Hallo > > You should be able to watch what comes into the card at the same > > time on the output of the card even when recording. At least it > > works on the BUZ/DC10/LML33 cards. > > How would you do this with a Marvel? The howto says: > Never try to stop or start the TV application when lavrec runs. If > you start or stop the TV application lavrec will stop recording, or > your computer could get "frozen". Hmm. It works on my BUZ with the new CVS driver. Maybe that is obsolete. Please try it with other cards, if it works there too. I will remove that from the howto if it works everywhere. But you can be soure it didn't work well.
What I tried to say is, but did not: When you start a TV application. This activeates the output plugs of the card. So you can see the video you feed into the card on the device attached to the output auf hoffentlich bald, Berni the Chaos of Woodquarter Email: [EMAIL PROTECTED] [EMAIL PROTECTED] www: http://www.lysator.liu.se/~gz/bernhard ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users