I'm setting up CUBE in my home lab. For some reason my dial-peers are not
being matched by any number. For example I have defined a dial-p for my CME
router for 1000 extensions with the destination pattern of 1... If I do a
show dialplan number 1001 it gives me no match and also no match when I
Thanks Marcelo et al...
On 1/26/2011 12:19 PM, Marcelo Alexandria wrote:
Hi Shrini..it´s a good question... in my 3 attempt´s I was used
the .254 address.No problem with this , I got 100% in this section.
*De:*ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudy
If you set "mls qos trust cos" then CoS markings will be preserved; however,
any DSCP marking will be written to 0.
The same holds true for "mls qos trust dscp." Any packet entering the switch
with a CoS marking will be written to 0.
That is why you have cos-to-dscp and dscp-to-cos mappings.
Hello,
I believe the issue you are seeing is based on two issues. One is
that 10.x.x.x is a class A network. The normal netmask for this is
255.0.0.0 and that means anything in the 10.x.x.x network is active
except 10.0.0.0 and 10.255.255.255. So in that or any situation where
the netmask is not
To answer your second question - the Enterprise QoS SRND is here:
http://www.cisco.com/en/US/partner/docs/solutions/Enterprise/WAN_and_MAN/QoS_SRND/QoS-SRND-Book.html
AFAIK it’s not accessible via the support URL available to you in the lab
(http://www.cisco.com/cisco/web/psa/default.html) –
OK, thanks to all!!
cheers
Matteo
From: bart...@hotmail.com
To: ccie_voice@onlinestudylist.com
Date: Wed, 26 Jan 2011 17:22:23 +
Subject: [OSL | CCIE_Voice] VUE ID for the LAB.
Hello People...
next Friday i'm going to sit for the lab...( cross your finger!! )
On the confirmation
Now I'm not sure any longer ;)
when you have on a switch port:
mls qos trust device cisco-phone
mls qos trust cos
the COS sent by phone is trusted, PC COS markings are trusted or not
depending on "switchport priority extend" command.
But I have no idea how it behaves when DSCP markings are condit
But giving it a second thought... If you have "mls qos trust device
cisco-phone" on the same port there is a chance it could work as you expect.
But I'd believe it, if I saw this in cisco docs :)
On Wed, Jan 26, 2011 at 21:31, Miron Kobelski wrote:
> With your configuration you would trust ANY
With your configuration you would trust ANY dscp marking received from the
IP phone port. No matter if it was sent by cisco ip phone or a rogue PC
behind it.
You loose the benefit of conditional trust boundary... I suspect that these
tasks are contradictory.
regards
kobel
On Wed, Jan 26, 2011 at
Hi Shrini..it´s a good question... in my 3 attempt´s I was used the .254
address.No problem with this , I got 100% in this section.
De: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] Em nome de Shrini
Enviada em: quarta-feira, 26 de janeiro de 2011 15
Bring with you your personal ID(passaport or another) , and a print of your
CCIE LAB confirmation e-mail. It´s enough!!
De: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] Em nome de Matteo B.
Enviada em: quarta-feira, 26 de janeiro de 2011 15:22
Para:
I agree that QoS SRND should be available on desktop, but it bothers me that
I don't know how to find it on cisco.com...
On switch you configure service policy for ingress:
https://tools.cisco.com/Support/CLILookup/cltSearchAction.do?AT=gD&BM=t&CN=%22service-policy%22&IndexOptionId=All%20index%20O
Hi,
you have to add the command:
se-172-22-132-253(config)# ccn subsystem sip
se-172-22-132-253(config-sip)# mwi sip outcall
Cheers
Steffen
Von: ccie_voice-boun...@onlinestudylist.com
[ccie_voice-boun...@onlinestudylist.com] im Auftrag von Mritunja
I only had to show my driver's license. I took my first attempt in RTP and the
second in San Jose.
On Jan 26, 2011, at 10:22 AM, Matteo B. wrote:
> Hello People...
>
> next Friday i'm going to sit for the lab...( cross your finger!! )
> On the confirmation email there is a note that say i've
Your example seems to make no sense since you talk about an IP range of one
subnet, but then discuss excluding addresses from a completely different subnet.
Bottom line.if your IOS dhcp is handing out actual broadcast IDs as IP
addys, then you have an IOS bug.
I would doubt this is the
Good point Claude... I had dspfarm profile configured with both ilbc AND
pass-through. When I removed ilbc and left only pass-through it started
behaving as expected...
I also noticed that with my original configuration I had following
connections set up on the router:
BO25-CE-CCIE#sh sccp con
se
On your other question, the qos srnd is placed on the desktop.
duy
ccie #27737 voice
tmobile g2
On Jan 26, 2011 1:32 PM, "ccieid1ot" wrote:
> Correct me if I'm wrong, isn't trusting the ports setting the ingress and
> service policy is setting on egress?
>
> duy
> ccie #27737 voice
>
> tmobile g
Set it as .255 since it won't hurt.
duy
ccie #27737 voice
tmobile g2
On Jan 26, 2011 1:21 PM, "Shrini" wrote:
> Greetings:
>
> If I need phones to be assigned only specific range of IPs , say from
> 10.10.202.100 to 10.10.202.150 in a /24 network
>
> ip dhcp excluded-address 10.21.20.1 10.21.20.
Correct me if I'm wrong, isn't trusting the ports setting the ingress and
service policy is setting on egress?
duy
ccie #27737 voice
tmobile g2
On Jan 26, 2011 1:21 PM, "Miron Kobelski" wrote:
> Hello,
>
> I'm working on Vol2 Lab8 QoS section. Task 5.2 requires to conditionally
> trust DSCP mark
Just bring your govt assigned id, whether it be a DL or passport.
duy
ccie #27737 voice
tmobile g2
On Jan 26, 2011 1:19 PM, "Matteo B." wrote:
>
> Hello People...
>
> next Friday i'm going to sit for the lab...( cross your finger!! )
> On the confirmation email there is a note that say i've to b
Hi Miron
Very strange …
Fot this lab, I had an issue with rsvp as well, but not the same pb. In the
dspfarm configured as mtp, I put the codec pass-through command line to have
an ILBC negotiation. Without this command, g729 codec negotiation instead.
But your negotiation iLBC seems to w
Hi,
I am running windows 7 and putty connection Manager. It was working, but
now I do not see the rack devices on the side. I have uninstalled and
reinstalled Connection Manager and downloaded a new DB.
Same as before. Any thoughts? My view connection manager is on.
Best Regards,
Randall
Hello,
I'm working on Vol2 Lab8 QoS section. Task 5.2 requires to conditionally
trust DSCP markings from the Cisco IP phone, which can be accomplished with:
mls qos trust device cisco-phone
mls qos trust dscp
But 5.3 requires policing and remarking using service-policy for the same
switch port.
Greetings:
If I need phones to be assigned only specific range of IPs , say from
10.10.202.100 to 10.10.202.150 in a /24 network
ip dhcp excluded-address 10.21.20.1 10.21.20.99
ip dhcp excluded-address 10.21.20.151 10.21.20.*255*
http://www.cisco.com/en/US/docs/ios/12_3/ipaddr/command/referen
Hello People...
next Friday i'm going to sit for the lab...( cross your finger!! )
On the confirmation email there is a note that say i've to bring with me my VUE
ID.
On my profile on vue web site there is no mention of a VUE ID. On my written
score report there is a Candidate ID, that is the
All,
I have 5 voice rack rental vouchers I will not be using. I am selling for
$35 each.
Let me know if you are interested.
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
26 matches
Mail list logo