RE: UL and multiple brand names

Peter, With each UL file there is a "Listing Mark Data Page", this defines what needs to be included on the product for correct usage of the UL mark. Also, in the section general of the file is a section on markings and it defines what needs to be on the name plate. Basically for proper usage

RE: Question regarding something slightly unusual ...

, the reason the keyboard has the Bauart mark rather than the GS mark is that it does not comply with the GS requirements for a German keyboard. But that does not explain the marks on the mouse. Richard Woods Sensormatic Electronics Tyco International -Original Message-

RE: Question regarding something slightly unusual ...

TUV does have a mechanism, they issues the GS mark for products and the Bauart mark for components. Dave Clement Motorola Inc. Test Lab Services Homologation Engineering 20 Cabot Blvd. Mansfield, MA 02048 P:508-851-8259 F:508-851-8512 C:508-725-9689 mailto:dave.clem...@motorola.com

RE: RTTE or LVD for Equipment with E1 SELV interface

.com <mailto:dave.clem...@motorola.com> http://www.motorola.com/globalcompliance/ <http://www.motorola.com/globalcompliance/> -Original Message- From: Joe Finlayson [mailto:jfinlay...@telica.com] Sent: Wednesday, October 02, 2002 9:29 AM To: Clement Dave-LDC009; TREG News

RE: DSL Modems

Dan, I just got DSL service from Verizon in Mass and the second senerio is what I got. They sent me a self install kit which didn't require anyone from Verizon to come to the house for the installation. I just waited until I got a message from them that my line was tied into the DSLAM at the C

RE: DSL Modems

The ADSL modem connects directly to the phone line. The filters go on the rest of your phones in the house to block any interference in the voice band. The ones I have seen would be considered TNV-3 on both sides. But they would at least need to be TNV-2 on the phone side because you would stil

RE: Korea Deviation to IEC60950 CB report.

field, MA 02048 P:508-851-8259 F:508-851-8512 C:508-725-9689 mailto:dave.clem...@motorola.com http://www.motorola.com/globalcompliance/ -Original Message- From: Gary McInturff [mailto:gary.mcintu...@worldwidepackets.com] Sent: Thursday, August 08, 2002 6:17 PM To: Clement Dave-LDC009; EMC

RE: Korea Deviation to IEC60950 CB report.

Seems strange that the IECEE allowed an EMC requirement to be added as a national deviation to a Safety Standard, but they did, and it's even more bizarre that Japan has the same deviation and has no national mandatory EMC requirement. But anyway; There is no requirement that to meet the requirem

RE: ISO 9k/2k relevance

Ron, If you are following the requirements documented in ISO 9k you will be producing product that meets your own and your customers requirements. It specifically requires you to design to statutory and regulatory requirements. It specifically requires you to look for potential sources of non conf

RE: PCB layout question for good EMC performance

Check out "High-Speed Digital Design" by Howard Hohnson and Martin Graham. Rhents rule deals with this topic. Dave Clement Motorola Inc. Global Homologation Engineering 20 Cabot Blvd. Mansfield, MA 02048 P:508-851-8259 F:508-851-8512 C:508-725-9689 mailto:dave.clem...@motorola.com http://www.mot

RE: Safety symbol

The only one I have seen is a house with an arrow pointing in that desigates it's for indoor use. Dave Clement Motorola Inc. Global Homologation Engineering 20 Cabot Blvd. Mansfield, MA 02048 P:508-851-8259 F:508-851-8512 C:508-725-9689 mailto:dave.clem

RE: Accreditation - testing ourselves

(817) 917-5021 amateur call: KB5UKT -Original Message- From: ext Clement Dave-LDC009 [mailto:dave.clem...@motorola.com] Sent: Thursday, May 23, 2002 9:14 AM To: 'am...@westin-emission.no'; 'emc-p...@majordomo.ieee.org' Subject: RE: Accreditation - testing

RE: Accreditation - testing ourselves

From: am...@westin-emission.no [mailto:am...@westin-emission.no] Sent: Thursday, May 23, 2002 8:25 AM >An EMC test lab is accredited according to ISO/IEC 17025. They are also >accredited for many tests as the IEC61000-4-series, EN55022 and many other. >We have previously done some EMC pre-testing

RE: R&TTE DoC Philosophy Question

Kevin, The OJ for the R&TTE Directive lists EMC (EN55022, EN55024, etc) and Safety (EN60950, EN60065, etc) standards as well as the Radio and Telecom standards (well there are no requirements for wireline telco listed). So, if you are declaring to the R&TTE then you should be covered for EMC and

RE: Creating a Reliability Department

From: marti...@appliedbiosystems.com [mailto:marti...@appliedbiosystems.com] Sent: Wednesday, February 13, 2002 4:16 PM To: emc-p...@majordomo.ieee.org >1. The goal is to hire one permanent employee and grow over time. What >are some justifications/success stories/strategies for having a Reli

RE: Spray-on Conductive Coatings

I do not believe it's required. If the plastic/coating and applicator are under the UL746 program then you do not need to do any testing to qualify your product. If it is not then it must be tested. We have been using conductive coatings for 15+ years and as long as the combo is under the UL pro

RE: warranty - guarantee

If you take a look in Websters (http://www.m-w.com); warranty: "a usually written guarantee of the integrity of a product and of the maker's responsibility for the repair or replacement of defective parts" guarantee: "an assurance of the quality of or of the length of use to be expected from

RE: internal modem

Terminal Equipment approval has been privatized and is now under the control of ACTA. Go to their web page http://www.part68.org and you can down load one copy as a freeby of the new ANSI/TIA technical requirements. David Clement Sr. Staff Approvals Engineer Motorola Inc. Global Homologation En

RE: Certificate of Incoorporation???

Andy, "Certificate of Incorporation" usually is the piece or paper from the Secretary of State of the state your company is incorporated in as a business. I have had to provide this as evidence that the company is a real company when doing approval work but it certainly has nothing to do with

RE: Chinese GB/T17626.6-1998 standard

The Chinese are not generating official english copies of these standards. You will either need to find a service that has them translated or have it done your self. David Clement Motorola Inc. Global Homologation Engineering 20 Cabot Blvd. Mansfield, MA 02048 P: 508-261-4389 F: 508-261-4777 C

RE: Print on demand labels - UL/CSA approved

Chris, I introduced this method into the factory about 10 years ago. The first iteration was using die cut myler label stock on a laser printer. It turned out to be very time consuming and you had to print 8 identical (s/n incremented for each) labels at a time. The next step was a thermal tra

RE: Taiwan Contact Point

I thought under the APEC MRA you could get BSMI accreditation via NIST. David Clement Motorola Inc. Global Homologation Engineering 20 Cabot Blvd. Mansfield, MA 02048 P: 508-261-4389 F: 508-261-4777 C: 508-725-9689 E: -Original Message- From: John

RE: Product Marking

From: Dick Grobner [mailto:dick.grob...@medgraph.com] Sent: Wednesday, January 24, 2001 4:01 PM >. I also know that the City of >L.A. is a stickler for a third party mark on a medical device (and I would >suspect other devices as will), if it isn't ther

RE: Brazilian requirements

For Terminal Equipment the generic requirments are; Federal Official Gazette - Ordance No. 322 - Net No. 001/92 There is also a test procedure - No.225-540-514 "Test Procedures for Data Communications Equipment for Transmission Nominal Speed Up yo 28800 Bits/sec" These are published in Portugue