On 29 October 2014 16:47, Pete Matos <petefro...@gmail.com> wrote: > Mine came with DC > brushless servos and resolvers
My next lathe conversion is very likely to be using brushless DC servos and resolvers. I like resolvers. They have super-high precision and are very tolerant of interference, contamination, heat etc. You can probably slot a Mesa 7i49 and 5i23 straight in (the 5i24 is probably an option too, but I _know_ that there is a 5i23 firmware for the 5i23 because that is what my mill uses. Pico also do a Resolver converter, but that uses quadrature as an intermediate stage and the reason I like resolvers is that I don't trust quadrature. http://store.mesanet.com/index.php?route=product/product&path=83_86&product_id=101 -- atp If you can't fix it, you don't own it. http://www.ifixit.com/Manifesto ------------------------------------------------------------------------------ _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users