Hello Rob:
I forgot to mention, the tightening sequence is important also:
Right front, Left rear, Left front, Right rear. The right rear is a
sheet metal mount from the case and can have a lot of variance in
height.
Bob
On Dec 10, 2012, at 8:32 PM, frrob wrote:
Bob:
I'll check that heat sink and screws when I get back.
Thanks,
Rob J.
On Monday, December 10, 2012 1:58:59 AM UTC-5, grizzledgiant wrote:
Sorry, Rob, I didn't read down all the way before replying.
About the full fan speed. Mine did that when I first got it (used).
The heat sink screws were loose when I removed it. I put new Arctic
Silver 5 paste on it and made sure the screws were tight. It quieted
down.
Bob
--
You received this message because you are a member of G-Group, a
group for those using G3, G4, and G5 desktop Macs - with a
particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our
netiquette guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list
--
You received this message because you are a member of G-Group, a group for
those using G3, G4, and G5 desktop Macs - with a particular focus on Power Macs.
The list FAQ is at http://lowendmac.com/lists/g-list.shtml and our netiquette
guide is at http://www.lowendmac.com/lists/netiquette.shtml
To post to this group, send email to g3-5-list@googlegroups.com
For more options, visit this group at http://groups.google.com/group/g3-5-list
