On Fri, May 26, 2023, 3:11 PM Michael Gielda <mgie...@antmicro.com> wrote:
> Hi Alan, nice to meet you Nathan, > > Indeed, we discussed with Alan some time ago, having a Nuttx-focused > dashboard can be done and we assume would be useful. We just didn’t get to > that as it would have been yet another research project (we are now also > building a U-Boot dashboard, as we added 64-bit Cortex-A support - > https://antmicro.com/blog/2023/04/armv8-a-support-in-renode/ - as well as > Cortex-R). But if there is interest, perhaps it’s worth revisiting the > idea. > > On our end, we base the simulation platform configuration on Zephyr, so we > basically need a mapping of platforms in Nuttx to their “Zephyr names” - we > can start of course with 1-2 and expand to more with time. > > Best regards, > > Michael > Hey Michael, I actually had used renode when added upstream support a few years ago with the QuickLogic EOS S3, and it was quite helpful. That's when I talked a bit about seeing if we could use it as a test platform here. One of the reason I added support to export build artifacts in CI was to enable having downstream stages that can pick up the already generated elf. One thing at the time I hit with the targets I tested was some assumptions around power and clock management that prevented NuttX from booting (waiting for status bits usually). So if we do go down this route I suspect we will need to upstream some of those bits to the emulation which I don't recall being too complicated. If people have a supported platform they would like to see I would be happy to wire a proof of concept through. --Brennan >