[sw-issues] [Issue 17171] Paragraph cannot be longer than 65534 characters
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=17171 --- Additional comments from mike_h...@openoffice.org Fri May 21 07:20:14 + 2010 --- The tone of the discussion here has changed a little from 'this isn't something that is needed' to 'this is very difficult'. Thanks for that. Here are some observations: - OOO later can generally be interpreted as 'never' - on the other hand, as the previous change from 8 to 16 bits shows, this is something that will be needed eventually for a professional product - it seems intuitive that in high quality code, size should be set by a parameter, as even 32 bits is unlikely to be the final buffer size To what extent would it be practical to start preparing for the change, so that it was much less significant when eventually attempted? For example, would it be practical to slowly convert the code so that the current 16 bit implementation is based on a parameter? If it was, the amended class and methods could be introduced slowly by all developers as they enhance code for other reasons. It would also allow anyone who was particularly interested in making this change to start preparation for it within the standard code and it may well be that some automation of the changes might be possible. It would also allow experimental 32 bit buffer builds and testing. After some time, regrettably probably several years, the remaining conversion would be much less of a problem, though as mba clearly explained, it would not be insignificant. If nothing is done, the problem can only become harder and harder. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 17171] Paragraph cannot be longer than 65534 characters
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=17171 --- Additional comments from mike_h...@openoffice.org Sun Jan 3 23:15:49 + 2010 --- @anoopshah Those are very imaginative approaches, but do they resolve the problem? The difficulty is that the suggestions, particularly the first, add unnecessary complexity and it's not obvious that the extra coding required would be less than doing the job properly. Writer is perfectly capable of handling a document with more than 65534 characters. Why can't a paragraph be paged in and out in an analogous way to a document? That might improve rather than detract from performance. The bottom line is that there are users who need very large paragraphs, whether because of the nature of the document or as an interim step in editing large documents. A 100 page book isn't very long in this context. Hard limits were common in early application software. Later, it was generally accepted that limits should be imposed only by what the hardware can handle. I understand that this may be a very difficult issue to fix within Writer, but it seems inevitable that the limit must be removed one day. A professional product would have this capability. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[installation-issues] [Issue 106346] upgrade do not kill OO pr ocess and do not work
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=106346 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' Status|UNCONFIRMED |RESOLVED Resolution| |WONTFIX --- Additional comments from mike_h...@openoffice.org Tue Dec 22 08:20:12 + 2009 --- There was a problem with 3.1. I have struggled with it for some months. It is most easily seen if you try to uninstall 3.1 from Control Panel Add or Remove Programs OpenOffice.org 3.1 Remove The removal process starts, but eventually reports that OpenOffice 3.1 is running and, as no instance is running, removal stops. After quite a lot of experimentation, the following resolved the problem. I am not sure if all the steps are necessary, but this is what I did: 1) Make sure the files for OpenOffice 3.1 are still on the desktop. Mine were in the Recycle bin and needed to be restored. If the files aren't on the desktop or the Recycle bin, you may need to create them on a different PC and copy them across. 2) In the Control Panel dialogue shown above, instead of clicking Remove, click Change and then on the Program Maintenance screen check Repair and click Next. Repair progressed most of the way, but didn't seem to complete normally. 3) Then, from the Program Maintenance screen, click Remove and follow the prompts. The application is successfully removed. 4) A new version of OpenOffice can then be installed. As I believe this is probably a problem specific to 3.1, I am marking this as 'Wontfix'. Please reopen if it happens with a later version, or if the procedure above does not resolve the problem. - - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@installation.openoffice.org For additional commands, e-mail: issues-h...@installation.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[installation-issues] [Issue 106346] upgrade do not kill OO pr ocess and do not work
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=106346 User mike_hall changed the following: What|Old value |New value OS/Version|All |Windows, all Version|OOO320m2 |OOo 3.1 --- Additional comments from mike_h...@openoffice.org Tue Dec 22 10:20:55 + 2009 --- Changed OS to Windows all and version to OOo 3.1 (the problem is there, not with the version you are trying to install). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@installation.openoffice.org For additional commands, e-mail: issues-h...@installation.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 75622] Calc: better for autocompl et *not* to change upper/lower-case when leavi ng cell
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=75622 User mike_hall changed the following: What|Old value |New value CC|'khirano,kpalagin'|'khirano,kpalagin,mike_hal | |l' --- Additional comments from mike_h...@openoffice.org Fri Oct 2 22:27:07 + 2009 --- Current behaviour is non-intuitive for other reasons. Enter any string eg AbCdefg After entry, go back and try to edit the string to eg Abcdefg You can't, unless you know about using ' The majority of users won't. When you explicitly edit a string, it certainly should be accepted. On the other hand, Excel works intuitively and AFAIK always has. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 76277] AutoFilter: Not intuitive. .. Make it like Excel please!!!
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=76277 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 59229] Autofilter does not recogn ize added entries
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=59229 User mike_hall changed the following: What|Old value |New value CC|'baumux,chris_mux,clutz,co|'baumux,chris_mux,clutz,co |rnouws,mux2005,pagalmes,pm|rnouws,mike_hall,mux2005,p |ike,qacaster,thing' |agalmes,pmike,qacaster,thi | |ng' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sc-issues] [Issue 85305] Dynamically grow a filtere d range for autofilter, standard filter, and a dvanced filter
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85305 User mike_hall changed the following: What|Old value |New value CC|'aceman_ooo,camillem,fl,ga|'aceman_ooo,camillem,fl,ga |by72,kamataki,kpalagin,man|by72,kamataki,kpalagin,man |ens,masayan,pagalmes,raal,|ens,masayan,mike_hall,paga |rail' |lmes,raal,rail' --- Additional comments from mike_h...@openoffice.org Fri Aug 28 10:37:27 + 2009 --- Not having an inbuilt 'automatic' spreadsheet range extended when more data is added is very non-intuitive. This is something that naive users would find very difficult to understand and debug. I found the reason for only by accident. Suggest that the target is changed to 3.2 or if that isn't possible, then 3.2.1 or 3.3. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sc.openoffice.org For additional commands, e-mail: issues-h...@sc.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 2838] AutoCorrections does not ma tch case of the words that AutoCorrect replace s.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=2838 User mike_hall changed the following: What|Old value |New value CC|'cbrunet,erikanderson3,kre|'cbrunet,erikanderson3,kre |ationz,pagalmes' |ationz,mike_hall,mlissner, | |pagalmes' --- Additional comments from mike_h...@openoffice.org Sun Dec 14 21:10:13 + 2008 --- This seems a fundamental requirement of any reasonable autocorrect facility and it's probably not hard to do. OOo Later does not seem right. Any chance of bringing it forward to 3.2? cc'd self and mlissner - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 81194] Autocorrect does not diffe rentiate the lower and upper case
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=81194 User mike_hall changed the following: What|Old value |New value CC|'mike_hall' |'' --- Additional comments from mike_h...@openoffice.org Sun Dec 14 21:13:34 + 2008 --- @mlissner This is a duplicate of #2838, which is still open, thus no need to reopen this one. I have cc'd you on that issue. I agree that it is a fundamental requirement. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[sw-issues] [Issue 94743] changedby note incorrectly appears on opening html document
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=94743 --- Additional comments from mike_h...@openoffice.org Fri Dec 12 10:33:28 + 2008 --- I believe it is a regression, because of the multiple notes that get generated. It's certainly arguably a 'regression' visually and it will confuse people. I understand the problem of the stalled html import/export, but arguably this is another of those silly little bugs that makes OOo look a mess, gives it a bad reputation and makes it easy for those who wish to criticise it. If it can't be fixed properly in the 3.x series, can we not completely disable the notes code in html import/export, which would be better than the current mess? If not, I don't feel that OOo Later (which effectively means never) is acceptable. Sorry to preach, but I'm seriously concerned about the impact of new functionality on users when bugs are introduced or exposed as a result. I'd really like to influence the culture and perception of the development teams to take responsibility for 'collateral damage' as well as for their own stuff. It's really not working right just now. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: issues-unsubscr...@sw.openoffice.org For additional commands, e-mail: issues-h...@sw.openoffice.org - To unsubscribe, e-mail: allbugs-unsubscr...@openoffice.org For additional commands, e-mail: allbugs-h...@openoffice.org
[framework-issues] [Issue 4756] Expand shortcut possibiliti es (Use of Alt key is not offered)
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=4756 --- Additional comments from [EMAIL PROTECTED] Fri Nov 14 15:47:32 + 2008 --- I can see no possible reason why this option should not be adopted. Flexibility is usually the hallmark of OpenOffice and is better encouraged than opposed. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 92377] Document lost (0 ko) when the hard drive is full and you try to save it
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92377 --- Additional comments from [EMAIL PROTECTED] Sat Nov 8 18:57:18 + 2008 --- Have tried very hard to create this problem with a 100Mb Iomega Zip drive. I have not managed to confirm the issue with Writer with 3.0 and m35 on Win XP or with 2.4.2 on Vista. In every case the original file is not corrupted when the I/O disk full error appears. There were several odd effects though, for example a corrupted file was written at one point that turned out to be the first 22 pages of a document. Also, the lock file is deleted when you start to save a file, so protection is lost. I think someone else could then open the file read/write, not tested. Will also try with Calc. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 92377] Document lost (0 ko) when the hard drive is full and you try to save it
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92377 --- Additional comments from [EMAIL PROTECTED] Sat Nov 8 19:06:34 + 2008 --- Same thing with Calc with m35. Can't damage the file on a full drive, but the lock file is deleted. I will raise an issue for that. Re the reported issue, it's Worksforme with a zip drive, but a Memory stick might do something different. @pagalmes What do you want to do now with this issue? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 95995] lock file deleted if file is full
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95995 Issue #|95995 Summary|lock file deleted if file is full Component|framework Version|DEV300m35 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|ui Assigned to|tm Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Sat Nov 8 19:17:42 + 2008 --- In saving an edited file to a full disk, if the disk is full (I/O error, not enough space) the lock file is deleted even though the document is still open. Another user could potentially open the file read/write. Also, in some circumstances it is possible to write a corrupt partial file to the disk. The file could be recovered and (in this case) had the first 22 pages of the document. See also http://www.openoffice.org/issues/show_bug.cgi?id=92377 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 92377] Document lost (0 ko) when the hard drive is full and you try to save it
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92377 --- Additional comments from [EMAIL PROTECTED] Sat Nov 8 19:18:30 + 2008 --- See also http://www.openoffice.org/issues/show_bug.cgi?id=95995 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 95995] lock file deleted if disk is full
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95995 User mike_hall changed the following: What|Old value |New value Summary|lock file deleted if file |lock file deleted if disk |is full |is full --- Additional comments from [EMAIL PROTECTED] Sat Nov 8 19:24:07 + 2008 --- Correcting summary - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 92377] Document lost (0 ko) when the hard drive is full and you try to save it
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92377 --- Additional comments from [EMAIL PROTECTED] Fri Nov 7 14:51:06 + 2008 --- @pagalmes OK, point is well made. I think I have a way of testing this. Will revert. Apologies for duplicate entry previously... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 85328] Formula in spreadsheet int erpreted as text
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85328 --- Additional comments from [EMAIL PROTECTED] Fri Nov 7 23:17:29 + 2008 --- @discoleo The two examples in your revised attachment spreadsheet are equally easy to explain. The average example is exactly as before. Type a number anywhere in the B2:B77 range, edit the formula in any way and return to current, press return and the formula computes. The problem with the sum is that the cell is formatted as text. Change the format to 'all', edit and change back the formula, press return and the formula computes. Apologies, I agree that 'wontfix' was incorrect. But I think 'invalid' is a fair assessment. Please check out the above and see if we can agree to that. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 85328] Formula in spreadsheet int erpreted as text
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85328 --- Additional comments from [EMAIL PROTECTED] Sat Nov 8 00:20:55 + 2008 --- OK, I think you are changing the issue slightly. Perhaps we are iterating towards a better description. I don't think the problem (and I can see more of a problem now) is to do with formulas, it's to do with the format of the cells in column A, which seem to be inconsistent. The problem can be resolved in various ways, but with some difficulty (eg changing the format of column A globally to 'all' doesn't work). I'm guessing that something in the XML file must be wrong, but although I can see the XML via Winzip, working out what is wrong is beyond my technical knowledge. However, I agree it would be better if Calc did not end up in this muddle, however badly the original file was written. Suggest we change the description to 'Calc fails to recognise and resolve inconsistent cell formats'. With that description, I'd be happy to mark the issue as 'new'. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 95719] html export doesn't respec t line spacing
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95719 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Sat Nov 1 08:27:10 + 2008 --- Worksforme with m34 - but very different html is generated. Please try in your language version from http://ftp.linux.cz/pub/localization/OpenOffice.org/devel/DEV300/DEV300_m34/Build-1/ to see if the problem is resolved. Please identify which language version you are using (presume IT?) The problem with the html you cite is not that margin-bottom isn't working - it is. However, as margin-top is not defined, default spacing is used. Add margin-top:0; to the Western style in your html to confirm that. Thus, the problem might be that margin-top is not being generated for the paragraphs concerned. However, in your .odt attachment it is the default paragraph which has margins set to 0, whereas I think the original may have been using multiple styles to generate the html example you included at the beginning. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 95719] html export doesn't respec t line spacing
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95719 User mike_hall changed the following: What|Old value |New value Keywords| |needmoreinfo --- Additional comments from [EMAIL PROTECTED] Sat Nov 1 08:29:24 + 2008 --- ...setting needmoreinfo - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 95719] html export work different ly on Win and Linux; on Linux line spacing se ems wrong
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95719 User mike_hall changed the following: What|Old value |New value Ever confirmed| |1 Status|UNCONFIRMED |NEW Summary|html export doesn't respec|html export work different |t line spacing|ly on Win and Linux; on Li | |nux line spacing seems wr | |ong Version|OOo 3.0 |DEV300m34 --- Additional comments from [EMAIL PROTECTED] Sat Nov 1 17:44:45 + 2008 --- On windows XP with m34 and your file, I'm getting: HTML HEAD META HTTP-EQUIV=CONTENT-TYPE CONTENT=text/html; charset=windows-1252 TITLE/TITLE META NAME=GENERATOR CONTENT=OpenOffice.org 3.1 (Win32) META NAME=AUTHOR CONTENT=Paolo META NAME=CREATED CONTENT=20081031;21280300 META NAME=CHANGEDBY CONTENT=Mike Hall META NAME=CHANGED CONTENT=20081101;8155600 META NAME=Info 1 CONTENT= META NAME=Info 2 CONTENT= META NAME=Info 3 CONTENT= META NAME=Info 4 CONTENT= /HEAD BODY LANG=it-IT TEXT=#00 DIR=LTR DL DTFONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONTDT FONT FACE=Times New RomanFONT SIZE=3Asdf asdf a safd s safd s/FONT/FONT/DL /BODY /HTML ... which as you can see is quite different, and works correctly. I can't confirm your specific problem as I don't run Linux, but we can at least say that XP and Linux HTML export give different results. Marking as NEW and editing summary slightly. Thanks for your quick response. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 95719] html export work different ly on Win and Linux; on Linux line spacing se ems wrong
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95719 --- Additional comments from [EMAIL PROTECTED] Sat Nov 1 22:34:37 + 2008 --- Paolo, No I'm doing Save As Html... the same as you, starting from your .odt document. I've just tried with 2.4 (Pavel's m8) on a different PC and I get (and thus can confirm) the issue you originally raised. My alternate html comes from '3.0.1' m34 on Windows. Perhaps this is a new change in functionality which has made it into the Windows m34 build but not into the Linux one. You could try the Italian Win m34 from the link you used for the Linux version to see if you can get the same result. If you do, then it might be worth waiting a version or two to see if the Linux code catches up. I don't understand enough about the process to check what's included in what. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 92377] Document lost (0 ko) when the hard drive is full and you try to save it
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92377 --- Additional comments from [EMAIL PROTECTED] Fri Oct 31 23:53:20 + 2008 --- @pagalmes This is a dangerous issue to test because a full disk can cause all sorts of problems including impossibly slow performance and could even lead to directory corruption. Was this your main disk or a secondary one? A system cannot run properly with all its disks full. You get plenty of warning messages from Windows well before a main disk gets full. If you have more than one hard disk, the easy 'workaround' would have been to save the document on another disk before making some space on the full one or possibly saving on removable media. Although the issue is potentially serious, full disks don't happen very often, so few users will be affected, so this issue may not get immediate attention or confirmation. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 92416] won't print in calc
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92416 User mike_hall changed the following: What|Old value |New value Keywords| |needmoreinfo --- Additional comments from [EMAIL PROTECTED] Fri Oct 31 23:56:40 + 2008 --- @neo442. Please advise whether the problem has been resolved in a later version. If not, does it happen with all calc documents? If a specific one, please attach an example. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 92377] Document lost (0 ko) when the hard drive is full and you try to save it
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92377 --- Additional comments from [EMAIL PROTECTED] Fri Oct 31 23:56:58 + 2008 --- @pagalmes This is a dangerous issue to test because a full disk can cause all sorts of problems including impossibly slow performance and could even lead to directory corruption. Was this your main disk or a secondary one? A system cannot run properly with all its disks full. You get plenty of warning messages from Windows well before a main disk gets full. If you have more than one hard disk, the easy 'workaround' would have been to save the document on another disk before making some space on the full one or possibly saving on removable media. Although the issue is potentially serious, full disks don't happen very often, so few users will be affected, so this issue may not get immediate attention or confirmation. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 92416] won't print in calc
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92416 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Fri Oct 31 23:57:36 + 2008 --- added cc... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 91335] OpenOffice workarea is not immune to system theme.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91335 User mike_hall changed the following: What|Old value |New value Keywords|needmoreinfo | --- Additional comments from [EMAIL PROTECTED] Thu Oct 30 22:52:06 + 2008 --- OK, it does sound like a defect then. It needs someone else to confirm it on Linux... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 90408] a look onto the background tab in a paragraph/cell template changes back ground setting
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90408 --- Additional comments from [EMAIL PROTECTED] Thu Oct 30 23:33:59 + 2008 --- @mroe re Counter Example Yes, exactly, the Counter Example means that this kind of defect does *not* qualify as P2. (This terminology is often used in English, but it may not be so readily understood by DE native speakers.) Look at the Counter Example for P1 to see that this interpretation is what is intended. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 90408] Paragraph/cell style incor rectly changed by click on background tab
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90408 User mike_hall changed the following: What|Old value |New value Summary|a look onto the background|Paragraph/cell style incor | tab in a paragraph/cell t|rectly changed by click on |emplate changes background| background tab | setting | --- Additional comments from [EMAIL PROTECTED] Thu Oct 30 23:38:29 + 2008 --- changing summary - meant do do this before... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 90408] a look onto the background tab in a paragraph/cell template changes back ground setting
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90408 --- Additional comments from [EMAIL PROTECTED] Wed Oct 29 21:48:52 + 2008 --- -mroe Comments were intended to support the issue. Presume your main concern is about the change to P3. The change was based on no data loss, only formatting loss and there is an 'easy' workaround (don't click on the background tab). You can even get the default back (create a new style with all the other attributes and reassign content to the new style) which is messy, time-consuming and ought to be unnecessary, but is possible. Thus, P3 seemed about right. Also, AFAIK, this is the only report of the problem - I did do a search - so it's not troubling many people (or they haven't noticed perhaps). - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 90408] a look onto the background tab in a paragraph/cell template changes back ground setting
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90408 User mike_hall changed the following: What|Old value |New value CC|'sba' |'mike_hall,sba' Ever confirmed| |1 Status|UNCONFIRMED |NEW Keywords| |oooqa Priority|P2|P3 --- Additional comments from [EMAIL PROTECTED] Tue Oct 28 21:34:28 + 2008 --- I can confirm that styles change as you describe (using m34). I cannot confirm that it is a regression. Open say Heading 2 style. Click on Organizer tab. Click on the Background tab. Click back on Organizer tab. 'white, transparent' is added to the style summary. The background of paragraphs to which Heading 2 has been applied do not change, however, inheritance is affected, because if you now change the background of the Linked with style (Heading) to say Blue, the background of other styles (eg Heading 1) linked to it are changed, but not the background of Heading 2 paragraphs. As one of the important benefits of OpenOffice is good style handling, this is a serious defect, but it does not seem to meet the criteria for P2. Setting P3. Suggest target to 3.1 or 3.2. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 90968] Scrolling with cells highl ighted causes rendering corruption
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90968 User mike_hall changed the following: What|Old value |New value Status|UNCONFIRMED |RESOLVED Resolution| |FIXED --- Additional comments from [EMAIL PROTECTED] Tue Oct 28 21:45:43 + 2008 --- Setting fixed as per text above and will also close. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 90968] Scrolling with cells highl ighted causes rendering corruption
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90968 User mike_hall changed the following: What|Old value |New value Status|RESOLVED |CLOSED --- Additional comments from [EMAIL PROTECTED] Tue Oct 28 21:46:18 + 2008 --- and closing... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 91335] OpenOffice workarea is not immune to system theme.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91335 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' Keywords| |needmoreinfo Priority|P2|P3 --- Additional comments from [EMAIL PROTECTED] Tue Oct 28 21:57:07 + 2008 --- Does this problem affect only OpenOffice of does it affect all applications? I can't test this on Linux, but on Windows although most appearance choices have a white document background, there are some that deliberately do not. If you choose one that has a non-white background, that's what you get. And you can selectively change that aspect anyway. Can you not do that on Linux? This does not seem to meet the criteria for P2. Setting P3. If all applications are working the same way, then it's not a defect at all, it's just a feature of the themes process on Linux. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 91557] Setting default file types via setup.xcu file doesnt work
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91557 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' Priority|P2|P3 --- Additional comments from [EMAIL PROTECTED] Tue Oct 28 23:54:48 + 2008 --- Suspect this is a support question rather than a defect. You might try the support forum, where I've seen this kind of thing discussed. It's possible the settings are now in common.xcu a couple of levels lower in the folder hierarchy, but I'm not sure of that. Does not seem to meet the criteria for P2. Setting P3. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 85147] Sort results in #REF field s
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85147 --- Additional comments from [EMAIL PROTECTED] Fri Oct 24 06:37:06 + 2008 --- Sorry, forgot to refer to the #REF. For the small 4 cell example, the sorted formula ending up in B2 refers to the row one above (as it did before sorting). If you move the four cells to the top right-hand corner and do the sort again, the formula ends up in B1 and the cell 'one above' is outside the grid, therefore #REF is correctly generated. This will happen to any formula when sorting moves a cell so that the relative position of the cells referred to in the formula are beyond the range of the sheet. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 85147] Sort results in #REF field s
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85147 --- Additional comments from [EMAIL PROTECTED] Fri Oct 24 06:40:07 + 2008 --- 'top right-hand' should of course be 'top left-hand' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 86027] XML Spreadsheet exports fr om Excel saved as .xls do not open correctly
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=86027 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' Status|UNCONFIRMED |RESOLVED Keywords| |oooqa Priority|P2|P3 Resolution| |INVALID --- Additional comments from [EMAIL PROTECTED] Fri Oct 24 08:18:46 + 2008 --- There is no possibility of OpenOffice 2.3.1 correctly opening an XML version of an Excel file because 2.3.1 was created before the Microsoft XML format was released. Please install 3.0, which does support opening XML files, and try again. There is no need to change the extension. Have set to P3 and invalid. If the problem persists with 3.0, please revert. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 86152] font color list border
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=86152 User mike_hall changed the following: What|Old value |New value Keywords| |oooqa Priority|P2|P3 --- Additional comments from [EMAIL PROTECTED] Fri Oct 24 09:03:38 + 2008 --- As per the forum, where good advice was given, what you seem to want is best managed by setting styles correctly (Format Styles and Formatting) and, if you need different settings from the standard, a default template. Setting as invalid, also as P3. If handling styles is new to you, and at first it often seems to be a difficult concept, see eg http://openoffice.blogs.com/openoffice/2005/12/all_about_style.html or for more do a Google search. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 86152] font color list border
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=86152 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 86152] font color list border
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=86152 User mike_hall changed the following: What|Old value |New value Status|UNCONFIRMED |RESOLVED Resolution| |INVALID --- Additional comments from [EMAIL PROTECTED] Fri Oct 24 09:06:13 + 2008 --- ... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 86939] File-Save on remote file fails after network outtage
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=86939 User mike_hall changed the following: What|Old value |New value Keywords| |needmoreinfo --- Additional comments from [EMAIL PROTECTED] Fri Oct 24 09:20:00 + 2008 --- I have seen behaviour probably like this. Does it occur with other apps (eg Word) or only with Writer? As there is no data loss (you can Save as) this is probably a P3, but leaving as P2 just now. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 86939] File-Save on remote file fails after network outtage
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=86939 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 90202] Calc Freezes when exportin g to XLS format
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90202 User mike_hall changed the following: What|Old value |New value CC|'daschmi' |'daschmi,mike_hall' Status|UNCONFIRMED |RESOLVED Resolution| |FIXED --- Additional comments from [EMAIL PROTECTED] Fri Oct 24 10:23:18 + 2008 --- Believe this has been fixed in later releases. Closing. Please revert if you don't agree. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 90202] Calc Freezes when exportin g to XLS format
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90202 User mike_hall changed the following: What|Old value |New value Status|RESOLVED |CLOSED --- Additional comments from [EMAIL PROTECTED] Fri Oct 24 10:23:51 + 2008 --- closing... - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 95216] WW8: content of certain gr aphic also imported for other graphics in docu ment
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95216 --- Additional comments from [EMAIL PROTECTED] Thu Oct 23 06:16:46 + 2008 --- Yes, understand this is the only example we have of a (hopefully) very small class of documents with the problem, but as it's data loss can we agree on P2? You are the best judge on its relative importance. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 85147] Sort results in #REF field s
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85147 User mike_hall changed the following: What|Old value |New value CC|'amy2008' |'amy2008,mike_hall' Status|UNCONFIRMED |RESOLVED Keywords| |oooqa Priority|P2|P3 Resolution| |INVALID --- Additional comments from [EMAIL PROTECTED] Thu Oct 23 22:19:48 + 2008 --- For the following four cells: A2: 2 B2: a A3: 1 B3: =B2 Sort these four cells on column A, and the formula in B3, now in B2, no longer points to the 'a' character, now in B3, instead it points to B1. Behaviour is the same in Calc and in Excel. In this case perhaps it's 'obvious' what you want, but maybe you can think of other scenarios where something different may be 'obvious'. For this situation, the 'solution' is to select and copy the cells in column C (for the first attachment spreadsheet), Click Paste Special, clear Paste all and Formulas and check Numbers and click OK. (This does the same as Paste Special Values in Excel, though it's not as intuitive.) You can then sort correctly. I realise that's not what you wanted to do, but AFAIK there isn't a way to do that. This is not a bug. Sort simply doesn't support what you want to do. If you wish to change this issue into a request for an enhancement, that's fine, but it will almost certainly need a lot of analysis to demonstrate that the change does what you want and what others might want, unambiguously, intuitively, without introducing unwanted side effects. I've set Invalid. Please revert if you don't agree. Also changed P2 to P3. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 84759] Can't search for email cli ent
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=84759 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' Status|UNCONFIRMED |RESOLVED Keywords| |oooqa Resolution| |WORKSFORME --- Additional comments from [EMAIL PROTECTED] Wed Oct 22 22:52:19 + 2008 --- Setting worksforme as presumably issue is resolved. If not, please revert. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 84805] Application fails to start - interface language cannot be determined
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=84805 User mike_hall changed the following: What|Old value |New value CC|'as,pavel'|'as,mike_hall,pavel' --- Additional comments from [EMAIL PROTECTED] Wed Oct 22 23:07:08 + 2008 --- To avoid the possibility of a Java conflict you can get an OpenOffice installation file without Java from: for 2.4.1 http://ftp.linux.cz/pub/localization/OpenOffice.org/devel/680/OOH680_m17/Build-1/ for 3.0 http://ftp.linux.cz/pub/localization/OpenOffice.org/devel/OOO300/OOO300_m9/Build-2/ Worksforme with Win XP SP3 and Java 1.6.0 using both 2.4.1 and 3.0. I've removed all other Java versions, but if you have more, you may need to select one with: Tools Options OpenOffice.org Java check Use a Java runtime, wait for the installed versions to appear and check one of them. Please try one or other of these methods and advise whether the problem is resolved. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 95216] WW8: content of certain gr aphic also imported for other graphics in docu ment
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95216 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Tue Oct 21 12:22:55 + 2008 --- added cc Weird. As it involves data loss (saving eg as odt or exporting as pdf gives the documents with the wrong pix) this is arguably a P2 and thus possibly a candidate for 3.1? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sc-issues] [Issue 85328] Formula in spreadsheet int erpreted as text
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85328 User mike_hall changed the following: What|Old value |New value CC|'troodon' |'mike_hall,troodon' Status|UNCONFIRMED |RESOLVED Keywords|needmoreinfo |oooqa Priority|P2|P3 Resolution| |WONTFIX --- Additional comments from [EMAIL PROTECTED] Mon Oct 20 22:55:37 + 2008 --- Tested with 3.0 Suspect the reason the formula was left as lower case by Excel is that it's uncomputable (average counts the number of numbers, and there are 0 numbers in your range). If you change the range to include any number (eg a1:b77 the formula works immediately. If you type a number in the existing range and then in the formula in A78 type any character, remove it and then press Return the formula also works. If you type in the same formula to any other cell, you get the Divide by zero warning, which is correct (no numbers in the range). Therefore the defect is not recognising as a formula a string which Excel refused to convert into a formula. I doubt this is P2 and it might be considered more an enhancement than a bug. Tested with Excel 2002. Average over a blank set of cells is correctly recognised and gives the Divide by zero warning. Thus the problem probably arises because of the application which originally wrote the XLS file, which may not have been Excel - it's a bug there not really in Calc. Changing to P3 and setting wontfix because it's a rather unlikely situation. Please revert if you don't agree. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 95015] Print range is silently so rted before printing
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95015 --- Additional comments from [EMAIL PROTECTED] Fri Oct 17 22:27:24 + 2008 --- Many printers have a setting to print pages in reverse order (Print Properties and select reverse page order - details differ between printers). Is this available on your printer? This is probably not a bug. If above does not work for you, then it perhaps might be changed into an enhancement request. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 95015] Print range is silently so rted before printing
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=95015 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Fri Oct 17 22:28:23 + 2008 --- oops, forgot cc - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 90936] WRITER fails to undo autom atically created hyperlink in expected order
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=90936 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Tue Oct 7 13:03:07 + 2008 --- Shift+Enter (line break) also works as it should, hyperlink is undone first - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 94742] Writer fails to create a h yperlink on insert manual column or page break
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=94742 Issue #|94742 Summary|Writer fails to create a hyperlink on insert manual co |lumn or page break Component|Word processor Version|OOO300m8 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|ENHANCEMENT Priority|P4 Subcomponent|editing Assigned to|mru Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Tue Oct 7 13:14:02 + 2008 --- With the cursor positioned at the end of a string like www.a.b, Newline, Line break and space all create a hyperlink. Manual column and page breaks do not. For consistency, probably they should? Low priority but possibly worth considering if working in this code area. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 94743] changedby note incorrectly appears on opening html document
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=94743 User mike_hall changed the following: What|Old value |New value Keywords| |oooqa, regression --- Additional comments from [EMAIL PROTECTED] Tue Oct 7 13:37:12 + 2008 --- It's possibly not strictly a regression, as the notes facility is new, but you might not expect the average user to understand that. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 85705] Better support of notes in HTML
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=85705 User mike_hall changed the following: What|Old value |New value CC|'mba' |'mba,mike_hall' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[xml-issues] [Issue 44257] Save metadata in html/xhtm l files using Dublin Core
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=44257 User mike_hall changed the following: What|Old value |New value CC|'gdick,sus' |'gdick,mike_hall,sus' --- Additional comments from [EMAIL PROTECTED] Tue Oct 7 13:42:25 + 2008 --- Please also see related issues: http://www.openoffice.org/issues/show_bug.cgi?id=58763 http://www.openoffice.org/issues/show_bug.cgi?id=85705 http://www.openoffice.org/issues/show_bug.cgi?id=94743 Added in case these other closely related issues can be resolved at the same time, possibly with very little extra effort. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 94743] changedby note incorrectly appears on opening html document
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=94743 Issue #|94743 Summary|changedby note incorrectly appears on opening html doc |ument Component|Word processor Version|OOO300m8 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|open-import Assigned to|mru Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Tue Oct 7 13:35:19 + 2008 --- Save any document as html. Close. Reopen. A note always appears, saying CHANGEDBY even though no changes have been made. At this point, Save is greyed out. Do FileSave as, save, close and reopen to generate as many such notes as you like without changing the document. Some thought needs to be given to not generating multiple Meta tags! See also #85705, #44257, #58763 This is a candidate for 3.0.1 or 3.1 I think. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 46165] Regular expressions work i nconsistently or not at all when combined.
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=46165 User mike_hall changed the following: What|Old value |New value CC|'cornouws,dowdenan,drking,|'cornouws,dowdenan,drking, |huw,kpalagin,sba' |huw,kpalagin,mike_hall,sba | |' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 91869] Patch: Completing the miss ing implementation of the Vista file dialog
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=91869 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 28526] Allow anti-aliasing of dra wing objects
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=28526 User mike_hall changed the following: What|Old value |New value CC|'asrail,aw,cyhawk,hcostelh|'asrail,aw,cyhawk,hcostelh |a,iha,jbfaure,kamataki,mas|a,iha,jbfaure,kamataki,mas |ayan,mbardac,mod,mouse256,|ayan,mbardac,mike_hall,mod |norbert2,pagalmes,pmike,sf|,mouse256,norbert2,pagalme |orbes,thb,thing,utomo99' |s,pmike,sforbes,thb,thing, | |utomo99' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 93691] format painter tool tip is poor English
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93691 Issue #|93691 Summary|format painter tool tip is poor English Component|Word processor Version|OOO300m5 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|ui Assigned to|mru Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Tue Sep 9 21:57:28 + 2008 --- HelpWhat's thishover over Format Painter The current tool tip is: First select a text (in Writer) or an object, then click this icon. Now click another text (in Writer) or another object to apply the same formatting. This is not good English. Suggest instead: First select some text (in Writer) or an object, then click this icon. Then click and drag over other text (in Writer) or click an object to apply the same formatting. Or, even better, why is (in Writer) there? Nothing like that is there for the other tool tips. So, even better text could be: First select some text or an object, then click this icon. Then click and drag over other text or click an object to apply the same formatting. Believe this is a defect rather than an enhancement because the English is clearly wrong at present. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 93577] duplicate error message if recent file not found
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93577 User mike_hall changed the following: What|Old value |New value Target milestone|--- |OOo 3.0.1 --- Additional comments from [EMAIL PROTECTED] Tue Sep 9 22:03:51 + 2008 --- Same duplicate error message issue occurs if the default template can't be found on Office startup (happens eg if a network connection to the template directory fails). I'm setting a target of 3.0.1 as it's probably not important enough to delay 3.0, but it does make the interface look rather unprofessional. No doubt someone will change it! - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 93577] duplicate error message if recent file not found
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93577 User mike_hall changed the following: What|Old value |New value Keywords| |regression --- Additional comments from [EMAIL PROTECTED] Mon Sep 8 06:06:55 + 2008 --- Yes, it is a regression compared with 2.4.1 on both XP and Vista - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 93577] duplicate error message if recent file not found
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93577 Issue #|93577 Summary|duplicate error message if recent file not found Component|framework Version|OOO300m5 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|ui Assigned to|tm Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Sun Sep 7 22:03:09 + 2008 --- Create a new document. Delete document in Windows Explorer or otherwise. Click link to document in recent file list. You get an error message that the file can't be found. When you click OK, you get the same message again. Not sure if this is a regression, and it probably isn't new in m5 (Pavel's build) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 93299] 16 bit tifs have red colou r cast
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93299 Issue #|93299 Summary|16 bit tifs have red colour cast Component|framework Version|OOO300m3 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|ui Assigned to|tm Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Sun Aug 31 17:03:32 + 2008 --- Open any OOo application, eg Impress Create a blank presentation Insert Picture from file select uncompressed or lzw compressed tif images saved from Photoshop with image mode set to 16 bits/channel Images open, but with a strong red cast. Images are here: http://www.onepoyle.net/tifs/file_format_comparison_unco16.tif http://www.onepoyle.net/tifs/file_format_comparison_lzw16.tif Formats should either be refused as unrecognised or, better, they should open correctly. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 93300] 32 bit tifs crash open off ice
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93300 Issue #|93300 Summary|32 bit tifs crash open office Component|framework Version|OOO300m3 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|ui Assigned to|tm Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Sun Aug 31 17:06:21 + 2008 --- Open any OOo application, eg Impress Create a blank presentation Insert Picture from file select uncompressed or lzw compressed tif images saved from Photoshop with image mode set to 32 bits/channel OpenOffice crashes as soon as you click OK. Images are here: http://www.onepoyle.net/tifs/file_format_comparison_unco32.tif http://www.onepoyle.net/tifs/file_format_comparison_lzw32.tif Formats should either be refused as unrecognised or, better, they should open correctly. OpenOffice should not crash. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 93172] Impress: Images do not ope n
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93172 Issue #|93172 Summary|Impress: Images do not open Component|Presentation Version|DEV300m30 Platform|Unknown URL| OS/Version|All Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|open-import Assigned to|wg Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Wed Aug 27 11:01:08 + 2008 --- Impress object with several large images. Opens fine in OOO300_m3. In DEV300m30 the first image on the first slide displays quickly, but the second on the same slide and all other images in the file do not display. Didn't find a way to make them appear. The object showing the problem is here: http://www.onepoyle.net/photo/doc/pixelation.odp - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[graphics-issues] [Issue 93172] Impress: Images do not ope n
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=93172 User mike_hall changed the following: What|Old value |New value Keywords| |regression - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 88626] tools customize save in do es not display full document name
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88626 User mike_hall changed the following: What|Old value |New value Status|NEW |RESOLVED Resolution| |FIXED --- Additional comments from [EMAIL PROTECTED] Tue Aug 19 11:06:48 + 2008 --- has been fixed by 3.0 m3 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 92927] Incorrect styles do not ma tch message
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92927 Issue #|92927 Summary|Incorrect styles do not match message Component|Word processor Version|OOO300m3 Platform|Unknown URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|open-import Assigned to|mru Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Tue Aug 19 20:16:01 + 2008 --- Setup with default template set as the default template and that path the only template path. This may well affect all apps, but have only tested with Writer. Do File New put in any text Save and close document Reopen - get incorrect message that 'styles in this document do not match current styles...' Believe this has been there for a several versions, but have only just realised it's a bug. Believe it's a stopper for 3.0 - will add to 88 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 92927] Incorrect styles do not ma tch message
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=92927 --- Additional comments from [EMAIL PROTECTED] Tue Aug 19 20:20:21 + 2008 --- Start of text should have read: Setup with default template set to a template on a server and that path the only template path. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 64507] Hyphens with leading space in justified text (screen only)
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=64507 --- Additional comments from [EMAIL PROTECTED] Tue Jul 15 11:39:27 + 2008 --- FWIW, checked with my attachment on 4 PCs with various versions from 2.4.1 to 300_m3 with XP and Vista. Can still see the same small effect on the 3 high quality screens at various zooms. line 2 is OK, line 5 is not. The one where I can't see the effect is a portable with a rather poor screen. It's marginal. Suggest 'won't fix' rather than spend more valuable time on it? --- Additional comments from [EMAIL PROTECTED] Tue Jul 15 11:39:37 + 2008 --- FWIW, checked with my attachment on 4 PCs with various versions from 2.4.1 to 300_m3 with XP and Vista. Can still see the same small effect on the 3 high quality screens at various zooms. line 2 is OK, line 5 is not. The one where I can't see the effect is a portable with a rather poor screen. It's marginal. Suggest 'won't fix' rather than spend more valuable time on it? --- Additional comments from [EMAIL PROTECTED] Tue Jul 15 11:40:55 + 2008 --- FWIW, checked with my attachment on 4 PCs with various versions from 2.4.1 to 300_m3 with XP and Vista. Can still see the same small effect on the 3 high quality screens at various zooms. line 2 is OK, line 5 is not. The one where I can't see the effect is a portable with a rather poor screen. It's marginal. Suggest 'won't fix' rather than spend more valuable time on it? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 19816] auto-adjust white spaces w hen drag'n dropping text is good but needs twe aking to consider (),. and so on
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=19816 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Fri Jun 27 11:10:20 + 2008 --- Drag and drop is a bit of a mess, eg select some text with no surrounding white space, drag and drop is OK. Click undo and the selection will include a leading space. Drag and drop again, and unless you are careful, white space does not adjust as it did the first time. Similarly, select any text including a starting or trailing space, white space does not adjust intuitively. I can understand why it has been implemented this way, but it's not the behaviour most users probably want. Maybe we need an option setting, someone probably depends on it as it is! Intuitive drag and drop is almost the first thing you might want to get right for a word processor. Will suggest in ux-discuss that this is targeted for 3.1. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 88626] tools customize save in do es not display full document name
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88626 --- Additional comments from [EMAIL PROTECTED] Thu May 15 22:31:54 + 2008 --- Possibly the description is not clear. The main point is that saving customisation settings in a new document is made more difficult because the full document names for untitled documents are not shown. As it's a regression, it probably needs a target milestone of 3.0. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88205] Replace by 'Custom Quotes' does not work
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88205 --- Additional comments from [EMAIL PROTECTED] Tue Apr 22 09:33:45 + 2008 --- Still works for me with m9 (Pavel's build, Eng - US), including setting DE quotes etc. This is on my desktop. Will try later on a portable. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88205] Replace by 'Custom Quotes' does not work
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88205 --- Additional comments from [EMAIL PROTECTED] Tue Apr 22 13:41:09 + 2008 --- Also works for me after new install of m9 on my portable. Don't think I can do any more until you find out why your desktop is different. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 88626] tools customize save in do es not display full document name
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88626 Issue #|88626 Summary|tools customize save in does not display full document | name Component|framework Version|DEV300m9 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|ui Assigned to|tm Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Wed Apr 23 05:27:24 + 2008 --- Open two new documents (untitled1; untitled2) Do Tools Customize and click the selection arrow for Save in. The two open documents are both called untitled (no numeric) Regression, works correctly in 2.4.0 - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 88626] tools customize save in do es not display full document name
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88626 User mike_hall changed the following: What|Old value |New value Keywords| |oooqa, regression - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88457] Save file properties not s et
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88457 --- Additional comments from [EMAIL PROTECTED] Mon Apr 21 08:03:09 + 2008 --- @brooksg I am almost certain that OOo is working correctly. In the dialogue box when you save a new document, is the box 'Automatic file name extension' checked? If it is not, Writer will (correctly) save the file without the file extension, which will lead to the situation you describe. The file extension is what Windows uses to determine what kind of a file it is, and I'm guessing you may have unknowingly turned off that property setting. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[installation-issues] [Issue 88479] snapshot version includes java even though it says it doesn't
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88479 User mike_hall changed the following: What|Old value |New value Status|RESOLVED |REOPENED Resolution|WORKSFORME| --- Additional comments from [EMAIL PROTECTED] Mon Apr 21 20:19:14 + 2008 --- OK, have looked at i80089. The advantages are arguable both ways and I would guess the majority might prefer 'without'. As with the released build, some will prefer with and some without. How much effort would it be to post both? Those who strongly prefer 'without' can use Pavel's builds but thus we won't be testing the official snapshots. The snapshot page says that the snapshots are without Java and even gives the without Java file size. That's pretty confusing. I'm reopening because the text on the snapshots page clearly needs to be corrected if the build is to remain 'with'. This issue has been reassigned to me, but I can't do anything with it. To whom can it be reassigned. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88504] linebreak before closing b racket
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88504 --- Additional comments from [EMAIL PROTECTED] Mon Apr 21 20:49:22 + 2008 --- Please attach a document which demonstrates the problem. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88504] linebreak before closing b racket
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88504 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88457] Save file properties not s et
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88457 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Sat Apr 19 09:57:33 + 2008 --- Works for me on 2.4.1 and DEV300_m6 under Win XP. Have you selected the ODF Text Document Template by mistake? Do other selections of Files of Type work? - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88448] Fixed field ... not fixed
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88448 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' Ever confirmed| |1 Status|UNCONFIRMED |NEW --- Additional comments from [EMAIL PROTECTED] Sat Apr 19 10:15:23 + 2008 --- Under 2.4.0 the 'fixed' status of an info field is cleared when a document is saved, closed and reopened. DEV300_m6 (3.0 beta) works OK. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88448] Fixed field ... not fixed
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88448 User mike_hall changed the following: What|Old value |New value Keywords| |oooqa - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88457] Save file properties not s et
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88457 --- Additional comments from [EMAIL PROTECTED] Sat Apr 19 10:17:09 + 2008 --- for 2.4.1 read 2.4.0 - sorry - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88281] Non limited search info di alogs when repeating search from the navigatio n bar - crash
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88281 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Sat Apr 19 10:23:55 + 2008 --- set self as cc, also for 2.4.1 read 2.4.0, sorry - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[framework-issues] [Issue 88479] snapshot version includes java even though it says it doesn't
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88479 Issue #|88479 Summary|snapshot version includes java even though it says it |doesn't Component|framework Version|DEV300m9 Platform|PC URL| OS/Version|Windows XP Status|NEW Status whiteboard| Keywords| Resolution| Issue type|DEFECT Priority|P3 Subcomponent|scripting Assigned to|ab Reported by|mike_hall --- Additional comments from [EMAIL PROTECTED] Sat Apr 19 18:48:51 + 2008 --- The snapshot build includes Java (it's 139Mb, not the 120Mb stated on the snapshot page). Same thing happened with m7. I got into a mess with Java versions as a result of m7 snapshot. It would be nice to have the advertised non-Java build. Pavel has not built Windows versions of m9. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88277] Graphics are not shown fro m a imported html file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88277 User mike_hall changed the following: What|Old value |New value Status|UNCONFIRMED |RESOLVED Resolution| |INVALID --- Additional comments from [EMAIL PROTECTED] Thu Apr 17 06:15:27 + 2008 --- Ah! Many apologies - must have been having a bad day. My base... tag is nonsense. The problem is that a base tag needs a full URL, it's not legal to do what we were trying to do. If you replace the base tag with (eg) base href=http://www.onepoyle.net/images/; then everything works. Things are slightly confused by what Writer does. If you make any change to a document, it adds the base URL to all img tags and removes the base tag. It was doing that to all our examples as well, but as there wasn't a valid URL in any of the base tags we supplied, there was nothing to add, and as the images were in the same directory, that fixed the problem. Apologies for misleading you. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88277] Graphics are not shown fro m a imported html file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88277 --- Additional comments from [EMAIL PROTECTED] Thu Apr 17 06:31:07 + 2008 --- ... I think the fact that browsers like Firefox accept the relative base... tag and do work is a different issue. They are just being kind to you. If you want Writer to work the same way, that would need the creation of an enhancement issue. Although on the face of it not an unreasonable request, there might well be opposition to making Writer support non-legal HTML. (That's if I have understood it correctly and the relative tag is not legal.) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88277] Graphics are not shown fro m a imported html file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88277 --- Additional comments from [EMAIL PROTECTED] Wed Apr 16 08:45:41 + 2008 --- Created an attachment (id=52847) this document with base tag loads OK - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88277] Graphics are not shown fro m a imported html file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88277 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Wed Apr 16 08:46:17 + 2008 --- added self as cc - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88277] Graphics are not shown fro m a imported html file
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88277 --- Additional comments from [EMAIL PROTECTED] Wed Apr 16 08:43:39 + 2008 --- There does seem to be a problem with this document. If you make any change, save, close and reload, the problem goes away. However, the problem is not simply that of removing the base tag (though this is the effect of the edit and save). Other html documents with the same base tag load fine. I will add an example, using the same graphic. Please can you provide the simplest possible example of an html file which shows this problem so the cause can be more easily determined. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88301] autocorrect replace field , no display if space
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88301 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Wed Apr 16 13:59:22 + 2008 --- Works for me on 2.4.1 and DEV300_m6. Where are you looking at the search and replace terms? In certain circumstances you may find that the box at the top which you use to create and edit entries has got part of a previously created entry, which might look like what you described, but, for me, the entries lower down in the alphabetical list are all fine. Please reconfirm that it is the entry in the alphabetical list that is displaying wrongly. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88205] Replace by 'Custom Quotes' does not work
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88205 User mike_hall changed the following: What|Old value |New value CC|''|'mike_hall' --- Additional comments from [EMAIL PROTECTED] Wed Apr 16 14:07:01 + 2008 --- Works for me in DEV300_m6. Please confirm that on the 'Options' tab in ToolsAutocorrect that Replace standard quotes with custom quotes is checked. - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
[sw-issues] [Issue 88301] autocorrect replace field , no display if space
To comment on the following update, log in, then open the issue: http://www.openoffice.org/issues/show_bug.cgi?id=88301 --- Additional comments from [EMAIL PROTECTED] Wed Apr 16 17:37:14 + 2008 --- @aadvark12 I used the accented variety, Win XP. Was replacing dejavu rather than deja, but have now tried both. As yours therefore, except that I haven't deleted all the other entries. Cannot recreate in either of the OOo versions mentioned. Entry is still there if I close Writer and restart. Are you entering ToolsAutocorrect with the same language (see top of dialogue box)? (If you create the entry in English (UK) but come in from a document formatted as language English (USA), the entry will appear to have disappeared. Select the language you created the entry in, and see whether or not it is there.) - Please do not reply to this automatically generated notification from Issue Tracker. Please log onto the website and enter your comments. http://qa.openoffice.org/issue_handling/project_issues.html#notification - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED] - To unsubscribe, e-mail: [EMAIL PROTECTED] For additional commands, e-mail: [EMAIL PROTECTED]
