The link you sent me seems to be instructions for connecting to the leaf box through the serial console. I need to do just the opposite. I need to connect to a switch through the serial port on my leaf box. Please see my other additional comments which I added later. -Scott
Jacques Nilo said: > Le Dimanche 10 Novembre 2002 08:40, Scott a �crit : >> Hi, >> >> My leaf box is basically a little celeron on an intel mobo with a >> cdrom and floppy. It has 1 serial port which I need to use to connect >> through an EIA 232 serial cable to configure my switch vlan. >> /var/log/messages shows on boot: >> firewall kernel: ttyS00 at 0x03f8 (irq = 4) is a 16550A >> firewall kernel: ttyS01 at 0x02f8 (irq = 3) is a 16550A >> >> I'm using bering rc4. So far, my attempts at using getty haven't >> resulted in a connection to the switch through either of these ports >> noted above. Can someone suggest some settings or a command line I >> should try in light of my configuration. The switch requires >> 9600,8,n,1 settings, typical switch management. > Scott: > Have you check: > http://leaf.sourceforge.net/devel/jnilo/buconsole.html > Jacques > > > ------------------------------------------------------- > This sf.net email is sponsored by:ThinkGeek > Welcome to geek heaven. > http://thinkgeek.com/sf > ------------------------------------------------------------------------ > leaf-user mailing list: [EMAIL PROTECTED] > https://lists.sourceforge.net/lists/listinfo/leaf-user > SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf ------------------------------------------------------------------------ leaf-user mailing list: [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/leaf-user SR FAQ: http://leaf-project.org/pub/doc/docmanager/docid_1891.html
