Re: Admin distance on directly connected
They are, but they still has AD of 1. It can easily be proved. Just enter 'debug ip routing' before you add static route pointing to interface, and you will see that it will be added into routing table with AD of 1. Sasa > > Those routes are treated like directly-connected interfaces... > > Brant I. Stevens > Internetwork Solutions Engineer > Thrupoint, Inc. > 545 Fifth Avenue, 14th Floor > New York, NY. 10017 > 646-562-6540 > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Sasa Milic > Sent: Friday, February 02, 2001 5:49 PM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: Re: Admin distance on directly connected > > > > > > A directly connected network has an AD=0. > > A static route via Interface has AD=0 > > A static route via IP address has AD=1 Correct? > > A static route via interface cannot have AD of 0. > It can have AD from 1 (default) to 255, just like > any other static route. > > Sasa > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP Preparation or Certification Library ???
Hi Arthur, That mean if I want to start preparing myself for CCNP which one is better to get full understanding the CCNP more than the other one? the Cisco CCNP Preparation Library??? OR the Cisco CCNP Certification Library??? Regards, Magdy MCSE, CCNA ""Arthur Simplina"" <[EMAIL PROTECTED]> wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > The CCNP Preparation Library(ISBN 1587050137) consists of 4 coursebooks: > BSCN > BCMSN > BCRAN > CIT > > The CCNP Certification Library (ISBN 1587200376) consists of 4 exam > Certification Guides as above each with CD-ROM test engines. These > certification guides complement the coursebooks. > > For now I got the BSCN and I am very satisfied with the contents. My order > for the BSCN Exam Certification Guide has not yet arrived. > > The BSCN book is the reference book for the Cisco Network Academy 5th > semester course. > > Cheers, > > Art > > > >From: Leonardo Pereira <[EMAIL PROTECTED]> > >Reply-To: Leonardo Pereira <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: CCNP Preparation or Certification Library ??? > >Date: Thu, 01 Feb 2001 17:21:30 -0300 > > > >Dear Friends, > > > >I have found two options at Cisco Press´s Site to prepare for my CCNP > >Exams. The options are: > > > >Cisco CCNP Preparation Library > >Cisco CCNP Certification Library > > > >Has anyone heard anything about these books ??? Which one is the best > >??? > > > >Thanks for your help. > > > >Leo, > >Rio, Brazil. > > > >_ > >FAQ, list archives, and subscription info: > >http://www.groupstudy.com/list/cisco.html > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > Get your FREE download of MSN Explorer at http://explorer.msn.com > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Which BCMSN Cisco book?
yes, this one should be ok . Good luck with your test. "Terry" <[EMAIL PROTECTED]> wrote in message 95g36a$i3n$[EMAIL PROTECTED]">news:95g36a$i3n$[EMAIL PROTECTED]... > Trying to decide which book to get for the switching test. Anyone out there > compared them both? > > Building Cisco Multilayer Switched Networks > > Hardcover - 500 pages 1st edition (May 15, 2000) > Cisco Pr; ISBN: 1578700930 ; Dimensions (in inches): 1.40 x 9.47 x 7.70 > > - or - > > Cisco Ccnp Switching Exam Certification Guide > Hardcover - 576 pages Bk&Cd-Rom edition (December 20, 2000) > Cisco Systems; ISBN: 158727 ; Dimensions (in inches): 1.50 x 9.43 x 7.71 > > Thanks > > Terry > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: System Flash Read Only
Hi Hans, The flash in the 2500 always said read-only. This platform runs the IOS from flash, therefore when the router is running the flash is read-only as not to write over the IOS. There is a boot helper mode (config register 0x2101) which you can go to, to change the IOS image. Rich On Feb 2, 11:37pm, Hans Stout chatted about: > Subject:System Flash Read Only > Hi colleagues, > > I just installed some third party flash memory into my 2501, and the 'sh > ver' says that the system flash is read only. How can I change that to > read/write ? Is that a configuration register setting ? Or a jumper setting > ? > Thanks for your advice in advance. > > Regards, > > Hans > _ > Get Your Private, Free E-mail from MSN Hotmail at http://www.hotmail.com. > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] >-- End of waffle from Hans Stout -- *** Please copy your emails to [EMAIL PROTECTED] *** #---# #.. ..| Richard Gallagher | Office:+32 2 704 5000 # #|| ||| Euro-CATS | Direct:+32 2 704 5421 # #|| ||| Cisco Systems Belgium | Fax: +32 2 704 6000 # # | Pegasus Park | email: [EMAIL PROTECTED] # #.:||:.:||:.| De Kleetlaan, 6A | # # Cisco Systems | BE 1831 Diegem| http://www.cisco.com/tac # #---# "Normal people believe that if it ain't broke, don't fix it. Engineers believe that if it ain't broke, it doesn't have enough features yet." Check out this link: http://www.cisco.com/warp/customer/63/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Configuring Bay router loopback
Don't forget that you may have another excellent configuration tool at your fingertips - the BCC (Bay Command Console), despite its relative immaturity compared to Site Mangler, is light-years ahead in terms of speed and reliability. If you have BayRS version 12.20 or higher running on your router, just type "bcc" at the TI prompt and press enter. Once the BCC launches (it takes a second or two to load), enter config mode by typing "config." Change to the global IP object by entering the "ip" command, then you can configure a virtual interface simply by entering "virtual," then entering an IP address. I'm doing all this from memory as I write this, so it may be a little off: bcc> config box# ip ip# virtual virtual# ip w.x.y.z /mask all done. Not too many people know about the BCC. IMO, Bay did a fabulous job in creating it, but a lousy job marketing and including it in their training courses. When I worked for Bay's Educational Services, I made sure to cover the BCC in every course I taught. Not every instructor got as excited about the BCC as I did...I still don't know why. It rocks! :-) BJ - Original Message - From: Brian Lodwick To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] Sent: Friday, February 02, 2001 8:14 PM Subject: Re: Configuring Bay router loopback Thanks Howard, I found something tried it, but we couldn't get it to work. Here are the commands we tried: Starting IP on the Circuitless Interface To configure a circuitless IP interface, begin at the Configuration Manager window and proceed as follows: 1. Select Protocols > IP > Circuitless IP > Create to display the IP Configuration window. 2. Edit the parameters on the IP Configuration window. 3. Click on OK to save the circuitless IP interface. A special Select Protocols window opens, listing the protocols you can configure on a circuitless interface. 4. Select a protocol and click on OK. >>>Brian >From: "Howard C. Berkowitz" <[EMAIL PROTECTED]> >Reply-To: "Howard C. Berkowitz" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: Configuring Bay router loopback >Date: Fri, 2 Feb 2001 18:18:02 -0500 > > >Anybody know how to configure a loopback interface on a Bay router? > > > Brian > >_ > > > >Look under "circuitless interface". That's the Bay RS equivalent to >Cisco's "loopback interface." > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Exam 640-443 preparation suggestions
I am interested in starting a dialog about the Managing Cisco Routed Internetworks exam 640-443. I would be interested in the finding out what study material the group has found beneficial. I have looked at www.cisco.com, I am looking for suggestions on good books or articles. Thanks, Greg St. Martin [EMAIL PROTECTED] __ Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: "neighbor" command in eigrp router
Well done. I believe this is a good solution for an extremely perplexing problem on one of our customer's Campus BB's. In short, there are 40 FDDI-connected routers, running eigrp, with 3 acting as "gateways" to the rest of the enterprise network. Quiescing neighbor-state changes there has been very tough. I tested it this morning in the lab - successfully. It ain't complicated, but elegant in simplicity. Trying to get it in on expedited change control for Monday or Tuesday night. This ain't the first time you fine people have provided working solutions to real life problems in the 30-something customer accounts I have a hand in managing. I may have even gotten lucky a couple times in providing something I pulled out of my--uhhh---tailpipe. So, here's an idea: "T-Shoot, your problem's secret weapon" - "T-shoot, Inc., Ltd" Anyone wanting in chips-in a grand (completely arbitrary figure). Somebody comes to the T-shoot well with some heinous problem. "Let's see, on our schedule of issues, that's a $100 problem. Pay up." The T-shoot-ers staff the problem, work the issue through a lab provided for this purpose, and one or more solutions are offered, guaranteed to never rust, bust or ever get dusty. Rainman remert wrote: > neighbor ip-address defines a unicast address to which RIP, IGRP or EIGRP routing >update should be > send. > Consider this situation. You have three routers on ethernet A,B,C. You want EIGRP >beetween A and B, > and beetween B and C but not beetwen A and C. > You could accomplish this with passive interface command on A and C and neighbor >command with B ip > address on A and C. > > [EMAIL PROTECTED] wrote: > > > > Hello > > I found the "neighbor" option in my routers under "router eigrp..." but i > > found no info on what that might do > > Does anybody know ? > > > > --- > > Gabriel Neagoe, GN379-RIPE > > Networking solutions consultant > > Cisco Certified Network Professional > > Cisco Certified Design Associate > > S&T Romania > > tel: +401 20 40 300 > > fax: +401 20 40 310 > > --- > > > > _ > > FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cvoice
Hi, can anyone tell me is it necessary to pass the ccnp certification in = order to take the cvoice 2.0 exam. i have checked with the cisco website = and only acrc (or bscn ) and ccna are written in the prequisites. a = friend of mine was telling me that you can appear for the exam but wont = get the certificate before passing the whole of ccnp , is it true.? regards, umer=20 [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Switch Acceleration on 4006
Anyone done this before... asking because I was thinking about it but I'm not sure if it will hose my GB EtherChannel on 1/1-2? Jeff _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Switch Acceleration on 4006
Hi Jeff, It depends on the configuration that you use. Have a look at the following link for more details: http://www.cisco.com/univercd/cc/td/doc/product/lan/cat5000/rel_5_5/sw_cfg/swacc.htm Rich On Feb 3, 6:16pm, Jeff Duchin chatted about: > Subject:Switch Acceleration on 4006 > Anyone done this before... asking because I was thinking about it but I'm > not sure if it will hose my GB EtherChannel on 1/1-2? > > Jeff > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] >-- End of waffle from Jeff Duchin -- *** Please copy your emails to [EMAIL PROTECTED] *** #---# #.. ..| Richard Gallagher | Office:+32 2 704 5000 # #|| ||| Euro-CATS | Direct:+32 2 704 5421 # #|| ||| Cisco Systems Belgium | Fax: +32 2 704 6000 # # | Pegasus Park | email: [EMAIL PROTECTED] # #.:||:.:||:.| De Kleetlaan, 6A | # # Cisco Systems | BE 1831 Diegem| http://www.cisco.com/tac # #---# "Normal people believe that if it ain't broke, don't fix it. Engineers believe that if it ain't broke, it doesn't have enough features yet." Check out this link: http://www.cisco.com/warp/customer/63/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help me Urgent all CCIES please !!!!!!!!!!!!!!!
Hi there , I am having trouble getting answers for these questions could you please help me planing to take exam day after please help me out 1.ip datagram contain which of the following a,arp packet b,bits icmp messages udp,tcp data 2. difference between tacas & tacas+ 3.in dlsw environment when all route explorer sent between dlsw peers how it will be sent a directed broadcast b explorer frame etc 4 in x.25 environment if frame error occurs which one will reset connection There is diagram two routers separated by serial link both ends one host at each end A, Router or Host 5 same as above but protocol is HDLC in this situation what will happen 6 what is result of sending a loop up signal to csu/dsu? 7 what lane resolution protocol do all nw protocols address to nsap ip address to nsap etc 8 nlsp & is-is link sate or distance vector 9 when bridge receive a frame how it will be forwarded to all ports or except disabled ports it will forward to all ports 10 when tacas does not contain user account what it wiil do 11 frames are unable to transmit from router though serial link what happen output error connection reset etc 12 characteristics of 4B/5B encoding in fddi 13 what is meant by tcp slow start 14 tacas+ has what advantages over tacas? waitning for your reply Regards, sun _ Chat with your friends as soon as they come online. Get Rediff Bol at http://bol.rediff.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Blocking LSA Type 4 and 5's
That's kindof the conclusion I have come across too, that OSPF just isn't designed to be able to do this selectively. Obviously blocking LSA type 1's or 2's within an area would directly violate the RFC since ever Router's link state database in a certain area has to match, and given that you redistribute into the OSPF process itself and not into a given area it makes sense that barring certain exceptions such as stub areas an ASBR will always send the LSA 5's into every connected area. Here's a slightly different question though for anyone. Could an ABR that is connected to a stub area (not an NSSA area) be an ASBR? In other words, does the fact that the router is a backbone router and possibly connected to other areas as well make it exempt from the rule that you can have no ASBRs in a stub area? In this situation would the router just not advertise it's type 4 and 5 LSAs into that particular area? At 11:52 AM 2/2/01 -0500, you wrote: >So you are talking about a topology where you have an ASBR that also >borders Area 0 and is thus also an ABR by definition. > >The question is then, "can I control which external prefixes enter the >rest of the ospf domain as type 5 LSA's" I would have to say that you >cannot by definition restrict the flow of LSA's in an OSPF domain beyond >turning down interfaces. You can decide which area's will recieve Type >3/4/5/7/10 etc by the use of stub areas and their variants and you can >also minimize prefix flow's by summarizing at borders. However, there is >no way to my knowledge that you can instruct a ABR to advertise some but >not all type 5's into an area. > >Route filtering in OSPF is somewhat of a misnomer in my opinion. Since >link state protocols do not advertise their routing table, but instead >their link state database, the concept of prefix filtering within an OSPF >domain is out of place. In fact, filting LSA's of any kind within an area >directly violates the RFC in that all routers in an Area MUST maintain >identical copies of the area topology. However, filtering type 5's at the >ABR, to me, has some merits. I may be missing something here and Howard >will likely point it out if I am. But in summary, there is no >"distribute-list" type command that allows you to restrict the flow of >LSA's within an OSPF domain. > >Naturally I'm sure your aware that you can filter prefixes like mad when >dealing with redistribution into or out of OSPF. > >HTH > >-pete > > >*** REPLY SEPARATOR *** > >On 2/2/2001 at 7:48 AM Curtis Call wrote: > > >Anything, but to make it simple lets just say we're trying to redistribute > >static routes. > > > >At 08:41 AM 2/2/01 -0500, you wrote: > >>Redistribute what? > >> > >> > >>*** REPLY SEPARATOR *** > >> > >>On 2/1/2001 at 8:02 PM Curtis Call wrote: > >> > >> >There's something that I'm curious about dealing with OSPF ASBRs. Let's > >> >say your ASBR is also an ABR that is bordering area 0 and area 1. Is > there > >> >a way that you could specify to only redistribute into area 1 or by > nature > >> >of being an ASBR does a router have to advertise the route to every > area to > >> >which it is connected (assuming all areas are normal non-stub areas). > >> > > >> >_ > >> >FAQ, list archives, and subscription info: > >> http://www.groupstudy.com/list/cisco.html > >> >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >> > >> > >> > >>_ > >>FAQ, list archives, and subscription info: > >>http://www.groupstudy.com/list/cisco.html > >>Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > >_ > >FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help me Urgent all CCIES please !!!!!!!!!!!!!!!
Sounds like you may want to postpone that test, my friend. I personally believe that one of the biggest problems with our industry is paper certs. Do us all a favor and KNOW the material before you pass the exam. Just my two cents. Christopher Supino CCNA, MCSE, CNA 5, ASE Senior Systems Engineer TransNet Corp. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ravi N Varma Sent: Saturday, February 03, 2001 12:53 PM To: [EMAIL PROTECTED] Subject: Help me Urgent all CCIES please !!! Hi there , I am having trouble getting answers for these questions could you please help me planing to take exam day after please help me out 1.ip datagram contain which of the following a,arp packet b,bits icmp messages udp,tcp data 2. difference between tacas & tacas+ 3.in dlsw environment when all route explorer sent between dlsw peers how it will be sent a directed broadcast b explorer frame etc 4 in x.25 environment if frame error occurs which one will reset connection There is diagram two routers separated by serial link both ends one host at each end A, Router or Host 5 same as above but protocol is HDLC in this situation what will happen 6 what is result of sending a loop up signal to csu/dsu? 7 what lane resolution protocol do all nw protocols address to nsap ip address to nsap etc 8 nlsp & is-is link sate or distance vector 9 when bridge receive a frame how it will be forwarded to all ports or except disabled ports it will forward to all ports 10 when tacas does not contain user account what it wiil do 11 frames are unable to transmit from router though serial link what happen output error connection reset etc 12 characteristics of 4B/5B encoding in fddi 13 what is meant by tcp slow start 14 tacas+ has what advantages over tacas? waitning for your reply Regards, sun _ Chat with your friends as soon as they come online. Get Rediff Bol at http://bol.rediff.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Boston Cisco CCNP/CCIE Study Group
For those of you who might be new to the list, there is a group in the Boston area which meets to discuss and study for the CCNP and CCIE exams. We meet every Sunday at 10 am in Holbrook Mass. If you'd like to join the group, please send an email to me at [EMAIL PROTECTED] No equipment is required, but please plan on acquiring at least one router or switch at some point to bring to our lab. See you there! Bradley J. Wilson CCNA, CCDA, MCSE, CNX, NNCSS, MCT, CTT, (and 1/2 CCNP even though I don't think people should say things like that on their resumes - either you have it or you don't ;-) [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Blocking LSA Type 4 and 5's
>That's kindof the conclusion I have come across too, that OSPF just isn't >designed to be able to do this selectively. Obviously blocking LSA type >1's or 2's within an area would directly violate the RFC since ever >Router's link state database in a certain area has to match, and given that >you redistribute into the OSPF process itself and not into a given area it >makes sense that barring certain exceptions such as stub areas an ASBR will >always send the LSA 5's into every connected area. Correct. >Here's a slightly different question though for anyone. Could an ABR that >is connected to a stub area (not an NSSA area) be an ASBR? In other words, >does the fact that the router is a backbone router and possibly connected >to other areas as well make it exempt from the rule that you can have no >ASBRs in a stub area? Yes. The ASBR, in this case, isn't just "in the stub area." >In this situation would the router just not >advertise it's type 4 and 5 LSAs into that particular area? To be an ABR, a router must connect to the backbone and at least one nonzero area. Ignoring the case of default information origination, an ASBR must redistribute something. The characteristic is of the area, not the ABR. I see no reason why a physical router might not be connected to: External source Area 0.0.0.0 Area 0.0.0.1 Area 0.0.0.2 totally stubby Area 0.0.0.3 NSSA Area 0.0.0.4 stubby It can receive external LSAs from: its direct connection to an external area 0.0.0.1 area 0.0.0.3 It will send default (a special type 5) into areas 0.0.0.2, 0.0.0.3, and 0.0.0.4. > >At 11:52 AM 2/2/01 -0500, you wrote: >>So you are talking about a topology where you have an ASBR that also >>borders Area 0 and is thus also an ABR by definition. >> >>The question is then, "can I control which external prefixes enter the >>rest of the ospf domain as type 5 LSA's" I would have to say that you >>cannot by definition restrict the flow of LSA's in an OSPF domain beyond >>turning down interfaces. You can decide which area's will recieve Type >>3/4/5/7/10 etc by the use of stub areas and their variants and you can >>also minimize prefix flow's by summarizing at borders. However, there is >>no way to my knowledge that you can instruct a ABR to advertise some but >>not all type 5's into an area. >> >>Route filtering in OSPF is somewhat of a misnomer in my opinion. Since >>link state protocols do not advertise their routing table, but instead >>their link state database, the concept of prefix filtering within an OSPF >>domain is out of place. Correct. In any discussion such as this, one has to be very careful to keep the distinctions clear among: 1. LSDBs 2. Transient routing tables for OSPF (i.e., the output of the enhanced Dijkstra process, which is sent to the routing table manager but not otherwise retained) 3. The main routing table 4. Other sources of routing information that are redistributed into OSPF, and don't necessarily pass through #3 at all. It's perfectly valid to have "route filters" between #2 into #3, and from #4 into #1 (which become LSA-5's once into #1). >In fact, filting LSA's of any kind within an area >>directly violates the RFC in that all routers in an Area MUST maintain >>identical copies of the area topology. However, filtering type 5's at the >>ABR, to me, has some merits. I may be missing something here and Howard >>will likely point it out if I am. But in summary, there is no >>"distribute-list" type command that allows you to restrict the flow of >>LSA's within an OSPF domain. Inside an area. I designed a domain for a large company where one area, which was their communications research lab (one of the pioneers of the Internet), had its own BGP connectivity. This ASBR advertised default into the nonzero area. I filtered out the default route in the direction of area 0.0.0.0. In like manner, the backbone advertised aggregated corporate routes into this specific area, but I filtered default from entering the research lab area from the backbone. So, the policy enforced was: General corporate: default to the backbone for other corporate divisions (in other areas), and for external destinations Research: default to their own Internet connection for external destinations. Go to the backbone for other corproate destinations. > > >>Naturally I'm sure your aware that you can filter prefixes like mad when >>dealing with redistribution into or out of OSPF. >> >>HTH >> >>-pete >> >> >>*** REPLY SEPARATOR *** >> >>On 2/2/2001 at 7:48 AM Curtis Call wrote: >> >> >Anything, but to make it simple lets just say we're trying to redistribute >> >static routes. >> > >> >At 08:41 AM 2/2/01 -0500, you wrote: >> >>Redistribute what? >> >> >> >> >> >>*** REPLY SEPARATOR *** >> >> >> >>On 2/1/2
Re: Help me Urgent all CCIES please !!!!!!!!!!!!!!!
EEEKKK !!! I'd have to agree... I work with a couple paper CCIE's Phil CCNA Lot's of hands on- closing in on CCNP - Original Message - From: "Chris Supino" <[EMAIL PROTECTED]> To: "Ravi N Varma" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, February 03, 2001 4:39 PM Subject: RE: Help me Urgent all CCIES please !!! > Sounds like you may want to postpone that test, my friend. I personally > believe that one of the biggest problems with our industry is paper certs. > Do us all a favor and KNOW the material before you pass the exam. Just my > two cents. > > Christopher Supino > CCNA, MCSE, CNA 5, ASE > Senior Systems Engineer > TransNet Corp. > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Ravi N Varma > Sent: Saturday, February 03, 2001 12:53 PM > To: [EMAIL PROTECTED] > Subject: Help me Urgent all CCIES please !!! > > > Hi there , > > I am having trouble getting answers for these questions could you please > help me planing to take exam day after > please help me out > > 1.ip datagram contain which of the following > a,arp packet > b,bits > icmp messages > udp,tcp data > > > > 2. difference between tacas & tacas+ > > 3.in dlsw environment when all route explorer sent between dlsw peers how > it will be sent > a directed broadcast > b explorer frame > etc > 4 in x.25 environment if frame error occurs which one will reset connection > There is diagram two routers separated by serial link both ends one host at > each end > > A, Router or Host > > 5 same as above but protocol is HDLC in this situation what will happen > 6 what is result of sending a loop up signal to csu/dsu? > 7 what lane resolution protocol do > all nw protocols address to nsap > ip address to nsap > etc >8 nlsp & is-is link sate or distance vector > 9 when bridge receive a frame how it will be forwarded > to all ports or except disabled ports it will forward to all ports > 10 when tacas does not contain user account what it wiil do > 11 frames are unable to transmit from router though serial link what happen > output error > connection reset etc > 12 characteristics of 4B/5B encoding in fddi > 13 what is meant by tcp slow start > 14 tacas+ has what advantages over tacas? > > waitning for your reply > > Regards, > > sun > > _ > Chat with your friends as soon as they come online. Get Rediff Bol at > http://bol.rediff.com > > > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help me Urgent all CCIES please !!!!!!!!!!!!!!!
I have been in network for about 9 months and just got CCNA for about 2 months. I can answer at least half of the questions below. you should reschedule the CCIE test. If you really do not know the answer for 1st question, please review CCNA book. C.Q. Nguyen -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chris Supino Sent: Saturday, February 03, 2001 1:40 PM To: Ravi N Varma; [EMAIL PROTECTED] Subject: RE: Help me Urgent all CCIES please !!! Sounds like you may want to postpone that test, my friend. I personally believe that one of the biggest problems with our industry is paper certs. Do us all a favor and KNOW the material before you pass the exam. Just my two cents. Christopher Supino CCNA, MCSE, CNA 5, ASE Senior Systems Engineer TransNet Corp. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ravi N Varma Sent: Saturday, February 03, 2001 12:53 PM To: [EMAIL PROTECTED] Subject: Help me Urgent all CCIES please !!! Hi there , I am having trouble getting answers for these questions could you please help me planing to take exam day after please help me out 1.ip datagram contain which of the following a,arp packet b,bits icmp messages udp,tcp data 2. difference between tacas & tacas+ 3.in dlsw environment when all route explorer sent between dlsw peers how it will be sent a directed broadcast b explorer frame etc 4 in x.25 environment if frame error occurs which one will reset connection There is diagram two routers separated by serial link both ends one host at each end A, Router or Host 5 same as above but protocol is HDLC in this situation what will happen 6 what is result of sending a loop up signal to csu/dsu? 7 what lane resolution protocol do all nw protocols address to nsap ip address to nsap etc 8 nlsp & is-is link sate or distance vector 9 when bridge receive a frame how it will be forwarded to all ports or except disabled ports it will forward to all ports 10 when tacas does not contain user account what it wiil do 11 frames are unable to transmit from router though serial link what happen output error connection reset etc 12 characteristics of 4B/5B encoding in fddi 13 what is meant by tcp slow start 14 tacas+ has what advantages over tacas? waitning for your reply Regards, sun _ Chat with your friends as soon as they come online. Get Rediff Bol at http://bol.rediff.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Help me Urgent all CCIES please !!!!!!!!!!!!!!!
I was biting my tongue, but I have to agree. If someone doesn't have an intimate internal knowledge of the whole areas surrounding: #1, #3 through #6, #8-9, #11, and #13, they aren't REMOTELY close to being ready for the CCIE written -- and, for that mattern, the BSCN written. I'd also suggest that unless someone can be more specific about what aspects of an answer they need for the remainder, they also aren't ready. >Sounds like you may want to postpone that test, my friend. I personally >believe that one of the biggest problems with our industry is paper certs. >Do us all a favor and KNOW the material before you pass the exam. Just my >two cents. > >Christopher Supino >CCNA, MCSE, CNA 5, ASE >Senior Systems Engineer >TransNet Corp. > >-Original Message- >From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of >Ravi N Varma >Sent: Saturday, February 03, 2001 12:53 PM >To: [EMAIL PROTECTED] >Subject: Help me Urgent all CCIES please !!! > > >Hi there , > >I am having trouble getting answers for these questions could you please >help me planing to take exam day after >please help me out > >1.ip datagram contain which of the following > a,arp packet > b,bits > icmp messages > udp,tcp data > > > >2. difference between tacas & tacas+ > >3.in dlsw environment when all route explorer sent between dlsw peers how >it will be sent > a directed broadcast > b explorer frame >etc >4 in x.25 environment if frame error occurs which one will reset connection >There is diagram two routers separated by serial link both ends one host at >each end > >A, Router or Host > >5 same as above but protocol is HDLC in this situation what will happen >6 what is result of sending a loop up signal to csu/dsu? >7 what lane resolution protocol do > all nw protocols address to nsap > ip address to nsap > etc >8 nlsp & is-is link sate or distance vector >9 when bridge receive a frame how it will be forwarded > to all ports or except disabled ports it will forward to all ports >10 when tacas does not contain user account what it wiil do >11 frames are unable to transmit from router though serial link what happen > output error > connection reset etc >12 characteristics of 4B/5B encoding in fddi >13 what is meant by tcp slow start >14 tacas+ has what advantages over tacas? > > waitning for your reply > >Regards, > >sun > >_ >Chat with your friends as soon as they come online. Get Rediff Bol at >http://bol.rediff.com > > > > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OT: Web Sites Checking and Monitoring Tools
Would someone please recommend some free or commercial utilities that I can use to check and monitor websites status? Thank you all. Peter _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCIE lab
Did anybody encounter ipsec, security questions for the CCIE routing and switching lab exam? _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: TCP/IP print through firewall
Let's say that the workstation has IP address 10.0.0.100 and prints to the remote printer with address 100.100.100.100. The print reaches the firewall's address 10.0.0.1 and leaves the firewalls untrusted interface 50.50.50.50. The source IP is still 10.0.0.100 and it reaches the printer 100.100.100.100 just fine, because it's a public address. The printer replies back, but it's default gateway, 100.100.100.1 doesn't know where to route to network 10.0.0.0 so it gets dropped. If my firewall translates the address into it's public address 50.50.50.50, the printer will reply back to it, and I will need to do a "handoff" or NAT so that port 9100 traffic to 50.50.50.50 gets translated into 10.0.0.100 so my work station will get the reply. But, with this solution, the printer reply will end up at 10.0.0.100 if 10.0.0.200 tries to print too. How does this work? Thanks, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job > -Original Message- > From: Brant Stevens [SMTP:[EMAIL PROTECTED]] > Sent: Friday, February 02, 2001 7:59 PM > To: Ole Drews Jensen; [EMAIL PROTECTED] > Subject: RE: TCP/IP print through firewall > > You have to use NAT, but your firewall handles that, and translates your > RFC > 1918 address to one that is publically routable... What you need is an > outside interface address from your partners' network, that translates to > the RFC 1918 address on their network... > > Brant I. Stevens > Internetwork Solutions Engineer > Thrupoint, Inc. > 545 Fifth Avenue, 14th Floor > New York, NY. 10017 > 646-562-6540 > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Ole Drews Jensen > Sent: Friday, February 02, 2001 8:10 PM > To: '[EMAIL PROTECTED]' > Subject: TCP/IP print through firewall > > > All this reading about routed protocols and routing protocols makes you > think you know it all, until you are in front of a new funny situation. I > am > sure that someone out there can explain this to me real quick and easy, so > here's my question. > > We have a LAN with a private network 10.0.0.0, and from a workstation I > need > to print to a TCP/IP ready printer at another company, which has a public > address 100.100.100.100 (this is ofcourse not the real one). > > My computer should not have any problems getting routed to that printer > via > it's default gateway (the firewall), via the firewalls default gateway > (the > router), via the routers default gateway (our isp), and so on. > > BUT, the computer needs a response from the printer so it knows that it's > there and ready, but when the printer tries to reply to my computer > 10.1.2.3, it will be dropped by it's default gateway (the other company's > router), because the 10.0.0.0 network is not routable through the > Internet. > > I'm I right, and what would be the thing to do here? > > Would I HAVE to do a NAT on my workstation so the printer can reply back > that way? > > Thanks for any comments on this, > > Ole > > > Ole Drews Jensen > Systems Network Manager > CCNA, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > http://www.CiscoKing.com > > NEED A JOB ??? > http://www.oledrews.com/job > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Which BCMSN Cisco book?
Doesn't know about the second one, but you can read my comments about the books I used if you click the Cisco King link below. Hth, Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job > -Original Message- > From: Terry [SMTP:[EMAIL PROTECTED]] > Sent: Friday, February 02, 2001 9:51 PM > To: [EMAIL PROTECTED] > Subject: Which BCMSN Cisco book? > > Trying to decide which book to get for the switching test. Anyone out > there > compared them both? > > Building Cisco Multilayer Switched Networks > > Hardcover - 500 pages 1st edition (May 15, 2000) > Cisco Pr; ISBN: 1578700930 ; Dimensions (in inches): 1.40 x 9.47 x 7.70 > > - or - > > Cisco Ccnp Switching Exam Certification Guide > Hardcover - 576 pages Bk&Cd-Rom edition (December 20, 2000) > Cisco Systems; ISBN: 158727 ; Dimensions (in inches): 1.50 x 9.43 x > 7.71 > > Thanks > > Terry > > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: TCP/IP print through firewall
Hi, I may be way, way off on this but I'll take a stab. If everybody that uses the printer sits on the 10.0.0.0 network (ie. 10.0.0.100 and 10.0.0.200) couldn't you change the printers default gateway to be the 10.0.0.0 network? That way it would send the replies back to that network and everybody on it would get their print jobs done. I'm probably wrong but what the hell. =o) Mark Z. In a message dated 2/3/01 3:42:21 PM Eastern Standard Time, [EMAIL PROTECTED] writes: > Let's say that the workstation has IP address 10.0.0.100 and prints to the > remote printer with address 100.100.100.100. > > The print reaches the firewall's address 10.0.0.1 and leaves the firewalls > untrusted interface 50.50.50.50. The source IP is still 10.0.0.100 and it > reaches the printer 100.100.100.100 just fine, because it's a public > address. > > The printer replies back, but it's default gateway, 100.100.100.1 doesn't > know where to route to network 10.0.0.0 so it gets dropped. > > If my firewall translates the address into it's public address 50.50.50.50, > the printer will reply back to it, and I will need to do a "handoff" or NAT > so that port 9100 traffic to 50.50.50.50 gets translated into 10.0.0.100 so > my work station will get the reply. > > But, with this solution, the printer reply will end up at 10.0.0.100 if > 10.0.0.200 tries to print too. > > How does this work? > > Thanks, > > Ole > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
From the Godmother on ISIS
There's been enough discussion about area and router relationships, admittedly more with respect to OSPF than ISIS, that this seemed relevant. Radia is the principal architect of ISIS. >From: Radia Perlman - Boston Center for Networking <[EMAIL PROTECTED]> > >Subject: RE: [Isis-wg] (no subject) area/router boundary > >Date: Mon, 29 Jan 2001 11:09:40 -0500 (EST) > >Although all the replies have been correct, let me either clarify >or confuse things with a bit of history. Originally IS-IS was >designed for CLNP addresses, where the top part of the address (everything >but the ID portion) was the "area", so an address specified >an area, and a node could have lots of links in that area all >with the same address, but only be in one area. So a node, by >definition, if >"node" is defined by the address of the node, could only exist in >one area. > >With IS-IS for IP, though, this didn't really apply anymore since >a node has an address for each interface. > >But even with CLNP, it was possible to implement what looked to >the rest of the world like two nodes by having a router run >multiple instances of IS-IS, one for each (level 1) area, and >then the router could exist in both areas, and even pass routing >summaries between them. This was implemented in NLSP, a variant >of IS-IS for IPX. Such an implementation is straightforward >and completely compatible >with current IS-IS routers, who wouldn't be able to tell the >difference between such a beast and two routers. > >But the spec does say a router is in (at most) one level 1 area, and >might also >be a level 2 router, as someone on this thread pointed out. > >Radia > > > > > > > -Original Message- > > From: Volkan Ozdemir [mailto:[EMAIL PROTECTED]] > > Sent: Thursday, January 25, 2001 3:37 PM > > To: [EMAIL PROTECTED] > > Subject: [Isis-wg] (no subject) > > > > > > > > Hi, > > > > I had a basic question about IS-IS. In IS-IS is a > > router completely in a single area or is it possible to > > assign interfaces to different areas? > > > > Thanks > > > > Volkan > >___ >Isis-wg mailing list - [EMAIL PROTECTED] >http://external.juniper.net/mailman/listinfo/isis-wg _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Web Sites Checking and Monitoring Tools
www.mrtg.org or www.netsaint.org good luck Nabil -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Peter Sent: Saturday, February 03, 2001 3:13 PM To: [EMAIL PROTECTED] Subject: OT: Web Sites Checking and Monitoring Tools Would someone please recommend some free or commercial utilities that I can use to check and monitor websites status? Thank you all. Peter _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Configuring Bay router loopback
It is nice, but BCC doesn't do everything Site Manager does and vice versa. Also, last time I configured a router completely from scratch w/BCC and then used Site Manager it didn't recognize parts of the configuration. Your milage may vary though. I haven't tried this on newer versions of code to see if it improved. My recommendation from scratch is to boot off ti.cfg, etc then run install.bat and get 1 interface up, go into SM and finish the configuration or do it locally and TFTP the config to the router and reboot. I use BCC once the routers up to make small changes but prefer SM for major changes for compatibility reasons. Erick --- "Bradley J. Wilson" <[EMAIL PROTECTED]> wrote: > Don't forget that you may have another excellent > configuration tool at your > fingertips - the BCC (Bay Command Console), despite > its relative immaturity > compared to Site Mangler, is light-years ahead in > terms of speed and > reliability. If you have BayRS version 12.20 or > higher running on your > router, just type "bcc" at the TI prompt and press > enter. > > Once the BCC launches (it takes a second or two to > load), enter config mode > by typing "config." Change to the global IP object > by entering the "ip" > command, then you can configure a virtual interface > simply by entering > "virtual," then entering an IP address. I'm doing > all this from memory as I > write this, so it may be a little off: > > bcc> config > box# ip > ip# virtual > virtual# ip w.x.y.z /mask > > all done. > > Not too many people know about the BCC. IMO, Bay > did a fabulous job in > creating it, but a lousy job marketing and including > it in their training > courses. When I worked for Bay's Educational > Services, I made sure to cover > the BCC in every course I taught. Not every > instructor got as excited about > the BCC as I did...I still don't know why. It > rocks! :-) > > BJ > > > - Original Message - > From: Brian Lodwick > To: [EMAIL PROTECTED] ; [EMAIL PROTECTED] > Sent: Friday, February 02, 2001 8:14 PM > Subject: Re: Configuring Bay router loopback > > > Thanks Howard, > I found something tried it, but we couldn't get it > to work. > Here are the commands we tried: > Starting IP on the Circuitless Interface > To configure a circuitless IP interface, begin at > the Configuration Manager > window and proceed as follows: > 1. Select Protocols > IP > Circuitless IP > Create > to display the IP > Configuration window. > > 2. Edit the parameters on the IP Configuration > window. > > 3. Click on OK to save the circuitless IP interface. > > A special Select Protocols window opens, listing the > protocols you can > configure on a circuitless interface. > > 4. Select a protocol and click on OK. > > >>>Brian > > > > >From: "Howard C. Berkowitz" <[EMAIL PROTECTED]> > >Reply-To: "Howard C. Berkowitz" <[EMAIL PROTECTED]> > >To: [EMAIL PROTECTED] > >Subject: Re: Configuring Bay router loopback > >Date: Fri, 2 Feb 2001 18:18:02 -0500 > > > > >Anybody know how to configure a loopback > interface on a Bay router? > > > > > Brian __ Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help me Urgent all CCIES please !!!!!!!!!!!!!!!
Dude, the answers to all your questions are not hard to find. Break out your UniverCD and get searching. If you start now you will have all your answers in a couple of hours. - Original Message - From: Ravi N Varma <[EMAIL PROTECTED]> To: <[EMAIL PROTECTED]> Sent: Saturday, February 03, 2001 9:52 AM Subject: Help me Urgent all CCIES please !!! > Hi there , > > I am having trouble getting answers for these questions could you please help me planing to take exam day after > please help me out > > 1.ip datagram contain which of the following > a,arp packet > b,bits > icmp messages > udp,tcp data > > > > 2. difference between tacas & tacas+ > > 3.in dlsw environment when all route explorer sent between dlsw peers how it will be sent > a directed broadcast > b explorer frame > etc > 4 in x.25 environment if frame error occurs which one will reset connection > There is diagram two routers separated by serial link both ends one host at each end > > A, Router or Host > > 5 same as above but protocol is HDLC in this situation what will happen > 6 what is result of sending a loop up signal to csu/dsu? > 7 what lane resolution protocol do > all nw protocols address to nsap > ip address to nsap > etc >8 nlsp & is-is link sate or distance vector > 9 when bridge receive a frame how it will be forwarded > to all ports or except disabled ports it will forward to all ports > 10 when tacas does not contain user account what it wiil do > 11 frames are unable to transmit from router though serial link what happen > output error > connection reset etc > 12 characteristics of 4B/5B encoding in fddi > 13 what is meant by tcp slow start > 14 tacas+ has what advantages over tacas? > > waitning for your reply > > Regards, > > sun > > _ > Chat with your friends as soon as they come online. Get Rediff Bol at > http://bol.rediff.com > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Config-Register 0x1102
Can anyone tell me how to fix this problem. I was doing pass word recovery on a 2503 and I mistakenly entered 0x1102 = (hit reload to soon) at the end instead of 0x2102. When the router = reloaded this is what I got: =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2
Fw: Config-Register 0x1102
- Original Message -=20 From: Farrell A. Fletcher=20 To: [EMAIL PROTECTED]=20 Sent: Saturday, February 03, 2001 5:33 PM Subject: Config-Register 0x1102 Can anyone tell me how to fix this problem. I was doing pass word recovery on a 2503 and I mistakenly entered 0x1102 = (hit reload to soon) at the end instead of 0x2102. When the router = reloaded this is what I got: =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82
Re: Config-Register 0x1102
After a little more research I found the table of values (1200 BAUD). - Original Message -=20 From: Farrell A. Fletcher=20 To: [EMAIL PROTECTED]=20 Sent: Saturday, February 03, 2001 5:36 PM Subject: Fw: Config-Register 0x1102 - Original Message -=20 From: Farrell A. Fletcher=20 To: [EMAIL PROTECTED]=20 Sent: Saturday, February 03, 2001 5:33 PM Subject: Config-Register 0x1102 Can anyone tell me how to fix this problem. I was doing pass word recovery on a 2503 and I mistakenly entered = 0x1102 (hit reload to soon) at the end instead of 0x2102. When the = router reloaded this is what I got: = =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC = =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC = =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC = =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC = =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC = =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC= =E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2= =82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82=AC=E2=82= =AC=E2=82=AC=E2=82=A
Dial-up
Hi all, I have a Cisco 4000 and a Cisco 2503 IS IT POSSIBLE to connect the aux ports of both routers to simulate DDR? What I have read seems to me that I would need 2 modems to accomplish this. But I may be wrong? Thanks _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE lab
The answer to that would be a violation of the NDA. But I suggest you know them well!! LAB -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Johnny Soong Sent: Saturday, February 03, 2001 8:18 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: CCIE lab Did anybody encounter ipsec, security questions for the CCIE routing and switching lab exam? _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need CID exam info
Hi, Try this link for starters: http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/cid.pdf I took the test a few weeks ago and used the CiscoPress "Cisco Internetwork Design" book to prepare. As for how many questions are on the test, I don't remember exactly but it was one of the longer tests that I have taken. -dennis ""william"" <[EMAIL PROTECTED]> wrote in message 95fvsd$cqa$[EMAIL PROTECTED]">news:95fvsd$cqa$[EMAIL PROTECTED]... > Hi guys, > > How many question are there in the exam and what is the passing score ? > > Which area should I emphasis on? > > > I'm taking this exam on next week. > > Hopefully you'll can give me some inputs. > > > Thanks. > > > William > CCNA,CCDA,CCNP > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Admin distance on directly connected
You're right. --- John Neiberger <[EMAIL PROTECTED]> wrote: > Actually, I believe that a static route pointing to > a next hop has an AD of > 1, but a static route pointing to an interface shows > as directly connected > and has an AD of 0. > > I just tested this to be sure, but someone else > might want to verify it. > > John > > > > > > > A directly connected network has an AD=0. > > > A static route via Interface has AD=0 > > > A static route via IP address has AD=1 > Correct? > > > > A static route via interface cannot have AD of 0. > > It can have AD from 1 (default) to 255, just like > > any other static route. > > > > Sasa __ Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Subnet questions
I have three subnet / route summarization questions but I don't understand the answer, any help would be greatly appreciated. Q1) Choose the appropriate classless network address and broadcast address for the IP address 10.6.38.50 with a subnet mask of 255.255.240.0 A) 10.6.38.49 and 10.6.38.62 B) 10.6.32.0 and 10.6.47.255 C) 10.6.38.0 and 10.6.38.255 D) 10.0.0.0 and 10.255.255.255 Answer is B. Q2) Given a classless route summarization of 72.8.0.0 /13. Which IP address fall into this scope? A) 72.15.36.8 B) 72.13.1.1 C) 72.8.20.10 D) 72.7.200.100 E) 72.16.7.4 F) 72.40.1.8 Answer is A, B & C - why isn't E the ansewr as well? Q3) When using classless supernetting, which route best summarizes the following networks? 192.168.9.0 192.168.10.0 192.168.11.0 192.168.12.0 A) 192.168.0.9 / 20 B) 192.168.0.0 / 16 C) 192.168.9.0 / 22 D) 192.168.8.0 / 21 I thought D is the answer, but the answer is C. P.S. Is there anywhere I can get more practice on these type of questions? Regards, Hunt Lee IP Solution Analyst Cable and Wireless (Sydney) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: TCP/IP print through firewall
No, the 10.0.0.0 is private, and wont be found from the router on the remote network. Ole Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] http://www.CiscoKing.com NEED A JOB ??? http://www.oledrews.com/job -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Saturday, February 03, 2001 2:49 PM To: [EMAIL PROTECTED]; [EMAIL PROTECTED] Subject: Re: TCP/IP print through firewall Hi, I may be way, way off on this but I'll take a stab. If everybody that uses the printer sits on the 10.0.0.0 network (ie. 10.0.0.100 and 10.0.0.200) couldn't you change the printers default gateway to be the 10.0.0.0 network? That way it would send the replies back to that network and everybody on it would get their print jobs done. I'm probably wrong but what the hell. =o) Mark Z. In a message dated 2/3/01 3:42:21 PM Eastern Standard Time, [EMAIL PROTECTED] writes: Let's say that the workstation has IP address 10.0.0.100 and prints to the remote printer with address 100.100.100.100. The print reaches the firewall's address 10.0.0.1 and leaves the firewalls untrusted interface 50.50.50.50. The source IP is still 10.0.0.100 and it reaches the printer 100.100.100.100 just fine, because it's a public address. The printer replies back, but it's default gateway, 100.100.100.1 doesn't know where to route to network 10.0.0.0 so it gets dropped. If my firewall translates the address into it's public address 50.50.50.50, the printer will reply back to it, and I will need to do a "handoff" or NAT so that port 9100 traffic to 50.50.50.50 gets translated into 10.0.0.100 so my work station will get the reply. But, with this solution, the printer reply will end up at 10.0.0.100 if 10.0.0.200 tries to print too. How does this work? Thanks, Ole _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Recommendations for CCIE LAB Preparation Courses in Europe
Hello, I'd greately appreciate any feedback on European CCIE Lab Preparation Courses and same remarks on their quality. What do you think about the ProIN/Global Knowledge offerings? Best Regards, Gernot _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Subnet questions
On Sun, 4 Feb 2001, Hunt Lee wrote: > I have three subnet / route summarization questions but I don't > understand the answer, any help would be greatly appreciated. > > Q1) Choose the appropriate classless network address and broadcast > address for the IP address 10.6.38.50 with a subnet mask of > 255.255.240.0 > > A) 10.6.38.49 and 10.6.38.62 > > B) 10.6.32.0 and 10.6.47.255 > > C) 10.6.38.0 and 10.6.38.255 > > D) 10.0.0.0 and 10.255.255.255 > > Answer is B. No its not. The answer is 10.6.38.48 and 10.6.38.63. It probably meant to say classful. > Q2) Given a classless route summarization of 72.8.0.0 /13. Which IP > address fall into this scope? > > A) 72.15.36.8 > > B) 72.13.1.1 > > C) 72.8.20.10 > > D) 72.7.200.100 > > E) 72.16.7.4 > > F) 72.40.1.8 > > Answer is A, B & C - why isn't E the ansewr as well? The range of 72.8.0.0/13 is 72.8.0.0 - 72.15.255.255. Its 8 Class B's. > Q3) When using classless supernetting, which route best summarizes > the following networks? > > 192.168.9.0 > 192.168.10.0 > 192.168.11.0 > 192.168.12.0 > > A) 192.168.0.9 / 20 > > B) 192.168.0.0 / 16 > > C) 192.168.9.0 / 22 > > D) 192.168.8.0 / 21 > > I thought D is the answer, but the answer is C. A /22 is 4 Class C's, a /21 is 8. I recommand finding or making (to actually learn it) a subnet table and just keeping referencing it until you don't need to anymore. andy _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE lab
No, it wouldn't. And you can get the answer to those questions on CCO http://www.cisco.com/certifications - Original Message - From: "louieb" <[EMAIL PROTECTED]> To: "'Johnny Soong'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, February 03, 2001 6:06 PM Subject: RE: CCIE lab > The answer to that would be a violation of the NDA. But I suggest you know > them well!! > > LAB > > -Original Message- > From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of > Johnny Soong > Sent: Saturday, February 03, 2001 8:18 PM > To: [EMAIL PROTECTED] > Cc: [EMAIL PROTECTED] > Subject: CCIE lab > > > Did anybody encounter ipsec, security questions for the CCIE routing and > switching lab exam? > _ > Get your FREE download of MSN Explorer at http://explorer.msn.com > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Subnet questions
Let's work through one or two of these to demonstrate what needs to happen. I've never tried to explain it to someone else before, so this will be good practice and I hope it makes sense! :-) > I have three subnet / route summarization questions but I don't > understand the answer, any help would be greatly appreciated. > > Q1)??? Choose the appropriate classless network address and broadcast > address for the IP address 10.6.38.50 with a subnet mask of > 255.255.240.0 > > A)??? 10.6.38.49 and 10.6.38.62 > > B)??? 10.6.32.0 and 10.6.47.255 > > C)??? 10.6.38.0 and 10.6.38.255 > > D)??? 10.0.0.0 and 10.255.255.255 > > Answer is B. > ? Ok, to really understand what is happening our first step is to convert the IP address and mask to binary: 1010.0110.00100110.00110010 = 10.6.38.50 ... = 255.255.240.0 Focus on the bit boundary where the mask changes from ones to zeroes. What is the place value of that right-most one? It's 16. So you know that your subnet boundaries, in decimal, will be in increments of 16, e.g. 10.6.0.0, 10.6.16.0, 10.6.32.0, 10.6.48.0, etc. You can see that 10.6.38.50 falls in the 10.6.32.0 subnet so that is the first part of the answer. For the second part of the answer, take the subnet address and convert all the host bits from zero to one. 1010.0110.0010 . = 10.6.32.0 1010.0110.0010 . = 10.6.47.255 There ya go, that's all there is to it. If you understand binary, it's fairly simple but it still takes a lot of practice to do it quickly. Let's do one more using basically the same approach. > > Q2)??? Given a classless route summarization of 72.8.0.0 /13.? Which IP > address fall into this scope? > > A)??? 72.15.36.8 > > B)??? 72.13.1.1 > > C)??? 72.8.20.10 > > D)??? 72.7.200.100 > > E)??? 72.16.7.4 > > F)??? 72.40.1.8 > > Answer is A, B & C - why isn't E the ansewr as well? > ? Start by converting the prefix and mask to binary. 01001000.1 000.. = 72.8.0.0 .1 000.. = 255.248.0.0 = /13 You can see, as was stated in the question, that 72.8.0.0 is the boundary for that prefix and mask. The place value of the last bit in the mask is 8. The next higher network with that mask would be 72.16.0.0, so the range of the 72.8 prefix is 72.8.0.0 - 72.15.255.255. A,B,and C are all in the 72.8.0.0/13 network. D is in 72.0.0.0/13, E is in 72.16.0.0/13, and F is in 72.40.0.0/13. Does that make sense? If not, there are others who are better at explaining this than I am. If this does make sense, work through the last few problems in your first post and post those results to the list. Work through it step by step, justifying each step as you go, and you'll quickly see how this all works together. HTH, John ___ Send a cool gift with your E-Card http://www.bluemountain.com/giftcenter/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: TCP/IP print through firewall
In addition to the public routable address on the printer, you need a routable address on the workstation. You can accomplish this with a static NAT translation on your firewall. Most likely, you currently have one public address for your entire network for browsing. Hopefully you have a spare address that you are not using. Here is what is will look like: -request from workstation 10.x.x.x sends a print job to printer 100.100.100.100 -request goes to the workstation's gateway router to be routed to the printer. -gateway router forwards request to the firewall where the workstation's 10.x.x.x address is translated to a public address from the pool of addresses that were assigned to your company from your ISP. (This is already happening if the workstation has Internet access but the address currently being used for Internet browsing by the workstation is probably the same one as everyworkstation on your network. This is why you need to put a static translation on the firewall for this workstation. Same idea as if you have a webserver or email server with a private address which needs to be translated at the firewall). -There is one other possible gotcha--your firewall may need a rule which allows the remote printer in. Just my humble opinion. Let us know how it works out. "Ole Drews Jensen" <[EMAIL PROTECTED]> wrote in message 2019FB428FD3D311893700508B71EBFB54AE9E@RWR_MAIL_SVR">news:2019FB428FD3D311893700508B71EBFB54AE9E@RWR_MAIL_SVR... > All this reading about routed protocols and routing protocols makes you > think you know it all, until you are in front of a new funny situation. I am > sure that someone out there can explain this to me real quick and easy, so > here's my question. > > We have a LAN with a private network 10.0.0.0, and from a workstation I need > to print to a TCP/IP ready printer at another company, which has a public > address 100.100.100.100 (this is ofcourse not the real one). > > My computer should not have any problems getting routed to that printer via > it's default gateway (the firewall), via the firewalls default gateway (the > router), via the routers default gateway (our isp), and so on. > > BUT, the computer needs a response from the printer so it knows that it's > there and ready, but when the printer tries to reply to my computer > 10.1.2.3, it will be dropped by it's default gateway (the other company's > router), because the 10.0.0.0 network is not routable through the Internet. > > I'm I right, and what would be the thing to do here? > > Would I HAVE to do a NAT on my workstation so the printer can reply back > that way? > > Thanks for any comments on this, > > Ole > > > Ole Drews Jensen > Systems Network Manager > CCNA, MCSE, MCP+I > RWR Enterprises, Inc. > [EMAIL PROTECTED] > http://www.CiscoKing.com > > NEED A JOB ??? > http://www.oledrews.com/job > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Need CID exam info
If you need some study materials and/or cheet sheets, try http://www.gdd.net/cisco - Original Message - From: "Dennis" <[EMAIL PROTECTED]> Newsgroups: groupstudy.cisco To: <[EMAIL PROTECTED]> Sent: Saturday, February 03, 2001 6:20 PM Subject: Re: Need CID exam info > Hi, > Try this link for starters: > http://www.cisco.com/warp/public/10/wwtraining/certprog/testing/pdf/cid.pdf > > I took the test a few weeks ago and used the CiscoPress "Cisco Internetwork > Design" book to prepare. As for how many questions are on the test, I don't > remember exactly but it was one of the longer tests that I have taken. > > -dennis > ""william"" <[EMAIL PROTECTED]> wrote in message > 95fvsd$cqa$[EMAIL PROTECTED]">news:95fvsd$cqa$[EMAIL PROTECTED]... > > Hi guys, > > > > How many question are there in the exam and what is the passing score ? > > > > Which area should I emphasis on? > > > > > > I'm taking this exam on next week. > > > > Hopefully you'll can give me some inputs. > > > > > > Thanks. > > > > > > William > > CCNA,CCDA,CCNP > > > > > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Extremely Strange Routing Problem! (update)
John, By default EIGRP does auto-summarization. This cause a NETWORK statement to be all inclusive. And any route it learns about to classfull it (regardless of a no classfull statement). Even if you place the network statement in each classless masking you still summarize. Therefore, the EIGRP will place any routes it does not know about as learned via NULL0. Try using a no auto summary and review your routers passive statements. > ip route 10.2.50.70 255.255.255.255 10.2.70.75 50 > ip route 10.2.50.70 255.255.255.255 10.1.111.60 100 > ip route 10.0.0.0 255.0.0.0 Null0 (don't ask why this is here, it just is > ) This is VERY CLEARLY a summarization. EIGRP Summarizes by DEFAULT without the no auto summary. Please let me know if this helps. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of John Neiberger Sent: Thursday, February 01, 2001 5:27 PM To: [EMAIL PROTECTED] Subject: Re: Extremely Strange Routing Problem! (update) More info. The router does not appear to realize that the "directly" connected next-hop address is unreachable. RouterA#sho ip route 10.2.7.75 Routing entry for 10.0.0.0/8 Known via "static", distance 1, metric 0 (connected) Redistributing via eigrp 1, rip Advertised by eigrp 1 rip Routing Descriptor Blocks: * directly connected, via Null0 Route metric is 0, traffic share count is 1 So, even though the interface directly connected to the next-hop address is down, it thinks it is still reachable via a static routing pointing to Null0, a connected interface. Does this seem irrational to anyone but me?? If the next hop is down but there is a valid next-hop in the eigrp topology table, I want it to take that route, not the default route! Dang it all! :-) I still don't understand this behavior at all, but perhaps this will provide a clue to some of you. Going insane, John > Ok, this is completely baking my noodle. If someone can solve this, I will > fly to your location and kiss you on the forehead. > > Here is the layout: RouterA has two frame relay PVCs, point to point, that > go to router B. EIGRP is running on one link but not the other. (RIP is > running on routerA but is not currently being used on any links.) We have > static routes for the traffic we want to take the second PVC. At router A I > have the following: > > ip route 10.2.50.70 255.255.255.255 10.2.70.75 50 > ip route 10.2.50.70 255.255.255.255 10.1.111.60 100 > ip route 10.0.0.0 255.0.0.0 Null0 (don't ask why this is here, it just is > ) > > 10.2.50.70 is the loopback address of router B, and 10.2.70.75 is the IP > address at Router B's second PVC. 10.1.111.60 is the secondary dial backup > route. So far, so good. Now for the part that is completely freakin' me > out. > > The entire circuit at A that has the second PVC to B goes down, and > subsequently all PVCs on that circuit go down. The main circuit and its > associated PVCs are still up. Remember, eigrp is running on this link. > So... > > 10.2.70.75 is no longer available, that PVC is down. That static route is > removed from the routing table. There should now be an eigrp-learned route > with an AD of 90 for 10.2.50.70 on the main PVC. This is NOT happening! I > do a show ip route 10.2.50.70 and I get the following: > > RouterA#show ip route 10.2.50.70 > Routing entry for 10.0.0.0/8 >Known via "static", distance 1, metric 0 (connected) >Redistributing via eigrp 1, rip >Advertised by eigrp 1 > rip >Routing Descriptor Blocks: >* directly connected, via Null0 >Route metric is 0, traffic share count is 1 > > The secondary static route is also not in use because in this scenario, the > remote branch circuit is not completely down, and dial backup has not > occured. All of their other PVCs are up. > > Now, take a look at this: > > RouterA#sho ip eigrp topo 10.2.50.0 255.255.255.0 > IP-EIGRP topology entry for 10.2.50.0/24 >State is Passive, Query origin flag is 1, 1 Successor(s), FD is 2297856 >Routing Descriptor Blocks: >10.2.10.75 (Serial1/1.27), from 10.2.10.75, Send flag is 0x0 >Composite metric is (2297856/128256), Route is Internal >Vector metric: > Minimum bandwidth is 1544 Kbit > Total delay is 25000 microseconds > Reliability is 255/255 > Load is 12/255 > Minimum MTU is 1500 > Hop count is 1 > > There is a valid route in the topology table, but it is not being entered > into the routing table. Why not? Why is it choosing the less specific > 10.0.0.0/8 route to Null0? Ok, now it gets even stranger... > > Remember the static routes, one with an AD of 50 and the other with an AD of > 100? Once I removed them manually by typing no ip route 10.2.50.70 etc., > the valid route in the eigrp topology table was entered into the routing > table. What difference does this make? Those static
RE: Subnet questions
I believe you're right about Q3. The answer should've been D, not C. Regards, Han-Song CCNP/MCSE/MCDBA -Original Message- From: Hunt Lee [mailto:[EMAIL PROTECTED]] Sent: Saturday, February 03, 2001 3:11 PM To: [EMAIL PROTECTED] Subject: Subnet questions I have three subnet / route summarization questions but I don't understand the answer, any help would be greatly appreciated. Q1) Choose the appropriate classless network address and broadcast address for the IP address 10.6.38.50 with a subnet mask of 255.255.240.0 A) 10.6.38.49 and 10.6.38.62 B) 10.6.32.0 and 10.6.47.255 C) 10.6.38.0 and 10.6.38.255 D) 10.0.0.0 and 10.255.255.255 Answer is B. Q2) Given a classless route summarization of 72.8.0.0 /13. Which IP address fall into this scope? A) 72.15.36.8 B) 72.13.1.1 C) 72.8.20.10 D) 72.7.200.100 E) 72.16.7.4 F) 72.40.1.8 Answer is A, B & C - why isn't E the ansewr as well? Q3) When using classless supernetting, which route best summarizes the following networks? 192.168.9.0 192.168.10.0 192.168.11.0 192.168.12.0 A) 192.168.0.9 / 20 B) 192.168.0.0 / 16 C) 192.168.9.0 / 22 D) 192.168.8.0 / 21 I thought D is the answer, but the answer is C. P.S. Is there anywhere I can get more practice on these type of questions? Regards, Hunt Lee IP Solution Analyst Cable and Wireless (Sydney) _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP Preparation or Certification Library ???
Magdy, I am not really sure which one prepares you better for the CCNP exams - the Preparation Library or the Certification Library. But as I said earlier, the certification guides should complement the coursebooks in preparing for the exams. I have yet to see what are in the BSCN Certification Guide. I am waiting for my order to arrive. Cheers, Arthur >From: "Magdy Ibrahim" <[EMAIL PROTECTED]> >Reply-To: "Magdy Ibrahim" <[EMAIL PROTECTED]> >To: [EMAIL PROTECTED] >Subject: Re: CCNP Preparation or Certification Library ??? >Date: Sat, 3 Feb 2001 11:45:00 +0200 > >Hi Arthur, >That mean if I want to start preparing myself for CCNP which one is better >to get full understanding the CCNP more than the other one? >the Cisco CCNP Preparation Library??? >OR the Cisco CCNP Certification Library??? > >Regards, > >Magdy >MCSE, CCNA > > >""Arthur Simplina"" <[EMAIL PROTECTED]> wrote in message >[EMAIL PROTECTED]">news:[EMAIL PROTECTED]... > > The CCNP Preparation Library(ISBN 1587050137) consists of 4 coursebooks: > > BSCN > > BCMSN > > BCRAN > > CIT > > > > The CCNP Certification Library (ISBN 1587200376) consists of 4 exam > > Certification Guides as above each with CD-ROM test engines. These > > certification guides complement the coursebooks. > > > > For now I got the BSCN and I am very satisfied with the contents. My >order > > for the BSCN Exam Certification Guide has not yet arrived. > > > > The BSCN book is the reference book for the Cisco Network Academy 5th > > semester course. > > > > Cheers, > > > > Art > > > > _ Get your FREE download of MSN Explorer at http://explorer.msn.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Subnet questions
At 10:11 AM 2/4/01, Hunt Lee wrote: >I have three subnet / route summarization questions but I don't >understand the answer, any help would be greatly appreciated. > >Q1)Choose the appropriate classless network address and broadcast >address for the IP address 10.6.38.50 with a subnet mask of >255.255.240.0 > >A)10.6.38.49 and 10.6.38.62 > >B)10.6.32.0 and 10.6.47.255 > >C)10.6.38.0 and 10.6.38.255 > >D)10.0.0.0 and 10.255.255.255 > >Answer is B. Answer B looks right to me. Node 10.6.38.50 is on network 10.6.32.0. In the third octet, the first four bits are network bits. In the third octet, the only bit of the first four bits that is on in the number 38 is the 2^5 bit. For broadcast turn on all node bits: the last four bits of the third octet and all eight bits of the fourth octet. Also turn on the 2^5 bit in the third octet. > > >Q2)Given a classless route summarization of 72.8.0.0 /13. Which IP >address fall into this scope? > >A)72.15.36.8 > >B)72.13.1.1 > >C)72.8.20.10 > >D)72.7.200.100 > >E)72.16.7.4 > >F)72.40.1.8 > >Answer is A, B & C - why isn't E the ansewr as well? If I understand the question right, you should be looking for the answers that share the same left-most 13 bits. The first octet is the same for all of them, so concentrate on the second octet. Put the second octet into binary. A, B, and C are all 1 in the left-most 5 bits of the second octet. The rest aren't. > > >Q3)When using classless supernetting, which route best summarizes >the following networks? > >192.168.9.0 >192.168.10.0 >192.168.11.0 >192.168.12.0 > >A)192.168.0.9 / 20 > >B)192.168.0.0 / 16 > >C)192.168.9.0 / 22 > >D)192.168.8.0 / 21 > >I thought D is the answer, but the answer is C. I think it's D also. If you go to the 22nd bit, then 192.168.12.0 is different than the others. > > >P.S. Is there anywhere I can get more practice on these type of >questions? > >Regards, >Hunt Lee >IP Solution Analyst >Cable and Wireless (Sydney) > > > >_ >FAQ, list archives, and subscription info: >http://www.groupstudy.com/list/cisco.html >Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Priscilla Oppenheimer http://www.priscilla.com _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cvoice
True, you can take any test you want , but have to complete all prequisites, to be "official". ""umerkhan"" <[EMAIL PROTECTED]> wrote in message 004e01c08dfc$e84cdbc0$a90a80cb@pentium686">news:004e01c08dfc$e84cdbc0$a90a80cb@pentium686... > Hi, > can anyone tell me is it necessary to pass the ccnp certification in = > order to take the cvoice 2.0 exam. i have checked with the cisco website = > and only acrc (or bscn ) and ccna are written in the prequisites. a = > friend of mine was telling me that you can appear for the exam but wont = > get the certificate before passing the whole of ccnp , is it true.? > > regards, > umer=20 > [EMAIL PROTECTED] > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Subnet questions
B is the correct answer. - Original Message - From: Andy <[EMAIL PROTECTED]> To: Hunt Lee <[EMAIL PROTECTED]> Cc: <[EMAIL PROTECTED]> Sent: Saturday, February 03, 2001 9:40 AM Subject: Re: Subnet questions > > > On Sun, 4 Feb 2001, Hunt Lee wrote: > > > I have three subnet / route summarization questions but I don't > > understand the answer, any help would be greatly appreciated. > > > > Q1) Choose the appropriate classless network address and broadcast > > address for the IP address 10.6.38.50 with a subnet mask of > > 255.255.240.0 > > > > A) 10.6.38.49 and 10.6.38.62 > > > > B) 10.6.32.0 and 10.6.47.255 > > > > C) 10.6.38.0 and 10.6.38.255 > > > > D) 10.0.0.0 and 10.255.255.255 > > > > Answer is B. > > No its not. The answer is 10.6.38.48 and 10.6.38.63. It probably meant to > say classful. > > > Q2) Given a classless route summarization of 72.8.0.0 /13. Which IP > > address fall into this scope? > > > > A) 72.15.36.8 > > > > B) 72.13.1.1 > > > > C) 72.8.20.10 > > > > D) 72.7.200.100 > > > > E) 72.16.7.4 > > > > F) 72.40.1.8 > > > > Answer is A, B & C - why isn't E the ansewr as well? > > The range of 72.8.0.0/13 is 72.8.0.0 - 72.15.255.255. Its 8 Class B's. > > > Q3) When using classless supernetting, which route best summarizes > > the following networks? > > > > 192.168.9.0 > > 192.168.10.0 > > 192.168.11.0 > > 192.168.12.0 > > > > A) 192.168.0.9 / 20 > > > > B) 192.168.0.0 / 16 > > > > C) 192.168.9.0 / 22 > > > > D) 192.168.8.0 / 21 > > > > I thought D is the answer, but the answer is C. > > A /22 is 4 Class C's, a /21 is 8. I recommand finding or making (to > actually learn it) a subnet table and just keeping referencing it until > you don't need to anymore. > > andy > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
router and subnet question
Hi. I have a 2514 router, 2 hubs, and 2 other routers (1602 and 2502). The 2514 has 2 serial interfaces, and 2 ethernet interfaces. Basically, I have two questions: 1. You know how if you are not on the same subnet you cannot even ping the router? How come you can telnet from home into remote sites? I dont really understand this, at all. I have 3 pcs at home (though, all old...). The routers ip address is 192.168.0.1 on e0, and e1 is 172.16.3.1. Shouldnt i be able to ping the class b address from the class a address router? Or telnet into it from a different subnet? If not, how come on somehting like firewallking.com we can access any router? I dont understnad that! 2. How can I simulate two networks. Such as, assuming one router is in Chicago, and the other in NYC. Can I do that within the vicinity of my house? Or am i reaching? I was thinking, just assign them to different subnets, and basically that is that. But we have to deal iwth accesslists, protocols, and the frame relay simulation, right? Thanks, and Id really appreciated comments on this. A lot of newbies are in the same boat __ Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Subnet questions
Yeah, misread the subnet, I see it now. On Sat, 3 Feb 2001, Groupstudy wrote: > B is the correct answer. > > - Original Message - > From: Andy <[EMAIL PROTECTED]> > To: Hunt Lee <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]> > Sent: Saturday, February 03, 2001 9:40 AM > Subject: Re: Subnet questions > > > > > > > > On Sun, 4 Feb 2001, Hunt Lee wrote: > > > > > I have three subnet / route summarization questions but I don't > > > understand the answer, any help would be greatly appreciated. > > > > > > Q1) Choose the appropriate classless network address and broadcast > > > address for the IP address 10.6.38.50 with a subnet mask of > > > 255.255.240.0 > > > > > > A) 10.6.38.49 and 10.6.38.62 > > > > > > B) 10.6.32.0 and 10.6.47.255 > > > > > > C) 10.6.38.0 and 10.6.38.255 > > > > > > D) 10.0.0.0 and 10.255.255.255 > > > > > > Answer is B. > > > > No its not. The answer is 10.6.38.48 and 10.6.38.63. It probably meant to > > say classful. > > > > > Q2) Given a classless route summarization of 72.8.0.0 /13. Which IP > > > address fall into this scope? > > > > > > A) 72.15.36.8 > > > > > > B) 72.13.1.1 > > > > > > C) 72.8.20.10 > > > > > > D) 72.7.200.100 > > > > > > E) 72.16.7.4 > > > > > > F) 72.40.1.8 > > > > > > Answer is A, B & C - why isn't E the ansewr as well? > > > > The range of 72.8.0.0/13 is 72.8.0.0 - 72.15.255.255. Its 8 Class B's. > > > > > Q3) When using classless supernetting, which route best summarizes > > > the following networks? > > > > > > 192.168.9.0 > > > 192.168.10.0 > > > 192.168.11.0 > > > 192.168.12.0 > > > > > > A) 192.168.0.9 / 20 > > > > > > B) 192.168.0.0 / 16 > > > > > > C) 192.168.9.0 / 22 > > > > > > D) 192.168.8.0 / 21 > > > > > > I thought D is the answer, but the answer is C. > > > > A /22 is 4 Class C's, a /21 is 8. I recommand finding or making (to > > actually learn it) a subnet table and just keeping referencing it until > > you don't need to anymore. > > > > andy > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
tftp server
Hi again. I know the commands to transfer my flash to the tftp server (as in Lammle's book) BUT it did not work on my router. I got as far as where we ought to see "" And it said: "Copy aborted. Tftp Timeout." I did install tftp on my pc, and gave it an ip address, but never made a file to store the data. Does anyone know where my error is? __ Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VLAN routing on 2600
except 2600's don't do the fe thing.. - Original Message - From: "Daniel Cotts" <[EMAIL PROTECTED]> To: "'kz'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Friday, 02 February, 2001 10:26 Subject: RE: VLAN routing on 2600 > Those with 100Mbs ports. > > > -Original Message- > > From: kz [mailto:[EMAIL PROTECTED]] > > Sent: Friday, February 02, 2001 4:33 AM > > To: [EMAIL PROTECTED] > > Subject: VLAN routing on 2600 > > > > > > Hi > > > > Is it possible to perform VLAN routing on 2600 routers? > > > > thanx > > kz > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct > > and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: tftp server
Can you ping the router from the workstation and vice versa? If so make sure the tftp server is started and try copy flash tftp. -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Charles Paver Sent: Saturday, February 03, 2001 10:02 PM To: [EMAIL PROTECTED] Subject: tftp server Hi again. I know the commands to transfer my flash to the tftp server (as in Lammle's book) BUT it did not work on my router. I got as far as where we ought to see "" And it said: "Copy aborted. Tftp Timeout." I did install tftp on my pc, and gave it an ip address, but never made a file to store the data. Does anyone know where my error is? __ Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Fast Ethernet on 2600's
I goofed on that one.. as Pagorn corrected me - the 2620's have fe port(s) ... and as I did the correct thing and looked it up (after the fact) the 2650's do also. Too fast on the keyboard I guess. :-( My train of thought was modules... the book doesn't give any fe modules for the 2600s although there are for the 3600's. Forgot about the fixed ports. Kevin Wigle _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VLAN routing on 2600
Aren't 2620's FE? - Original Message - From: "Kevin Wigle" <[EMAIL PROTECTED]> To: "Daniel Cotts" <[EMAIL PROTECTED]>; "'kz'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, February 03, 2001 11:13 PM Subject: Re: VLAN routing on 2600 > except 2600's don't do the fe thing.. > > > - Original Message - > From: "Daniel Cotts" <[EMAIL PROTECTED]> > To: "'kz'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Friday, 02 February, 2001 10:26 > Subject: RE: VLAN routing on 2600 > > > > Those with 100Mbs ports. > > > > > -Original Message- > > > From: kz [mailto:[EMAIL PROTECTED]] > > > Sent: Friday, February 02, 2001 4:33 AM > > > To: [EMAIL PROTECTED] > > > Subject: VLAN routing on 2600 > > > > > > > > > Hi > > > > > > Is it possible to perform VLAN routing on 2600 routers? > > > > > > thanx > > > kz > > > > > > _ > > > FAQ, list archives, and subscription info: > > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct > > > and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
question: how is bandwidth sold ?
how does this work practically. selling one's part of bandwidth ? how is actually implemented by the service provider ? any other details please email me if this is not exactly suited to this list thanks __ Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN questions ...!
I'm working through one of the labs at fatkid(401, Advanced OSPF) and = have a couple of questions. The one part of the configuration I can't = understand is the BRI's on R2 and R3. There is no configuration for = the name of the calling device or called device. when I tried this the = routers would no connect, well at least not for more than a second. = "debug ppp nego" showed called from hang-up. Most examples = I've worked with makes use of the name option on the "dialer map" = command? My other question is specific to the "dialer idle-timeout 1 either". I = know what the command does but with one second. Has anyone worked through this lab and got it working with the solution = on the site... What was your observations on the bri line. Mines keep bouncing up and down... TIA Nigel.. _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ISDN questions ...!
Just an FYI/gotcha I think setting the dialer idle-timeout to 1 causes problems. We're all impatient and want the line to come down quickly so we can prove the solution but I've noticed that when the "dialer idle-timeout" is less than the "dialer wait-for-carrier-time" then behaviour that is comparable to what you mention here (flapping line) occurs. Jamie -Original Message- From: Nigel Taylor [mailto:[EMAIL PROTECTED]] Sent: Sunday, February 04, 2001 12:38 AM To: Cisco Group Study; CCIE_Lab Group Study Cc: Bryant Andrews Subject: ISDN questions ...! I'm working through one of the labs at fatkid(401, Advanced OSPF) and = have a couple of questions. The one part of the configuration I can't = understand is the BRI's on R2 and R3. There is no configuration for = the name of the calling device or called device. when I tried this the = routers would no connect, well at least not for more than a second. = "debug ppp nego" showed called from hang-up. Most examples = I've worked with makes use of the name option on the "dialer map" = command? My other question is specific to the "dialer idle-timeout 1 either". I = know what the command does but with one second. Has anyone worked through this lab and got it working with the solution = on the site... What was your observations on the bri line. Mines keep bouncing up and down... TIA Nigel.. ___ To unsubscribe from the CCIELAB list, send a message to [EMAIL PROTECTED] with the body containing: unsubscribe ccielab _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ISDN questions ...!
jamie, Ok, did some more testing and this thing will work without a name. I also changed the dialer idle-time-out value. The one problem I'm seeing now is on router 2. When I pull the serial conn. from router 3 to the frame switch the bri line kick in and passes all the routes. However when I break the link from r2 to the frame switch, nothing. R3 never forms a full state with R4 and r2 and R3 doesn't pass routes even though the bri line is up Any thoughts.. Nigel... - Original Message - From: Price, Jamie <[EMAIL PROTECTED]> To: 'Nigel Taylor' <[EMAIL PROTECTED]>; Cisco Group Study <[EMAIL PROTECTED]>; CCIE_Lab Group Study <[EMAIL PROTECTED]> Cc: Bryant Andrews <[EMAIL PROTECTED]> Sent: Sunday, February 04, 2001 1:49 AM Subject: RE: ISDN questions ...! > Just an FYI/gotcha > > I think setting the dialer idle-timeout to 1 causes problems. > > We're all impatient and want the line to come down quickly so we can prove > the solution but I've noticed that when the "dialer idle-timeout" is less > than the "dialer wait-for-carrier-time" then behaviour that is comparable to > what you mention here (flapping line) occurs. > > Jamie > > -Original Message- > From: Nigel Taylor [mailto:[EMAIL PROTECTED]] > Sent: Sunday, February 04, 2001 12:38 AM > To: Cisco Group Study; CCIE_Lab Group Study > Cc: Bryant Andrews > Subject: ISDN questions ...! > > > I'm working through one of the labs at fatkid(401, Advanced OSPF) and = > have a couple of questions. The one part of the configuration I can't = > understand is the BRI's on R2 and R3. There is no configuration for = > the name of the calling device or called device. when I tried this the = > routers would no connect, well at least not for more than a second. = > "debug ppp nego" showed called from hang-up. Most examples = > I've worked with makes use of the name option on the "dialer map" = > command? > > My other question is specific to the "dialer idle-timeout 1 either". I = > know what the command does but with one second. > > > Has anyone worked through this lab and got it working with the solution = > on the site... What was your observations on the bri line. > Mines keep bouncing up and down... > > TIA > > Nigel.. > > > > ___ > To unsubscribe from the CCIELAB list, send a message to > [EMAIL PROTECTED] with the body containing: > unsubscribe ccielab > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Help me Urgent all CCIES please !!!!!!!!!!!!!!!
What do you consider a paper CCIE? I've known some not-so-impressive CCIEs, but I don't know of any I'd consider paper. Michael --- Circusnuts <[EMAIL PROTECTED]> wrote: > EEEKKK !!! I'd have to agree... I work with a > couple paper CCIE's > > Phil > CCNA Lot's of hands on- closing in on CCNP > > - Original Message - > From: "Chris Supino" <[EMAIL PROTECTED]> > To: "Ravi N Varma" <[EMAIL PROTECTED]>; > <[EMAIL PROTECTED]> > Sent: Saturday, February 03, 2001 4:39 PM > Subject: RE: Help me Urgent all CCIES please > !!! > > > > Sounds like you may want to postpone that test, my > friend. I personally > > believe that one of the biggest problems with our > industry is paper > certs. > > Do us all a favor and KNOW the material before you > pass the exam. Just my > > two cents. > > > > Christopher Supino > > CCNA, MCSE, CNA 5, ASE > > Senior Systems Engineer > > TransNet Corp. > > > > -Original Message- > > From: [EMAIL PROTECTED] > [mailto:[EMAIL PROTECTED]]On Behalf Of > > Ravi N Varma > > Sent: Saturday, February 03, 2001 12:53 PM > > To: [EMAIL PROTECTED] > > Subject: Help me Urgent all CCIES please > !!! > > > > > > Hi there , > > > > I am having trouble getting answers for these > questions could you please > > help me planing to take exam day after > > please help me out > > > > 1.ip datagram contain which of the following > > a,arp packet > > b,bits > > icmp messages > > udp,tcp data > > > > > > > > 2. difference between tacas & tacas+ > > > > 3.in dlsw environment when all route explorer > sent between dlsw peers how > > it will be sent > > a directed broadcast > > b explorer frame > > etc > > 4 in x.25 environment if frame error occurs which > one will reset > connection > > There is diagram two routers separated by serial > link both ends one host > at > > each end > > > > A, Router or Host > > > > 5 same as above but protocol is HDLC in this > situation what will happen > > 6 what is result of sending a loop up signal to > csu/dsu? > > 7 what lane resolution protocol do > > all nw protocols address to nsap > > ip address to nsap > > etc > >8 nlsp & is-is link sate or distance vector > > 9 when bridge receive a frame how it will be > forwarded > > to all ports or except disabled ports it will > forward to all ports > > 10 when tacas does not contain user account what > it wiil do > > 11 frames are unable to transmit from router > though serial link what > happen > > output error > > connection reset etc > > 12 characteristics of 4B/5B encoding in fddi > > 13 what is meant by tcp slow start > > 14 tacas+ has what advantages over tacas? > > > > waitning for your reply > > > > Regards, > > > > sun > > > > > _ > > Chat with your friends as soon as they come > online. Get Rediff Bol at > > http://bol.rediff.com > > > > > > > > > > _ > > FAQ, list archives, and subscription info: > > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to > [EMAIL PROTECTED] > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] __ Get personalized email addresses from Yahoo! Mail - only $35 a year! http://personal.mail.yahoo.com/ _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Subnet questions
I don't want to explain, it will take me too long. There have been a number of threads regarding subnet addressing lately and they had some good examples to examine. Search the archives. Be patient, learning to subnet and summarize off the top of your head requires some time and practice. The best way to learn is to just sit down and play with binary. Take a look at the following URL's for complete discussions on this topic. I think you will get what you need from them: http://www.cisco.com/univercd/cc/td/doc/cisintwk/idg4/nd20a.htm http://www.3com.com/nsc/501302.html - Original Message - From: Han-Song Kim <[EMAIL PROTECTED]> To: 'Groupstudy' <[EMAIL PROTECTED]> Sent: Saturday, February 03, 2001 8:10 PM Subject: RE: Subnet questions > Sorry about the previous response. I thought you're responding back to my > earlier e-mail. Still, why is the answer to Q3 C, not D? > > > > -Original Message- > From: Groupstudy [mailto:[EMAIL PROTECTED]] > Sent: Saturday, February 03, 2001 7:31 PM > To: [EMAIL PROTECTED] > Subject: Re: Subnet questions > > > B is the correct answer. > > - Original Message - > From: Andy <[EMAIL PROTECTED]> > To: Hunt Lee <[EMAIL PROTECTED]> > Cc: <[EMAIL PROTECTED]> > Sent: Saturday, February 03, 2001 9:40 AM > Subject: Re: Subnet questions > > > > > > > > On Sun, 4 Feb 2001, Hunt Lee wrote: > > > > > I have three subnet / route summarization questions but I don't > > > understand the answer, any help would be greatly appreciated. > > > > > > Q1) Choose the appropriate classless network address and broadcast > > > address for the IP address 10.6.38.50 with a subnet mask of > > > 255.255.240.0 > > > > > > A) 10.6.38.49 and 10.6.38.62 > > > > > > B) 10.6.32.0 and 10.6.47.255 > > > > > > C) 10.6.38.0 and 10.6.38.255 > > > > > > D) 10.0.0.0 and 10.255.255.255 > > > > > > Answer is B. > > > > No its not. The answer is 10.6.38.48 and 10.6.38.63. It probably meant to > > say classful. > > > > > Q2) Given a classless route summarization of 72.8.0.0 /13. Which IP > > > address fall into this scope? > > > > > > A) 72.15.36.8 > > > > > > B) 72.13.1.1 > > > > > > C) 72.8.20.10 > > > > > > D) 72.7.200.100 > > > > > > E) 72.16.7.4 > > > > > > F) 72.40.1.8 > > > > > > Answer is A, B & C - why isn't E the ansewr as well? > > > > The range of 72.8.0.0/13 is 72.8.0.0 - 72.15.255.255. Its 8 Class B's. > > > > > Q3) When using classless supernetting, which route best summarizes > > > the following networks? > > > > > > 192.168.9.0 > > > 192.168.10.0 > > > 192.168.11.0 > > > 192.168.12.0 > > > > > > A) 192.168.0.9 / 20 > > > > > > B) 192.168.0.0 / 16 > > > > > > C) 192.168.9.0 / 22 > > > > > > D) 192.168.8.0 / 21 > > > > > > I thought D is the answer, but the answer is C. > > > > A /22 is 4 Class C's, a /21 is 8. I recommand finding or making (to > > actually learn it) a subnet table and just keeping referencing it until > > you don't need to anymore. > > > > andy > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: VLAN routing on 2600
The 2620 and 2621 have fast ethernet ports and support trunking with IP Plus IOS. - Original Message - From: Kevin Wigle <[EMAIL PROTECTED]> To: Daniel Cotts <[EMAIL PROTECTED]>; 'kz' <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> Sent: Saturday, February 03, 2001 8:13 PM Subject: Re: VLAN routing on 2600 > except 2600's don't do the fe thing.. > > > - Original Message - > From: "Daniel Cotts" <[EMAIL PROTECTED]> > To: "'kz'" <[EMAIL PROTECTED]>; <[EMAIL PROTECTED]> > Sent: Friday, 02 February, 2001 10:26 > Subject: RE: VLAN routing on 2600 > > > > Those with 100Mbs ports. > > > > > -Original Message- > > > From: kz [mailto:[EMAIL PROTECTED]] > > > Sent: Friday, February 02, 2001 4:33 AM > > > To: [EMAIL PROTECTED] > > > Subject: VLAN routing on 2600 > > > > > > > > > Hi > > > > > > Is it possible to perform VLAN routing on 2600 routers? > > > > > > thanx > > > kz > > > > > > _ > > > FAQ, list archives, and subscription info: > > > http://www.groupstudy.com/list/cisco.html > > > Report misconduct > > > and Nondisclosure violations to [EMAIL PROTECTED] > > > > > > > _ > > FAQ, list archives, and subscription info: > http://www.groupstudy.com/list/cisco.html > > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > > > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] > _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Telco guru question
Hello CCNP (in progress). How hard was it? I am a Ph.D (in progress), just finished my associates degree, so I will be there soon Dan West wrote: > Hi All, > > Any telco guys know what a "BIPP" (BIP)? refers to? > One of our guys here says it's a circuit "out to the > Internet". Better phrased, is BIPP something physical? > circuit? card/slot? etc...I was thinking maybe it was > where two LECS hand-off on a high cap customer > circuit. > > OR Is it something like a demarq point? Thanks and > have a great weekend! > > = > Don't forget to cross your digits... > Dan West -- CCNA, CCNP (in progress) > > __ > Get personalized email addresses from Yahoo! Mail - only $35 > a year! http://personal.mail.yahoo.com/ > > _ > FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html > Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] _ FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
