This discussion has got me confused.
If a power supply fails, it is pretty easy to fault find.
If you use the correct size cable for the length you require, then it WILL work.
Discussions on APP and test points seem to me to be a little pedantic as apart 
from from a power supply failure I have not had voltage drop issues other than 
killing a large battery bank while exuberantly working a field day operation 
some years ago. I blame Eric for chatting to me too long on that occasion....😊 
From memory the only other fault I have seen was a disconnected APP on the 
board. The owner told me had no idea how that came about. I re-soldered the 
connection and the K3 came back to life.
Caveat emptor......i have always used a heavier DC power lead.

Gary 


-----Original Message-----
From: "Richard Fjeld" <rpfj...@outlook.com>
Sent: ‎27/‎10/‎2015 9:30 AM
To: "elecraft@mailman.qth.net" <elecraft@mailman.qth.net>
Subject: Re: [Elecraft] K3 Voltage on TX

It would be nice to have test point type jacks on the back of the K3 to 
test the voltage drop from the PS through the APP's entering the K3.
This would check the accuracy of the K3 volt-meter as well.  I don't 
remember what it looks like in the vicinity of the APP's.

The next best thing we have is the 12V jack, but I think that has two 
diodes in series to it.

Dick, n0ce


On 10/26/2015 12:05 PM, Rich wrote:
> Thanks to all.  I have check my PS and it does not fluctuate even a 
> tenth of a volt on TX.    With the radio connected directly to the PS. 
> I am now seeing 14.1 VDC and 12.0 VDC on TX.  So I need to look closer 
> at the wire gauge and connectors.  That is still about 2VDC drop.
>
> Thanks for the help
>
> rich
>

______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to vk1zzg...@gmail.com
______________________________________________________________
Elecraft mailing list
Home: http://mailman.qth.net/mailman/listinfo/elecraft
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Elecraft@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html
Message delivered to arch...@mail-archive.com

Reply via email to