Andy, Like I said I would think about using the original motors if I actually had both of them. I only have the X motor here now so I wanted to have matched motors and drives for both axes. Still have a lot of cleaning and scrubbing and rewiring to do before I really have to worry about that so not in a huge hurry hell I may change my mind. Brushless DC motors with resolvers are not cheap on ebay tho. I could buy a complete motor and driver brand new for what I would pay for a used one like I have on the X. The machine has a heavy 1-1 belt drive on both axes so I could actually run about any motor I want on it even a big stepper would work actually but I want to try to go with an AC servo if possible. Peace
Pete On Wed, Oct 29, 2014 at 12:59 PM, andy pugh <bodge...@gmail.com> wrote: > On 29 October 2014 16:47, Pete Matos <petefro...@gmail.com> wrote: > > Mine came with DC > > brushless servos and resolvers > > > My next lathe conversion is very likely to be using brushless DC > servos and resolvers. > I like resolvers. They have super-high precision and are very tolerant > of interference, contamination, heat etc. > > You can probably slot a Mesa 7i49 and 5i23 straight in (the 5i24 is > probably an option too, but I _know_ that there is a 5i23 firmware for > the 5i23 because that is what my mill uses. > > Pico also do a Resolver converter, but that uses quadrature as an > intermediate stage and the reason I like resolvers is that I don't > trust quadrature. > > > http://store.mesanet.com/index.php?route=product/product&path=83_86&product_id=101 > > -- > atp > If you can't fix it, you don't own it. > http://www.ifixit.com/Manifesto > > > ------------------------------------------------------------------------------ > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users > -- Pete Matos A and N Precision and Fabrication Maryville, Tennessee 865-236-8996 ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users