bgp path selection criteria
hi , Anyone here knows which BGP path criteria takes precedence ? AS_PATH or local preference >From what I read it is local preference , but in actual fact it is not so , why I said this is because I have a customer who prepends their prefixes many times then advertise them to us but on our side we set local preference to customers' routes to 90 which in fact will always come back to us if we do this but this is not happening Instead the prefixes go to another providers' link because their AS-PATH is shorter why is that so? Jason _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Two DLCI numbers?
reason is because when building the frame-relay circuit you need to build two parts , one is towards the customer from frame switch the other one is from provider's router to frame-switch , I normally use the same dlci nos for the two parts but you can use different Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jeff McCoy Sent: Friday, November 03, 2000 9:37 PM To: [EMAIL PROTECTED] Subject: Re: Two DLCI numbers? "jeongwoo park" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > Hi all > While I was reading a cisco book, I came across the > fact that DLCI number has only local significance > because there might be more than one DLCI number > associated with one pvc. > Why would any pve in frame relay network have two DLCI > numbers? > I know that DLCI number is given by frame relay > service provider. > Can someone explain this? > > Thanks in adv. > > jeongwoo > > > __ > Do You Yahoo!? > From homework help to love advice, Yahoo! Experts has your answer. > http://experts.yahoo.com/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BGP - maximum-list
Well you can always have a inbound prefix-list at your side to prevent the swamping right? correct me if I am wrong Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Michael Fountain Sent: Wednesday, November 08, 2000 12:02 AM To: [EMAIL PROTECTED] Subject: BGP - maximum-list Has anyone used the maximum-prefix command on a cisco running BGP? It is supposed to keep a neighbor from going crazy and swamping your router with too many routes by limiting the number of routes that can be learned by the router. What would be a good number to set that at to allow a full BGP table, plus growth, and still protect the router. Or does no one use it? _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: acess list question
deny should come before permit also to deny ftp not only must you block port 20 but also port 21 (ftp-data) Jason Yee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sisqo Sent: Tuesday, November 14, 2000 11:08 AM To: [EMAIL PROTECTED] Subject: acess list question Access-list 101 permit ip any any Access-list 101 deny tcp any any eq ftp Why did the above list FAIL to prevent FTP? _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Redistribution od Static Routes
try redistributing connected subnets as well, I am not sure that will help but is worth a try Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Watson, Rick, , OUSDC Sent: Thursday, November 09, 2000 12:58 AM To: [EMAIL PROTECTED] (E-mail) Subject: Redistribution od Static Routes Does the following lines extracted from a configuration redistribute all static routes on the router? Or will I have to go through and add the specific static routes and redistribute them? Trying to t-shoot an issue and was wondering if redistribution of static routes (or lack thereof) was causing problemsIf more info is necessary please contact me offline - extracted lines begin router ospf 989 redistribute static subnets network 192.68.0.0 0.0.255.255 area 0.0.0.0 maximum-paths 2 - extracted lines end - Rick Watson Network Engineer OUSD(Comptroller) 703.697.5710 [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
traffic shaping parameters
hi Anyone knows what the parameter in traffic-shape rate 6144000 153600 153600 1000 indicates , I know I can use ? to find out but I am still not clear about the figures I should use like 6144000 etc. when I want to implement traffic shaping on an interface Jason _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
access-list for DDOS attack
hi , Anyone knows what the parameter in using CAR to rate limit ICMP packets means , for example : interface abc rate-limit output access-group 200 200 512000 786000 transmit exceed-action drop access-list 200 permit icmp any any echo-reply what does the 200, 512000, 786000 means ? thanks Jason _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: !H not a complete answer
thanks -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Donald B Johnson Jr Sent: Tuesday, November 21, 2000 7:03 AM To: Jennifer Cribbs; [EMAIL PROTECTED] Subject: Re: !H not a complete answer wouldn't that be an A response Duck - Original Message - From: Jennifer Cribbs <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Monday, November 20, 2000 10:12 AM Subject: RE: !H not a complete answer This response is returned when an access list somewhere along the path prevents a router from forwarding a packet to the HOST. and that is correct. Jennifer Cribbs [EMAIL PROTECTED] >= Original Message From "Croyle, James" <[EMAIL PROTECTED]> = >http://www.cisco.com/warp/public/112/chapter7.htm > >I think you have a routing loop as is described here. Ping from several >stations and map it out. > >Jim > > >-Original Message- >From: Miller, Nathan (AZ15) >To: Richard Bosire; Jason yee >Cc: John Huston; [EMAIL PROTECTED] >Sent: 11/20/00 11:15 AM >Subject: RE: !H > >Does it meas that the destination NETWORK is unreachable or the >destination >HOST?? > >-Original Message- >From: Richard Bosire [mailto:[EMAIL PROTECTED]] >Sent: Monday, November 20, 2000 8:01 AM >To: Jason yee >Cc: John Huston; [EMAIL PROTECTED] >Subject: Re: !H > > >destination unreachable i.e not path to the destination network > >Jason yee wrote: > >> hi anyone knows what does the symbol !H means in >> traceroute results >> >> __ >> Do You Yahoo!? >> Yahoo! Calendar - Get organized for the holidays! >> http://calendar.yahoo.com/ >> >> _ >> FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >-- >___ >«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤»§«¤»¥«¤ > >Richard Bosire >Network Engineer CCNA,CCSE >AfricaOnline (k) Ltd >tel +254-2-243775 fax +254-2-243762 >http://www.africaonline.co.ke > > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >_ >FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BGP next-hop-self
thanks a million it's crystal clear Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Peter Van Oene Sent: Tuesday, November 07, 2000 2:12 AM To: [EMAIL PROTECTED] Subject: Re: BGP next-hop-self The key requirement here is to ensure that all IBGP routers can resolve (that is find a route to) the BGP provided next hop router for each prefix advertised. This step is fundamental to the proper installation of routes into routing tables. The first way to accomplish this (in the case where the next hop address for a group of prefixes lies on a point to point link) is simply to advertise the external link into the IGP domain. For example, consider this is your edge router interface s0/0 ip address 1.1.1.1 255.255.255.252 interface e0 ip address 10.1.1.1 255.255.255.0 router bgp 1 neighbor 1.1.1.2 as 2 neighbor 10.1.1.2 as 1 neighbor 10.1.1.2 as 1 router ospf 1 network 10.1.1.1 0.0.0.0 area 0 (forgive any syntax, haven't configured cisco in a while) In this case, the peer router in AS 2 will advertise prefixes with a next hope of 1.1.1.2. However, assuming as 1 runs OSPF, you can see that the this router does not advertise the 1.1.1.0/30 subnet into the ospf domain. Hence, all the IBGP neighbors will not know how to get to the 1.1.1.2 router and thus all the prefixes they learn will not be usable. To solve this, you can advertise the 1.1.1.0 subnet by adding it to the ospf process (network 1.1.1.1 0.0.0.0 area 0) or maybe a redistribute connected etc. Or, you can use next hop self "neighbor 10.1.1.2 next-hop-self" to use the 10.1.1.1 address as the next hop for all prefixes learned from 1.1.1.2 via bgp. Does that help? Pete *** REPLY SEPARATOR *** On 11/6/2000 at 2:13 AM suaveguru wrote: >thanks I understand now , but how there is one more >thing that needs u to further clarify and that is the >first soluion that you mention , I dont quite >understand why it will solve the problem > >appreciate if you can elaborate > >thanks > >suaveguru >--- Peter Van Oene <[EMAIL PROTECTED]> wrote: >> When BGP routers learn routes via BGP, they learn >> two key pieces of information; A destination prefix, >> and a next hop address. Within an AS, BGP routers >> communicate with IBGP. Within the AS however, the >> next hop address for each prefix is by default not >> modified. That means that all IBGP routers within >> an AS will maintain a consistent view of the >> external world. >> >> However, consider the following. >> >> R1 AS1 <---> R2 AS2 <---R2 AS2 >> EBGP IBGP >> >> Consider that R1 advertises prefix 10/8 into AS2. >> R2 will learn this 10/8 address and the >> corresponding next hop address. In this case, lets >> say that 11/8 is the subnet between R1 and R2 and >> R1's uses 11.0.0.1 and R2 uses 11.0.0.2. Hence, R2 >> will publish 10/8 with a next hop of 11.0.0.1 in its >> routing table. >> >> R2 will then advertise 10/8 via IBGP to R2 with the >> next hop of 11.0.0.1. However, as 11/8 is an >> external point to point link and may not be a subnet >> that R2 is aware of. If this is the case, R2 will >> not be able to resolve a route toward 11/8 and thus >> will be unable to post the route due to the rules of >> BGP. >> >> Two solutions exist to solve this problem (well two >> pop into my mind). The first way would be to have >> R2 advertise the external link (11/8 in this case) >> into the AS so that all IBGP routers will learn it. >> This however increases the size and complexity of >> the IGP within the AS. >> >> The second option is to have R2 replace the next hop >> address with his own address. Naturally, his own >> address will be known throughout the AS (BGP depends >> on TCP so this has to be the case) and thus when R2 >> receives the 10/8 advertisement, it will see R2's >> interface as the next hop and thus be able to >> resolve the bgp next hop and post the route. >> >> I hope this makes sense :) >> >> Pete >> >> >> >> >> *** REPLY SEPARATOR *** >> >> On 11/3/2000 at 11:58 AM suaveguru wrote: >> >> >hi , >> > >> >Anyone knows what does next-hop-self in bgp means >> >please explain to me >> > >> >thanks >> > >> >suaveguru >> > >> >__ >> >Do You Yahoo!? >> >>From homework help to love advice, Yahoo! Experts >> has your answer. >> >http://experts.yahoo.com/ >> > >> >_ >> >FAQ, list archives, and subscription info: >> http://www.groupstudy.com/list/cisco.html >> >Report misconduct and Nondisclosure violations to >> [EMAIL PROTECTED] >> >> >> >> _ >> FAQ, list archives, and subscription info: >> http://www.groupstudy.com/list/cisco.html >> Report misconduct and Nondisclosure violations to >[EMAIL PROTECTED] > > >__ >Do You Yahoo!? >Thousa
RE: IP route cache
if I am not wrong ip route-cache enable fast-switching while no ip route-cache disables fast-switching and drops to process switching so that's really a matter of enabling switching types between interfaces hope this helps Jason Yee -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tony Russell Sent: Wednesday, November 08, 2000 11:04 PM To: '[EMAIL PROTECTED]' Subject: IP route cache Can someone describe why I would want to use the ip route-cache (or no ip route-cache) command. I've found references on the Cisco site about how to use it, but not why. Tony Russell Network Engineer IBEAM Broadcasting _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help with BGP ge and le options
We normally use it for prefix list for example ip prefix-list as1234 permit 202.161.130.28/19 le 24 will indicate that we allow this block of network to be accepted by us including its subnets right up to prefix 24 which means that if your customers need to subnetwork this block of ip and want us to advertise it we need not do anything since we have put le24 in the prefix list already hope this helps Jason -Original Message- From: [EMAIL PROTECTED] To: CiscoGroupstudy Sent: 10/23/00 11:58 PM Subject: Help with BGP ge and le options Could someone clearly explain what these options do and an example of how are they used. Thanks = JZ [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Messenger - Talk while you surf! It's FREE. http://im.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CRC error
Can be many possibilities could be clock rate on modem not set to exact speed. fautly modem etc Jason -Original Message- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: 10/23/00 6:50 AM Subject: CRC error Hi cisco guru, I have a lease line(connected to serial port).I get about 60% crc error per day on the line.What could be the cause and any solutions? Thanks Regards Ramesh Get FREE Email/Voicemail with 15MB at Lycos Communications at http://comm.lycos.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: How to get Console message and Debug output by telnet?
A word of caution here, be very careful about using debug it will eat up all the resources on the router I would recommend using it only on the last resort. However using debug with an access-list can reduce checking on all the traffic but the ones specified on the access-list Jason -Original Message- From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: 10/19/00 8:33 PM Subject: Re: How to get Console message and Debug output by telnet? Use the command: terminal monitor That should do the trick. Andy Xing wrote: > How can I get debug message display when I use telnet to config a router? > > Thanks in advanced > > Andy Xing > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: keepalive set in frame-relay circuit?
thanks -Original Message- From: Stull, Cory [mailto:[EMAIL PROTECTED]] Sent: Thursday, October 12, 2000 11:05 PM To: Yee, Jason; 'Flem'; cisco@groupstudy. com (E-mail) Subject: RE: keepalive set in frame-relay circuit? I'm not sure what setting the frame-relay keepalive to 0 would do. If your router wasn't receiving LMI to begin with than you are probably getting a false line protocol up reading. LMI is needed so that the frame-switch can tell the router the status of the pvc's and dlci's on that circuit. If the switch and router aren't talking then the router probably doesn't know about the PVCs it has to get to remote locations... Hope I didn't get off track I just skimmed your question. Cory -Original Message- From: Yee, Jason [mailto:[EMAIL PROTECTED]] Sent: Monday, October 09, 2000 1:57 AM To: 'Flem'; cisco@groupstudy. com (E-mail) Subject: RE: keepalive set in frame-relay circuit? can't catch what you are trying to say Jason -Original Message- From: Flem [mailto:[EMAIL PROTECTED]] Sent: Monday, October 09, 2000 2:48 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: keepalive set in frame-relay circuit? Yee , inline . --- "Yee, Jason" <[EMAIL PROTECTED]> wrote: > hi anyone > > knows why after having set my keepalive to be zero > my frame-relay circuit > straight away went up ie line protocol is up > > I believe there is no need to set keepalive as the > LMI is taking care of it > right? Keep-alives on a frame-relay interface implements LMI on that interface . ( do sh int ser#/# and look for the LMI settings ) flem > > Correct me if I am wrong > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more > information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free! http://photos.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCDA?
any good materials to intro? -Original Message- From: William E Gragido [mailto:[EMAIL PROTECTED]] Sent: Wednesday, October 11, 2000 4:47 AM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: RE: CCDA? Yes, study those case studies in detail! They are tedious > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Yee, Jason > Sent: Tuesday, October 10, 2000 1:10 AM > To: cisco@groupstudy. com (E-mail) > Subject: CCDA? > > > hi anyone > > got any tips on CCDA? > > jASON > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: keepalive set in frame-relay circuit?
thank you very much your explanation is crystal clear -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, October 10, 2000 1:50 PM To: [EMAIL PROTECTED] Subject: RE: keepalive set in frame-relay circuit? 10 seconds is the default, and should generally be fine. Your circuit is probably down for some other reason. Is this a test setup, with the routers connected back-to back (or with another cisco as a switch), or is the frame relay circuit a 'real' circuit from a telco? Assuming it's a real circuit, try the 'show frame lmi' command. Your 'num status enq. sent' and 'num status msgs recv' values should be the same (or very similar), and non-zero. If they aren't the same, clear the counters, wait a minute or so, and check again. If you are not receiving any LMI messages, then you're not talking to the frame relay switch. This is not a good thing. Either your router config is wrong (wrong encapsulation? wrong lmi type? could be a few things) or the telco service is broken (or dud hardware, potentially). If the LMI looks OK, try the command 'show frame pvc', or turn on term mon and do a 'debug frame lmi' (it's a fairly safe debug to do even in a production environment, unless your routers are very overloaded or you have zillions of PVCs. But I take no responsibility if it breaks your network :-). See what PVCs are defined, and which ones the telco knows about. See if they match what you think they should be. With the debug frame lmi command, you will see (hopefully) LMI messages coming from the switch. Check that they're coming in every ten seconds. If not, change your keepalive to match. Every now and again (every minute on mine, YMMV) the LMI message will include the status of all the PVCs the switch knows about, and their status (I believe the exact format of the messages varies between frame switch types. On mine, an active PVC has status 0x2, and an inactive one has status 0x0). Even if you force the interface up/up by fiddling with the keepalives, it won't pass any data if the circuit's broken. JMcL ------ Forwarded by Jenny Mcleod/NSO/CSDA on 10/10/2000 04:33 pm ----------- "Yee, Jason" <[EMAIL PROTECTED]> on 10/10/2000 11:49:45 am Please respond to "Yee, Jason" <[EMAIL PROTECTED]> To: "'Jay Hennigan'" <[EMAIL PROTECTED]> "'[EMAIL PROTECTED]'" <[EMAIL PROTECTED]> cc:(bcc: JENNY MCLEOD/NSO/CSDA) Subject: RE: keepalive set in frame-relay circuit? if that is the case setting keepalives to what value is optimal? 10 , I tried setting it to 10 but it went down Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jay Hennigan Sent: Monday, October 09, 2000 5:35 PM To: [EMAIL PROTECTED] Subject: Re: keepalive set in frame-relay circuit? On 9 Oct 2000 01:54:14 -0400, Yee, Jason <[EMAIL PROTECTED]> wrote: :hi anyone : :knows why after having set my keepalive to be zero my frame-relay circuit :straight away went up ie line protocol is up The keepalive setting on a frame-relay interface determines the LMI interval. Turning it off stops the router from sending or expecting LMI. :I believe there is no need to set keepalive as the LMI is taking care of it :right? The keepalive of an interface with frame-relay encapsulation _is_ LMI. :Correct me if I am wrong Can you pass traffic over the interface with no keepalive? No keepalive is a means of forcing an interface into an up-up state from the router's viewpoint even if the interface may in fact be disconnected. While this is useful for test purposes, it doesn't carry any traffic. While the interface shows "line protocol is up" with or without anything plugged in it isn't going to move data from point A to point B. If it _is_ connected, and the other end also is set to "no keepalive", then in most cases you can use it to pass data. However, this is not usually a good idea because the routers will have no means of detecting a link failure (other than timeouts on a dynamic routing protocol). If this frame-relay interface is connected to a real carrier's frame switch, then the "no keepalive" will cause the router to stop sending LMI, which will cause the carrier's switch to show the link as inactive. You may be able to make it work in a lab situation with no keepalive on a router configured as a frame switch, but it isn't a good idea. As a rule, keepalives are a good thing on an active interface passing real-world traffic, and turning them off should not be necessary to bring the line protocol up. -- Jay Hennigan - Network Administration - [EMAIL PROTECTED] NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix
CCDA?
hi anyone got any tips on CCDA? jASON **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCRAN
ISDN, BRI, PRI, AAA, FRAME-RELAY (MUST KNOW ), X.25 , TACACS+ and etc. Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of SH Wesson Sent: Monday, October 09, 2000 9:01 PM To: [EMAIL PROTECTED] Subject: BCRAN Can anyone give me some tips as to how to study for the BCRAN (640-505 exam) exam. I'm studying for it and am schedule for another week or so to take the exam. Tips on what topics to study and what may be on the exam would be helpfu. Thanks. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: keepalive set in frame-relay circuit?
it's a receive-only dish the customer has a terrestrial link for the return path Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jay Hennigan Sent: Tuesday, October 10, 2000 11:34 AM To: [EMAIL PROTECTED] Subject: Re: keepalive set in frame-relay circuit? On 9 Oct 2000 22:50:50 -0400, Yee, Jason <[EMAIL PROTECTED]> wrote: :this interface is connected to a comstream modem (satellite modem) then out :as a satellite link to frame-relay switch Check with Comstream. Do they specify frame-relay encapsulation? When you say "modem", is it a regular RS-232 modem? Is the satellite two-way to you? Is it a VSAT and you're transmitting to the bird, or is it a receive-only dish and you're using dial-up for the return path? Is it an asynchronous modem? Have you tried "encapsulation frame-relay IETF" on the interface? It sounds as if you really need to get some specifics from the satellite carrier as to exactly what interface configuration they expect. :On 9 Oct 2000 20:58:12 -0400, Yee, Jason <[EMAIL PROTECTED]> wrote: ::if that is the case setting keepalives to what value is optimal? :: ::10 , I tried setting it to 10 but it went down : :To what, if anything, is this interface physically connected? -- Jay Hennigan - Network Administration - [EMAIL PROTECTED] NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: keepalive set in frame-relay circuit?
this interface is connected to a comstream modem (satellite modem) then out as a satellite link to frame-relay switch Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jay Hennigan Sent: Tuesday, October 10, 2000 10:01 AM To: [EMAIL PROTECTED] Subject: Re: keepalive set in frame-relay circuit? On 9 Oct 2000 20:58:12 -0400, Yee, Jason <[EMAIL PROTECTED]> wrote: :if that is the case setting keepalives to what value is optimal? : :10 , I tried setting it to 10 but it went down To what, if anything, is this interface physically connected? -- Jay Hennigan - Network Administration - [EMAIL PROTECTED] NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: keepalive set in frame-relay circuit?
if that is the case setting keepalives to what value is optimal? 10 , I tried setting it to 10 but it went down Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Jay Hennigan Sent: Monday, October 09, 2000 5:35 PM To: [EMAIL PROTECTED] Subject: Re: keepalive set in frame-relay circuit? On 9 Oct 2000 01:54:14 -0400, Yee, Jason <[EMAIL PROTECTED]> wrote: :hi anyone : :knows why after having set my keepalive to be zero my frame-relay circuit :straight away went up ie line protocol is up The keepalive setting on a frame-relay interface determines the LMI interval. Turning it off stops the router from sending or expecting LMI. :I believe there is no need to set keepalive as the LMI is taking care of it :right? The keepalive of an interface with frame-relay encapsulation _is_ LMI. :Correct me if I am wrong Can you pass traffic over the interface with no keepalive? No keepalive is a means of forcing an interface into an up-up state from the router's viewpoint even if the interface may in fact be disconnected. While this is useful for test purposes, it doesn't carry any traffic. While the interface shows "line protocol is up" with or without anything plugged in it isn't going to move data from point A to point B. If it _is_ connected, and the other end also is set to "no keepalive", then in most cases you can use it to pass data. However, this is not usually a good idea because the routers will have no means of detecting a link failure (other than timeouts on a dynamic routing protocol). If this frame-relay interface is connected to a real carrier's frame switch, then the "no keepalive" will cause the router to stop sending LMI, which will cause the carrier's switch to show the link as inactive. You may be able to make it work in a lab situation with no keepalive on a router configured as a frame switch, but it isn't a good idea. As a rule, keepalives are a good thing on an active interface passing real-world traffic, and turning them off should not be necessary to bring the line protocol up. -- Jay Hennigan - Network Administration - [EMAIL PROTECTED] NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: keepalive set in frame-relay circuit?
can't catch what you are trying to say Jason -Original Message- From: Flem [mailto:[EMAIL PROTECTED]] Sent: Monday, October 09, 2000 2:48 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: keepalive set in frame-relay circuit? Yee , inline . --- "Yee, Jason" <[EMAIL PROTECTED]> wrote: > hi anyone > > knows why after having set my keepalive to be zero > my frame-relay circuit > straight away went up ie line protocol is up > > I believe there is no need to set keepalive as the > LMI is taking care of it > right? Keep-alives on a frame-relay interface implements LMI on that interface . ( do sh int ser#/# and look for the LMI settings ) flem > > Correct me if I am wrong > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more > information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: > http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: > http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Do You Yahoo!? Yahoo! Photos - 35mm Quality Prints, Now Get 15 Free! http://photos.yahoo.com/ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
keepalive set in frame-relay circuit?
hi anyone knows why after having set my keepalive to be zero my frame-relay circuit straight away went up ie line protocol is up I believe there is no need to set keepalive as the LMI is taking care of it right? Correct me if I am wrong thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: what is mean reverse telnet ?
The term reverse Telnet means that you are initiating a Telnet session out the asynchronous line, instead of accepting a connection into the line (which is a forward connection). To establish a reverse Telnet session to a modem, determine the IP address of your LAN (Ethernet) interface, then enter a Telnet command to port 2000 + n on the access server, where n is the line number to which the modem is connected. For example, to connect to the modem attached to line 1, enter the following command from an EXEC session on the access server: router# telnet 172.16.1.10 2001 Trying 172.16.1.10, 2001 ... Open -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Sim, CT (Chee Tong) Sent: Thursday, October 05, 2000 3:20 PM To: 'WANG'; '[EMAIL PROTECTED]' Subject: what is mean reverse telnet ? Dear Friends, May I know what is meant by reverse telnet? How we use it with access server? Tong == De informatie opgenomen in dit bericht kan vertrouwelijk zijn en is uitsluitend bestemd voor de geadresseerde. Indien u dit bericht onterecht ontvangt wordt u verzocht de inhoud niet te gebruiken en de afzender direct te informeren door het bericht te retourneren. == The information contained in this message may be confidential and is intended to be exclusively for the addressee. Should you receive this message unintentionally, please do not use the contents herein and notify the sender immediately by return e-mail. == **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BGP problem
How did you manage to solve it? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Raymond Mak Sent: Tuesday, October 03, 2000 11:50 AM To: [EMAIL PROTECTED] Subject: Re: BGP problem I have solved the problem now. Regards, Raymond Mak Raymond Mak wrote: > Hi, > > I have local and global connection to Internet. > When I trace from local site to internal network, it passes through > local connection, and when I trace from global site to internal network, > it can pass through global connection. But the strange thing is when I > trace from internal network to local site and global site, it all passes > through global connection. > How can I configure to make it works when trace from internal network? > Are the "distribute-list" and "route-map" configuration (not my config.) > make it bad? Actually what exactly are they? > > Thanks > > Regards, > Raymond > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: yet another new CCNP..
hi , Congratulations I would like to take CIT as well please furnish me with more information to pass this test Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Stull, Cory Sent: Tuesday, October 03, 2000 5:45 AM To: '[EMAIL PROTECTED]' Subject: yet another new CCNP.. Passed CIT today for my CCNP..I would like to thank everyone on this list that contributes helpful info.. and also including Prescilla for her wonderful flashcards. The CIT was very poorly written. The questions were vague and unclear with more than one correct answer many times... Had to sift through the garbage to find the right answer. I used the McGraw Hill CIT book and I don't think it covered all of the material very well. I had more than I expected on Appletalk and the questions were a little more in depth than I was expecting but I still passed with a 769... I'll say again though I think the test was written poorly... and not because I wasn't prepared. Thanks again to everyone on the list that contributes. Now on to CCDP... Any good book recommendations or tips or study guides please forward to me... Thanks Cory R. Stull MCSE, Bay Router Specialist, CCNP,CCDA Communications Concepts Unlimited 262-814-7214 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCRAN passed!!
70% -Original Message- From: Rah Sta [mailto:[EMAIL PROTECTED]] Sent: Tuesday, October 03, 2000 3:57 AM To: Yee, Jason; [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: RE: BCRAN passed!! Jason, How much ISDN was on the exam? Raheem >From: "Yee, Jason" <[EMAIL PROTECTED]> >Reply-To: "Yee, Jason" <[EMAIL PROTECTED]> >To: "'Avran'" <[EMAIL PROTECTED]>,"'[EMAIL PROTECTED]'" ><[EMAIL PROTECTED]> >Subject: RE: BCRAN passed!! >Date: Mon, 2 Oct 2000 00:15:03 -0500 > >a bit of hands on DDR, quite a bit on ISDN and thanks > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of >Avran >Sent: Monday, October 02, 2000 10:03 AM >To: [EMAIL PROTECTED] >Subject: Re: BCRAN passed!! > > >Congratulations! How much hands on did you have? Keep the pace. >avran >"Yee, Jason" <[EMAIL PROTECTED]> wrote in message >859B90209E2FD311BE5600902751445D35F0E6@LYNX">news:859B90209E2FD311BE5600902751445D35F0E6@LYNX... > > hi all > > > > I want to share this joy with the rest of the guys in the group that I >have > > successfully passed the BCRAN exam . Although the marks are not high but >a > > pass is a pass. Next to go is Support 2.0 before I can get my CCNP . >Anyone > > got any pointers or tips for this exam? > > > > thanks for all your help and support for BCRAN > > Jason > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
bgp flapping due to serial down for a while but administratively shut down bgp wont work??
hi all, I have tried administratively shut down BGP when my serial link goes down for a while but it didn't work Administratively shutting down the BGP won't help much in this case. It can only prevent the Serial flapping to not affect the BGP. But after the Serial is stable, then I turn the BGP up again then the BGP will start flapping. Because there was once I move my router to another UPS which means I have to shut down the router, after the serial is up and stable the BGP still flapping. It was outside the sun outage window and the serial was stable before and after I move my router but the BGP is flapping. There was once also I tried to temporarily not advertising any routes to you to prevent my network get dampened. The serial is stable but the BGP is flapping. This is almost the same with shutting down the BGP like you advised. But this way I can see whether my BGP is flapping or not without risking my network to be dampened. With the BGP shutted down I cannot see whether the BGP is stable or not. Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: route table
thank you very much for your explanation Jason -Original Message- From: Jay Hennigan [mailto:[EMAIL PROTECTED]] Sent: Monday, October 02, 2000 3:16 PM To: Yee, Jason Cc: 'whatshakin'; '[EMAIL PROTECTED]' Subject: RE: route table On Mon, 2 Oct 2000, Yee, Jason wrote: > I am wondering if I could use this clear ip bgp * if I encounter bgp > flapping due to serial down for a while and then up again . This is because > my bgp is fully functionally receiving all the routes only after a few hours > after my serial went down and up again for 2 minutes Not a good idea. Every time you do it, the rest of the net sees a route flap from you. Too many flaps over a period of time, and others will "damp" your advertisements, ignoring them for what can be rather lengthy periods of time. If you see the session flapping due to serial line issues on one link, why would you want to clear the entire BGP routing table? This will just cause problems with your other sessions. If you're having line problems with one of your BGP peers that is causing the session to flap, it's a good idea to admin down the BGP session with that neighbor until the problem is fixed and the line is stable. In router config mode: (config-router)# neighbor www.xxx.yyy.zzz shutdown To restore once the line is fixed, (config-router)# no neighbor www.xxx.yyy.zzz shutdown This will allow your other BGP sessions to continue unaffected. Then call telco or whatever you need to do to isolate the serial line problem without causing route flap and trying to push customer data over a flaky line. Turn the session up once you've fixed the line problem. If the line is flaky enough so as not to keep a stable TCP 179 connection, it isn't going to be much good for much else, so shut it down and get it fixed. "clear ip bgp *" will flap all sessions on that router, making things quite unstable for a period, especially if you're a transit provider or have IBGP sessions going as well, as they'll flap and spike CPU on your other internal routers. If you're single homed over a single link, consider a static default instead of BGP. Your router and your upstream will be much happier. -- Jay Hennigan - Network Administration - [EMAIL PROTECTED] NetLojix Communications, Inc. NASDAQ: NETX - http://www.netlojix.com/ WestNet: Connecting you to the planet. 805 884-6323 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: route table
hi, I am wondering if I could use this clear ip bgp * if I encounter bgp flapping due to serial down for a while and then up again . This is because my bgp is fully functionally receiving all the routes only after a few hours after my serial went down and up again for 2 minutes Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of whatshakin Sent: Monday, October 02, 2000 2:08 AM To: [EMAIL PROTECTED] Subject: Re: route table clear ip bgp * Don't do this on a production network during business hours! - Original Message - From: Raymond Mak <[EMAIL PROTECTED]> Newsgroups: groupstudy.cisco To: <[EMAIL PROTECTED]> Sent: Sunday, October 01, 2000 9:47 AM Subject: route table > Hi, > > Would you tell me how to flush the bgp routing table to make it learn > again? > > Thanks > > Regards, > Raymond > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCRAN passed!!
a bit of hands on DDR, quite a bit on ISDN and thanks -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Avran Sent: Monday, October 02, 2000 10:03 AM To: [EMAIL PROTECTED] Subject: Re: BCRAN passed!! Congratulations! How much hands on did you have? Keep the pace. avran "Yee, Jason" <[EMAIL PROTECTED]> wrote in message 859B90209E2FD311BE5600902751445D35F0E6@LYNX">news:859B90209E2FD311BE5600902751445D35F0E6@LYNX... > hi all > > I want to share this joy with the rest of the guys in the group that I have > successfully passed the BCRAN exam . Although the marks are not high but a > pass is a pass. Next to go is Support 2.0 before I can get my CCNP . Anyone > got any pointers or tips for this exam? > > thanks for all your help and support for BCRAN > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
weird bgp flapping problems!!
hi anyone knows why when my link goes down for 2 mins and up again BGP is still flapping and regains its full functionality only after several hours , by right it should come up by itself quite fast after the serial came up right . It should not be down for several hours when my link is only down for 2 minutes . Any form of input would be greatly appreciated thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCRAN passed!!
I am not sure of the differences as I did not take CMTD jASON -Original Message- From: Leonard Ong [mailto:[EMAIL PROTECTED]] Sent: Wednesday, November 01, 2000 10:27 AM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: BCRAN passed!! Hello guys, Sorry for repeating questions, how much the CMTD and BCRAN differs ? I am going to take CCNP v.2 if I have the chance :) Thanks Regards, Leonard Ong, ST, CCNP R&S+Voice, CCDP R&S, CSE, SAIR&GNU LCP, MCP, BCP PT. Internusa Data Digitalindo **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCRAN passed!!
hi all I want to share this joy with the rest of the guys in the group that I have successfully passed the BCRAN exam . Although the marks are not high but a pass is a pass. Next to go is Support 2.0 before I can get my CCNP . Anyone got any pointers or tips for this exam? thanks for all your help and support for BCRAN Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCRAN Exam
so for those who pass BCRAN on Friday How's it ? Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
trace route results
hi all, If trace route results are cumulative then how come the 11th hop shows higher latency time than 12th hop Type escape sequence to abort. Tracing the route to 202.159.96.0 1 nero-eugene-hub.oregon-ix.net (198.32.162.2) [AS 2914] 0 msec 0 msec 0 msec 2 eugn-core1-gw.nero.net (207.98.64.162) [AS 3701] 0 msec 0 msec 4 msec 3 xcore2-serial0-1-0-0.SanFrancisco.cw.net (204.70.32.5) [AS 3561] 12 msec 12 msec 12 msec 4 core9.SanFrancisco.cw.net (204.70.9.81) [AS 3561] 12 msec 12 msec 12 msec 5 cw-gw.sffca.ip.att.net (192.205.31.13) [AS 7018] 88 msec 84 msec 88 msec 6 gbr2-p11.sffca.ip.att.net (12.123.12.242) [AS 7018] 84 msec 88 msec 84 msec 7 gar1-p370.sffca.ip.att.net (12.123.13.61) [AS 7018] 84 msec 84 msec 84 msec 8 12.123.195.21 [AS 7018] 144 msec 148 msec 148 msec 9 12.125.94.6 [AS 7018] 144 msec 148 msec 152 msec 10 202.161.130.21 [AS 11919] 152 msec 144 msec 152 msec 11 202.161.128.38 [AS 11919] 1132 msec 688 msec 756 msec 12 Subnet-Gateway.indo.net.id (202.159.33.32) [AS 4622] 716 msec 720 msec 796 msec 13 * * * 14 * * * 15 * * * 16 * * * 17 * * * 18 * * * 19 * õ trace route times are cumulative **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ospf bandwidth question
CRC errors could be due to modem clocking rate not configured properly etc. FECNs are generated when data is sent out a congested interface; they indicate to a DTE that congestion was encountered. Traffic is marked with BECN if the queue for the opposite direction is deep enough to trigger FECNs at the current time. BECNs notify the sender to decrease the transmission rate. If the traffic is one-way only (such as multicast traffic), there is no reverse traffic with BECNs to notify the sender to slow down. Thus, when a DTE receives an FECN, it first determines if it is sending any data in return. If it is sending return data, this data will get marked with a BECN on its way to the other DTE. However, if the DTE is not sending any data, the DTE can send a Q.922 TEST RESPONSE message with the BECN bit set. Whenever you have BECNS or FECNS it could be that a powerful link is sending data down a not so powerful link , e.g. a T1 link sending data down a 56 K link and when packets reaches the 56 K side the link may not be able to take it and hence the BECNS bit is set You may want to implement adaptive traffic-shaping based on BECNS Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Stull, Cory Sent: Thursday, September 28, 2000 11:24 PM To: '[EMAIL PROTECTED]' Subject: ospf bandwidth question If I am getting many CRC errors and FECNs and BECNs on the frame-relay network what would be a cause of that? Could it be that I didn't have the bandwidth statement set to the CIR of the PVC??? Thanks Cory R. Stull MCSE, Bay Router Specialist, CCNA,CCDA Communications Concepts Unlimited 262-814-7214 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CatOS or IOS?
I thought only the RSM rounds IOS? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ray Lovett Sent: Wednesday, September 27, 2000 10:46 PM To: [EMAIL PROTECTED] Subject: CatOS or IOS? Hi Folks, I have recently purchased a Catalyst 6509 to replace one of my Catalyst 5000's. I've noticed that you have the choice to run CatOS 5.x as usual or convert the whole switch over to IOS 12.x. I've also been buying some of the new Catalyst 3548-XL's and they too run the IOS 12.x image's. My question to the group is: what would be the advantages/disadvantages of either software? Thanks, Ray Lovett Network Engineer The Richards Group Dallas, TX 214.891.5841 [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: strange situation
thank you -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 28, 2000 11:46 AM To: Yee, Jason Cc: cisco@groupstudy. com (E-mail) Subject: RE: strange situation between hop 19 and 20...probably a congested wan linkthe "last mile"..cheap oversubscribed bandwidth probably. Brian On Wed, 27 Sep 2000, Yee, Jason wrote: > at which point ? > > > thanks > Jason > > -Original Message- > From: Brian [mailto:[EMAIL PROTECTED]] > Sent: Thursday, September 28, 2000 11:41 AM > To: Yee, Jason > Cc: cisco@groupstudy. com (E-mail) > Subject: Re: strange situation > > > > most likely a congested link. > > On Wed, 27 Sep 2000, Yee, Jason wrote: > > > hi guys or gals > > > > Got this strange scenario whereby when I traceroute to a destination ip > > address it shows high latency times between the last two hops : attatched > > results below > > > > 312 ms12 ms12 ms 203.117.0.90 > > 414 ms24 ms24 ms f0-0-r21.cyberway.com.sg [203.117.0.132] > > 513 ms15 ms14 ms 61.8.230.1 > > 614 ms23 ms24 ms 61.8.254.91 > > 7 119 ms 118 ms 120 ms 210.175.161.137 > > 8 120 ms 119 ms 119 ms tyo-i1.tyo-core1.ntt.net [210.175.160.43] > > 9 222 ms 223 ms 221 ms sjc-i1.tyo-sjc1.ntt.net [210.175.160.98] > > 10 224 ms 225 ms 225 ms p1-1-2-3.r06.plalca01.us.bb.verio.net > > [129.250.1 > > 6.21] > > 11 233 ms 232 ms 232 ms p4-1-0-0.r00.lsanca01.us.bb.verio.net > > [129.250.2 > > .114] > > 12 238 ms 237 ms 236 ms p1.att.r00.lsanca01.us.bb.verio.net > > [129.250.9.3 > > 4] > > 13 240 ms 239 ms 239 ms gbr3-p50.la2ca.ip.att.net [12.123.28.130] > > 14 226 ms 226 ms 227 ms gbr4-p20.sffca.ip.att.net [12.122.2.69] > > 15 234 ms 234 ms 234 ms gbr2-p100.sffca.ip.att.net [12.122.1.190] > > 16 236 ms 234 ms 234 ms gar1-p370.sffca.ip.att.net [12.123.13.61] > > 17 290 ms 291 ms 291 ms 12.123.195.21 > > 18 292 ms 293 ms 291 ms 12.125.94.10 > > 19 277 ms 279 ms 278 ms 202.161.130.21 > > 20 861 ms 861 ms 861 ms 202.161.128.202 > > > > Trace complete. > > > > > > > > > > Pinging 202.161.128.202 with 32 bytes of data: > > > > Reply from 202.161.128.202: bytes=32 time=856ms TTL=238 > > Reply from 202.161.128.202: bytes=32 time=854ms TTL=238 > > Reply from 202.161.128.202: bytes=32 time=854ms TTL=238 > > Reply from 202.161.128.202: bytes=32 time=853ms TTL=238 > > > > > > > > > > But when I do a traceroute or ping from second last hop to the destination > > the trace and ping times seems ok > > > > Router>ping 202.161.128.202 > > > > Type escape sequence to abort. > > Sending 5, 100-byte ICMP Echos to 202.161.128.202, timeout is 2 seconds: > > ! > > Success rate is 100 percent (5/5), round-trip min/avg/max = 580/583/584 ms > > Router>trace 202.161.128.202 > > > > Type escape sequence to abort. > > Tracing the route to 202.161.128.202 > > > > 1 202.161.128.202 572 msec 572 msec 580 msec > > > > > > Any form of input will be greatly appreciated > > > > > > Jason > > > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > --- > Brian Feeny, CCNP, CCDA [EMAIL PROTECTED] > Network Administrator > ShreveNet Inc. (ASN 11881) > --- Brian Feeny, CCNP, CCDA [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: strange situation
at which point ? thanks Jason -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 28, 2000 11:41 AM To: Yee, Jason Cc: cisco@groupstudy. com (E-mail) Subject: Re: strange situation most likely a congested link. On Wed, 27 Sep 2000, Yee, Jason wrote: > hi guys or gals > > Got this strange scenario whereby when I traceroute to a destination ip > address it shows high latency times between the last two hops : attatched > results below > > 312 ms12 ms12 ms 203.117.0.90 > 414 ms24 ms24 ms f0-0-r21.cyberway.com.sg [203.117.0.132] > 513 ms15 ms14 ms 61.8.230.1 > 614 ms23 ms24 ms 61.8.254.91 > 7 119 ms 118 ms 120 ms 210.175.161.137 > 8 120 ms 119 ms 119 ms tyo-i1.tyo-core1.ntt.net [210.175.160.43] > 9 222 ms 223 ms 221 ms sjc-i1.tyo-sjc1.ntt.net [210.175.160.98] > 10 224 ms 225 ms 225 ms p1-1-2-3.r06.plalca01.us.bb.verio.net > [129.250.1 > 6.21] > 11 233 ms 232 ms 232 ms p4-1-0-0.r00.lsanca01.us.bb.verio.net > [129.250.2 > .114] > 12 238 ms 237 ms 236 ms p1.att.r00.lsanca01.us.bb.verio.net > [129.250.9.3 > 4] > 13 240 ms 239 ms 239 ms gbr3-p50.la2ca.ip.att.net [12.123.28.130] > 14 226 ms 226 ms 227 ms gbr4-p20.sffca.ip.att.net [12.122.2.69] > 15 234 ms 234 ms 234 ms gbr2-p100.sffca.ip.att.net [12.122.1.190] > 16 236 ms 234 ms 234 ms gar1-p370.sffca.ip.att.net [12.123.13.61] > 17 290 ms 291 ms 291 ms 12.123.195.21 > 18 292 ms 293 ms 291 ms 12.125.94.10 > 19 277 ms 279 ms 278 ms 202.161.130.21 > 20 861 ms 861 ms 861 ms 202.161.128.202 > > Trace complete. > > > > > Pinging 202.161.128.202 with 32 bytes of data: > > Reply from 202.161.128.202: bytes=32 time=856ms TTL=238 > Reply from 202.161.128.202: bytes=32 time=854ms TTL=238 > Reply from 202.161.128.202: bytes=32 time=854ms TTL=238 > Reply from 202.161.128.202: bytes=32 time=853ms TTL=238 > > > > > But when I do a traceroute or ping from second last hop to the destination > the trace and ping times seems ok > > Router>ping 202.161.128.202 > > Type escape sequence to abort. > Sending 5, 100-byte ICMP Echos to 202.161.128.202, timeout is 2 seconds: > ! > Success rate is 100 percent (5/5), round-trip min/avg/max = 580/583/584 ms > Router>trace 202.161.128.202 > > Type escape sequence to abort. > Tracing the route to 202.161.128.202 > > 1 202.161.128.202 572 msec 572 msec 580 msec > > > Any form of input will be greatly appreciated > > > Jason > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNP, CCDA [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BCRAN exam this Saturday?
same to you -Original Message- From: Cisco [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 28, 2000 11:07 AM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: RE: BCRAN exam this Saturday? Jason, I am taking mine Friday. Good luck on your exam! This is my second Cisco Exam. If anyone would mine sharing with me as well. Thanks > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Yee, Jason > Sent: Wednesday, September 27, 2000 6:31 PM > To: cisco@groupstudy. com (E-mail) > Subject: BCRAN exam this Saturday? > > > hi > > I am taking Remote Access 2.0 this Saturday any last minute pointers and > tips for this exam > > thanks > > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: RADB - BGP routing
I think that is their block for globally recognised address other than that it is not globally recongisable. Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Benny Leong (HTHK - Senior Engineer II - iServices Development, NNSD) Sent: Wednesday, September 27, 2000 12:15 PM To: '[EMAIL PROTECTED]'; 'Spolidoro, Guilherme' Subject: RE: RADB - BGP routing >From the ARIN, there is a statement shown below : *The minimum block of IP address space assigned by ARIN is a /20. Smaller blocks obtained directly from ARIN are the least likely to be globally routable. What does that mean ? Thanks. -- From: Spolidoro, Guilherme [SMTP:[EMAIL PROTECTED]] Sent: Monday, September 25, 2000 9:15 PM To: '[EMAIL PROTECTED]' Subject: RE: RADB - BGP routing You can find a lot of information about RADB on the RADB.net web site. The problem is that I never found some examples or explanations on how large ISPs use the information stored on the IRRd servers on real life. Maybe somebody with more experience could comment about that. Anyway, RADB runs an IRRd server that is used to store each ISP routing policy, for example: what are your AS numbers, your networks, what networks you'll accept from ISP xxx or what networks you're going to advertise to ISP (just two simple examples). You write your policy using a specific language (like an script) that can be used to configure the BGP on your NAP/MAE routers. There are serveral IRRd servers and RADB.net host the "official" one for the US. RIPE has another server for Europe and some ISPs have their own server. I'm not sure why an ISP would want to have his own IRRd server, but my guess is that they probably use that information to know what are their customers's BGP policies for them, i.e. what networks their customers will advertise for them so they can configure the BGP filters properly. I know of at least one ISP that won't accept any advertisement from their customers unless register on the RADB IRRd server. It's my opinion that since everybody can use the information on the IRRd servers as they want, it's always good to keep it up to date so you don't have somebody blocking your networks because you didn't register your latest policy there. Good luck. -Original Message- From: Benny Leong (HTHK - Senior Engineer II - iServices Development, NNSD) [mailto:[EMAIL PROTECTED]] Sent: Monday, September 25, 2000 2:09 AM To: '[EMAIL PROTECTED]' Subject: RADB - BGP routing What is the use of RADB ? Is it a must to register AS number and the route to the RADB ? **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
strange scenario
hi guys and gals One strange scenario that happens is that when I ping and traceroute to a destination 202.161.128.202 from internet : It shows high latency times between the last 2 hops : 312 ms12 ms12 ms 203.117.0.90 414 ms24 ms24 ms f0-0-r21.cyberway.com.sg [203.117.0.132] 513 ms15 ms14 ms 61.8.230.1 614 ms23 ms24 ms 61.8.254.91 7 119 ms 118 ms 120 ms 210.175.161.137 8 120 ms 119 ms 119 ms tyo-i1.tyo-core1.ntt.net [210.175.160.43] 9 222 ms 223 ms 221 ms sjc-i1.tyo-sjc1.ntt.net [210.175.160.98] 10 224 ms 225 ms 225 ms p1-1-2-3.r06.plalca01.us.bb.verio.net [129.250.1 6.21] 11 233 ms 232 ms 232 ms p4-1-0-0.r00.lsanca01.us.bb.verio.net [129.250.2 .114] 12 238 ms 237 ms 236 ms p1.att.r00.lsanca01.us.bb.verio.net [129.250.9.3 4] 13 240 ms 239 ms 239 ms gbr3-p50.la2ca.ip.att.net [12.123.28.130] 14 226 ms 226 ms 227 ms gbr4-p20.sffca.ip.att.net [12.122.2.69] 15 234 ms 234 ms 234 ms gbr2-p100.sffca.ip.att.net [12.122.1.190] 16 236 ms 234 ms 234 ms gar1-p370.sffca.ip.att.net [12.123.13.61] 17 290 ms 291 ms 291 ms 12.123.195.21 18 292 ms 293 ms 291 ms 12.125.94.10 19 277 ms 279 ms 278 ms 202.161.130.21 20 861 ms 861 ms 861 ms 202.161.128.202 Trace complete. Pinging 202.161.128.202 with 32 bytes of data: Reply from 202.161.128.202: bytes=32 time=856ms TTL=238 Reply from 202.161.128.202: bytes=32 time=854ms TTL=238 Reply from 202.161.128.202: bytes=32 time=854ms TTL=238 Reply from 202.161.128.202: bytes=32 time=853ms TTL=238 However when I do a ping and traceroute on my second last router it shows healthy ping times between this router and the destination Router>ping 202.161.128.202 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 202.161.128.202, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 580/583/584 ms Router>trace 202.161.128.202 Type escape sequence to abort. Tracing the route to 202.161.128.202 1 202.161.128.202 572 msec 572 msec 580 msec Why is this so and is there really a latency problem and if so at which point is latency at ? thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
BCRAN exam this Saturday?
hi I am taking Remote Access 2.0 this Saturday any last minute pointers and tips for this exam thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
strange situation
hi guys or gals Got this strange scenario whereby when I traceroute to a destination ip address it shows high latency times between the last two hops : attatched results below 312 ms12 ms12 ms 203.117.0.90 414 ms24 ms24 ms f0-0-r21.cyberway.com.sg [203.117.0.132] 513 ms15 ms14 ms 61.8.230.1 614 ms23 ms24 ms 61.8.254.91 7 119 ms 118 ms 120 ms 210.175.161.137 8 120 ms 119 ms 119 ms tyo-i1.tyo-core1.ntt.net [210.175.160.43] 9 222 ms 223 ms 221 ms sjc-i1.tyo-sjc1.ntt.net [210.175.160.98] 10 224 ms 225 ms 225 ms p1-1-2-3.r06.plalca01.us.bb.verio.net [129.250.1 6.21] 11 233 ms 232 ms 232 ms p4-1-0-0.r00.lsanca01.us.bb.verio.net [129.250.2 .114] 12 238 ms 237 ms 236 ms p1.att.r00.lsanca01.us.bb.verio.net [129.250.9.3 4] 13 240 ms 239 ms 239 ms gbr3-p50.la2ca.ip.att.net [12.123.28.130] 14 226 ms 226 ms 227 ms gbr4-p20.sffca.ip.att.net [12.122.2.69] 15 234 ms 234 ms 234 ms gbr2-p100.sffca.ip.att.net [12.122.1.190] 16 236 ms 234 ms 234 ms gar1-p370.sffca.ip.att.net [12.123.13.61] 17 290 ms 291 ms 291 ms 12.123.195.21 18 292 ms 293 ms 291 ms 12.125.94.10 19 277 ms 279 ms 278 ms 202.161.130.21 20 861 ms 861 ms 861 ms 202.161.128.202 Trace complete. Pinging 202.161.128.202 with 32 bytes of data: Reply from 202.161.128.202: bytes=32 time=856ms TTL=238 Reply from 202.161.128.202: bytes=32 time=854ms TTL=238 Reply from 202.161.128.202: bytes=32 time=854ms TTL=238 Reply from 202.161.128.202: bytes=32 time=853ms TTL=238 But when I do a traceroute or ping from second last hop to the destination the trace and ping times seems ok Router>ping 202.161.128.202 Type escape sequence to abort. Sending 5, 100-byte ICMP Echos to 202.161.128.202, timeout is 2 seconds: ! Success rate is 100 percent (5/5), round-trip min/avg/max = 580/583/584 ms Router>trace 202.161.128.202 Type escape sequence to abort. Tracing the route to 202.161.128.202 1 202.161.128.202 572 msec 572 msec 580 msec Any form of input will be greatly appreciated Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: about gigabit network question
You can use g or gi it work still work if you use sh ip g 1/0/0 or gi 1/0/0 Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Zhang Jin Sent: Wednesday, September 27, 2000 10:47 AM To: [EMAIL PROTECTED] Subject: about gigabit network question Hi group, I have a question that is ,you know, e represent ethernet interface,fa represent fast-ethernet interface,what is the gigabit network symbal? thanks dean **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
tracing nat entries
hi all Wonder if anyone could tell me how I could troubleshoot by using trace-routing on NAT entries ? Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: BECN s on Frame-Relay
You might want to try configuring adaptive traffic-shaping based on BECN to reduce your congestion Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Tom Pruneau Sent: Tuesday, September 26, 2000 2:00 AM To: Patrick Stiever; '[EMAIL PROTECTED]' Subject: Re: BECN s on Frame-Relay BECNs are mesages from the network; sourced by the network switches which the telco has control over, they are used to inform end devices or frame-relay subscribers (like yourself) that they (the telco switch) have entered a congested state. If elevated traffic levels continue the switch will begin to relieve congestion by selectively discarding frames with the DE (discard eligible) bit set to one. In other words these messages (BECNs) are intended to make users aware of a possible degraded network state. Its a warning (from the Telco) saying if you're over utilizing your link, back off because we're gonna have to start dropping frames if this congestion doesn't subside. If you notice continual accrual of BECNs causing you grief (delays, latency etc) you might want to get the telco to reconfigure your path (PVC) through their network. At 09:26 AM 09/25/2000 -0700, Patrick Stiever wrote: >Ladies and Gentlemen, > > I have question on BECN s on a Frame-Relay Link. What would I have >to configure on the Routers to eliminate them, would it be a matter of >setting up buffers? Any info would be helpful. Thanks. > > >Patrick Stiever >Communications Engineer >24 Hour Fitness >(760) 918 4459 >[EMAIL PROTECTED] > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > Tom Pruneau Trainer Network Operations GENUITY 3 Van de Graff Drive Burlington Ma. 01803 24 Hr. Network Operations Center 800-436-8489 If you need to get a hold of me my hours are 7AM-3PM ET Mon-Fri --- This email is composed of 82% post consumer recycled data bits --- "Once in a while you get shown the light in the strangest of places if you look at it right" **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Loopback Interface
loopback interface is an always up interface and it will not go down since it is a virtual interface unlike physical interfaces which may be physically down sometimes. It is not necessary to use loopback for a point-to-point connection but you are advised to use probably because it will be more reliable to map frame-relay dlci no to loopback ip addresses since that will guarantee that the frame-relay map is always reliable Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of NRS Hariharan Sent: Saturday, September 23, 2000 5:12 AM To: [EMAIL PROTECTED] Subject: Loopback Interface Hi all, What is a Loopback Interface and what is it's use ?.. Can anyone help me out.. In configuring FrameRelay for point-to-point connection, loopback inetrface is been advised why ?? thanks in advance . hari Get free email and a permanent address at http://www.netaddress.com/?N=1 **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
setup up BGP session on simplex connection`
hi , Anyone got any ideas how one could setup BGP session on a simplex connection ? Any form of input will be greatly appreciated thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ip classless
With this command if a route is not found in the routing table it will take the gateway of last resort if it is set . Without this command it will just drop the packet if a classful route is not found in the routing table. Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Hubert Pun Sent: Friday, September 22, 2000 4:55 AM To: Cisco Study Group Subject: ip classless What does this command do? thanks in advance **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
GRE, udlr
hi anyone anyone knows how to implement UDLR and GRE tunnel for Uni-directional routing over satellite links? Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: what is unmumbered?
ip unumbered is an interface configuration command. If you type in ip unnumbered ethernet 0 it means that the interface that you type in this command has ip address that takes the value from ethernet 0 You often do this where you have a lot of async interfaces for dialing in but you only want to worry about a single ip address for all these async interfaces for routing purposes Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of rsma Sent: Friday, September 22, 2000 2:12 PM To: [EMAIL PROTECTED] Subject: what is unmumbered? **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
simplex connection via EBGP Multihop
hi , all Just wondering how one could implement EBGP multihop via a simplex connection Any input will be greatly appreciated Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: commands to configure 700 series routers?
Even including the non-IOS commands we must know? -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Friday, September 22, 2000 11:16 AM To: Yee, Jason Cc: cisco@groupstudy. com (E-mail) Subject: Re: commands to configure 700 series routers? Cisco 700 is testable just like the outline on cisco says, and cisco 700 is on the bcran test. Brian On Thu, 21 Sep 2000, Yee, Jason wrote: > Hi all > > Do we need to know the commands to configure 700 series routers for the > Remote Access Exam since I found such information in my BCRAN course > material . Should I study or should I skip for the exam? > > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNA, CCDA [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: commands to configure 700 series routers?
including the non-ISO commands -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Friday, September 22, 2000 11:16 AM To: Yee, Jason Cc: cisco@groupstudy. com (E-mail) Subject: Re: commands to configure 700 series routers? Cisco 700 is testable just like the outline on cisco says, and cisco 700 is on the bcran test. Brian On Thu, 21 Sep 2000, Yee, Jason wrote: > Hi all > > Do we need to know the commands to configure 700 series routers for the > Remote Access Exam since I found such information in my BCRAN course > material . Should I study or should I skip for the exam? > > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNA, CCDA [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
commands to configure 700 series routers?
Hi all Do we need to know the commands to configure 700 series routers for the Remote Access Exam since I found such information in my BCRAN course material . Should I study or should I skip for the exam? thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
isdn authentication qn
hi all, Am I right to say that once ppp authentication chap for cisco ppp is enabled the username and password of both routers must be the same as their corresponding hostnames also both sides of the routers must have the same passwords? any input will be greatly appreciated Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: copy configs
Title: copy configs There is a software utility call CRT which allows you to copy and paste on the fly unlike Telnet Jason -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED]Sent: Wednesday, September 20, 2000 12:14 AMTo: [EMAIL PROTECTED]Subject: RE: copy configs Also you can copy it as a text file (notepad) and copy it back on to the other router. Patrick Kuyper -Original Message-From: Nguyen_Trang [mailto:[EMAIL PROTECTED]]Sent: dinsdag 19 september 2000 17:53To: 'Provost, Rob'; '[EMAIL PROTECTED]'Subject: RE: copy configs If no changes are to be made, download Cisco's configuration maker. Connect it to router A, get the config. Connect it to route B and deliver the config. -Original Message-From: Provost, Rob [mailto:[EMAIL PROTECTED]]Sent: Monday, September 18, 2000 3:26 PMTo: '[EMAIL PROTECTED]'Subject: copy configs How can I copy the configs from one router and then copy them to another? Both are 2500s. Thanks. Robert Provost
RE: link down problem
But a loopback of the interface shows line protocol down as well -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Omar Baceski Sent: Tuesday, September 19, 2000 8:40 PM To: cisco@groupstudy. com (E-mail) Subject: RE: link down problem i suspect that the problem is at the FR switch... if you remember the dlci status are: active: both ends and switch working inactive: near end and switch working, remote end dead deleted: the switch does not recognice the dlci number. i can see that in one of your routers you have an ACTIVE dlci, so it must be up with another peer. maybe you have a misconfiguration in the switching table at the switch... i hope it helps. > -Mensaje original- > De: Yee, Jason [SMTP:[EMAIL PROTECTED]] > Enviado el: Monday, September 18, 2000 11:38 PM > Para: cisco@groupstudy. com (E-mail) > Asunto: link down problem > > hi fellow studymates, > > Need your comments on this particular problem > > It seems that one side pvc active the other pvc inactive and LMI down > > I have confirmed the following LMI type correct , could not ping on either > side > > Can it be the side that the pvc is down is due to physical layer problem ? > > > need your comments on this > > thanks > > Situation goes this way : > > configuration of router at one end : > > Router#sh run > Building configuration... > Current configuration: > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname Router > ! > ! > ! > interface Ethernet0 > no ip address > shutdown > ! > interface Serial0 > ip address 202.161.128.158 255.255.255.252 > encapsulation frame-relay IETF > no fair-queue > frame-relay interface-dlci 659 > frame-relay lmi-type ansi > ! > ip classless > ip route 0.0.0.0 0.0.0.0 202.161.128.157 > ! > line con 0 > line vty 0 4 > login > ! > end > Router#sh int s0 > Serial0 is up, line protocol is down (looped) > Internet address is 202.161.128.158/30 > MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely 211/255, load 1/255 > Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10 sec) > LMI enq sent 18, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down > LMI enq recvd 18, LMI stat sent 0, LMI upd sent 0 > LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE > Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 > Last input 00:00:09, output 00:00:00, output hang never > Last clearing of "show interface" counters never > Queueing strategy: fifo > Output queue 0/40, 0 drops; input queue 0/75, 0 drops > 5 minute input rate 0 bits/sec, 0 packets/sec > 5 minute output rate 0 bits/sec, 0 packets/sec > 693 packets input, 37348 bytes, 0 no buffer > Received 72 broadcasts, 0 runts, 0 giants, 0 throttles > 831 input errors, 1 CRC, 820 frame, 0 overrun, 0 ignored, 10 abort > 962 packets output, 87013 bytes, 0 underruns > 0 output errors, 0 collisions, 2890 interface resets > 0 output buffer failures, 0 output buffers swapped out > 12 carrier transitions > DCD=up DSR=up DTR=up RTS=up CTS=up > --More-- > Router#sh frame-relay pvc > PVC Statistics for interface Serial0 (Frame Relay DTE) > DLCI = 659, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0 > > input pkts 0 output pkts 0 in bytes 0 > out bytes 0 dropped pkts 0 in FECN pkts 0 > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 > in DE pkts 0 out DE pkts 0 > out bcast pkts 0 out bcast bytes 0 > pvc create time 02:03:22, last time pvc status changed 02:03:22 > Router# > > configuration of router at the other end > kap-cdr-02>sh frame-relay pvc 659 > > PVC Statistics for interface Hssi4/0 (Frame Relay DTE) > > DLCI = 659, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = > Hssi4/0.659 > > input pkts 598 output pkts 120463 in bytes 154900 > out bytes 42196627 dropped pkts 3 in FECN pkts 0 > > in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 > > in DE pkts 0 out DE pkts 0 > out bcast pkts 8614 out bcast bytes 3101040 > pvc create time 1w5d, last time pvc status changed 5d15h > kap-cdr-02> > Hssi4/0.659 (up): point-to-point dlci, dlci 659(0x293,0xA430), broadcast > status defined, active > > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archiv
RE: link down problem
thank you I suspect it is the other side , not my side that is causing the problem. Since a loop back test indicates that the line protocol is down as well Jason -Original Message- From: Peter Simmons [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 19, 2000 5:51 PM To: Yee, Jason; [EMAIL PROTECTED] Subject: Re: link down problem Jason, I would suspect a FR service provider fault then. The status of "inactive" for the PVC indicates the problem lies downstream/upstream of this router. >From Internetworking Troubleshooting Handbook p533 (Cisco Press) Frame Relay: Cannot ping Remote Router DLCI Inactive or deleted: Step 2: If the output from Step 1 (SHOW FRAME-RELAY PVC command) shows that the PVC is deleted or inactive, there is a problem along the path to the remote router. Check the remote router or contact your carrier to check the status ofthe PVC. Hope this helps Regards Pete S. /DISCLAIMER All the ususal legal rubbish means that if If your house burns down after reading this, it's NOT my fault, OK! /DISCLAIMER OFF -Original Message- From: Yee, Jason <[EMAIL PROTECTED]> To: 'Peter Simmons' <[EMAIL PROTECTED]>; [EMAIL PROTECTED] <[EMAIL PROTECTED]> Date: 19 September 2000 10:19 Subject: RE: link down problem >This is the hangover from testing not the cause after loop back is disabled >the line protocol still show down > >Jason > >-Original Message- >From: Peter Simmons [mailto:[EMAIL PROTECTED]] >Sent: Tuesday, September 19, 2000 1:27 PM >To: Yee, Jason; [EMAIL PROTECTED] >Subject: Re: link down problem > > > >Jason, > >(Lots of stuff snipped) > >The output from "show int s0" > >>Router#sh int s0 >>Serial0 is up, line protocol is down (looped) >>Internet address is 202.161.128.158/30 > >shows the interface is looped at the CSU/DSU, doesn't it? > >Is this just a hangover from testing, or is this the cause? > >Regards > >Pete S. > >/DISCLAIMER >All the ususal legal rubbish means that if If your house burns down after >reading this, it's NOT my fault, OK! >/DISCLAIMER OFF > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: link down problem
ok will try that out , thanks a lot Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Simon Sent: Tuesday, September 19, 2000 10:00 PM To: [EMAIL PROTECTED] Subject: Re: link down problem If you check the output from the router: LMI enq sent 18, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down this shows that the router is making LMI enquires of the switch [LMI enq sent 18], but is not receiving replies [LMI stat recvd 0] - ie. the LMI has not been activated on the local link. At the opposite end things will appear OK as the router has the LMI activated at that end. Use show fr map to see if dlci 659 has mapped to a different IP address. Remember that the dlci number only has local significance, they do not have to match at both ends. I agree with Omar that it is likely that the pvc's are misconfigured if you are active on one end and not the other. Get the service provider to confirm that LMI is activated, if your interface does not go up and up, get them to put a loopback to you, and sh int to see if it loops. If it does not, it is likely that they have not cabled the opposite end of your line in the exchange. Once the interface goes up and up, the LMI stat recvd will increment with the LMI enq sent. This will confirm that the router is talking to the switch. Then you can use sh fr pvc to see which pvcs have been built, and sh fr map to see what they can see at the opposite end. Cheers, Si "Omar Baceski" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > i suspect that the problem is at the FR switch... > > if you remember the dlci status are: > active: both ends and switch working > inactive: near end and switch working, remote end dead > deleted: the switch does not recognice the dlci number. > > i can see that in one of your routers you have an ACTIVE dlci, so it must be > up with another peer. maybe you have a misconfiguration in the switching > table at the switch... > > i hope it helps. > > > > -Mensaje original- > > De: Yee, Jason [SMTP:[EMAIL PROTECTED]] > > Enviado el: Monday, September 18, 2000 11:38 PM > > Para: cisco@groupstudy. com (E-mail) > > Asunto: link down problem > > > > hi fellow studymates, > > > > Need your comments on this particular problem > > > > It seems that one side pvc active the other pvc inactive and LMI down > > > > I have confirmed the following LMI type correct , could not ping on either > > side > > > > Can it be the side that the pvc is down is due to physical layer problem ? > > > > > > need your comments on this > > > > thanks > > > > Situation goes this way : > > > > configuration of router at one end : > > > > Router#sh run > > Building configuration... > > Current configuration: > > ! > > version 11.2 > > no service password-encryption > > no service udp-small-servers > > no service tcp-small-servers > > ! > > hostname Router > > ! > > ! > > ! > > interface Ethernet0 > > no ip address > > shutdown > > ! > > interface Serial0 > > ip address 202.161.128.158 255.255.255.252 > > encapsulation frame-relay IETF > > no fair-queue > > frame-relay interface-dlci 659 > > frame-relay lmi-type ansi > > ! > > ip classless > > ip route 0.0.0.0 0.0.0.0 202.161.128.157 > > ! > > line con 0 > > line vty 0 4 > > login > > ! > > end > > Router#sh int s0 > > Serial0 is up, line protocol is down (looped) > > Internet address is 202.161.128.158/30 > > MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely 211/255, load 1/255 > > Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10 sec) > > LMI enq sent 18, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down > > LMI enq recvd 18, LMI stat sent 0, LMI upd sent 0 > > LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE > > Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 > > Last input 00:00:09, output 00:00:00, output hang never > > Last clearing of "show interface" counters never > > Queueing strategy: fifo > > Output queue 0/40, 0 drops; input queue 0/75, 0 drops > > 5 minute input rate 0 bits/sec, 0 packets/sec > > 5 minute output rate 0 bits/sec, 0 packets/sec > > 693 packets input, 37348 bytes, 0 no buffer > > Received 72 broadcasts, 0 runts, 0 giants, 0 throttles > > 831 input errors, 1 CRC, 820 frame, 0 overrun, 0 ignored, 10 abort > > 962 packets output, 87013 bytes, 0 underruns > > 0 output errors, 0 collisions, 2890 interface resets > > 0 o
RE: link down problem
This is the hangover from testing not the cause after loop back is disabled the line protocol still show down Jason -Original Message- From: Peter Simmons [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 19, 2000 1:27 PM To: Yee, Jason; [EMAIL PROTECTED] Subject: Re: link down problem Jason, (Lots of stuff snipped) The output from "show int s0" >Router#sh int s0 >Serial0 is up, line protocol is down (looped) >Internet address is 202.161.128.158/30 shows the interface is looped at the CSU/DSU, doesn't it? Is this just a hangover from testing, or is this the cause? Regards Pete S. /DISCLAIMER All the ususal legal rubbish means that if If your house burns down after reading this, it's NOT my fault, OK! /DISCLAIMER OFF **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: link down problem
I am positive that I am looking at the same pvc -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 19, 2000 1:59 PM To: [EMAIL PROTECTED] Subject: link down problem Don't forget that the DLCI is only locally significant - just because a PVC has DLCI 659 on one end doesn't mean that it will necessarily be 659 at the other end. Are you sure you're looking at two ends of the same PVC?] JMcL -- Forwarded by Jenny Mcleod/NSO/CSDA on 19/09/2000 04:59 pm ------- "Yee, Jason" <[EMAIL PROTECTED]> on 19/09/2000 01:38:29 pm Please respond to "Yee, Jason" <[EMAIL PROTECTED]> To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> cc:(bcc: JENNY MCLEOD/NSO/CSDA) Subject: link down problem hi fellow studymates, Need your comments on this particular problem It seems that one side pvc active the other pvc inactive and LMI down I have confirmed the following LMI type correct , could not ping on either side Can it be the side that the pvc is down is due to physical layer problem ? need your comments on this thanks Situation goes this way : configuration of router at one end : Router#sh run Building configuration... Current configuration: ! version 11.2 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Router ! ! ! interface Ethernet0 no ip address shutdown ! interface Serial0 ip address 202.161.128.158 255.255.255.252 encapsulation frame-relay IETF no fair-queue frame-relay interface-dlci 659 frame-relay lmi-type ansi ! ip classless ip route 0.0.0.0 0.0.0.0 202.161.128.157 ! line con 0 line vty 0 4 login ! end Router#sh int s0 Serial0 is up, line protocol is down (looped) Internet address is 202.161.128.158/30 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely 211/255, load 1/255 Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10 sec) LMI enq sent 18, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 18, LMI stat sent 0, LMI upd sent 0 LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:09, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 693 packets input, 37348 bytes, 0 no buffer Received 72 broadcasts, 0 runts, 0 giants, 0 throttles 831 input errors, 1 CRC, 820 frame, 0 overrun, 0 ignored, 10 abort 962 packets output, 87013 bytes, 0 underruns 0 output errors, 0 collisions, 2890 interface resets 0 output buffer failures, 0 output buffers swapped out 12 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up --More-- Router#sh frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 659, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 pvc create time 02:03:22, last time pvc status changed 02:03:22 Router# configuration of router at the other end kap-cdr-02>sh frame-relay pvc 659 PVC Statistics for interface Hssi4/0 (Frame Relay DTE) DLCI = 659, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Hssi4/0.659 input pkts 598 output pkts 120463 in bytes 154900 out bytes 42196627 dropped pkts 3 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 8614 out bcast bytes 3101040 pvc create time 1w5d, last time pvc status changed 5d15h kap-cdr-02> Hssi4/0.659 (up): point-to-point dlci, dlci 659(0x293,0xA430), broadcast status defined, active **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Clocking Question
I think it can be summarised as such if the modem is providing clocking to the router then modem is the DCE device router is the DTE device whereas as in the case of the lab scenario where we do not have a modem then we need to join two routers together to simulate a WAN link then for the virtual WAN link to work one of the routers need to provide the clocking . The router which provides the clocking is the DCE device while the router which receives the clocking is the DTE device . To find which router is the one suppose to provide the clocking do a sh controllers s0 or s1 to check which is running DCE or DTE hope this helps Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Rajagopal Iyengar Sent: Tuesday, September 19, 2000 11:58 AM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: Clocking Question Hello Group, My Name is Rajgopal and I am based in Bombay,India.I have a question for you guys. I have read in the CCNA 2.0 Exam Certification guide by Wendell Odom that a DTE is the equipment that receives the Clocking information from a DCE which is the device that sends the clocking information for sync Links and at the same time he also says that a serial line comming from the ISP is connected to a CSU/DSU which in turn is connected to your serial port in the router and the CSU/DSU is the device which gives the clocking information for the sync links. Whereas the ICRC book says that by default the Cisco router is a DTE equipment and the minute we implement the clocking command on a particular serial interface then it becomes a DCE device. Correct me if I am wrong but for the clocking command to work on the enterprise side we have to enable the clocking command.Then does that interface become a DCE ??And if it becomes a DCE then doesn't it defy the rule that a DTE is connected to a DCE ?? The ICRC book also says that in case if you don't have a CSU/DSU u have to use a back to back cable to connect the 2 routers and the interface on which u implement the clocking command becomes a DCE interface.But don't u think that its the ISP which gives u the clocking information?? Please enlighten me on this subject as soon as possible because I have my CCNA exam on the 21st of Sept,2000 and I would like to be clear on as many concepts as possible. Many thanks and please help me out. Regards, Raj. P.s U can email me on the above mentioned address. _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: what does becn and fecn high value indicate?
thanks your explanation is crystal clear Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of [EMAIL PROTECTED] Sent: Tuesday, September 19, 2000 11:22 AM To: [EMAIL PROTECTED] Subject: RE: what does becn and fecn high value indicate? Basically, BECNs and FECNs indicate that the frame relay network is congested somewhere along your PVC. You're getting a lot of 'in BECN packets' but no 'in FECN packets', which means that the congestion is affecting traffic going from this end of the PVC to the other end. The congestion may or may not be caused by your traffic. If you have frame relay traffic shaping turned on, then if your router receives BECNs, it will throttle back the outgoing traffic on that PVC. When the BECNs go away again, it will gradually increase the traffic rate. Have a look at the router at the OTHER end of your PVC if you can (same command). You will probably see a lot of 'in FECN packets'. If you also have a lot of 'in DE packets', then you are at risk of getting a lot of packets dropped - Discard Eligible packets will be dropped in preference to non-DE packets. If you send a lot of traffic at a rate above your CIR, you might want to increase your CIR. It won't directly help the congestion, but it will mean less of your traffic is marked DE (so it's less likely to be dropped), and also many carriers provision their networks on the basis of purchased CIR - so it might prompt your carrier to upgrade. JMcL -- Forwarded by Jenny Mcleod/NSO/CSDA on 19/09/2000 02:13 pm --- "Yee, Jason" <[EMAIL PROTECTED]> on 19/09/2000 11:54:42 am Please respond to "Yee, Jason" <[EMAIL PROTECTED]> To: "'Jorge Rodriguez'" <[EMAIL PROTECTED]> "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> cc: [EMAIL PROTECTED] (bcc: JENNY MCLEOD/NSO/CSDA) Subject: RE: what does becn and fecn high value indicate? thanks for your explanation , it is very technical though Jason -----Original Message- From: Jorge Rodriguez [mailto:[EMAIL PROTECTED]] Sent: Monday, September 18, 2000 11:11 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Cc: [EMAIL PROTECTED] Subject: RE: what does becn and fecn high value indicate? If the router receives any BECNs during the current time interval, it decreases the transmit rate by 25%. The rate will continue to drop with each BECN (limit one drop per time interval) until the traffic rate gets to the minimum acceptable incoming or outgoing committed information rate (MINCIR), where it stops. Once the traffic rate has decreased, it takes 16 time intervals of receiving no BECNs to start to increase traffic again. Traffic increases (Be+Bc)/16, or more accurately, the byte limit that shows up in show traffic and show frame-relay pvc x divided by 16. Thus, it takes much longer to get back to committed information rate (CIR) than it did to drop to the MINCIR (similar to slow start in TCP/IP). One way of making this length of time much shorter would be to set "Be" 7 times the value of "Bc," which would ensure it gets back to CIR immediately after going through 16 time intervals without a BECN. Also of note is that this increase only occurs when traffic shaping is active. If traffic shaping is not active, the transmit increment stays the same even though BECNs are not being received. --Original Message-- From: "Yee, Jason" <[EMAIL PROTECTED]> To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> Sent: September 18, 2000 7:15:52 AM GMT Subject: what does becn and fecn high value indicate? hi , Anyone Knows what the BECN and FECN in sh frame-relay pvc indicates : and a high BECN indicates what? PVC Statistics for interface Hssi4/1 (Frame Relay DTE) DLCI = 299, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Hssi4/1.10 input pkts 1263236605output pkts 1388118986 in bytes 2167041222 out bytes 3760560232 dropped pkts 1 in FECN pkts 0 in BECN pkts 791683517 out FECN pkts 0 out BECN pkts 0 in DE pkts 29527 out DE pkts 0 out bcast pkts 16346 out bcast bytes 5868214 pvc create time 11w6d, last time pvc status changed 05:27:23 thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst R&S Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-989-8634 Evenings http://www.netwire.n3.net/ http://www.learncisco.n3.net/ ...
link down problem
hi fellow studymates, Need your comments on this particular problem It seems that one side pvc active the other pvc inactive and LMI down I have confirmed the following LMI type correct , could not ping on either side Can it be the side that the pvc is down is due to physical layer problem ? need your comments on this thanks Situation goes this way : configuration of router at one end : Router#sh run Building configuration... Current configuration: ! version 11.2 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname Router ! ! ! interface Ethernet0 no ip address shutdown ! interface Serial0 ip address 202.161.128.158 255.255.255.252 encapsulation frame-relay IETF no fair-queue frame-relay interface-dlci 659 frame-relay lmi-type ansi ! ip classless ip route 0.0.0.0 0.0.0.0 202.161.128.157 ! line con 0 line vty 0 4 login ! end Router#sh int s0 Serial0 is up, line protocol is down (looped) Internet address is 202.161.128.158/30 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely 211/255, load 1/255 Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10 sec) LMI enq sent 18, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 18, LMI stat sent 0, LMI upd sent 0 LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE Broadcast queue 0/64, broadcasts sent/dropped 0/0, interface broadcasts 0 Last input 00:00:09, output 00:00:00, output hang never Last clearing of "show interface" counters never Queueing strategy: fifo Output queue 0/40, 0 drops; input queue 0/75, 0 drops 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 693 packets input, 37348 bytes, 0 no buffer Received 72 broadcasts, 0 runts, 0 giants, 0 throttles 831 input errors, 1 CRC, 820 frame, 0 overrun, 0 ignored, 10 abort 962 packets output, 87013 bytes, 0 underruns 0 output errors, 0 collisions, 2890 interface resets 0 output buffer failures, 0 output buffers swapped out 12 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up --More-- Router#sh frame-relay pvc PVC Statistics for interface Serial0 (Frame Relay DTE) DLCI = 659, DLCI USAGE = LOCAL, PVC STATUS = INACTIVE, INTERFACE = Serial0 input pkts 0 output pkts 0 in bytes 0 out bytes 0 dropped pkts 0 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 0 out bcast bytes 0 pvc create time 02:03:22, last time pvc status changed 02:03:22 Router# configuration of router at the other end kap-cdr-02>sh frame-relay pvc 659 PVC Statistics for interface Hssi4/0 (Frame Relay DTE) DLCI = 659, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Hssi4/0.659 input pkts 598 output pkts 120463 in bytes 154900 out bytes 42196627 dropped pkts 3 in FECN pkts 0 in BECN pkts 0 out FECN pkts 0 out BECN pkts 0 in DE pkts 0 out DE pkts 0 out bcast pkts 8614 out bcast bytes 3101040 pvc create time 1w5d, last time pvc status changed 5d15h kap-cdr-02> Hssi4/0.659 (up): point-to-point dlci, dlci 659(0x293,0xA430), broadcast status defined, active **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: what does becn and fecn high value indicate?
thanks you guys for your valuable comments I have a good and clearer picture now thanks Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Frank Wells Sent: Tuesday, September 19, 2000 12:42 AM To: [EMAIL PROTECTED] Subject: Re: what does becn and fecn high value indicate? Of course you cannot control the FECN and BECN bits. What you can do though is adjust the manner in which your IP traffic negotiates moving from fast links to slower links (LAN to WAN etc). This is where the bandwidth command amongst others can be useful. For example, routing off a fast ethernet port across the router into one of its serial ports requires a slowing of traffic. Serial ports cannot handle anywhere near 100mb of traffic. There are a number of ways one can handle this; prioritizing, queueing and using the bandwidth parameter are a few that spring to mind. Each has its own merits and limitations so further investigation is warranted... >From: "Ejay Hire" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: what does becn and fecn high value indicate? >Date: Mon, 18 Sep 2000 11:12:20 CDT > >The fecn & becn bits are set by the frame-relay switch(es) whenever there >is congestion in the cloud. Nothing you can do on the router will make >them not be set, they are a flow control mechanism. > > >Original Message Follows >From: "Frank Wells" <[EMAIL PROTECTED]> >Reply-To: "Frank Wells" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: what does becn and fecn high value indicate? >Date: Mon, 18 Sep 2000 08:22:38 PDT > >Hey Atif, >If I recall correctly, doesn't setting the 'bandwidth'command on the WAN >link (frame relay in this case) resolve this problem? > > >>From: "Atif Awan" <[EMAIL PROTECTED]> >>Reply-To: "Atif Awan" <[EMAIL PROTECTED]> >>To: "Yee, Jason" <[EMAIL PROTECTED]>,"cisco@groupstudy. com >>\(E-mail\)" <[EMAIL PROTECTED]> >>Subject: Re: what does becn and fecn high value indicate? >>Date: Mon, 18 Sep 2000 14:48:27 +0500 >> >> >>BECN stands for Backward Explicit Congestion Notification. This indicates >>that there is congestion in the path opposite to the packets which have >>this >>BECN bit set. In your case you are getting a lot of packets with this BECN >>bit set and this is not a good sign. There is congestion outwards from >>your >>router. >> >>Regards >>Atif >> >>- Original Message - >>From: "Yee, Jason" <[EMAIL PROTECTED]> >>To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> >>Sent: Monday, September 18, 2000 12:15 PM >>Subject: what does becn and fecn high value indicate? >> >> >> > hi , Anyone >> > >> > Knows what the BECN and FECN in sh frame-relay pvc indicates : >> > >> > and a high BECN indicates what? >> > >> > >> > PVC Statistics for interface Hssi4/1 (Frame Relay DTE) >> > >> > DLCI = 299, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = >>Hssi4/1.10 >> > >> > input pkts 1263236605output pkts 1388118986 in bytes 2167041222 >> > out bytes 3760560232 dropped pkts 1 in FECN pkts 0 >> > in BECN pkts 791683517 out FECN pkts 0 out BECN pkts 0 >> > in DE pkts 29527 out DE pkts 0 >> > out bcast pkts 16346 out bcast bytes 5868214 >> > pvc create time 11w6d, last time pvc status changed 05:27:23 >> > >> > >> > thanks >> > >> > Jason >> > >> > >> > **NOTE: New CCNA/CCDA List has been formed. For more information go to >> > http://www.groupstudy.com/list/Associates.html >> > _ >> > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >> > FAQ, list archives, and subscription info: http://www.groupstudy.com >> > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] >> > >> >>**NOTE: New CCNA/CCDA List has been formed. For more information go to >>http://www.groupstudy.com/list/Associates.html >>_ >>UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >>FAQ, list archives, and subscription info: http://www.groupstudy.com >>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >_ >Get Your Private, Free E-mail from MSN Hotmail at http://www.
RE: what does becn and fecn high value indicate?
thank you , I will try that out thanks for your valuable comments -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Omar Baceski Sent: Monday, September 18, 2000 11:15 PM To: [EMAIL PROTECTED] Subject: RV: what does becn and fecn high value indicate? it means that a frame relay switch is sending you an advise to slow down the traffic load on this dlci... a frame relay switch sends a FECN to the destination dte and a BECN to the source dte when it encounters congestion somwhere un the switching path. you can use th interface command frame-relay traffic-shapping to let the source router trottle down the traffic when it receives a BECN... good luck :) > -Mensaje original- > De: Yee, Jason [SMTP:[EMAIL PROTECTED]] > Enviado el: Monday, September 18, 2000 4:16 AM > Para: cisco@groupstudy. com (E-mail) > Asunto: what does becn and fecn high value indicate? > > hi , Anyone > > Knows what the BECN and FECN in sh frame-relay pvc indicates : > > and a high BECN indicates what? > > > PVC Statistics for interface Hssi4/1 (Frame Relay DTE) > > DLCI = 299, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = > Hssi4/1.10 > > input pkts 1263236605output pkts 1388118986 in bytes 2167041222 > out bytes 3760560232 dropped pkts 1 in FECN pkts 0 > > in BECN pkts 791683517 out FECN pkts 0 out BECN pkts 0 > > in DE pkts 29527 out DE pkts 0 > out bcast pkts 16346 out bcast bytes 5868214 > pvc create time 11w6d, last time pvc status changed 05:27:23 > > > thanks > > Jason > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: what does becn and fecn high value indicate?
thanks for your explanation , it is very technical though Jason -Original Message- From: Jorge Rodriguez [mailto:[EMAIL PROTECTED]] Sent: Monday, September 18, 2000 11:11 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Cc: [EMAIL PROTECTED] Subject: RE: what does becn and fecn high value indicate? If the router receives any BECNs during the current time interval, it decreases the transmit rate by 25%. The rate will continue to drop with each BECN (limit one drop per time interval) until the traffic rate gets to the minimum acceptable incoming or outgoing committed information rate (MINCIR), where it stops. Once the traffic rate has decreased, it takes 16 time intervals of receiving no BECNs to start to increase traffic again. Traffic increases (Be+Bc)/16, or more accurately, the byte limit that shows up in show traffic and show frame-relay pvc x divided by 16. Thus, it takes much longer to get back to committed information rate (CIR) than it did to drop to the MINCIR (similar to slow start in TCP/IP). One way of making this length of time much shorter would be to set "Be" 7 times the value of "Bc," which would ensure it gets back to CIR immediately after going through 16 time intervals without a BECN. Also of note is that this increase only occurs when traffic shaping is active. If traffic shaping is not active, the transmit increment stays the same even though BECNs are not being received. --Original Message-- From: "Yee, Jason" <[EMAIL PROTECTED]> To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> Sent: September 18, 2000 7:15:52 AM GMT Subject: what does becn and fecn high value indicate? hi , Anyone Knows what the BECN and FECN in sh frame-relay pvc indicates : and a high BECN indicates what? PVC Statistics for interface Hssi4/1 (Frame Relay DTE) DLCI = 299, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Hssi4/1.10 input pkts 1263236605output pkts 1388118986 in bytes 2167041222 out bytes 3760560232 dropped pkts 1 in FECN pkts 0 in BECN pkts 791683517 out FECN pkts 0 out BECN pkts 0 in DE pkts 29527 out DE pkts 0 out bcast pkts 16346 out bcast bytes 5868214 pvc create time 11w6d, last time pvc status changed 05:27:23 thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Jorge Rodriguez /CCNA Network Analyst R&S Networks Inc 1112 Boylston Street Suite 222 Boston, MA 02115 1-781-614-1294 1-617-989-8634 Evenings http://www.netwire.n3.net/ http://www.learncisco.n3.net/ iWon.com http://www.iwon.com why wouldn't you? **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: what does becn and fecn high value indicate?
thanks a lot -Original Message- From: Atif Awan [mailto:[EMAIL PROTECTED]] Sent: Monday, September 18, 2000 5:48 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: what does becn and fecn high value indicate? BECN stands for Backward Explicit Congestion Notification. This indicates that there is congestion in the path opposite to the packets which have this BECN bit set. In your case you are getting a lot of packets with this BECN bit set and this is not a good sign. There is congestion outwards from your router. Regards Atif - Original Message - From: "Yee, Jason" <[EMAIL PROTECTED]> To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> Sent: Monday, September 18, 2000 12:15 PM Subject: what does becn and fecn high value indicate? > hi , Anyone > > Knows what the BECN and FECN in sh frame-relay pvc indicates : > > and a high BECN indicates what? > > > PVC Statistics for interface Hssi4/1 (Frame Relay DTE) > > DLCI = 299, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Hssi4/1.10 > > input pkts 1263236605output pkts 1388118986 in bytes 2167041222 > out bytes 3760560232 dropped pkts 1 in FECN pkts 0 > in BECN pkts 791683517 out FECN pkts 0 out BECN pkts 0 > in DE pkts 29527 out DE pkts 0 > out bcast pkts 16346 out bcast bytes 5868214 > pvc create time 11w6d, last time pvc status changed 05:27:23 > > > thanks > > Jason > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
what does becn and fecn high value indicate?
hi , Anyone Knows what the BECN and FECN in sh frame-relay pvc indicates : and a high BECN indicates what? PVC Statistics for interface Hssi4/1 (Frame Relay DTE) DLCI = 299, DLCI USAGE = LOCAL, PVC STATUS = ACTIVE, INTERFACE = Hssi4/1.10 input pkts 1263236605output pkts 1388118986 in bytes 2167041222 out bytes 3760560232 dropped pkts 1 in FECN pkts 0 in BECN pkts 791683517 out FECN pkts 0 out BECN pkts 0 in DE pkts 29527 out DE pkts 0 out bcast pkts 16346 out bcast bytes 5868214 pvc create time 11w6d, last time pvc status changed 05:27:23 thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: cool network testing tool
care to elaborate? -Original Message- From: Ledwidge, Feargal [mailto:[EMAIL PROTECTED]] Sent: Monday, September 18, 2000 10:26 AM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: RE: cool network testing tool Cool it may be ,,, .,... but never EVER EVER even THINK about using it in a production environment. Bad things can happen... Feargal -Original Message- From: Yee, Jason [mailto:[EMAIL PROTECTED]] Sent: Sunday, September 17, 2000 6:35 PM To: cisco@groupstudy. com (E-mail) Subject: cool network testing tool hi all, check the website below for a cool network testing tool : http://www.ccci.com/product/network_mon/tnm32/ttcp.htm http://www.ccci.com/product/network_mon/tnm31/ttcp.htm Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cool network testing tool
hi all, check the website below for a cool network testing tool : http://www.ccci.com/product/network_mon/tnm32/ttcp.htm http://www.ccci.com/product/network_mon/tnm31/ttcp.htm Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line down
thanks for all your support cheers!!! Jason -Original Message- From: William E Gragido [mailto:[EMAIL PROTECTED]] Sent: Friday, September 15, 2000 10:41 AM To: Yee, Jason; 'Plantier, William'; Felice Russell Cc: Cisco Groupstudy Subject: RE: line down Thats great to hear Jason! I am glad that the your hard work paid off! > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Yee, Jason > Sent: Thursday, September 14, 2000 8:01 PM > To: 'Plantier, William'; Felice Russell > Cc: Cisco Groupstudy > Subject: RE: line down > > > thanks for all your kindness and help , I have finally isolated is a modem > problem > > Jason > > -Original Message- > From: Plantier, William [mailto:[EMAIL PROTECTED]] > Sent: Thursday, September 14, 2000 10:06 PM > To: Felice Russell; Yee, Jason > Cc: Cisco Groupstudy > Subject: RE: line down > > > > You might want to check your clocking also. > > > -Original Message- > > From: Felice Russell [SMTP:[EMAIL PROTECTED]] > > Sent: Thursday, September 14, 2000 8:51 AM > > To: [EMAIL PROTECTED] > > Cc: Cisco Groupstudy > > Subject:line down > > > > Jason - > > Have you checked the status of DTR (etc) under the show > interface seril # > > command? If you are in fact getting signel- you want to check to see if > > the > > lmi are communicating. Basically this should happen if the switch and > > router > > are communicating. If they are not - verify you are using the > correct lmi > > setting onthe interface withthe carrier. If that checks out - a > reload is > > a > > good idea. If fundamental changes (to say a dlci) are made many > times the > > interface does not responce properly unless it is either shut down and > > restarted or the router reloaded... > > Good Luck, > > Felice > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line down
thanks for all your kindness and help , I have finally isolated is a modem problem Jason -Original Message- From: Plantier, William [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 14, 2000 10:06 PM To: Felice Russell; Yee, Jason Cc: Cisco Groupstudy Subject: RE: line down You might want to check your clocking also. > -Original Message- > From: Felice Russell [SMTP:[EMAIL PROTECTED]] > Sent: Thursday, September 14, 2000 8:51 AM > To: [EMAIL PROTECTED] > Cc: Cisco Groupstudy > Subject: line down > > Jason - > Have you checked the status of DTR (etc) under the show interface seril # > command? If you are in fact getting signel- you want to check to see if > the > lmi are communicating. Basically this should happen if the switch and > router > are communicating. If they are not - verify you are using the correct lmi > setting onthe interface withthe carrier. If that checks out - a reload is > a > good idea. If fundamental changes (to say a dlci) are made many times the > interface does not responce properly unless it is either shut down and > restarted or the router reloaded... > Good Luck, > Felice > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line protocol down(???)
thanks for your reply , ok I will check the DLCI command . Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 14, 2000 11:36 AM To: Yee, Jason; [EMAIL PROTECTED] Subject: Re: line protocol down(???) Jay, Are you sure it's not his configuration??? Your config looks ok...??? I know this was probably asked but is your line going out to a telco provider? If so it looks like this could be a routing issue. If he can get to you but you cant get to him then it looks like there's something wrong with his side, or blocking you somehow. Did this just all of a sudden happen out of nowhere or is this something that you just set up??? His DLCI mapping commands may be a little screwy...just a though, well...a couple ;) Mark Zabludovsky ~ CCNA, CCDA, 1/4-NP [EMAIL PROTECTED] "Destiny is not a matter of chance, it is a matter of choice; it is not a thing to be waited for, it is a thing to be achieved." ~William Jennings Bryan~ **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: line protocol down
hi all , With regard to my problem.I was troubleshooting this morning and the problem is still with their receive. I first disabled LMI and had him do the same on his router along with no keepalives. The PVC came back up from the perspective of the frame relay switch (with LMI enabled it was down). I send 100 packets to him, he doesn't receive them on the router PVC stats. I show the packets traversing our frame relay network with zero discards or errors. He sends me 100 packets, I show 100 packets coming into our network. any comments Jason -Original Message- From: Erick B. [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 2:47 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: line protocol down Hi, First of all, your serial interface has input errors and CRC errors. You have sent LMI but haven't received any LMI probably due to these input errors and CRC's. I would check the circuit and CSU config. Once you get the line issues sorted out, heres how to troubleshoot frame based on the output you gave. Your DLCI 659 is DELETED which is assigned to your sub interface. Note, it was active when the interface was first brought up for a short time. This is normal on Cisco routers. The DLCIs are marked as active when interface is first brought up until LMI is received or not. Do a 'show frame pvc' and see what DLCIs your learning from the provider's frame switch if you are. Your LMI type is ANSI, is this correct? You can do a 'debug frame lmi' to see LMI packets. LMI is the management protocol where your DLCIs are learned, status of them, etc. It has to match that of switch. In the debug output, you will get at least 2-3 lines for each LMI poll (plus one more for each PVC, DLCI). The PVC/DLCI lines in 'debug frame lmi' begin with PVC ... and in middle will have dlci ##. If you don't see PVC lines in debug output your not learning any DLCIs and theres a issue w/the configuration of the providers switch/frame mapping to you, LMI mis-match, or a line problem. You can switch the LMI-type see if anything changes as well (while your waiting for provider to callback). If debug frame lmi looks good, then do a 'show frame map' to see what inverse-arp is picking for remote address's since your not staticly mapping them with a frame map statement. What does 'show frame lmi' show for input/output (bottom 2 lines of output). HTH, Erick B. --- "Yee, Jason" <[EMAIL PROTECTED]> wrote: > > hi , > > I have problems with my frame-relay serial link > attatched is the router > configuration > > physical layer confirmed is ok as carrier is up but > my serial interface > still showing interface up line protocol down > > Any inputs will be greatly appreciated > > > thanks > > Jason > > > cncnepal.384.128.k2pop#sh run > Building configuration... > > Current configuration: > ! > version 11.2 > no service password-encryption > no service udp-small-servers > no service tcp-small-servers > ! > hostname cncnepal.384.128.k2pop > ! > ! > ip subnet-zero > ! > interface Ethernet0 > no ip address > ! > interface Serial0 > ip address 192.168.1.9 255.255.255.252 > no fair-queue > ! > interface Serial1 > no ip address > encapsulation frame-relay IETF > --More-- > frame-relay lmi-type ansi > ! > interface Serial1.1 point-to-point > ip address 202.161.128.158 255.255.255.252 > frame-relay interface-dlci 659 > ! > router bgp 64519 > network 202.51.65.0 > network 202.51.66.0 > ! > ip classless > ip route 0.0.0.0 0.0.0.0 202.161.128.157 > ! > line con 0 > line 1 16 > line aux 0 > line vty 0 4 > password router > login > ! > end > > cncnepal.384.128.k2pop#sh int s1 > Serial1 is up, line protocol is down > Hardware is HD64570 > MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely > 168/255, load 1/255 > Encapsulation FRAME-RELAY IETF, loopback not set, > keepalive set (10 sec) > LMI enq sent 60, LMI stat recvd 0, LMI upd recvd > 0, DTE LMI down > LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 > LMI DLCI 0 LMI type is ANSI Annex D frame relay > DTE > Broadcast queue 0/64, broadcasts sent/dropped 1/0, > interface broadcasts 0 > Last input never, output 00:00:00, output hang > never > Last clearing of "show interface" counters never > Input queue: 0/75/0 (size/max/drops); Total output > drops: 0 > Queueing strategy: weighted fair > Output queue: 0/1000/64/0 (size/max > total/threshold/drops) > Conversations 0/1/256 (active/max active/max > total) > Reserved Conversations 0/0 (allocated/max > allocated) > 5 minute input rate 0 bits/sec, 0 packets
RE: cisco switches
hi brian Thanks for the explanation to the group and I hope you guys understand. Anyway thanks for all your help in one way or another Jason -Original Message- From: Brian [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 14, 2000 10:24 AM To: Bellanca Smythe Cc: [EMAIL PROTECTED]; Yee, Jason; [EMAIL PROTECTED] Subject: RE: cisco switches thats not really the vibe I get. He is studying for CCNP and half way there. I feel he is probably a little impatient, and asks here instead of referencing, no matter how simple the question..that seems to piss some off. I feel his employer has tasked him with "make this work" as an excecise, probably not production equipment, and then he comes here when he has trouble. He is lucky to have a job to play with this stuff that alot of you don't have..hell that in itself should be inspiration. I don't dislike paper network engineers so long as they don't front. If you study hard, pass some tests, and no doubt learn a hell of alot...then you have done goodputting that to acutal use will be challenging but you have completed step one at least. Brian On Wed, 13 Sep 2000, Bellanca Smythe wrote: > I'm surprised Jason is getting so many people on this list helping him > troubleshoot his day to day job. Jason appears to be what the group > dislikes most - a paper network engineer. > > He's using the group to do all his consulting for him, for free. If > you're into supporting that, by all means, keep helping him. > > > -Original Message- > > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > > [EMAIL PROTECTED] > > Sent: Tuesday, September 12, 2000 9:34 PM > > To: [EMAIL PROTECTED]; [EMAIL PROTECTED] > > Subject: Re: cisco switches > > > > > > In a message dated 9/12/00 10:49:08 PM Eastern Daylight Time, > > [EMAIL PROTECTED] writes: > > > > > > << hi all, > > > > Do all cisco switches run IOS , I know 1900 do , but what about > > the others? > > > > > > > > Jason > > >> > > > > Hey, you've asked a lot of beginner level questions in the past > > couple months > > that could be answered extremely simply by a simple phrase"RTFM" ;) > > > > To answer this one though since I just took the test...the 1900/2820 and > > 2900XL series switches use the IOS. I believe the Set based > > commands start at > > the 4000 series switches. Set based may actually start at 5000 > > and up...I may > > be wrong on that...This could all be done by (once again) "RTFM" ;) > > > > Hope I helped... > > > > Mark Zabludovsky ~ CCNA, CCDA, 1/4-NP > > [EMAIL PROTECTED] > > > > "Destiny is not a matter of chance, it is a matter of choice; > > it is not a > > thing to be waited for, it is a thing to be achieved." > > > > > > ~William Jennings Bryan~ > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > > http://www.groupstudy.com/list/Associates.html > > _ > > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > > FAQ, list archives, and subscription info: http://www.groupstudy.com > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > --- Brian Feeny, CCNA, CCDA [EMAIL PROTECTED] Network Administrator ShreveNet Inc. (ASN 11881) **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Routing Registry
thank you -Original Message- From: Carlos Patriawan [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 2:25 PM To: Yee, Jason; 'John Kaberna'; cisco@groupstudy. com (E-mail) Subject: Re: Routing Registry open www.nanog.org or www.ra.net and search stuffs like "RPSL" .. carlos -Original Message----- From: Yee, Jason <[EMAIL PROTECTED]> To: 'John Kaberna' <[EMAIL PROTECTED]>; cisco@groupstudy. com (E-mail) <[EMAIL PROTECTED]> Date: Wednesday, September 13, 2000 2:14 PM Subject: RE: Routing Registry >bgp stuff > >Jason > >-Original Message- >From: John Kaberna [mailto:[EMAIL PROTECTED]] >Sent: Wednesday, September 13, 2000 11:58 AM >To: Yee, Jason; cisco@groupstudy. com (E-mail) >Subject: Re: Routing Registry > > >I've never heard of a routing registry. What exactly are you referring to? > >John > >- Original Message - >From: Yee, Jason <[EMAIL PROTECTED]> >To: cisco@groupstudy. com (E-mail) <[EMAIL PROTECTED]> >Sent: Tuesday, September 12, 2000 8:40 PM >Subject: Routing Registry > > >> hi all >> >> Anyone knows how to setup or have any experiences in setting up a routing >> registry? I am told to setup one but no idea how to do it . Sorry if it is >> simple but I really do not know >> >> thanks >> >> Jason >> >> **NOTE: New CCNA/CCDA List has been formed. For more information go to >> http://www.groupstudy.com/list/Associates.html >> _ >> UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >> FAQ, list archives, and subscription info: http://www.groupstudy.com >> Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
line protocol down
hi , I have problems with my frame-relay serial link attatched is the router configuration physical layer confirmed is ok as carrier is up but my serial interface still showing interface up line protocol down Any inputs will be greatly appreciated thanks Jason cncnepal.384.128.k2pop#sh run Building configuration... Current configuration: ! version 11.2 no service password-encryption no service udp-small-servers no service tcp-small-servers ! hostname cncnepal.384.128.k2pop ! ! ip subnet-zero ! interface Ethernet0 no ip address ! interface Serial0 ip address 192.168.1.9 255.255.255.252 no fair-queue ! interface Serial1 no ip address encapsulation frame-relay IETF --More-- frame-relay lmi-type ansi ! interface Serial1.1 point-to-point ip address 202.161.128.158 255.255.255.252 frame-relay interface-dlci 659 ! router bgp 64519 network 202.51.65.0 network 202.51.66.0 ! ip classless ip route 0.0.0.0 0.0.0.0 202.161.128.157 ! line con 0 line 1 16 line aux 0 line vty 0 4 password router login ! end cncnepal.384.128.k2pop#sh int s1 Serial1 is up, line protocol is down Hardware is HD64570 MTU 1500 bytes, BW 1544 Kbit, DLY 2 usec, rely 168/255, load 1/255 Encapsulation FRAME-RELAY IETF, loopback not set, keepalive set (10 sec) LMI enq sent 60, LMI stat recvd 0, LMI upd recvd 0, DTE LMI down LMI enq recvd 0, LMI stat sent 0, LMI upd sent 0 LMI DLCI 0 LMI type is ANSI Annex D frame relay DTE Broadcast queue 0/64, broadcasts sent/dropped 1/0, interface broadcasts 0 Last input never, output 00:00:00, output hang never Last clearing of "show interface" counters never Input queue: 0/75/0 (size/max/drops); Total output drops: 0 Queueing strategy: weighted fair Output queue: 0/1000/64/0 (size/max total/threshold/drops) Conversations 0/1/256 (active/max active/max total) Reserved Conversations 0/0 (allocated/max allocated) 5 minute input rate 0 bits/sec, 0 packets/sec 5 minute output rate 0 bits/sec, 0 packets/sec 0 packets input, 0 bytes, 0 no buffer Received 0 broadcasts, 0 runts, 0 giants, 0 throttles 12363 input errors, 38 CRC, 0 frame, 36 overrun, 739 ignored, 38 abort 62 packets output, 1162 bytes, 0 underruns 0 output errors, 0 collisions, 21 interface resets 0 output buffer failures, 0 output buffers swapped out --More-- 0 carrier transitions DCD=up DSR=up DTR=up RTS=up CTS=up cncnepal.384.128.k2pop#sh log Syslog logging: enabled (0 messages dropped, 0 flushes, 0 overruns) Console logging: level debugging, 13 messages logged Monitor logging: level debugging, 0 messages logged Trap logging: level informational, 17 message lines logged Buffer logging: level debugging, 13 messages logged --More-- Log Buffer (4096 bytes): %LINK-3-UPDOWN: Interface Ethernet0, changed state to up %LINK-3-UPDOWN: Interface Serial0, changed state to down %LINK-3-UPDOWN: Interface Serial1, changed state to up %LINEPROTO-5-UPDOWN: Line protocol on Interface Ethernet0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial0, changed state to down %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to up %FR-5-DLCICHANGE: Interface Serial1 - DLCI 659 state changed to ACTIVE %SYS-5-CONFIG_I: Configured from memory by console %SYS-5-RESTART: System restarted -- Cisco Internetwork Operating System Software IOS (tm) 2500 Software (C2500-I-L), Version 11.2(18), RELEASE SOFTWARE (fc1) Copyright (c) 1986-1999 by cisco Systems, Inc. Compiled Mon 05-Apr-99 19:52 by jaturner %FR-5-DLCICHANGE: Interface Serial1 - DLCI 659 state changed to INACTIVE %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1.1, changed state to down %FR-5-DLCICHANGE: Interface Serial1 - DLCI 659 state changed to DELETED %LINEPROTO-5-UPDOWN: Line protocol on Interface Serial1, changed state to down cncnepal.384.128.k2pop#
RE: Routing Registry
bgp stuff Jason -Original Message- From: John Kaberna [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 11:58 AM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: Routing Registry I've never heard of a routing registry. What exactly are you referring to? John - Original Message - From: Yee, Jason <[EMAIL PROTECTED]> To: cisco@groupstudy. com (E-mail) <[EMAIL PROTECTED]> Sent: Tuesday, September 12, 2000 8:40 PM Subject: Routing Registry > hi all > > Anyone knows how to setup or have any experiences in setting up a routing > registry? I am told to setup one but no idea how to do it . Sorry if it is > simple but I really do not know > > thanks > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Routing Registry
hi all Anyone knows how to setup or have any experiences in setting up a routing registry? I am told to setup one but no idea how to do it . Sorry if it is simple but I really do not know thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cisco switches
hi all, Do all cisco switches run IOS , I know 1900 do , but what about the others? Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Router models?
thanks -Original Message- From: Matt Wehland [mailto:[EMAIL PROTECTED]] Sent: Wednesday, September 13, 2000 2:15 AM To: Yee, Jason; [EMAIL PROTECTED] Subject: RE: Router models? At 08:22 PM 9/11/00 -0500, Yee, Jason wrote: >thank you for the reply I will, any books or references I can use to >memorise all these info On book I like (although I really haven't read all of it) is Cisco Router Handbook George C Sackett McGraw-Hill ISBN 0-07-058098-7 I bought this as a reference manual more than a study aid for my CCNA. The first part of the book goes over the Cisco product line with pictures and diagrams so you get info on what the different models are and get so see what they look like. The next part is basic router stuff, configuring, loading IOS etc. The last part goes over configuring routing protocols, RIP, OSPF, IEGRP, BGP. Matt Wehland **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Command Question
clock Rate and bandwidth is totally different entities, for live and production environment clock rate is provided by the modem so you do not need to have to key in the clock rate Jason -Original Message-From: Cisco Kid [mailto:[EMAIL PROTECTED]]Sent: Monday, September 11, 2000 7:33 AMTo: Yee, Jason; 'Adam Hickey'; [EMAIL PROTECTED]Subject: Re: Command Question If I set a clock rate of 56000 does that mean that I can not run the interface at say t1 bandwidth? - Original Message - From: Yee, Jason To: 'Adam Hickey' ; '[EMAIL PROTECTED]' Sent: Sunday, September 03, 2000 9:08 PM Subject: RE: Command Question clock rate is normally omitted if your router's DTE interface is connected to a CSU/DSU since the modem will provide the clock rate information. However if you are in a lab scenario whereby you are simulating a Wan by connecting your DTE to your DCE using two Cisco cables then at the DCE end you have to provide the clock rate in order that your serial interface can be up and running. However , bandwidth needs to be supplied no matter you are in lab or practical environments because things like reliability , load etc depends on it to work. Hope that helps Jason -Original Message-From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Adam HickeySent: Saturday, September 02, 2000 6:56 AMTo: [EMAIL PROTECTED]Subject: Command Question What is the diference between the "clock rate" command and the "bandwidth" command? Thanks Adam Hickey [EMAIL PROTECTED]
RE: ccnp 2.0
thanks -Original Message- From: Donald B Johnson Jr [mailto:[EMAIL PROTECTED]] Sent: Tuesday, September 12, 2000 4:40 AM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: ccnp 2.0 You will be a CCNP 1 unless you update your switching exam. You don't need to update your CCAN. Duc - Original Message - From: Yee, Jason <[EMAIL PROTECTED]> To: cisco@groupstudy. com (E-mail) <[EMAIL PROTECTED]> Sent: Monday, September 04, 2000 11:31 PM Subject: ccnp 2.0 > hi guys and gals, > > Anyone knows what track will I be ie 2.0 or 1.0 if I took all the 2.0 exams > except my ccna is 1.0 and my clsc is 1.0 > > > what track will I be in 2.0 or 1.0 or I have to retake my ccna again and > clsc again to gain 2.0 certification > > thanks > > > Jason > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: what is dark fiber?
thank you -Original Message- From: CiscoDiety [mailto:[EMAIL PROTECTED]] Sent: Monday, September 11, 2000 11:12 PM To: Yee, Jason; 'bahadir korkmaz'; [EMAIL PROTECTED] Subject: Re: what is dark fiber? Dark fiber is fiber that is not being used. ie, no light is passed through it, hence the term "dark" Clayton Dukes Internetwork Solutions Engineer Internetwork Management Engineer Thrupoint, Inc. CCNA, CCDA, CCDP, CCNP SunCSA, Etc. - Original Message ----- From: "Yee, Jason" <[EMAIL PROTECTED]> To: "'bahadir korkmaz'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Tuesday, September 05, 2000 10:27 PM Subject: RE: what is dark fiber? > I think dark fibre means a OC3 or OC12 link > > Jason > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > bahadir korkmaz > Sent: Wednesday, September 06, 2000 12:04 AM > To: [EMAIL PROTECTED] > Subject: what is dark fiber? > > > hi. > what is dark fiber? > i found some sites that says dark fiber means unused fiber. > is it so? > i think dark fiber must be different then unused fiber. > i mean for example. 10gigabit ethernet runs on dark fiber. > dark must be something related to bandwidth or wavelength. > > if someone knows dark fiber definition i ll be happy. > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > Share information about yourself, create your own public profile at > http://profiles.msn.com. > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > **NOTE: New CCNA/CCDA List has been formed. For more information go to > http://www.groupstudy.com/list/Associates.html > _ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Router models?
thank you for the reply I will, any books or references I can use to memorise all these info Jason -Original Message- From: Stephen Skinner [mailto:[EMAIL PROTECTED]] Sent: Monday, September 11, 2000 11:58 PM To: Yee, Jason; [EMAIL PROTECTED] Subject: Re: Router models? not really they don`t ask to many question`s on the 7000 but you better give it a quick look incase.. >From: "Yee, Jason" <[EMAIL PROTECTED]> >Reply-To: "Yee, Jason" <[EMAIL PROTECTED]> >To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> >Subject: Router models? >Date: Mon, 4 Sep 2000 22:51:48 -0500 > >hi guys and gals > >For the Remote Access 2.0 exam , does one need to memorise the different >types of routers ranging from 700, 1600 , 3600 series how many serial ports >they have , how many BRI interfaces they have etc.? > >thanks b4 hand >Jason > >**NOTE: New CCNA/CCDA List has been formed. For more information go to >http://www.groupstudy.com/list/Associates.html >_ >UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html >FAQ, list archives, and subscription info: http://www.groupstudy.com >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associates.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: bgp problems
I have checked but the neighbor 202.161.130.249 is actually a host of a loopback interface having mask of 255.255.255.255 and I can't add in this mask in a static route , what should I do ? please mail me a [EMAIL PROTECTED] thanks Jason -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Aaron K. Dixon Sent: Friday, September 08, 2000 2:20 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: RE: bgp problems You are using eBGP multihop so it's important to find out if you have a route to your provider and also if your provider has a route to you. You have a default route which points to your provider, but I would add a host based static route to your bgp neighbor. With BGP, you can have problems when you use a default route to get to your BGP connection; then when BGP comes up you learn a more specific route via BGP and all the other networks become unreachable due to a bad next hop. You also need to ensure that your provider has a route back to your serial interface. Regards, Aaron K. Dixon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Yee, Jason Sent: Friday, September 08, 2000 12:32 AM To: cisco@groupstudy. com (E-mail) Subject: bgp problems hi Anyone can help me with the problems below : Hi, The configuration file is attached. For two days the link was down because the some problem in local line. Now it was set right. After that the bgp link came up and worked fine for 90 mins. After there is no data transfer in this link. By the same time I am able to ping 202.65.129.81 ( ip for my IRD), so I given a complaint to customercare, USA. And also I restarted IRD here. The link came up after 30 mins. Now again the link was up, but there is no active bgp connection. when I see bgp neighbors, it is showing No active TCP connections <<2501.log>> Any form of input will be greatly appreciated thanks Jason **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associate-Announcement.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associate-Announcement.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
bgp problems
hi Anyone can help me with the problems below : Hi, The configuration file is attached. For two days the link was down because the some problem in local line. Now it was set right. After that the bgp link came up and worked fine for 90 mins. After there is no data transfer in this link. By the same time I am able to ping 202.65.129.81 ( ip for my IRD), so I given a complaint to customercare, USA. And also I restarted IRD here. The link came up after 30 mins. Now again the link was up, but there is no active bgp connection. when I see bgp neighbors, it is showing No active TCP connections <<2501.log>> Any form of input will be greatly appreciated thanks Jason 2501.log
RE: high speed internet access over satellite dish?
thank you -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ejay Hire Sent: Thursday, September 07, 2000 10:43 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: RE: high speed internet access over satellite dish? The company I work for has Frame-Relay over Sattelite to Europe. The Ping times are ~ 950 ms+ It costs ~$20,000 a month. If you are talking about the home internet service that works over sattelite, and uses one of the 19" dishes that are popular for Digital Television, then you should know they are one way links. You have to request the data over a Dial-up/lease-line, and it comes dwon from the sattelit to you. From the one person I know that has it, It seems to be too much trouble, the latency is too high, and the Bandwith is aroun 192Kbps. Original Message Follows From: ElephantChild <[EMAIL PROTECTED]> Reply-To: ElephantChild <[EMAIL PROTECTED]> To: "Yee, Jason" <[EMAIL PROTECTED]> CC: "'joel.studtmann'" <[EMAIL PROTECTED]>, "'cisco@groupstudy. com (E-mail)'" <[EMAIL PROTECTED]> Subject: RE: high speed internet access over satellite dish? Date: Thu, 7 Sep 2000 12:00:44 +0200 (CEST) On Thu, 7 Sep 2000, Yee, Jason wrote: > yup I do any ideas ? It's probably not worth it unless a significant part of your traffic is with hosts located just behind the remote satellite hop or with a high-bandwidth path to the satellite hop. And if you do, you probably want to make sure that both your hosts and the hosts you access support RFC1323 (for long TCP connections, eg transfer of large files) and RFC1644 (for bursts of short sessions, such as loading a web page and images it references). > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > joel.studtmann > > That depends: Are you looking at available bandwidth limitations, cost > estimates, or names of carriers that support them? Are you providing your > own satellite system? > > - Original Message - > From: "Yee, Jason" <[EMAIL PROTECTED]> > > > hi , > > > > Anyone got any knowledge on establishing high speed internet access over > > satellite dish? -- Bungee jumping and skydiving are for wimps. If you want to experience true gut-wrenching terror, have children. --Dusty Rhoades. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associate-Announcement.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: problems with modem commands
thank you I finally got you Jason -Original Message- From: Ejay Hire [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 07, 2000 10:37 PM To: Yee, Jason Cc: [EMAIL PROTECTED] Subject: RE: problems with modem commands &D3 causes the modem to hang up the call, but will not cause the router to reset the session. If you want to dial in again, you have to connect to the router and type clear line X where x is the async port the modem is connected to. Original Message Follows From: "Yee, Jason" <[EMAIL PROTECTED]> Reply-To: "Yee, Jason" <[EMAIL PROTECTED]> To: "'Kane'" <[EMAIL PROTECTED]>,"cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> Subject: RE: problems with modem commands Date: Thu, 7 Sep 2000 04:34:04 -0500 thank you , but your explanation can it be a bit more simpler ? Assume I am a layman Jason -Original Message- From: Kane [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 07, 2000 5:19 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: problems with modem commands Because a DTR drop will result in the modem resetting to the same state as if an ATZ(n) command had been received . Depending on the &Q(n) settings , this could potentially result in disabling dial-in to the modem , and an invalid modemcap entry. Rgrds - Original Message - From: "Yee, Jason" <[EMAIL PROTECTED]> To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> Sent: Thursday, September 07, 2000 5:10 PM Subject: problems with modem commands > > hi all, > > I read the BCRAN course materials and there is one line under > troubleshooting modem autoconfiguration that I do not quite understand that > I need all of your help : > > It goes this way : > > If you configured your own modemcap entry and reconfiguraton appears to > function , verify that DTR attribute is not set to &D3 , why is that so?? > > > Jason > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. Share information about yourself, create your own public profile at http://profiles.msn.com. **NOTE: New CCNA/CCDA List has been formed. For more information go to http://www.groupstudy.com/list/Associate-Announcement.html _ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: async mode interactive?
thank you very much -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 07, 2000 5:26 PM To: Yee, Jason Cc: [EMAIL PROTECTED] Subject: Re: async mode interactive? Interactive allows user to specify which service they wish to use, eg; ppp, slip exec etc, whereas dedicated doesn't give a choice/option. Interactive is also required if you are using dynamic addressing (user specifies own address), Regards, Keith ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: problems with modem commands
thank you , but your explanation can it be a bit more simpler ? Assume I am a layman Jason -Original Message- From: Kane [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 07, 2000 5:19 PM To: Yee, Jason; cisco@groupstudy. com (E-mail) Subject: Re: problems with modem commands Because a DTR drop will result in the modem resetting to the same state as if an ATZ(n) command had been received . Depending on the &Q(n) settings , this could potentially result in disabling dial-in to the modem , and an invalid modemcap entry. Rgrds - Original Message - From: "Yee, Jason" <[EMAIL PROTECTED]> To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> Sent: Thursday, September 07, 2000 5:10 PM Subject: problems with modem commands > > hi all, > > I read the BCRAN course materials and there is one line under > troubleshooting modem autoconfiguration that I do not quite understand that > I need all of your help : > > It goes this way : > > If you configured your own modemcap entry and reconfiguraton appears to > function , verify that DTR attribute is not set to &D3 , why is that so?? > > > Jason > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
packet replay?
hi all, Anyone knows how one can replay a packet after capturing ? As noted in ppp pap authentication Jason ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
async mode interactive?
hi all, Anyone knows how async mode interactive is different from async mode dedicated? Jason ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: low internet access as well as corporate tunnelling access?
thank you -Original Message- From: ElephantChild [mailto:[EMAIL PROTECTED]] Sent: Thursday, September 07, 2000 4:11 PM To: Yee, Jason Cc: cisco@groupstudy. com (E-mail) Subject: Re: low internet access as well as corporate tunnelling access? On Thu, 7 Sep 2000, Yee, Jason wrote: > I need some proof to show the management that the bottleneck in our network > lies in our FireWall. Also I want to investigate why the intranet access is > slow over our tunnelling path over our isp to our corporate network. Use MRTG, or your favorite SNMP network management application or library, to monitor the interface throughput, error rate, and CPU load at suitable locations on your network. Oh, and IMHO, unless you already have good reason to think that the problem lies with a specific component of your firewall, it will help you if you approach the problem from the "can I find out where the bottleneck is" angle rather than focus a priori on a spot and try to assign blame to it. -- Bungee jumping and skydiving are for wimps. If you want to experience true gut-wrenching terror, have children. --Dusty Rhoades. ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: high speed internet access over satellite dish?
yup I do any ideas ? -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of joel.studtmann Sent: Wednesday, September 06, 2000 7:01 AM To: cisco@groupstudy. com (E-mail) Subject: Re: high speed internet access over satellite dish? That depends: Are you looking at available bandwidth limitations, cost estimates, or names of carriers that support them? Are you providing your own satellite system? - Original Message - From: "Yee, Jason" <[EMAIL PROTECTED]> To: "cisco@groupstudy. com (E-mail)" <[EMAIL PROTECTED]> Sent: Tuesday, September 05, 2000 4:36 AM Subject: high speed internet access over satellite dish? > hi , > > Anyone got any knowledge on establishing high speed internet access over > satellite dish? > > thanks b4 hand > > Jason > > ___ > UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html > FAQ, list archives, and subscription info: http://www.groupstudy.com > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
low internet access as well as corporate tunnelling access?
hi all, I need some proof to show the management that the bottleneck in our network lies in our FireWall. Also I want to investigate why the intranet access is slow over our tunnelling path over our isp to our corporate network. Any inputs ? thanks Jason ___ UPDATED Posting Guidelines: http://www.groupstudy.com/list/guide.html FAQ, list archives, and subscription info: http://www.groupstudy.com Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]