I had a nVIDIA TNT2 64 with 32 mb and I was able to run Q3 Tuxracer, most
other game... I had move this card to a Pentium-IV that I am building... ;-)
Now I am using a Voodoo3 (generic) with only 16 mb in vram, but I am not
familiar with the procedure to anable acceleration on a voodoo card.
hi,
I have LM8.0 and am trying to add CDROM's to the list of packages in
'software manager' with no sucess. When I urpmi a CDROM, the packages
appear in 'software manager', but I have never sucessfully managed to
install one of the packages.
I'm using:-
urpmi.addmedia give the cd a label
On 25.06.2001 00:17:20 Andrew George wrote:
Umm...I think that should be DESKTOP=GNOME
My bad, you are definitely right. Thx for correcting me
Dear friends:
My deep thanks for participating in my informal survey of opinions on
Kword. Looks like there is quite a diversity of opinion here. Either way, I
do look forward to Koffice 1.1 with the new Kword. Then, we'll be in a better
position to judge where Kword is going and how
ping!
Hello everybody.
Here is my problem:
I have installed Oracle Developer 6i on my new Mandrake 8 installation.
But ld can't find the libXt.a labrary during the relinking job.
I found on Suse it is in xdevel.rpm.
But on Mandrake where and how can I find the rpm package containing this
library?
I have a MS K7T Pro2-A motherboard with VIA KT133 chipset (VT82C686B
bridge). Also with IBM DTLA307030 UDMA100 Drive.
Originally I had SUSE 7.0 installed, which ran the disk as a UDMA100
drive with reported (hdparm) transfer rates 35 MB/s.
Since my other systems run Mandrake I installed LM8 on
Ciao,
I wanted to know if there are known issue with my system and Mandrake 8,
since it keeps on 'freezing' with no apparent reason.
I include in this mail the configuration file for my system created with
hard-drake.
Thank, Stefano
?xml version=1.0?
HARDDRAKE VERSION=0.9.3
DEVICES
DEVICE
This is how I burned my MandrakeFreq iso:
cdrecord -v speed=4 dev=0,0,0 MandrakeFreq-20010619-ext.i586.iso
I'm thinking that the -data option you're using is the problem.
-- Stephen
On Monday 25 June 2001 07:26 pm, [EMAIL PROTECTED] wrote:
Greeting Folks,
First off an apology if this
I didn't think it was possible to look at audio cd's with konqueror in
mandrake 8. Isn't that a more recently added feature of koqueror?
You should be able to play the CDs though.
-- Stephen
On Monday 25 June 2001 06:12 pm, Andy Weir wrote:
Hi for the final time (for now),
When I try to
Thanks.
but I finaly found libXt.a is in XFree86-devel.
And libXt.so are in XFree86-libs...
Now relink goes wel and forms60 runs on my system.
On Tuesday 26 June 2001 14:36, Nick Thompson wrote:
XFree86-static-libs-4.0.3-7mdk.i586.rpm
Didier Festers wrote:
Hello everybody.
Here is my
So the answer is nothing over UDMA33 works safely on the via board in the
2.4.3-20 kernel?
-Original Message-
From: civileme [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 26, 2001 10:38 AM
To: Ivan Powis; [EMAIL PROTECTED]
Subject: Re: [expert] LM 8 Kernels , VIA chipsets UDMA100
On
On Tuesday, June 26, 2001, at 11:57 PM, Craig Sprout wrote:
Laurent Duperval wrote:
Hi,
How do I sniff the packets coming thru my network connection? At
home, I
have a cable modem and last night I noticed some activity on it,
though I
know I'm not doing anything using the network.
Hi,
I have an ill-behaved application that sometimes takes all available memory
and totally freezes up my machine. Is there anyway to limit user memory? I
would like to keep at least 32 MB available at all time by the root user so
that I can at least switch to a VC to kill the offending program.
I've experienced this in 7.2 as well as 8.0, but it's worked fine in
every RH distro I've tried. When I try to run chattr on a particular
file, it always returns the following error:
chattr: Inappropriate ioctl for device while reading flags on
/etc/lilo.conf
(This time the file being
Hai All,
Had anyone used lucent orinoco cards on linux 2.4? I am unable to
compile the drivers. Help!
Thanks,
Amaresh.
Look for snort. This is perhaps one of the best sniffers/security tools
available. It is not difficult to learn, has many switches and configuration
possibilities. Just mentioning it is bringing a tear to my eye, I'm getting
so choked up...
Get snort. You will not be sorry.
On Tuesday 26
Hi,
I'm writing a program where I need to validate a users password.
Right now I'm using crypt and code like the following:
pentry is a pointer to a passwd struct obtained by using the users
userid.
err is in a int initialized to 0;
userpass is a c string containing the users plaintext
Thank you for the assistance! I added the mrproper and install and it worked
flawlessly! Thanks for the info!
-Original Message-
From: Tom Brinkman [mailto:[EMAIL PROTECTED]]
Sent: Tuesday, June 26, 2001 11:15 AM
To: [EMAIL PROTECTED]
Subject: Re: [expert] LM8.0 Kernel Compile error
On
On Tuesday 26 June 2001 13:26, Praedor Tempus wrote:
Look for snort. This is perhaps one of the best sniffers/security tools
available. It is not difficult to learn, has many switches and
configuration possibilities. Just mentioning it is bringing a tear to my
eye, I'm getting so choked
The easiest is to use it as webmail (www.hotmail.com)
I don't know how to configure mail clients for this kind of account.
Salu2,
Oscar.
El Mar 26 Jun 2001 01:04, escribiste:
Hi again-again,
at the moment, I use 'the other operating system' for my email.
I have LM8.0 and a Hotmail account
Hi All,
I am trying to configure an NE200 network card using Draknet. The card
is an old ISA jobby and was not rcognised at install time. When I run
Draknet it will configure my modem quite happily but when it comes to
configuring the network card I select the proper driver but the card
Excuse me for re-sending this mail.
It's very important for me.
Thanks.
Salu2,
Oscar.
-- Mensaje Reenviado --
Subject: Problems with ACER 620U scanner
Date: Mon, 25 Jun 2001 20:40:13 +0200
From: Oscar [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Hi.
I have a problem with the USB
Hey all,
I'm trying to set up an ftp site, very basic and running only when I am
here, but it's giving me a lot of grief.
Now, I've added user myftpuser and selected that user's group to be ftp,
but when I try to ftp in I get an error in my syslog that states that
PAM_listfile: Refused user
I'm able to access yahoo email account with Kmail, but I've never tried
hotmail.
Robert
On Tuesday 26 June 2001 01:57 pm, Oscar wrote:
The easiest is to use it as webmail (www.hotmail.com)
I don't know how to configure mail clients for this kind of account.
Salu2,
Oscar.
El Mar 26 Jun
Hello all,
I have a bit of a problem.
My company has several high-volume servers running Mandrake Linux, and all
have been recently upgraded to 8.0 with no problems. However, on the two
Compaq 1850r (Pentium III 550, Intel chipset) I was just sent, 8.0 will not
install. 7.2 installs
Someone posted this to the KDE-USER mailing list a while ago and the consesus
was that it can't be done with hotmail. The _only_ utility that can read
mail remotely from hotmail is. (drum roll please) .. MS Outlook
Express... Go figure.
On Tuesday 26 June 2001 18:56, Robert B
Dear all,
I tried to install an external floppy driver on a LM7.2 machine and on a
Red Hat 7.1.
The floppy driver is a USB device.
It seems to detect correctly the USB part on both distros, but for some
reason when
I try to mount /mnt/floppy, the system is unable to assign automatically
the
was wondering a question along these same lines.
ML8.0 and KDE2 is absolutely beautiful, at least for
the length of time I was able to see it. I could use
either xfree 3.x or xfree 4.x with no change to the
following problem.
I too have locking or freezing on 8.0
I have a KA-6100 viachipset
Has anyone gotten bad fonts after upgrading to MandrakeFreq for LM8? How can
you fix this.
I have anti-aliasing turned on, and am using NVidia's drivers for the
geforce2.
-- Stephen
http://www.santafefish.com
Some activity?
Wow are you lucky.
Cable modems are a shared resource. As such you basically share a fat
pipe with everyone in a several MILE radius.
I frequently use iptraf (set to promiscuous mode) to find out who is
hogging the bandwidth.
Since it displays the sites (it does DNS resolves
On Tuesday 26 June 2001 01:27, Julia A. Case wrote:
Quoting civileme ([EMAIL PROTECTED]):
It has to be set up as usb-storage (autoload as soon as you
connect). cdrecord -scanbus will then see it.
Ok, I got usb-storage to load (after loading scsi_mod), but a
lsmod shows it as unused)
On 31 May, Sarang Lakare wrote:
You are indeed missing something--look at the amount used for buffers and
cache. This can be freed by the system when a program issues a malloc()
call. It can be grabbed again from the free memory pool when the program
releases it and turned to the same
On Tuesday 26 June 2001 13:04, Stefano Bianchi wrote:
Ciao,
I wanted to know if there are known issue with my system and
Mandrake 8, since it keeps on 'freezing' with no apparent
reason. I include in this mail the configuration file for my
system created with hard-drake.
Thank, Stefano
Can anybody point me to a good source of info on setting up iptables?
Thanks, Nick.
Laurent Duperval wrote:
Hi,
How do I sniff the packets coming thru my network connection? At home, I
have a cable modem and last night I noticed some activity on it, though I
know I'm not doing anything using the network. How can I sniff what's going
on there?
Ethereal is a packet
On Tuesday 26 June 2001 13:46, Ivan Powis wrote:
I have a MS K7T Pro2-A motherboard with VIA KT133 chipset
(VT82C686B bridge). Also with IBM DTLA307030 UDMA100 Drive.
Originally I had SUSE 7.0 installed, which ran the disk as a
UDMA100 drive with reported (hdparm) transfer rates 35 MB/s.
On Monday 25 June 2001 07:26 pm, [EMAIL PROTECTED] wrote:
I am having a devil of a time burning the 8.0 ISO's. The
command I am using is:
cdrecord -v speed=2 dev=0,0,0 -data Mandrake80-inst.iso
and what end up with on the cd is unbootable garbage. The burner
works fine using kioscd. Any
On Monday 25 June 2001 06:12 pm, Andy Weir wrote:
When I try to access an audio cdrom in Konqueror, I'm locked out
(data cdrom's automount fine).
Audio CD's can't be mounted, so you can't see them in a file
manager. Windoze's uses a brute kludge to do it, but Linux doesn't
bother.
hello
i have used this isp in NZ with mandrake 7.2 with a hardware internal
modem, it woked like a breeze, now when i have switched to mandrake 8.0,
it connects but the connection is very slow, eg. i get like 0.5 kbps
when i was getting about 5.5kbps in LM 7.2 especially for ftp downloads
and
Hi all!
I have difficulties with recognition of a CD-writer from LM7.2 and
RH7.1. The problem is as
follows: the CD-writer is a PCMCIA. The card itself seems to be
recognized (it beeps, but I do
not know what log file should keep track of this). But when I try to
burn the CD, xcdroast complains
42 matches
Mail list logo