Sorry, mistype. Replace "getty" below with "minicom". I'm using the one from thc. -Scott
Scott said: > Hi, > > My leaf box is basically a little celeron on an intel mobo with a cdrom > and floppy. It has 1 serial port which I need to use to connect > through an EIA 232 serial cable to configure my switch vlan. > /var/log/messages shows on boot: > firewall kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A > firewall kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A > > I'm using bering rc4. So far, my attempts at using getty haven't > resulted in a connection to the switch through either of these ports > noted above. Can someone suggest some settings or a command line I > should try in light of my configuration. The switch requires > 9600,8,n,1 settings, typical switch management. > Or, am I on the wrong track here? > > -Scott > > > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
