On Thu, 27 Mar 2003, Keith Whitwell wrote: > Leif Delgass wrote: > > I removed the alpha component from the visuals because the 32 bit span > > read function in i830_span.c doesn't read alpha from the framebuffer (it > > always returns 255). There's a comment there saying that it should work > > but doesn't. I think that should be fixed before advertising an alpha > > channel. Also, I changed the bufferSize from 32 to 24, so that should be > > changed back to 32 if an alpha channel is advertised. > > OK, I'll look into this. It's odd, because conform was working fine at 32bpp > -- when did you make these changes? > > Keith
It was back when I did a mini-audit of the visuals being exported in several drivers before 4.3.0 (beginning of Feb.). Here's my original message about i830: http://marc.theaimsgroup.com/?l=dri-devel&m=104457580107963&w=2 The thread started here where I posted my orginal list of visuals exported by some of the drivers: http://marc.theaimsgroup.com/?l=dri-devel&m=104448416328979&w=2 There were fixes committed for a few other drivers as well. -- Leif Delgass http://www.retinalburn.net ------------------------------------------------------- This SF.net email is sponsored by: The Definitive IT and Networking Event. Be There! NetWorld+Interop Las Vegas 2003 -- Register today! http://ads.sourceforge.net/cgi-bin/redirect.pl?keyn0001en _______________________________________________ Dri-devel mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/dri-devel
