Gary - Or for the less scrupulous than careless, to remove the certification mark from a product and place it one that is not safety certified.
Regards, Peter L. Tarver, PE Product Safety Manager Sanmina Homologation Services peter.tar...@sanmina.com > From: Gary McInturff > > The Product identity may be omitted if the > Mark is directly and > permanently applied to the product, stamping, > molding, ink-stamping.... > I assume that is because you can't > mistakenly put and ITE label on a > medical device or something during manufacture. ------------------------------------------- This message is from the IEEE EMC Society Product Safety Technical Committee emc-pstc discussion list. Visit our web site at: http://www.ewh.ieee.org/soc/emcs/pstc/ To cancel your subscription, send mail to: majord...@ieee.org with the single line: unsubscribe emc-pstc For help, send mail to the list administrators: Michael Garretson: pstc_ad...@garretson.org Dave Heald davehe...@mediaone.net For policy questions, send mail to: Richard Nute: ri...@ieee.org Jim Bacher: j.bac...@ieee.org All emc-pstc postings are archived and searchable on the web at: No longer online until our new server is brought online and the old messages are imported into the new server.
