It would be nice to have test point type jacks on the back of the K3 to
test the voltage drop from the PS through the APP's entering the K3.
This would check the accuracy of the K3 volt-meter as well. I don't
remember what it looks like in the vicinity of the APP's.
The next best thing we have is the 12V jack, but I think that has two
diodes in series to it.
Dick, n0ce
On 10/26/2015 12:05 PM, Rich wrote:
Thanks to all. I have check my PS and it does not fluctuate even a
tenth of a volt on TX. With the radio connected directly to the PS.
I am now seeing 14.1 VDC and 12.0 VDC on TX. So I need to look closer
at the wire gauge and connectors. That is still about 2VDC drop.
Thanks for the help
rich
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net
This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com
