On Sun, 2009-01-18 at 13:00 +0100, Peter blodow wrote: > - a Graziano SAG12 lathe
> It meant rather complicated programming since the momentary turning > diameter at the tool tip had to be checked at any moment to make sure the > optimum gear was engaged (this would be quite a challenge for a HAL, > wouldn't it?), Is this the lathe with 12 spindle speed gears and electric clutches? I've never seen one switch gears on the fly during a constant surfacing speed cut but that would be a really interesting ability. Rayh ------------------------------------------------------------------------------ This SF.net email is sponsored by: SourcForge Community SourceForge wants to tell your story. http://p.sf.net/sfu/sf-spreadtheword _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users