Yours is more elegant than mine, with the swivel socket and epoxy. Might have to make one like yours. However, mine had a cost of $0, since I had the 1/4" drive set already. I've not felt a need for the swivel - with both a long and short extension to get the ratchet end beyond the manifold.
On Sat, Aug 30, 2008 at 1:19 PM, John Robbins <[EMAIL PROTECTED]> wrote: > I took a 6mm Allen wrench, cut a short section of it off with a Dremel, > and epoxied it into the below socket. After that I just got a nice and > long 1/4" drive extension... works *great* on my 2.5T. Haven't used it > on my '87 300TD yet. See pictures for finished product. > > Craftsman Socket Item# 00943192000 > 6mm socket, six point, 1/4" drive, flex socket > > http://www.sears.com/shc/s/p_10153_12605_00943192000P > > John > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: IMG_0336_s.jpg > Type: image/jpeg > Size: 83375 bytes > Desc: not available > Url : > http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20080830/56a2cea3/attachment.jpg > -------------- next part -------------- > A non-text attachment was scrubbed... > Name: IMG_0337_s.jpg > Type: image/jpeg > Size: 60597 bytes > Desc: not available > Url : > http://okiebenz.com/pipermail/mercedes_okiebenz.com/attachments/20080830/56a2cea3/attachment-0001.jpg > _______________________________________ -- OK Don, KD5NRO Norman, OK "There are three kinds of lies: lies, damn lies, and statistics." -Benjamin Disraeli, popularized by Mark Twain '90 300D (Rattled), '92 300D (Saber), ' '81 240D (Gramps), '97 Ply Grand Voyager (Vincent van-go) _______________________________________ http://www.okiebenz.com For new parts see official list sponsor: http://www.buymbparts.com/ For used parts email [EMAIL PROTECTED] To Unsubscribe or change delivery options go to: http://okiebenz.com/mailman/listinfo/mercedes_okiebenz.com