloud.com <mailto:dainyr...@icloud.com>
> 
> On Jan 9, 2019, at 1:22 PM, T power via CnC-List <cnc-list@cnc-list.com 
> <mailto:cnc-list@cnc-list.com>> wrote:
> 
>> Hi Everyone, I have a propane question. I'm installing a Dickinson 
>> Mediterranean stove with oven and a Dickinson P9000 propane heater. 
>> 
>> The hose needed for the stove is 12 feet, the hose needed for the heater is 
>> 21 feet. 
>> 
>> My question is will I have enough flow (volume) if I use 1/4 id hose verses 
>> 3/8 id hose. The regulator I plan to use is a two stage Trident P/N 
>> 1220-1411.
>> 
>> Any thoughts or suggestions would be greatly appreciated.
>> 
>> Tom Power <http://aka.ms/weboutlook>
>> Invictus
>> C&C 30 MK1
>> Fredericton, NB
_______________________________________________

Thanks everyone for supporting this list with your contributions.  Each and 
every one is greatly appreciated.  If you want to support the list - use PayPal 
to send contribution --   https://www.paypal.me/stumurray

Reply via email to