Do you have a list of mice, or one or two to start looking into, with frame capture? I've only heard about this feature in hacked versions.
On Aug 8 2015 5:22 PM, Julian Wingert wrote: > As I wrote, frame capture is implemented. > Even accesible via USB of some mice... > > On 9. August 2015 01:18:26 MESZ, EBo <e...@sandien.com> wrote: >>I think you can get access to this sensors images directly. Does >> this >>sensor allow you to download the images directly? I also could not >>find >>the number of pixels are but I've read a guess of 30x30. >> >> >>On Aug 8 2015 4:37 AM, Julian WIngert wrote: >>> Reading the datasheet: >>> >>> >>> http://datasheet.octopart.com/ADNS-9800-Avago-datasheet-10666463.pdf >>> >>> Page 13: Path deaviation >>> >>> It seems that a homogenous surface puts down the error to ~1.25 / >>> 1600 >>> inch / inch with an optimum @~0.8 /1600 inch / inch with photopaper >>> and >>> a sensing distance of 2.25mm. >>> All at a relatively low speed (6ips) >>> >>> Combined with a rough syncing (every 2mm) - using a frame capture >>> of >>> the >>> sensor - you shall be able to get pretty high resolution with a >>> minimum >>> of effort. >>> The sensor itself works up to 150ips and 30g, what the resolution >>> and >>> deviation there may be... I dont know. >>> >>> It is - not recommended for new designs, but I am sure there is >>> equivalent stuff out there. >> >>------------------------------------------------------------------------------ >>_______________________________________________ >>Emc-developers mailing list >>Emc-developers@lists.sourceforge.net >>https://lists.sourceforge.net/lists/listinfo/emc-developers ------------------------------------------------------------------------------ _______________________________________________ Emc-developers mailing list Emc-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-developers
