Usually the mobo manufacturer makes recommends and non- recommends. Otherwise use high quality reputable DDR PCxxxx one or more label rating above the required (PC2100 for your board). Lower CAS and ns spec's are much more important than the PCxxxx label. Your board requires a minimum of 1000/133.3 = 7.5ns ram.
Cas3 is OK, lower is better. Probly can't use the lower cas timing, but it goes along way towards insuring ram quality.
Here are the bios hardware monitoring outputs, cpu Vcore 1.725 DDR voltage 2.7 cpu temp 50C System temp 32C cpufan 3668 rpm Vcore 1.712 Vtt 1.376 V10 3.264 +5v 5.030 +12v 12.228 -12v -11.989 -5v -5.077 Battery 3.424v +5v SB 4.969
The seem OK to me, I've disabled all the AGP stuff, No improvement in the torture test.
John
--
John Richard Smith
[EMAIL PROTECTED]
Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com