Then what have I been using ?

--- On Tue, 5/5/09, [email protected] <[email protected]> wrote:
From: [email protected] <[email protected]>
Subject: [Nighthawk Lovers] Re: Electrical
To: [email protected]
Date: Tuesday, May 5, 2009, 9:09 AM

Hello
I'm afraid it's false. Induction ammeter relies on induction forces beetween a rotating coil and a magnetic field created by magnets to show the measured value by moving a hand over a graduated scale. I suppose that by "regular" somebody would say the eletronic stuff sold in most shop, with digital display. As a matter of fact, in this last brand, no electromagnetic effec is needed. But what you describe (the coil around the wire in which you want to measure the current), is just a peripheral on the input of the ammeter. It is worth only for AC current : You can't measure DC currents this way. So, on a bike like a nighthawk, no real use except measure the AC current in one of the three phase windings of the stator (yellow wires on the connector at the left side).
Regards
JP


At 11:07 04/05/2009 -0700, you wrote:
The induction ammeter has a coil that encircles the wire in question and the current going through the wire sets up an electromagnetic field that the coil interrupts; strength of current determines voltage induced in the coil which the meter displays as amperage.
Regular ammeter is inline with the flow and measures directly.
I'm not an electrician but I believe this is accurate; any electricians out there, correct if I err...
 
Stanley1e1bd047.jpg

--~--~---------~--~----~------------~-------~--~----~
You received this message because you are subscribed to the Google Groups "Nighthawk Motorcycle Lovers!" group.
To post to this group, send email to [email protected]
To unsubscribe from this group, send email to [email protected]
For more options, visit this group at http://groups.google.com/group/nighthawk_lovers?hl=en
-~----------~----~----~----~------~----~------~--~---


Reply via email to