I tried to send some python source code, an xml and text file as attachments, both as the files and in a zip and got the attachment blacklisted reply. Is there another way so everyone on the list can get the attachment. I can put it on my web site but eventually it will disappear rather than end up in archives.
John Dammeyer > -----Original Message----- > From: Earl Weaver [mailto:weaverst...@frontier.com] > Sent: August 22, 2023 8:41 AM > To: emc-users@lists.sourceforge.net > Subject: [Emc-users] Reverse Pulse Control on Dust Collectors > > Hi everyone, > > Does anyone have suggestions what would be a good option > for reverse pulse control on my dust collectors? > > I have 3 separate dust collectors that use (two each) air solenoid valves > to give the filters an alternating 100 millisecond (1/10 second) pulse > to remove the dust from the filters. > I have solid state switch relays (triac) to pulse the 120 volt AC > solenoid valves. > > I already have this setup on my LinuxCNC Plasma cutter and have it > working with ClassicLadder in LinuxCNC. > It seems somewhat overkill to use a full LinuxCNC setup to control these > other three dust collectors. > > Would a micro-controller like Arduino be a better solution? > I have no experience with Arduino. > > What about a PLC? > > Any input, or suggestions? > > Thanks, > Earl > -- > > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
