Paul, What are you using to go from layout to gcode for your pcbs?
On Thu, Aug 8, 2013 at 5:01 PM, Viesturs Lācis <[email protected]>wrote: > 2013/8/8 Paul Lacatus <[email protected]> > > > > > > > Done first steps by running linuxcnc in Xserver Xming on Windows 7 > machine > > : > > > > http://www.paul-lacatus.ro/linuxcnc/Xserver.png > > > Damn, I want that picture on my wallpaper. LinuxCNC on windows :))) > > -- > Viesturs > > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > ------------------------------------------------------------------------------ > Get 100% visibility into Java/.NET code with AppDynamics Lite! > It's a free troubleshooting tool designed for production. > Get down to code-level detail for bottlenecks, with <2% overhead. > Download for free and get started troubleshooting in minutes. > http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk > _______________________________________________ > Emc-users mailing list > [email protected] > https://lists.sourceforge.net/lists/listinfo/emc-users > > ------------------------------------------------------------------------------ Get 100% visibility into Java/.NET code with AppDynamics Lite! It's a free troubleshooting tool designed for production. Get down to code-level detail for bottlenecks, with <2% overhead. Download for free and get started troubleshooting in minutes. http://pubads.g.doubleclick.net/gampad/clk?id=48897031&iu=/4140/ostg.clktrk _______________________________________________ Emc-users mailing list [email protected] https://lists.sourceforge.net/lists/listinfo/emc-users
