As I wrote, frame capture is implemented. Even accesible via USB of some mice...
On 9. August 2015 01:18:26 MESZ, EBo <e...@sandien.com> wrote: >I think you can get access to this sensors images directly. Does this >sensor allow you to download the images directly? I also could not >find >the number of pixels are but I've read a guess of 30x30. > > >On Aug 8 2015 4:37 AM, Julian WIngert wrote: >> Reading the datasheet: >> >> http://datasheet.octopart.com/ADNS-9800-Avago-datasheet-10666463.pdf >> >> Page 13: Path deaviation >> >> It seems that a homogenous surface puts down the error to ~1.25 / >> 1600 >> inch / inch with an optimum @~0.8 /1600 inch / inch with photopaper >> and >> a sensing distance of 2.25mm. >> All at a relatively low speed (6ips) >> >> Combined with a rough syncing (every 2mm) - using a frame capture of >> the >> sensor - you shall be able to get pretty high resolution with a >> minimum >> of effort. >> The sensor itself works up to 150ips and 30g, what the resolution and >> deviation there may be... I dont know. >> >> It is - not recommended for new designs, but I am sure there is >> equivalent stuff out there. > >------------------------------------------------------------------------------ >_______________________________________________ >Emc-developers mailing list >Emc-developers@lists.sourceforge.net >https://lists.sourceforge.net/lists/listinfo/emc-developers -- Diese Nachricht wurde von meinem Mobiltelefon mit Kaiten Mail gesendet. ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
