Hello, >>> ... >>> This has all been taken care for already, OWFS repeats a >>> .../temperature triggered conversion for the case 85°C is the result. >>> When you still have stray 85°C readings, it means your power failures >>> are so serious you should check your hardware setup. >> >> Is that still the case? I thought there was some discussion here >> recently about whether that code is in fact desirable and whether it >> should be removed. Perhaps I misunderstood the conversation. >> > It's still in there, as Stefano found the real bug causing problems with > .../latesttemp.
But this has also an problem (For me). I will read over OWLIB from the OWSERVER values out (Let me say the program collectd will read it with the onewire plugin). I have also not all my sensors (Type 28 = DS18B20) external powered, so the simultanues read of values will not work. On this way the value of latesttemp will be only updated, when the sensor is read on an second way. Only latesttemp will hold his value without any changes. So it is not (For me) complete right working as i was suggesting, that the update of that value will be also made. But this will be never be done. Best regards, Roland ------------------------------------------------------------------------------ Check out the vibrant tech community on one of the world's most engaging tech sites, SlashDot.org! http://sdm.link/slashdot _______________________________________________ Owfs-developers mailing list Owfs-developers@lists.sourceforge.net https://lists.sourceforge.net/lists/listinfo/owfs-developers
