On Mon, 24 Mar 2008, Kenneth Lerman wrote:

> Date: Mon, 24 Mar 2008 20:31:32 -0400
> From: Kenneth Lerman <[EMAIL PROTECTED]>
> Reply-To: "Enhanced Machine Controller (EMC)"
>     <[email protected]>
> To: "Enhanced Machine Controller (EMC)" <[email protected]>
> Subject: Re: [Emc-users] Jogger wheel + switches
> 
> If you put a little DC bias into the stepper coils, you might be able to
> vary the "detent" action to suit the user.
>
> Ken


Good idea, but if you did, you would probably have to

1. Make the bias a current source (resistor)
2. add ac couplng to the detector


Note that the detent would be 50 DPR (detents per revolution)


>
> ----- Original Message -----
> From: "Ormund Williams" <[EMAIL PROTECTED]>
> To: <[email protected]>
> Sent: Monday, March 24, 2008 8:29 PM
> Subject: Re: [Emc-users] Jogger wheel + switches
>
>
>> On Mon, 2008-03-24 at 17:20 -0700, Peter C. Wallace wrote:
>>> We used 10K input resistor to protect comparator and 510K positive
>>> feedback
>>> resistor on our little adapter board. This gives a sensitivity of ~100
>>> mV.
>>> Might be possible to improve this a little with experimentation...
>>>
>> Thanks for the tip.  I was going to setup a test to see what the output
>> voltage range was.
>>
>> __
>> Ormund
>>
>>
>>
>> -------------------------------------------------------------------------
>> This SF.net email is sponsored by: Microsoft
>> Defy all challenges. Microsoft(R) Visual Studio 2008.
>> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
>> _______________________________________________
>> Emc-users mailing list
>> [email protected]
>> https://lists.sourceforge.net/lists/listinfo/emc-users
>>
>
> -------------------------------------------------------------------------
> This SF.net email is sponsored by: Microsoft
> Defy all challenges. Microsoft(R) Visual Studio 2008.
> http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
> _______________________________________________
> Emc-users mailing list
> [email protected]
> https://lists.sourceforge.net/lists/listinfo/emc-users
>

Peter Wallace
Mesa Electronics

(\__/)
(='.'=) This is Bunny. Copy and paste bunny into your
(")_(") signature to help him gain world domination.


-------------------------------------------------------------------------
This SF.net email is sponsored by: Microsoft
Defy all challenges. Microsoft(R) Visual Studio 2008.
http://clk.atdmt.com/MRT/go/vse0120000070mrt/direct/01/
_______________________________________________
Emc-users mailing list
[email protected]
https://lists.sourceforge.net/lists/listinfo/emc-users

Reply via email to