On Thursday 31 May 2018 19:45:24 jeremy youngs wrote: > Encoders in hand, shaft turned and mounted, it looks good, 3 more to > do . encoderawcount.jpg > <https://drive.google.com/file/d/1oHklBMnxpmTGl-ZzVBCtBkDbsFxwydN_/vie >w?usp=drivesdk>
That does look pretty good at first glance. I can't read the clocking rate though. Humm, I just found the viewer has a zoom. So I assume you were turning it by hand as the timing shows 2/1 variations on a 10 millisecond per grid line, so thats pretty slow. What it looks like at 3 to 5k revs will tell the story. But you are not going to get that display at 3 to 5k in halscope. That will need a good scope, > ---------------------------------------------------------------------- >-------- Check out the vibrant tech community on one of the world's > most engaging tech sites, Slashdot.org! http://sdm.link/slashdot > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users -- Cheers, Gene Heskett -- "There are four boxes to be used in defense of liberty: soap, ballot, jury, and ammo. Please use in that order." -Ed Howdershelt (Author) Genes Web page <http://geneslinuxbox.net:6309/gene> ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, Slashdot.org! http://sdm.link/slashdot _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
