I think that would be an excellent use for an Arduino. N. Christopher Perry
> On Aug 22, 2023, at 1:01 PM, John Dammeyer <jo...@autoartisans.com> wrote: > > I tried to send some python source code, an xml and text file as > attachments, both as the files and in a zip and got the attachment > blacklisted reply. Is there another way so everyone on the list can get the > attachment. I can put it on my web site but eventually it will disappear > rather than end up in archives. > > John Dammeyer > >> -----Original Message----- >> From: Earl Weaver [mailto:weaverst...@frontier.com] >> Sent: August 22, 2023 8:41 AM >> To: emc-users@lists.sourceforge.net >> Subject: [Emc-users] Reverse Pulse Control on Dust Collectors >> >> Hi everyone, >> >> Does anyone have suggestions what would be a good option >> for reverse pulse control on my dust collectors? >> >> I have 3 separate dust collectors that use (two each) air solenoid valves >> to give the filters an alternating 100 millisecond (1/10 second) pulse >> to remove the dust from the filters. >> I have solid state switch relays (triac) to pulse the 120 volt AC >> solenoid valves. >> >> I already have this setup on my LinuxCNC Plasma cutter and have it >> working with ClassicLadder in LinuxCNC. >> It seems somewhat overkill to use a full LinuxCNC setup to control these >> other three dust collectors. >> >> Would a micro-controller like Arduino be a better solution? >> I have no experience with Arduino. >> >> What about a PLC? >> >> Any input, or suggestions? >> >> Thanks, >> Earl >> -- >> >> >> >> >> _______________________________________________ >> Emc-users mailing list >> Emc-users@lists.sourceforge.net >> https://lists.sourceforge.net/lists/listinfo/emc-users > > > > _______________________________________________ > Emc-users mailing list > Emc-users@lists.sourceforge.net > https://lists.sourceforge.net/lists/listinfo/emc-users _______________________________________________ Emc-users mailing list Emc-users@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/emc-users
