Andy Angrick wrote: > > Thanks for the suggestions so far from both James and Wolfgang, but let me > explain in further detail what i'm looking for. The 'thinserver' i'm > creating doesn't have a monitor or keyboard. It has 2 buttons on the front > and a small 2x20 lcd screen. > done via a webbased interface. The problem is how do you get that first IP > address configured on the box. The RT311 routers we use have no controls, but have a serial port in addition to the network jacks. You can configure the IP address initially using the serial port. Could you give your device a serial port? Regards, Mitch. -- To unsubscribe from this list, send a message to [EMAIL PROTECTED] with the command "unsubscribe linux-embedded" in the message body. For more information, see <http://waste.org/mail/linux-embedded>.
- RE: arp for setting IP address Jerry Van Baren
- Re: arp for setting IP address Tomasz Motylewski
- Re: arp for setting IP address Michael Renzmann
- Re: arp for setting IP address Tomasz Motylewski
- Re: arp for setting IP address Jerry Van Baren
- Re: arp for setting IP address Jean-Luc Lachance
- Re: arp for setting IP address James Oakley
- RE: arp for setting IP address Andy Angrick
- RE: arp for setting IP address John Lombardo
- RE: arp for setting IP address Jerry Van Baren
- Re: arp for setting IP address Mitch Davis
- Re: arp for setting IP address Jay R. Ashworth
- RE: arp for setting IP address Tkatchouk, Pavel
- Non-interactive tftp code Richard A. Smith
- Re: Non-interactive tftp code Michael Renzmann
- Re: Non-interactive tftp code Richard A. Smith
- Re: Non-interactive tftp code Robert Schwebel
- Re: Non-interactive tftp code Michael Renzmann
- Re: Non-interactive tftp code Jerry Van Baren