Wow, thanks to all for the greatly informative answers. I gleaned many
good ideas from them.
This is my concern; I am interested in protecting my K3 from damage by
not being shut down properly should a power interruption occur while the
K3 is operating. For this design, I'm thinking about a worst case
scenario; in transmit mode at 100 watts/20 amps, plus accessories on.
I am concerned about Hydrogen gas while charging a lead-acid battery
here in the furnace room. Since I don't need to operate by battery
power, I'd like to know your thoughts about if a Gel-Cel battery of a 9
amp variety would handle the 20 amp load until I could go to receive
mode and properly shut down?
I haven't had any experience drawing that much amperage from a gel-cel
momentarily. I don't know if the load voltage would be adequate to keep
the K3 alive. I'd need to test it using an older style radio. I'm
hoping someone has had experience related to this.
Thanks in advance for comments,
Dick, n0ce
On 12/22/2014 1:31 AM, Richard Fjeld wrote:
Is anyone floating a battery across their power distribution?
Dick, n0ce
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
