Neil Riley schreef <[EMAIL PROTECTED]>: > LRESPR win1_ipcextuk_bin > This is the SHermes driver, when loaded a prompt should be seen. Where have you connected your mouse? Add a line or direct command: IPCMOUSE n, where n is the serial port for the mouse (5 or 6).
> no mention of the 3.5" DISK DRIVE. > The floppy's never show up with a prompt. The flp1_ light should come up when F1/F2 is pressed. If not, check the cable and drive select settings. When you have it working make a simple Boot floppy: TK2_EXT: LRESPR flp1_ipcextuk_bin This way you will always have access to your system. > Qubide led. > The Qubide led connects to the 2 pins between the 40 way HDD connector and the PCB-through connector, near the PCB edge. Minus is closest to the edge. > This HOT key... so how would i trigger this and also, when theAurora > finished booting, i was aware of a few icons on screen with apadlock but > the mouse seems to have little effect. > The HOT_GO has started the Hotkey job. Check the HOT_LOAD lines for the characters to press with ALT. The padlock is shown when the buttons are set up, the last is the current job. Move the lock to the Basic window (cursor or mouse) and press Space or mouse. > also, how can i access the CD ? > You need to LRESPR 2 files: ATAPIQUB_BIN & CDROM_BIN. Both are in the public domain. Getting there, Bob -- Gemaakt met Opera's revolutionaire e-mailprogramma: http://www.opera.com/mail/ _______________________________________________ QL-Users Mailing List http://www.q-v-d.demon.co.uk/smsqe.htm
