Hi, Here is some steps to use mib520 in open suse, I hope this will be
helpful:
1. have a look at this link:
http://www.tinyos.net/tinyos-2.x/doc/html/tutorial/programmers.html
2. using dmesg you should see two ports to be assigned once you plug
mib520 into you system. To confirm t
Hi TinyOS developers.
Our company is starting some new embedded development, and would like
to do this development in TinyOS 2.x rather than 1.x (nicer docs and
easier development. Includes Dissemination and Collection network
algorithms, etc).
Our main problem with using TinyOS 2.x is that Delug
Hello coders,
I have question regarding uint16_t type. I was assuming that it is 16bit
unsigned integer.
But when I use such type, and set a value over 32K, I receive a warning
during compilation, an example is:
/ */
const uint16_t FT_TIMER_MIN = 6;
/**/
The result from comp
Did Tinyos support another storage chip, at45db041d ? It seems a totally
different chip with at45db041b which was out of date and atmel stopped it
from last year.
If someone has developed the driver of this chip in tinyos 2.02, it will be
a big help for me.
Handsomezhu
2007-12-19
-邮件原件-
发
I guarantee that it will be worth it. TOS2 is fundamentally more
robust, flexible, and sound going forward. The learning tools and
examples are coming into place. Hanging on to TinyOS1.x "dusty desk" at
this point would surely be penny wise pound foolish.
Philip Levis wrote:
On Dec 16, 20
Dear All,
Is the current MAC protocol in TinyOS B-MAC or X-MAC? I searched on
tinyos.net and it seems to be B-MAC. I just want to confirm. Thanks.
--
Regards,
Tie
___
Tinyos-help mailing list
Tinyos-help@millennium.berkeley.edu
https://www.millennium.b
Sorry. Ignore my last mail. I didn't catch that it is complaining not for
the type of the variable, rather for the constant in the declaration. So I
have changed the line to be:
/ */
const uint16_t FT_TIMER_MIN = (uint16_t)6;
/ */
And there is no warning any more.
Regards
Hi,
I noticed that TOSSIM uses the following formula to compute RSSI:
rcv->strength = (int8_t)(floor(10.0 * log(pow(10.0, power/10.0) +
pow(10.0, noiseStr/10.0)) / log(10.0)));
(in CpmModelC.nc)
I notice that this is adding the signal power (gain) and noise
levels. I am wondering if t
I just checked and there was no one for Gedit. This is the one I created
based on the cpp one.
It goes in */usr/share/gtksourceview-2.0/language-specs/ncc.lang *on Ubuntu
Gutsy.
I doesn't (yet) automatically apply the style to .nc files (you have to
check View-> Highlight mode -> Sources -> NesC)
Another way to do it is to specify the type of the constant:
const uint16_t FT_TIMER_MIN = 6U;
The U makes it an unsigned int constant. You can also append an L to make it
a long:
const uint32_t ONE_MILLION = 100UL;
HTH,
Michiel
> -Original Message-
> From: [EMAIL PROTECTED] [mai
Dear all,
we are currently porting to TOS 2.0 a TOS 1.1 application that read from
multiple external analog sensors.
All has been quite straightforward but unfortunately, it seems that ADC
pins now show a far lower
input impedance seriously affecting the measurements.
It seems to be an ADC pin
Could be you be more specific about the platform and the version of TinyOS
you are using ?
-Avinash
On Dec 18, 2007 8:23 PM, Tie Luo <[EMAIL PROTECTED]> wrote:
> Dear All,
>
> Is the current MAC protocol in TinyOS B-MAC or X-MAC? I searched on
> tinyos.net and it seems to be B-MAC. I just want t
Hello,
Can anyone tell me what the function of XSensorMDA320 application is? I want
to know what to install in the sensing mote which is connected to MDA320 and
what to install in the base station node in order to see the functionalities
of this application. How can I monitor the signals of MDA320
Miklos Maroti wrote:
The only important thing is how stable that oscillator is,
and I do not
care if the rate is 5% off as it is quite easy to compensate for that
in software.
Yes, a software mostly approach is bettor for tinyOS at this time, you're right.
I'll still be thinking of a good way
Saverio De Vito wrote:
Dear all,
Provided that we only
implemented AdcConfigure for all sensors
There is a new interface for multiple reads on MSP430.
What platform do you use? There is a MSP430 example here that may help:
http://tinyos.cvs.sourceforge.net/tinyos/tinyos-2.x-contrib/ecosens
Dear all,
Any one knows where can I find the XListen tool under MoteWorks?
Best,
Abdullah Kadri, P.Eng., Ph.D. Candidate
The University of Western Ontario
Department of Electrical and Computer Engineering
Phone: (519) 661-2111 ext. 81271
___
Ciao,
prima di tutto dovresti scrivere in inglese per avere qualche risposta ;)
Per avere una misura di tempo, la suluzione migliore è usare i timers
dell'atmega128, o del controllore che usa il tuo nodo. Sono molto precisi e
puoi misurare tempi, oltre che settare firings.
ciao
On Dec 18, 2007 8:
Hello all,
I am trying to change the default code in RXFIFO.readDone in TOS2.0.
I have some doubts on some parts of the code. I have some basic questions:
1. What is the meaning of the return of the following functions call
FIFO.get() and call FIFOP.get()?
2. If I have more than one packet
Hi David,
I tried to search for the PacketLink component, but it seems not many
people is using it, moreover it does not have any kind of reference in
nesdoc, only the TEP.
I found the example of PacketLink, more specific TestPacketLink, in the
tinyos-2.x-contrib folder and even after i update
Hi
I have had this /exact/ same issue with MICAz motes in TinyOS-2.x! I
compiled and recompiled apps/null as provided with the tos2 download but the
current consumption for my motes was /always/ well over the suggested 5-10uA
by at least around 100uA, usually more like 400-500. I found that /most/
On Dec 19, 2007 6:41 AM, Ariel Mauricio Nunez Gomez
<[EMAIL PROTECTED]> wrote:
> I just checked and there was no one for Gedit. This is the one I created
> based on the cpp one.
> It goes in /usr/share/gtksourceview-2.0/language-specs/ncc.lang on Ubuntu
> Gutsy.
>
> I doesn't (yet) automatically ap
Hi all,
i am trying to implement an application that uses multihopping(I'm using Surge,
as it is in examples). I execute the application with this command line
/surge/build/pc/main.exe -gui 7 & tinyviz
first of all i enable SetLocation plugin on tinyviz, then i move motes clicking
and dragging o
Xlisten tool has been replaced by XServe in MoteWorks and this can be
found under \opt\MoteWorks\tools\xserve.
- Giri
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Abdullah Kadri
Sent: Wednesday, December 19, 2007 9:08 AM
To: tinyos-help@millenn
Try updating to libc 1.4 or greater.
Kevin
On Dec 18, 2007 7:10 PM, yvonne er <[EMAIL PROTECTED]> wrote:
> I am using avr-libc 1.2.3-1 on micaz motes. Please advice.
>
> Thank You.
> Yvonne
>
>
> On Dec 19, 2007 9:31 AM, Kevin Klues <[EMAIL PROTECTED]> wrote:
>
> > Which platform are you compili
Does XServe work for both XSensor and XMesh applications?
Abdullah Kadri, P.Eng., Ph.D. Candidate
The University of Western Ontario
Department of Electrical and Computer Engineering
Phone: (519) 661-2111 ext. 81271
_
From: Giri Baleri [mailto:[EMAIL PROTECTED]
Sent: Wednesday, Dec
Hi everybody,
I'm triyng to run up TOSSIM in an Ubuntu Box with Python 2.5.
So, all the compilation process is going right, but when I try to import the
TOSSIM module I obtain this error:
>>> import TOSSIM
Traceback (most recent call last):
File "", line 1, in
File "TOSSIM.py", line 4, in
On Dec 19, 2007, at 6:09 AM, Tal Rusak wrote:
Hi,
I noticed that TOSSIM uses the following formula to compute RSSI:
rcv->strength = (int8_t)(floor(10.0 * log(pow(10.0, power/10.0) +
pow(10.0, noiseStr/10.0)) / log(10.0)));
(in CpmModelC.nc)
I notice that this is adding the signal powe
On Dec 19, 2007, at 9:00 AM, roberto pagliari wrote:
Ciao,
prima di tutto dovresti scrivere in inglese per avere qualche
risposta ;)
Si. Posso leggere un po d'italiano, mai sempre un po. Anche, penso
che non sono nella majority. :)
Phil
___
Ti
The XSensorMDA320 is app samples data from the ADC and/or DIO channels
and forwards it to UART (when connected directly to a PC via MIB board)
or over the radio to a base station running TOSBase. The data received
over the UART of the MIB board can be viewed using XServe/XSniffer tool.
Please refer
Thanks Giri.
Please correct me if I am wrong. MDA320 and MIB520 can not connect to each
other through the 51 pin junction, can they? I tried but I could not do this
because J3 on MIB520 hinder the MDA320 board.
Cheers,
Abdullah Kadri, P.Eng., Ph.D. Candidate
The University of Western Ontario
Hi Tiago -
The TestPacketLink directory is for TUnit unit testing, and will not compile
or run under normal circumstances.
The interface itself should be easy to use: simply use the PacketLink
interface in your BaseStation app, and wire it to CC2420ActiveMessageC.
You'll also need to define the
1. FIFO and FIFOP are GPIO pins provided by the CC2420 radio. These are
status pins, and I believe they're used to indicate data exists in the RX
FIFO that can be read out by the microcontroller. The datasheet provides
more details.
2. If you haven't toggled the CSN line, and haven't used the S
1.) Initially, the plan was to write a new storage manager for Deluge
T2. Unfortunately, it never got completed, and Deluge T2 is still
using a simple storage manager.
2.) Yes, this is not in the current Deluge T2.
3.) To add more image volumes, just update the volume XML file and a
wiring
Thanks everyone,
I am indeed using the usb red board tmote mini development kit. The
tmote-bsl worked fine on windows with tinyos-2.x, but I'm having some
problems with the linux version, from linux/moteiv-
tools-0.2-20070507-i386.tar.gz in the install CD. When I run on the terminal
I get
[EMAIL
Hi Philip. I'm glad to see you know italian a little bit :) we met at
sensys, I had the demo regarding synchronization by using pulse coupled
oscillator. Leonardo asked if it is possible to measure the time elapsed
from the last firing of a timer_repeat timer. I simply answer he should use
atmega t
yeah, the FIFOP pin is triggered whenever the number of bytes, tipically set
to the length of the message, is equal or exceeds a programmable threshold,
while the FIFO pin indicates if there are bytes buffered by the radio and
available to be downloaded.
On Dec 19, 2007 12:14 PM, David Moss <[EMAI
I have been working on a project with a telos rev A for the last couple of
months. I have run into a brick wall recently. We are trying to read an
external accelerometer and send the raw date. That's it. The problem is that
I can read and send the x-axis no problem but I cannot seem to read all
thr
37 matches
Mail list logo