On Wed, 1 Jan 2003, Bernhard Praschinger wrote: > Hallo > > > > You should be able to watch what comes into the card at the same > > > time on the output of the card even when recording. At least it > > > works on the BUZ/DC10/LML33 cards. > > > > How would you do this with a Marvel? The howto says: > > Never try to stop or start the TV application when lavrec runs. If > > you start or stop the TV application lavrec will stop recording, or > > your computer could get "frozen". > Hmm. It works on my BUZ with the new CVS driver. Maybe that is obsolete. > Please try it with other cards, if it works there too. I will remove > that from the howto if it works everywhere. But you can be soure it > didn't work well. > > What I tried to say is, but did not: > When you start a TV application. This activeates the output plugs of the > card. So you can see the video you feed into the card on the device > attached to the output
I'm sure it's mentioned elsewhere, but perhaps that part of the howto should mentioned the preferred (most-likely to work) sequence: Start TV application Start Lavrec Stop Lavrec Stop TV application I think the howto is just trying to avoid starting or stopping the TV app while lavrec is active. my ati won't capture using lavrec, but the capture tool I use did Very Bad Things(tm) when I shutdown xawtv (TV app) while recording. Watching what gets captured works great. happy new year (Gregorian Calendar). ------------------------------------------------------- This sf.net email is sponsored by:ThinkGeek Welcome to geek heaven. http://thinkgeek.com/sf _______________________________________________ Mjpeg-users mailing list [EMAIL PROTECTED] https://lists.sourceforge.net/lists/listinfo/mjpeg-users