Re: CCIE written advice [7:16188]
Patrick, You are right on track .Here is a list of resources that I used to prepare for the CCIE written exam : 1) Book by Caslow 2) Internet routing Arch by Halabi 3) Token Ring paper from www.ccprep.com 4) Jeff Doyle Routing TCP/IP Volume I 5) RIF paper from www.groupstudy.com 6) OSPF Design Guide from CCO 7) Study notes from cramsession.com 8) Exam cram book 9) Boson tests 1,2 and 3 10) CCIE Study guide from www.ccbootcamp.com Wish you all the best ... Jaspreet Bhatia Patrick Donlon wrote: I'm slowly starting to get back into reading for the RS written exam after starting a new job and I've made a rough list of what will guide me too and hopefully through the exam. I've started on Doyle's Routing TCP/IP vol 1, next I've got the Token ring white paper from CCprep and OSPF design guide from CCO, planning on getting CCIE RS Exam cram book and Boson tests 1,2 and maybe 3. Obviously everyone has a different approach to an exam but if there are any major topics I'm missing out on please let me know and also recommendations on the exam preparation book, cheers Pat Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16192t=16188 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Best Materials For CCIE Written and Lab Exams [7:16196]
Why don't you join us in Detroit in September? We're going to do a three-day marathon study session for the written exam. Two days of directed lecture, a mock exam the morning of the third day, and in the afternoon, everybody takes the actual exam. CCBootCamp is hosting it, and you can find the details on their page... --- Dennis -Original Message- From: George Murphy CCNP, CCDP [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 15, 2001 9:31 AM To: [EMAIL PROTECTED] Subject: Best Materials For CCIE Written and Lab Exams [7:16196] Hi Folks, I am seeking advice on materials for the CCIE written and lab exams. I have been considering the McGraw Hill All-In-One CCIE study guide as well as their CCIE Lab Practice Kit. I have been watching the published dates of these and considering that as a factor but would appreciate any suggestions or feedback from anyone who has found any of the resources available out there to be the best (CCPrep, Boson etc, etc). I have also read reviews on each one but value responses from this list more. Thanks for any assistance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16200t=16196 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Best Materials For CCIE Written and Lab Exams [7:16196]
I love the Lab Practice Kit - the price-per-lab ratio is low, and it's a great stepping stone towards the larger lab collections (ccbootcamp, etc.). There are a lot of mistakes, but it's kind of fun to figure out what they're *really* trying to say. There are also a few oddities - in the solutions, the authors left the no ip classless command in place. They did their labs with IOS 11.2, and no ip classless is the default, but there's no explanation as to why you would or why you would not leave that command in place - something to work out in your practice lab! BJ -Original Message- From: George Murphy CCNP, CCDP [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 15, 2001 12:31 PM To: [EMAIL PROTECTED] Subject: Best Materials For CCIE Written and Lab Exams [7:16196] Hi Folks, I am seeking advice on materials for the CCIE written and lab exams. I have been considering the McGraw Hill All-In-One CCIE study guide as well as their CCIE Lab Practice Kit. I have been watching the published dates of these and considering that as a factor but would appreciate any suggestions or feedback from anyone who has found any of the resources available out there to be the best (CCPrep, Boson etc, etc). I have also read reviews on each one but value responses from this list more. Thanks for any assistance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16199t=16196 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Best Materials For CCIE Written and Lab Exams [7:16196]
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Those are good starting points but as you get the hang of lab work you'll want to start doing Fatkid, Solution Labs, and of course ccbootcamp. John Kaberna CCIE #7146 NETCG Inc Cisco Premier Partner www.netcginc.com (415) 750-3800 Fax: 750-3900 __ CCIE Security Training: www.netcginc.com/training.htm CCIE Routing/Switching Training www.ccbootcamp.com George Murphy CCNP, CCDP wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi Folks, I am seeking advice on materials for the CCIE written and lab exams. I have been considering the McGraw Hill All-In-One CCIE study guide as well as their CCIE Lab Practice Kit. I have been watching the published dates of these and considering that as a factor but would appreciate any suggestions or feedback from anyone who has found any of the resources available out there to be the best (CCPrep, Boson etc, etc). I have also read reviews on each one but value responses from this list more. Thanks for any assistance. Nondisclosure violations to [EMAIL PROTECTED] -BEGIN PGP SIGNATURE- Version: PGPfreeware 6.5.8 for non-commercial use iQA/AwUBO3sEWTeIsyIIPGJPEQJF5gCfZoACVevzTBrxMWgWKKIcBMmrgMYAn1li D20MZFX3WX2m7NcwDOyHb6SA =0IjA -END PGP SIGNATURE- Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16235t=16196 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Best Materials For CCIE Written and Lab Exams [7:16196]
Sounds great Dennis. Thanks for including me. I will check into it and see if I can fit it in with the boss. It seems like an excellent way to prepare and I have heard a lot of positive things about CCBootcamp. Dennis Laganiere wrote: Why don't you join us in Detroit in September? We're going to do a three-day marathon study session for the written exam. Two days of directed lecture, a mock exam the morning of the third day, and in the afternoon, everybody takes the actual exam. CCBootCamp is hosting it, and you can find the details on their page... --- Dennis -Original Message- From: George Murphy CCNP, CCDP [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 15, 2001 9:31 AM To: [EMAIL PROTECTED] Subject: Best Materials For CCIE Written and Lab Exams [7:16196] Hi Folks, I am seeking advice on materials for the CCIE written and lab exams. I have been considering the McGraw Hill All-In-One CCIE study guide as well as their CCIE Lab Practice Kit. I have been watching the published dates of these and considering that as a factor but would appreciate any suggestions or feedback from anyone who has found any of the resources available out there to be the best (CCPrep, Boson etc, etc). I have also read reviews on each one but value responses from this list more. Thanks for any assistance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16255t=16196 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ISDN Simulator [7:16212]
Has anyone had experience with this isdn simulator? Would you rate it on the same line as the Emutel and Teltone? http://cgi.ebay.com/aw-cgi/eBayISAPI.dll?ViewItemitem=1264979437 Thanks Paul C Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16212t=16212 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
LANE IP problem [7:16257]
Hi All, I have a problem with configuring LANE on: Cisco 3600 router - Marconi ATM switch - Catalyst 5000 LAN switch with a LANE module. The config for the Marconi switch has been done by someone that knows the equipment config, and I know that part is correct. The 3640 router has ATM mode and I used the configs from: http://www.cisco.com/univercd/cc/td/doc/product/atm/c8540/12_0/13_19/sw_cnfi g/lane_cnf.htm I only used the ELAN name default, and not eng_elan. The Catalyst 5500 has a SupII, 1*24 port 10/100, and a ATM LANE module installed, agian using the config from above. When looking at the show cdp nei details I can see that the both the router and the LAN switch has layer 2 conection, showing the remote detail and ip info. If I look at the sh lane info on both side look 100% and up. On the 5500 I have also configured the sco interface with an IP and added it to the default VLAN 1. Why do I see the 3640 and the 5500 on either side with the CDP protocol, but I can't ping the other side IP address, using the same subnet?? I can even ping the ATM switch in the middle from the router, but not from the catalyst. What am I missing ? I look all over the CCO and can't find anything more than what I have know. If someone can give me a clue or method to sovle this problem I will be ever thankful ... O yes, I'm doing my lab on the 27th (Aug 01) of this month, so does someone have any last minute tips or any info that would help me pass this lab? Thanks Jacques Allison [EMAIL PROTECTED] ccnp+sec, ccdp, mcse, ase Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16257t=16257 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX static map question [7:15983]
clear xlate to make your changes in affect sequence doesnt matter Best Regards Have A Good Day!! *** Farhan Ahmed* MCSE+I, MCP Win2k, CCDA, CCNA, CSE Network Engineer Mideast Data Systems Abudhabi Uae. *** Privileged/Confidential Information may be contained in this message or Attachments hereto. Please advise immediately if you or your employer do not consent to Internet email for messages of this kind. Opinions, Conclusions and other information in this message that do not relate to the Official business of this company shall be understood as neither given nor Endorsed by it. -Original Message- From: Munzir Khan [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 10:12 AM To: [EMAIL PROTECTED] Subject: RE: PIX static map question [7:15983] Question for MAJDI EVANS just a quick question, Is it really require to restart the pix firewall to take effect the new settings?? another question is defining static map for INSIDE/DMZ/OUTSIDE should be in sequence or it does not mater whatever sequence you make. for example static (inside,outside) 212.x.x.10 192.168.0.30 netmask 255.255.255.255. 0.0 static (inside, DMZ) static (inside) static (inside,outisde) see above it is not in sequence i have the same case, I applied the settings you have suggested but it is not even ping to that IP from outside ... also tell me Conduit need to be also arranged by the Ip addresses ??? please suggest!!! [GroupStudy.com removed an attachment of type application/octet-stream which had a name of Farhan Ahmed.vcf] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16258t=15983 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CONF-REG Decode - Help! [7:16032]
sorry guys, major network outage yesterday to busy to get email... i will send this onto all who hav asked .. also as stated mr EA Louie to my best knowledge passed this on to me (Cheers mate) and i have no idea of the password it is damm usefull thought CU steve From: Ray Smith To: [EMAIL PROTECTED] Subject: Re: CONF-REG Decode - Help! [7:16032] Date: Tue, 14 Aug 2001 14:22:29 -0400 Steven, do you know the password to unprotect this spreadsheet? From: Stephen Skinner Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED], [EMAIL PROTECTED] Subject: Re: CONF-REG Decode - Help! [7:16032] Date: Tue, 14 Aug 2001 17:50:40 + this is an excel spreadsheet which should help you listed the registers and what they do .. if anyone else interested mail me again someon eon list mailed to me think EA Louie or Chuck.. thanks goes to them CU steve From: Ray Smith Reply-To: Ray Smith To: [EMAIL PROTECTED] Subject: CONF-REG Decode - Help! [7:16032] Date: Tue, 14 Aug 2001 11:26:39 -0400 Can anyone point me in the direction of where I can obtain a decent source for figuring out what the hexidecimal values in the config-registers translate to, for example, what does 0x102 do as oppose to 0x12 etc. I really need to know this guys. Thanks Ray _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16261t=16032 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Error while connecting via ISDN [7:16262]
Hello group I am facing a strange problem . I have ISDN connectivity between 2 routers but I am getting errors as under *Mar 1 09:04:30: ISDN BR2/2: EI2 Received when IF is DOWN - Error *Mar 1 09:04:30: ISDN BR2/2: EI2 Received when IF is DOWN - Error *Mar 1 09:04:30: ISDN BR2/2: EI2 Received when IF is DOWN - Error *Mar 1 09:04:30: ISDN BR2/2: EI2 Received when IF is DOWN - Error Can anybody help what could be the reason? Thanks in advance. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16262t=16262 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
cisco [7:16263]
Hello Cisco colleagues, I am preparing for the CCNA exam, but I don't have a non-production router available for practise purposes. Do you know if there is another way to work with and learn the Cisco IOS ? Is there something around like a virtual router ? How did you all prepare for the exam with regard to the IOS ? Thanks for your kind answers in advance ! __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16263t=16263 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Fob ??? [7:16224]
When he asked about it referencing a token, I assumed he was referring to token ring.maybe it's the chain that keeps the token in the ring, otherwise it would fall out and just be plain old ethernet? Drew - Home cc: Sent by: Subject: Re: Fob ??? [7:16224] nobody@groups tudy.com 08/15/2001 09:59 PM Please respond to Drew - Home Does Fob in Key Fob stand for anything when referencing a Token? Weird word/acronym (it)... How on earth is this related to anything that this list is about? Anyway, a fob is a small pocket on the front of a man's pants or vest. I know I have some slacks that still have a fob, but just one or two pair. This was used to hold one's pocket watch in the time when gentelmen carried such things. It later evolved to reference the chain used to hold a pocketwatch (haven't you read the Gift of the Magi?) and then to anything attached to such a chain. So, since we don't generally wear pocketwatches, the fob is now an ornamental (or in this case not so ornamental) attachment to a chain, here being ones keychain. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16264t=16224 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCNP Cisco Networking Acad. questions [7:16180]
Tom; Thanks for the advice. Yes, the many labs with the course is the main reason for my decision to take the class. Also, I'm not sure if I am the best self-study type person :) Doug Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16267t=16180 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
High cpu utilization [7:16268]
4 routers in my company. 2rsm's and 2 3640's are hitting 100% cpu utilization every 40secs or so... we run ip and ipx and the only thing that seems a miss is the ipx forwarder process which is pretty high on all 4 routers. this is the same config we have been using for monthsso its disturbing why its freaking out now! i'm including the output of the show proc cpu on one of the routers. any suggestions will be helpful as my job my depend on this!!! regards, John _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16268t=16268 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: High cpu utilization [7:16268]
Hi John, How is your LAN/WAN traffic during these 100% CPU utilization? Jan John Kale wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... 4 routers in my company. 2rsm's and 2 3640's are hitting 100% cpu utilization every 40secs or so... we run ip and ipx and the only thing that seems a miss is the ipx forwarder process which is pretty high on all 4 routers. this is the same config we have been using for monthsso its disturbing why its freaking out now! i'm including the output of the show proc cpu on one of the routers. any suggestions will be helpful as my job my depend on this!!! regards, John _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16270t=16268 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
AW: cisco [7:16263]
I would say buy the CIM(s) from Cisco. I found them quite cheap actually-I think they are US$69.96 on amazon right now. Getting a router is much more expensive. I find the CIMS are quite good for trying out things that are too expensive for home labs as well, like voice etc. stuart -Urspr|ngliche Nachricht- Von: Jan Huizinga [mailto:[EMAIL PROTECTED]] Gesendet am: Thursday, August 16, 2001 1:18 PM An: [EMAIL PROTECTED] Betreff: Re: cisco [7:16263] Hello Ravi, I know that there is simulation software, but it was expensive as I remember. I also wouldn't advise to use it, try to buy a Cisco somewhere. Nothing beats the real world. good luck, Jan ravi sharma wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello Cisco colleagues, I am preparing for the CCNA exam, but I don't have a non-production router available for practise purposes. Do you know if there is another way to work with and learn the Cisco IOS ? Is there something around like a virtual router ? How did you all prepare for the exam with regard to the IOS ? Thanks for your kind answers in advance ! __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16269t=16263 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: High cpu utilization [7:16268]
i have a problem like this before I use cable modem @home Well i don't see your output My last time is Ip input 100% :-) I cannot know what happen and after all tries I found out my Cable Tv to My Tv Tunner card Cause The Problem ( may be Ip conflict or some thing) . I unplug my Cable Tv and the Cpu go down to 0% It showed me Ip Iput 100% CPU What did your output show?? Jan Huizinga wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi John, How is your LAN/WAN traffic during these 100% CPU utilization? Jan John Kale wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... 4 routers in my company. 2rsm's and 2 3640's are hitting 100% cpu utilization every 40secs or so... we run ip and ipx and the only thing that seems a miss is the ipx forwarder process which is pretty high on all 4 routers. this is the same config we have been using for monthsso its disturbing why its freaking out now! i'm including the output of the show proc cpu on one of the routers. any suggestions will be helpful as my job my depend on this!!! regards, John _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16273t=16268 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809]
That's what I meant Howard. I think I left out a few words as I do that most of the time. I think much quicker than I type. My understanding of this: All computer machines were decimal[base10] until the 40's. Atanasoff was the original one who suggested binary to be used instead of base10 to correct the computational probems that existed in measuring current/voltage. In those days with base10, one was a little current, two was a little more, three a little more than that and so on and so on. It was not a very good way to be accurate and was met with many failures. With the induction of binary for current measureage, it became easy and computers were on their way to being a successful marketing venture. One was on, zero was off. Very simple. But the original idea of the binary counting concept started with Ada. Not in the computer sense, but in a general sense of numbers. Or at least that what I have read. Jenn It could have been that Ada, Lady Lovelace, did invent binary as a means of representation. There's no question that Boolean algebra, and logical binary operations, come from George Boole. I honestly don't know who made the suggestion of binary computer electronics. It had to have taken place before the invention of magnetic core memory, which is binary or, at best, ternary. Before core, there were essentially analog storage devices like specialized CRTs (storage as light) or mercury delay lines (storage as vibrations). Now I'm trying to remember what was the first fully core-based machine. I want to say the ATLAS* in the UK, but I'm not sure. UNIVAC I was commercial, but I don't think it was core based. The first commercial core machine might have been a later UNIVAC or possibly the IBM 701. The IBM 650 -- and I actually worked in the same computer room as one still chugging away before it was successfully emulated -- used a magnetic head-per-track disk (called a drum) as main memory. (It was the first computer that produced the Consumer Price Index, one of those applications that HAD to work). *our UK list members expecially should learn something about the history of the ATLAS, which was done at an English university and pioneered a great number of computer innovations, such as interrupts. It never gets the historical credit it should. -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Sunday, August 05, 2001 4:23 AM To: Jennifer Cribbs; [EMAIL PROTECTED] Subject: RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809] Not serious, but the intellectual credit here goes to George Boole--as in boolean arithmetic. Babbage/Lovelace machines were decimal. At 02:01 PM 8/3/2001 -0400, Jennifer Cribbs wrote: Is this serious? I was under the impression that Ada Lovelace invented the binary counting system. I was also under the impression that John Atanasoff came up with the brilliant coding system that expressed everything in terms of two numbers for the methodology of measuring the current or lack of current in regards to computers way back in the 40's. Before that everyone kept trying to incorporate the base10 system in computers, which was a major headache and unsuccessfull, but that was in the vacuum tube days. hmmm. Surely Microsoft doesn't think they can do this..Maybe this is a joke however and I am just too d*** serious. Jenn Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16272t=14809 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: High cpu utilization [7:16268]
John, You'll need to post it inline can you provide a config ? Phil. --- John Kale wrote: 4 routers in my company. 2rsm's and 2 3640's are hitting 100% cpu utilization every 40secs or so... we run ip and ipx and the only thing that seems a miss is the ipx forwarder process which is pretty high on all 4 routers. this is the same config we have been using for monthsso its disturbing why its freaking out now! i'm including the output of the show proc cpu on one of the routers. any suggestions will be helpful as my job my depend on this!!! regards, John _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp [EMAIL PROTECTED] Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16271t=16268 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: High cpu utilization [7:16268]
Man, if you have IIS servers on the lan or similar, then you are probably hitting Code Red. That could be the assumption, right now. Go to cisco.com and do search on Code Red, there are some documents on that. Regards, Dragi Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16274t=16268 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
blocking PORTS ON PIX!!! [7:16275]
Dear All, I have a question about how to block ports on PIX firewall: my case is: I have mail server working behind PIX so I opened POP3 and SMTP ports for this mail server. my mail server accessed from inside and outside interfaces. I want to limit my internal IP only to work with POP3 using outlook express or any mail client from my mail server and deny any request for POP3 from outside mail servers such as hotmail or yahoo. can I do something like that ??? Please advice me ASAP... here is my shortcut of my PIX conf.: static (inside,outside) 62.21.55.68 10.0.0.21 netmask 255.255.255.255 0 0 access-group acl_in in interface inside conduit permit icmp any any conduit permit tcp host 62.21.55.66 eq smtp any conduit permit tcp host 62.21.55.66 eq pop3 any Regards, Magdy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16275t=16275 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Associate and Professional Email Lists [7:16217]
Answers inline - Original Message - From: Ole Drews Jensen To: Sent: Wednesday, August 15, 2001 2:56 PM Subject: RE: Associate and Professional Email Lists [7:16217] A solution to this could be an application dialog with one or more questions like: How do you connect two 2501's back to back? A) With a big screw B) With a DB60-to-DB60 cable C) With super glue D) Connect pin 18 from serial 0 to the power outlet My answer is A B C What do you also need to do after you have connected them? A) Unmount the LED's B) Shorten all pins in the console interface C) Set clock rate on the router configured as DCE D) Execute the command deltree /y c:\windows My answer is D. That is one of those situationalchoose the tricky answer questions Should the applicant get any of these wrong, he/she would be automatically signed up on the Associate list. I'm just kidding of course, but that would probably take care of at least one side of the problem. P.S. Don't try the last solution in question 2 unless you're sick and tired of Windows. Ole ~~~ Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~ http://www.RouterChief.com ~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~ -Original Message- From: Tom Lisa [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 15, 2001 4:20 PM To: [EMAIL PROTECTED] Subject: Re: Associate and Professional Email Lists [7:16217] Yes, John, there is an Associate list. We have a similar problem there as well. People keep insisting on asking CCNP/CCIE level questions on that list. However, people being the way they are, I doubt we will ever solve the problem completely. But, you got to admit that Paul at least cut down on the volume of CCNA level traffic on this list. Prof. Tom Lisa, CCAI Community College of Southern Nevada Cisco Regional Networking Academy John Neiberger wrote: Excuse me for this rant. I'm not trying to be the content cop, I just wanted to make an observation. Do we no longer have an Associate list as well as the Professional list? We've been getting horrendous numbers of emails lately that simply do not belong on this list. If you don't know how to connect a PC to a router using the console cable or how to connect two routers back-to-back, it seems to me that you should ask those types of questions on the CCNA-level list, not the CCNP-level list. I'm not intending to come down too hard on people asking these questions, I'm just asking that you post to the appropriate list. The Associate mailing list is intended for the simpler questions, while the Professional list is intended for those with slighly more advanced questions. I understand that we tend to grant a *lot* of leeway when it comes to subject matter, but the level of the question should still be appropriate to the list it's posted to. Okay, enough ranting. :-) Back to our regular programming Regards, John [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16276t=16217 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Help.. [7:16278]
Can somebody help me in the following 1) How to write to the Cisco running config via SNMP read-write access ? 2) do i need any software for it and is there a downloadable version i can try ? 3)Can i modify the ACL on the running config Via SNMP i am able to see the config via pingpropack of ipswitch.com I need to do this as i screwed the ACL but the router CANNOT be rebooted. Any help is greatly appreciated. Thanks Sat _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16278t=16278 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cisco [7:16263]
Yes the CIMs are great for the CCNA, I used a number of them and they helped me through the CCNP as well, cheers Pat ravi sharma wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hello Cisco colleagues, I am preparing for the CCNA exam, but I don't have a non-production router available for practise purposes. Do you know if there is another way to work with and learn the Cisco IOS ? Is there something around like a virtual router ? How did you all prepare for the exam with regard to the IOS ? Thanks for your kind answers in advance ! __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16277t=16263 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Bad experiences with IQSale aka Grandstore .. [7:15756]
Well, pass the word around , cause I'm sure a lot of people still don't believe or know how bad they can be !! They are absolutely the worst in integrity !!! If I'm staying in MD, I'll probably go bang on the door or something. Cisco Nuts wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... With due respect.to them...They are the worst!! Phim is absolutely right when he mentions about their bidding practises on Ebay. Infact, I had the sales rep literally yelling at me over the phone.God forbid From: PHIMHONGKONG Reply-To: PHIMHONGKONG To: [EMAIL PROTECTED] Subject: Re: Bad experiences with IQSale aka Grandstore .. [7:15756] Date: Sun, 12 Aug 2001 13:58:48 -0400 they are totaly scam they bid and buy some item on ebay and resell them :-( Jason wrote in message news:[EMAIL PROTECTED]... Thanks. I'm considering that as well based on various advises from others... I'm still looking for feedbacks from those who had bad experiences with them especially on eBay's auction Their tactic seems to be 1. Delay shipment. - Took them 1 week to response with Please provide this information. when I sent them the info in the first email. Then next strategy is my Boss is on vacation in x for two weeks... I cannot get hold of the shipping information. 2. Faulty or wrong items. - This appear to be especially so for those who got a good price on the item on eBay... seems like a way for them to get out of the legally binding deal 3. RMA - a. Ship a different eqpt to the buyer or with missing parts. b. Cliams no other similar item, offer to refund minus shipping and most people tends to agree after such long delays. 4. Delay refund , ask for same information provided on (1). 5. Ignored your mails... I thought I was the only one but it seems like it's happening to everybody that got back to me Jon Krabbenschmidt wrote in message news:[EMAIL PROTECTED]...I would also contact the District Attorney's Office in the area that theyoperate. If you have never contacted a DA's office you may be surprised athow responsive and aggressive they are. Jon -Original Message-From: Jason [mailto:[EMAIL PROTECTED]]Sent: Saturday, August 11, 2001 8:13 AMTo: [EMAIL PROTECTED]Subject: Bad experiences with IQSale aka Grandstore . [7:15756] After talking to a couple of other people, I've found that I'm not the onlyone having problem getting refund from IQSale aka Grandstore , with a coupleof other names For myself, I was promised a refund way back in late May and after numerousemails, on 4th July, promised to get back to me with details on the refundand till today is waiting for the cheque. My emails to them after 4th July was ignored. I'm planning to set up a web pages with testimonies about the problems wehave with this company and also, if it has since been resolved, how long ittook and the steps he or she has to take before the company would resolvethe issue or refund I have filed a complaint with BBB and is considering filing a complaint withUSPS for mail fraud as misconduct and Nondisclosure violations to [EMAIL PROTECTED] Get your FREE download of MSN Explorer at http://explorer.msn.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16260t=15756 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Metro Beta!! [7:16280]
Hi Cisco Champs I am interested in Metro Beta exam. What books should i consider to cover the objectives of that exam. Also if any white papers etc are required and known by u guys. Kidly let me know. Regards Shahid = Shahid Muhammad Shafi Network Engineer Level(3) Communications Inc. MCSE+I/MCSE(Win2K),CNA,CCNA,CCDA,CCNP,CCDP Please help feed hungry people worldwide http://www.hungersite.com/ A small thing each of us can do to help others less fortunate than ourselves __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16280t=16280 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Metro Beta!! [7:16279]
Hi Cisco Champs I am interested in Metro Beta exam. What books should i consider to cover the objectives of that exam. Also if any white papers etc are required and known by u guys. Kidly let me know. Regards Shahid = Shahid Muhammad Shafi Network Engineer Level(3) Communications Inc. MCSE+I/MCSE(Win2K),CNA,CCNA,CCDA,CCNP,CCDP Please help feed hungry people worldwide http://www.hungersite.com/ A small thing each of us can do to help others less fortunate than ourselves __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16279t=16279 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Simulating SNA traffic in a network [7:16247]
A few months ago I posted some configs that configure your routers for APPN. This will allow you to test RSRB and DLSw configs. Is that what you're referring to? If so, look through the archives for APPN and you should find the working configs. You will need an IOS image that allows APPN to do this. HTH, John Raul F. Fernandez 8/15/01 8:53:45 PM Hi Folks, Seems a while I read an e-mail that there maybe some IOS versions which let you simulate SNA traffic. Ifnos does anyone remember or know anything about it? Thank you, Raul Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16281t=16247 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Off the topic [7:16282]
Can anybody point me to a good community like this one that deals with network security issues e.g. design, implementation and troubleshooting. My environment is Win2k on LAN and Cisco 3600 / 2600s on WAN Any assistance will be appreciated _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16282t=16282 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Connecting two Routers through their Serial Interfaces [7:16283]
see the thread: Associate and Professional Email Lists -- Michael Damkot CCNP Technical Trainer Network Support Engineer II Hamid wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi group, Can anyone tell me if it's possible if you want to connect two routers Bach-to Back using their serial interfaces. And if possible how should I configure the serial inetrfaces. Thanks in advace Hamid Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16283t=16283 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Switching question [7:16284]
Hello all. I have a quick question. I am trying to connect to the internet using a switch. I have plug the ethernet cable into port 5 and my lab tops are connected to ports 1 and 3. How do i share the connection using the switch? I know this sounds trivial but I am a newbie at this whole routing stuff. Please let me know Thanks James Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16284t=16284 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Simulating SNA traffic in a network [7:16247]
Thank John, I will do that. Raul - Original Message - From: John Neiberger To: Sent: Thursday, August 16, 2001 10:17 AM Subject: Re: Simulating SNA traffic in a network [7:16247] A few months ago I posted some configs that configure your routers for APPN. This will allow you to test RSRB and DLSw configs. Is that what you're referring to? If so, look through the archives for APPN and you should find the working configs. You will need an IOS image that allows APPN to do this. HTH, John Raul F. Fernandez 8/15/01 8:53:45 PM Hi Folks, Seems a while I read an e-mail that there maybe some IOS versions which let you simulate SNA traffic. Ifnos does anyone remember or know anything about it? Thank you, Raul Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16287t=16247 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: OSPF Distance Vector in the backbone? [7:16120]
The question that's on my mind is where you have an area which has multiple ABRs. Do the internal routers simply compare the metrics to the respective ABRs and make their routing decision based on that comparison? BJ In a totally stubby area, or in a stubby area where there is no explicit inter-area route to the destination, yes. -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 15, 2001 9:44 AM To: [EMAIL PROTECTED] Subject: Re: OSPF Distance Vector in the backbone? [7:16120] While I agree completely with Peter's statements, I think there may be two issues being mingled. Area 0.0.0.0, especially when there are no backbone-only routers, uses a DV-like algorithm to propagate inter-area and exterior routes. There's no use for a Dijkstra. Inside a nonzero area, the Dijkstra algorithm only computes intra-area routes, with a computational workload on the order of the square of the number of routes plus the logarithm of the number of routers. Inter-area and external routes are added to the routing table of that area as a second step, the workload for which is linear with the number of non-intra-area routes. At 08:55 AM 8/15/2001 -0400, you wrote: Hey Ralph, This statement is quite true. Is there an area you wish to break down more fully? For support, see the draft-ietf-ospf-abr-alt-04.txt which includes the following text: In OSPF domains the area topology is restricted so that there must be a backbone area (area 0) and all other areas must have either physical or virtual connections to the backbone. The reason for this star-like topology is that OSPF inter-area routing uses the distance-vector approach and a strict area hierarchy permits avoidance of the counting to infinity problem. OSPF prevents inter-area routing loops by implementing a split-horizon mechanism, allowing ABRs to inject into the backbone only Summary-LSAs derived from the intra-area routes, and limiting ABRs' SPF calculation to consider only Summary-LSAs in the backbone area's link-state database. *** REPLY SEPARATOR *** On 8/15/2001 at 12:12 AM Ralph Fudamak wrote: Question about OSPF and LSA type 3 behavior. Doyle in Routing TCP/IP vol 1: When another router receives a Network Summary LSA from an ABR, it does not run the SPF algorithm. Rather it simply adds the cost of the route to the ABR and the cost included in the LSA. A route to the advertised destination, via the ABR, is entered into the route table along with the calculated cost. This behavior - depending on an intermediate router instead of determining the full route to the destination - is distance vector behavior. So, while OSPF is a link state protocol within an area, it uses a distance vector algorithm to find inter-area routes. (pg 474,475) Please enlighten me. TIA, Ralph Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16288t=16120 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Fob ??? [7:16224]
Does Fob in Key Fob stand for anything when referencing a Token? Weird word/acronym (it)... Well, it is of marginal relevance. Security token generators made by Security Dynamics and others are manufactured in several physical forms. While the credit-card-calculator type is most common, there is a version that can attach to a keychain and is often called a key fob. Since RADIUS and TACACS support Security Dynamics, etc., there is a little relevance. How on earth is this related to anything that this list is about? Anyway, a fob is a small pocket on the front of a man's pants or vest. I know I have some slacks that still have a fob, but just one or two pair. This was used to hold one's pocket watch in the time when gentelmen carried such things. It later evolved to reference the chain used to hold a pocketwatch (haven't you read the Gift of the Magi?) and then to anything attached to such a chain. So, since we don't generally wear pocketwatches, the fob is now an ornamental (or in this case not so ornamental) attachment to a chain, here being ones keychain. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16285t=16224 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Cache Engine [7:16291]
We are looking to implement Cisco's Cache Engine, and I would like to get some of your views on it. Thanks, Sean. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16291t=16291 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: PIX static map question [7:15983]
The only config that needs a restart (that I can think of) is IPSec tunnels so they can authenticate. I've never tried without it but cisco recommended it somewhere in the documentation. Most of the time clear xlate will clear everything right up for you. However, that drops any streaming connections such as telnet passing through the firewall when you do. Then again...so would rebooting ;) - Original Message - From: Munzir Khan To: Sent: Thursday, August 16, 2001 1:11 AM Subject: RE: PIX static map question [7:15983] Question for MAJDI EVANS just a quick question, Is it really require to restart the pix firewall to take effect the new settings?? another question is defining static map for INSIDE/DMZ/OUTSIDE should be in sequence or it does not mater whatever sequence you make. for example static (inside,outside) 212.x.x.10 192.168.0.30 netmask 255.255.255.255. 0.0 static (inside, DMZ) static (inside) static (inside,outisde) see above it is not in sequence i have the same case, I applied the settings you have suggested but it is not even ping to that IP from outside ... also tell me Conduit need to be also arranged by the Ip addresses ??? please suggest!!! Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16292t=15983 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: blocking PORTS ON PIX!!! [7:16275]
Maybe I missed the point of the question, but just don't open POP3 on the outside interface for inbound and that will restrict all outside users from using POP3. Unless inside users pass through the PIX to get to the POP3 server you won't need to add anything to the PIX to allow inside users POP3 (or anything else for that matter). The rest of the configuration for mail server restrictions can be done at the mail server if you want to tighten it down even further for inside users. Hope that helps. Allen - Original Message - From: Magdy H. Ibrahim To: Sent: Thursday, August 16, 2001 7:46 AM Subject: blocking PORTS ON PIX!!! [7:16275] Dear All, I have a question about how to block ports on PIX firewall: my case is: I have mail server working behind PIX so I opened POP3 and SMTP ports for this mail server. my mail server accessed from inside and outside interfaces. I want to limit my internal IP only to work with POP3 using outlook express or any mail client from my mail server and deny any request for POP3 from outside mail servers such as hotmail or yahoo. can I do something like that ??? Please advice me ASAP... here is my shortcut of my PIX conf.: static (inside,outside) 62.21.55.68 10.0.0.21 netmask 255.255.255.255 0 0 access-group acl_in in interface inside conduit permit icmp any any conduit permit tcp host 62.21.55.66 eq smtp any conduit permit tcp host 62.21.55.66 eq pop3 any Regards, Magdy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16290t=16275 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Switching question [7:16284]
The ISP will screw you down to one IP address so you will have to NAT that adress to 2 or more different addresses using a router. Regards, Phil. --- newbie newbie wrote: Hello all. I have a quick question. I am trying to connect to the internet using a switch. I have plug the ethernet cable into port 5 and my lab tops are connected to ports 1 and 3. How do i share the connection using the switch? I know this sounds trivial but I am a newbie at this whole routing stuff. Please let me know Thanks James [EMAIL PROTECTED] Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16289t=16284 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Connecting two Routers through their Serial Interfaces [7:16295]
Back to back cables will do this for you. You can get them from www.pacificcable.com To use it you need to specify a clockrate on the DCE end of the cable. It's pretty straight forward. Works very well in a lab. hth -Russ Hamid wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi group, Can anyone tell me if it's possible if you want to connect two routers Bach-to Back using their serial interfaces. And if possible how should I configure the serial inetrfaces. Thanks in advace Hamid Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16295t=16295 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: blocking PORTS ON PIX!!! [7:16275]
Hi Allen, Actually my point it hot to restrict my outbound POP3 from access the outside mail servers.. I want to block any internal request for external POP3 from accessing that target. you got it?? I hope you may help me in this??? Magdy Allen May wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Maybe I missed the point of the question, but just don't open POP3 on the outside interface for inbound and that will restrict all outside users from using POP3. Unless inside users pass through the PIX to get to the POP3 server you won't need to add anything to the PIX to allow inside users POP3 (or anything else for that matter). The rest of the configuration for mail server restrictions can be done at the mail server if you want to tighten it down even further for inside users. Hope that helps. Allen - Original Message - From: Magdy H. Ibrahim To: Sent: Thursday, August 16, 2001 7:46 AM Subject: blocking PORTS ON PIX!!! [7:16275] Dear All, I have a question about how to block ports on PIX firewall: my case is: I have mail server working behind PIX so I opened POP3 and SMTP ports for this mail server. my mail server accessed from inside and outside interfaces. I want to limit my internal IP only to work with POP3 using outlook express or any mail client from my mail server and deny any request for POP3 from outside mail servers such as hotmail or yahoo. can I do something like that ??? Please advice me ASAP... here is my shortcut of my PIX conf.: static (inside,outside) 62.21.55.68 10.0.0.21 netmask 255.255.255.255 0 0 access-group acl_in in interface inside conduit permit icmp any any conduit permit tcp host 62.21.55.66 eq smtp any conduit permit tcp host 62.21.55.66 eq pop3 any Regards, Magdy Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16293t=16275 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cisco [7:16263]
SIMS are good, but nothing compares to actual equipment. Try these sites... For purchace, you can get good prices on WWW.ebay.com, or buy direct from a reseller at www.iqsale.com. If you dont' have the cash for real equipment use the Mentor Labs - V-labs @ www.mentorlabs.com Their prices are high, but the service is execlent. You get real equipment to use and specific tasks to complete. Hope this helps. Dave Nachman www.davenetworks.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16286t=16263 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCIE written advice [7:16188]
For anybody using the study guide at cramsession.com, I wrote this early in my studying and there were a number of errors. Just to make sure everybody has the right information, here's a list of corrections I've discovered since then: Page 10-11: Delete the entire section on Reliability of Protocols. Page 13: Delete the entire section about rebroadcasting. Page 13: In the section A View of Bridging change ... all devices on a network resided locally. to ... most devices... Also, change bridges to bridges and routers in the next sentence. Page 1516: Both example RIFs should be left-to-right instead of right-to-left. Page 16: The second RIF example should have a length of up to 1,500 bytes. Page 22: Replace the first paragraph of the HSRP description with HSRP provides IP networks with the ability to have a standby router for critical links, allowing a backup router to assume the function of the primary router if an equipment failure were to occur. This should tell you that the router is standing by, not the routing protocol. Page 34: Delete the line IPX Split Horizon is not supported in any of the IPX feature sets from the Routing IPX section. I say delete it, because I can't find confirmation that this is either true or false, and I don't remember where I got it from. If anybody knows for sure, please, let me know. Page 35: Replace the first paragraph about Appletalk with Appletalk is a proprietary protocol developed by Apple Computer that was specifically designed to be simple for the end-user to use. Sorry Apple people, I didn't mean to offend. Page 41: In the ATM section, AAL is described as being the Adoption Layer, when it reality it the Adaption Layer (notice the a in the middle). Page 44: There are two places where PPP should be PAP. Lastly, apparently I have a tendency to use the broadcast WAY too much, so keep an eye out for it (if you find specific instances where I've used it wrong, please let me know so I can pass it along)... I've posted these before, but not everybody goes back to review the archives. Let me know if you find any additional errors, of if I can do anything to help your studies. I passed this exam last year, but I'm starting to study again in preparation for teaching the CCIE Written bootcamp class in Detroit next month. --- Dennis -Original Message- From: Jaspreet Bhatia [mailto:[EMAIL PROTECTED]] Sent: Wednesday, August 15, 2001 11:37 PM To: [EMAIL PROTECTED] Subject: Re: CCIE written advice [7:16188] Patrick, You are right on track .Here is a list of resources that I used to prepare for the CCIE written exam : 1) Book by Caslow 2) Internet routing Arch by Halabi 3) Token Ring paper from www.ccprep.com 4) Jeff Doyle Routing TCP/IP Volume I 5) RIF paper from www.groupstudy.com 6) OSPF Design Guide from CCO 7) Study notes from cramsession.com 8) Exam cram book 9) Boson tests 1,2 and 3 10) CCIE Study guide from www.ccbootcamp.com Wish you all the best ... Jaspreet Bhatia Patrick Donlon wrote: I'm slowly starting to get back into reading for the RS written exam after starting a new job and I've made a rough list of what will guide me too and hopefully through the exam. I've started on Doyle's Routing TCP/IP vol 1, next I've got the Token ring white paper from CCprep and OSPF design guide from CCO, planning on getting CCIE RS Exam cram book and Boson tests 1,2 and maybe 3. Obviously everyone has a different approach to an exam but if there are any major topics I'm missing out on please let me know and also recommendations on the exam preparation book, cheers Pat Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16294t=16188 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: ccna question [7:15958]
next generation test questions: when designing a network, CCNAs should pay particular attention to a) the 80/20 rule b) the 70/30 rule c) the 50/50 rule d) rule Britannia at what layer of the OSI model does the 70/30 rule operate? a) layer 1, because it relates to what bits are where on the wire b) layer 2, because the bits are organized into frames, which use mac addresses c) layer 3, because the 70/30 rule refers to network layer design d) layer 7, because a CCNA needs to apply his/her/its study to real world situations the 70/30 rule is a) the result of extensive study which revealed that the 80/20 rule was in error b) the absolute measure of good design c) the ratio of tab to tip when dining at a fine restaurant d) Moises Alou's eyesight metric hope I get my CCIE before I have to recertify for my CCNA! :- Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Priscilla Oppenheimer Sent: Tuesday, August 14, 2001 9:54 AM To: [EMAIL PROTECTED] Subject: RE: ccna question [7:15958] 70/30? Who made that one up!?! ;-) There's no exact number of course, but folk wisdom was always 80/20. 80% of traffic stays local and 20% goes to a different part of the network. This really got blown out of the water in the last 4-5 years because of Intranets with corporate servers located centrally in server farms, a huge amount of traffic heading out the door to the Internet, VPN and remote-access traffic flowing back in the other way, a lot of AppleTalk and Novell departmental servers being outlawed, etc. Some people have gone so far as to say the equation has switched. 20% is local now and 80% is non-local. You would have to check traffic flows and volume on your own network for a number you could really use. I have never seen 70/30. Is that really what Cisco expects you to learn now? And which do they say is local and which is non-local? Priscilla At 12:42 AM 8/14/01, you wrote: is that 80 local 20 non-local? with Cisco revising the number to 70 local and 30 non-local? I refer to Priscilla Oppenheimer's Top Down Network Design ( don't argue design without it :- ) pp 20-21, the CID book written by Robert Padjen, pp 26-27, and Howard Berkowitz's Designing routing and Switching Architecture wow! ), pages 35 and 575. Yes by all means learn the Cisco answer for the tests. Just remember that Cisco tests in certain respects are not particularly reflective of the real world, as at least three eminent real world experts indicate. Chuck -Original Message- From: Albert Y. Pak [mailto:[EMAIL PROTECTED]] Sent: Monday, August 13, 2001 9:03 PM To: Chuck Larrieu; [EMAIL PROTECTED] Subject: RE: ccna question [7:15958] The current theory is 80/20. However, to pass CCNA exam, the answer is 70/30. ;-) HTH Albert -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chuck Larrieu Sent: Monday, August 13, 2001 11:31 PM To: [EMAIL PROTECTED] Subject: RE: ccna question [7:15958] much as I hate to pass this one, because every response will hit the moderator's queue (x is a forbidden word), I thought this an honest question and that you were entitled to an answer. 80/20 or 70/30 what? are you referring to the old 80 percent of your LAN traffic should be local, and 20 percent should be non-local rule of good design? I haven't seen the recent Cisco study materials, but from other reading, I believe that current theory is that you can't go by this rule any longer. Internet access, shared services, centralized server farms, intranets, all have kinda blown all this local traffic versus non-local traffic percentages by the wayside. to transform a phrase of Brian Eno's - the one Scott McNealy probably stole. I know I sure did - the world is now the LAN. Chuck Eno: the recording studio is my synthesizer ( circa 1980 ) McNealy: the network is the computer ( circa 1996 ) Me: the telco network is the central office ( circa 1990 ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Manjunath Shivaramaiah Sent: Monday, August 13, 2001 7:46 PM To: [EMAIL PROTECTED] Subject: ccna question [7:15958] hi i have a doubt regarding lan design in ciscoIt is 80/20 or70/30 ..in x and 604-407 books it says it is 70/30...pl help me in this regard... I'm taking ccna exam shortly thanks manjunath.s Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16296t=15958 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Connecting two Routers through their Serial Interfaces [7:16298]
You can get them for less from other sources. Kelly D Griffin, CCDA, CCNA Network Engineer Kg2 Network Design http://kg2.com 877.418.4025 Toll-Free 501.418.4026 Fax -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Russell Lusignan Sent: Thursday, August 16, 2001 10:45 AM To: [EMAIL PROTECTED] Subject: Re: Connecting two Routers through their Serial Interfaces [7:16295] Back to back cables will do this for you. You can get them from www.pacificcable.com To use it you need to specify a clockrate on the DCE end of the cable. It's pretty straight forward. Works very well in a lab. hth -Russ Hamid wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Hi group, Can anyone tell me if it's possible if you want to connect two routers Bach-to Back using their serial interfaces. And if possible how should I configure the serial inetrfaces. Thanks in advace Hamid http://kg2.com 8Mb Flash for Cisco 2500 series routers for $47 16Mb DRAM for Cisco 2500 series routers for $24 Back-to-Back cables starting at $24 Octal cables for Cisco 2509 and 2511 for $28 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16298t=16298 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Switching question [7:16284]
What kind of connection to the internet do you have. Dial-up DSL CM ISDN - Original Message - From: newbie newbie To: Sent: Thursday, August 16, 2001 7:58 AM Subject: Switching question [7:16284] Hello all. I have a quick question. I am trying to connect to the internet using a switch. I have plug the ethernet cable into port 5 and my lab tops are connected to ports 1 and 3. How do i share the connection using the switch? I know this sounds trivial but I am a newbie at this whole routing stuff. Please let me know Thanks James Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16297t=16284 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Error in console port - Cisco 2610 , no keyboard sensing ?? [7:16299]
Hi , I am facing an error in my Cisco 2610 , as soon as I swictch on my router and connect my console port to the serial port of my computer , the flash loads itself perfectly , but the console port is not accepting any commands from the keyboard at all . ALl the interfaces of the router are working perfectly as it shows the interface as coming up . I am not able to break into the console port and some to the rommon mode as well . I have checked the flash and the RAM , they both are working fine , the problem seems to be of the console port not accepting any command from the keyboard , the problem is coming with the hyper terminal of other computers as well on connecting with this router . Please guide me how I may proceed with fixing this issue ?? thanks, Navin Parwal Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16299t=16299 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Cisco Cache Engine [7:16291]
I'm not convinced, although I believe ours has been set up badly. In fact I switched it off and got a faster connection. I would look deeper into it but I've got a PIX to play with before I leave. Can memory on a server be segmented off to deal with caching web hits ? I spoke with my mate, a Gold Partner and he was surprised we had installed it here, though he didn't say why. So I'm thinking they are not so popular ??? We were using WCCP v.1 though so I cannot speak for version 2. Phil. --- Sean Graham wrote: We are looking to implement Cisco's Cache Engine, and I would like to get some of your views on it. Thanks, Sean. [EMAIL PROTECTED] Do You Yahoo!? Get your free @yahoo.co.uk address at http://mail.yahoo.co.uk or your free @yahoo.ie address at http://mail.yahoo.ie Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16300t=16291 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Cache Engine [7:16291]
I recently posted a question requesting some information from the group on those devices and received nothing. I have a CDM-4630 and four Content Engine 507's on my desktop and am trying to configure them now. I'll keep you updated on what I learn and problems I run into. So far, it's only been problems. Makes you appreciate the CLI that's for sure. Tony Esfeld Valor Telecom -Original Message- From: Sean Graham [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 10:24 AM To: [EMAIL PROTECTED] Subject: Cisco Cache Engine [7:16291] We are looking to implement Cisco's Cache Engine, and I would like to get some of your views on it. Thanks, Sean. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16301t=16291 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Frame Switch Configuration Question [7:16303]
Hey guys, I am setting up a lab with:- HeadQ= DLCI 101 router A = DLCI 102 router B = DLCI 103 router C = DLCI 104 The switch interfaces are s0, s1, s2, and s3. My configuration for the switch is as follows:- Frame-Switch# frame-relay switching int S0 no ip address encapsulation frame-relay clockrate 64000 frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 101 int s3 102 int s1 no ip address encapsulation frame-relay clockrate 64000 frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 104 int s2 103 int s2 no ip address encapsulation frame-relay clockrate 64000 frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 103 int s1 104 int s3 no ip address encapsulation frame-relay clockrate 64000 frame-relay lmi-type ansi frame-relay intf-type dce frame-relay route 102 int s0 101 Am I on the the right track or am I missing a few route statement. I am not sure and have some doubts, could someone shed some light here? Thanks _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16303t=16303 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Error in console port - Cisco 2610 , no keyboard sensing ?? [7:16304]
Try to change the flowcontrol from hardware to none on your hyper terminal. Hth, Ole ~~~ Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~ http://www.RouterChief.com ~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~ -Original Message- From: NKP [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 11:02 AM To: [EMAIL PROTECTED] Subject: Error in console port - Cisco 2610 , no keyboard sensing ?? [7:16299] Hi , I am facing an error in my Cisco 2610 , as soon as I swictch on my router and connect my console port to the serial port of my computer , the flash loads itself perfectly , but the console port is not accepting any commands from the keyboard at all . ALl the interfaces of the router are working perfectly as it shows the interface as coming up . I am not able to break into the console port and some to the rommon mode as well . I have checked the flash and the RAM , they both are working fine , the problem seems to be of the console port not accepting any command from the keyboard , the problem is coming with the hyper terminal of other computers as well on connecting with this router . Please guide me how I may proceed with fixing this issue ?? thanks, Navin Parwal Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16304t=16304 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: PIX static map question [7:15983]
With regards to reload - almost never required, a good wr mem and sometimes a clear xlate . With regards to ordering - within an individual portion they are just sorted by order of entry ... With regards to ping-ability - you have not listed a conduit permitting ping ... so by default it is blocked . Thanks! TJ - Original Message - From: Munzir Khan To: Sent: Thursday, August 16, 2001 1:11 AM Subject: RE: PIX static map question [7:15983] Question for MAJDI EVANS just a quick question, Is it really require to restart the pix firewall to take effect the new settings?? another question is defining static map for INSIDE/DMZ/OUTSIDE should be in sequence or it does not mater whatever sequence you make. for example static (inside,outside) 212.x.x.10 192.168.0.30 netmask 255.255.255.255. 0.0 static (inside, DMZ) static (inside) static (inside,outisde) see above it is not in sequence i have the same case, I applied the settings you have suggested but it is not even ping to that IP from outside ... also tell me Conduit need to be also arranged by the Ip addresses ??? please suggest!!! ** The information in this email is confidential and may be legally privileged. It is intended solely for the addressee. Access to this email by anyone else is unauthorized. If you are not the intended recipient, any disclosure, copying, distribution or any action taken or omitted to be taken in reliance on it, is prohibited and may be unlawful. When addressed to our clients any opinions or advice contained in this email are subject to the terms and conditions expressed in the governing KPMG client engagement letter. ** Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16307t=15983 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809]
In ancient India, binary numbers were used in music to classify meters. African bush tribes sent messages via a combination of high and low pitches. Australian aborigines and New Guinea Tribesman counted by two's. In 1666, Gottfried Wilhelm Leibniz wrote the essay De Arte Combinatoria which laid a method for expressing all things in the law of thought with precision mathematics, including binary numbers. After reading the Chinese Book of Changes, or I Ching, he refined his work and came to believe that binary numbers represented Creation, the number one portraying God, and zero depicting the Void. In the 19th Century, British mathematician George Boole invented the system of symbolic logic call Boolean algebra. In 1867, Charles Sanders Peirce introduced Boolean algebra to the United States. In 1936, Claude Shannon, may he RIP, bridged the gap between algebraic theory and practical application. At least that's what I read on the Internet, so it must be true!? ;-) Priscilla P.S. I don't think the UNIVAC I was core either. At 08:34 AM 8/16/01, Howard C. Berkowitz wrote: That's what I meant Howard. I think I left out a few words as I do that most of the time. I think much quicker than I type. My understanding of this: All computer machines were decimal[base10] until the 40's. Atanasoff was the original one who suggested binary to be used instead of base10 to correct the computational probems that existed in measuring current/voltage. In those days with base10, one was a little current, two was a little more, three a little more than that and so on and so on. It was not a very good way to be accurate and was met with many failures. With the induction of binary for current measureage, it became easy and computers were on their way to being a successful marketing venture. One was on, zero was off. Very simple. But the original idea of the binary counting concept started with Ada. Not in the computer sense, but in a general sense of numbers. Or at least that what I have read. Jenn It could have been that Ada, Lady Lovelace, did invent binary as a means of representation. There's no question that Boolean algebra, and logical binary operations, come from George Boole. I honestly don't know who made the suggestion of binary computer electronics. It had to have taken place before the invention of magnetic core memory, which is binary or, at best, ternary. Before core, there were essentially analog storage devices like specialized CRTs (storage as light) or mercury delay lines (storage as vibrations). Now I'm trying to remember what was the first fully core-based machine. I want to say the ATLAS* in the UK, but I'm not sure. UNIVAC I was commercial, but I don't think it was core based. The first commercial core machine might have been a later UNIVAC or possibly the IBM 701. The IBM 650 -- and I actually worked in the same computer room as one still chugging away before it was successfully emulated -- used a magnetic head-per-track disk (called a drum) as main memory. (It was the first computer that produced the Consumer Price Index, one of those applications that HAD to work). *our UK list members expecially should learn something about the history of the ATLAS, which was done at an English university and pioneered a great number of computer innovations, such as interrupts. It never gets the historical credit it should. -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Sunday, August 05, 2001 4:23 AM To: Jennifer Cribbs; [EMAIL PROTECTED] Subject: RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809] Not serious, but the intellectual credit here goes to George Boole--as in boolean arithmetic. Babbage/Lovelace machines were decimal. At 02:01 PM 8/3/2001 -0400, Jennifer Cribbs wrote: Is this serious? I was under the impression that Ada Lovelace invented the binary counting system. I was also under the impression that John Atanasoff came up with the brilliant coding system that expressed everything in terms of two numbers for the methodology of measuring the current or lack of current in regards to computers way back in the 40's. Before that everyone kept trying to incorporate the base10 system in computers, which was a major headache and unsuccessfull, but that was in the vacuum tube days. hmmm. Surely Microsoft doesn't think they can do this..Maybe this is a joke however and I am just too d*** serious. Jenn Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16308t=14809 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Cache Engine [7:16291]
We use ce-590's a in several places. We're using WCCP v2, so our routers must run at least 12.0(11). The 2.1 code is has had a lot of problems. We've upgraded all of ours to 2.51. We're waiting for the release of the Ruby code (4.1). There will be a lot more features available in it, as well as a lot of bugs fixes. At this time we only cache http, but we average around 40% hits. This equates to about saving 10% of our back haul. The cache servers ahave worked great for us. A service such as Cidera can give you a 22mb. satellite feed, where your cache server can easily get hot content with out traversing the internet, further saving you bandwidth and delay, for a very small fee of course. Joe Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16305t=16291 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: 7200 and Memory [7:15928]
My question again to be more clear. I have here a Cisco 7204VXR with voice capability, which is having memory problems. I have 64Mbytes off memory and the show memory reports: - #show version . . . cisco 7204VXR (NPE300) processor (revision D) with 40960K/24576K bytes of memory. . . . As you can see there are 40960K for system memory. But the command show process memory reports: - #show process memory Total: 13976896, Used: 13688808, Free: 288088 . . . . . . -- As you can see there are ONLY 13,976,896 of memory. Where is the remaining 27Mbytes of memory?? Thanks in advance. - Eng. Paulo Roque Network Engineer Cisco Certified Network Associate [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16309t=15928 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Routers and Radius Authentication [7:16310]
I'm trying to configure Cisco routers (7206,3662, 2600, etc...) to use Radius authentication. I'd like the authenticated user(s) to either be dropped directly into enable mode or left only at the telnet prompt based on their authority (defined by the Radius server). I'm assuming this involves two levels of AAA. Authentication and Authorization. I have been able to configure a 3662 (Version 12.2(2)T) to allow authentication and leave the logged on user at an enable prompt without requiring the user to enter the 'enable' command. What I am unable to get to work properly is the latter part of my requirement. i.e. those without authority to enable mode only get the telnet prompt and view access to the router. Any suggestions on how to allow this configuration? Here's my configuration; -- -- Radiator Radius is my radius server. Cisco router: - aaa new-model aaa authentication login default group radius enable aaa authentication enable default group radius enable aaa authorization exec default group radius local radius-server host 200.x.x.x auth-port 1645 acct-port 1646 key 7 radius-server retransmit 3 -- David A. Lauer IFX Communications Ventures Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16310t=16310 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCIE Written [7:15832]
I did not see any question on the following even though I spent lot of time reading them. LAT DECnet Apollo Banyan VINES ISO CLNS XNS Ola Shusi - Original Message - From: McMasters, Eric To: Sent: Tuesday, August 14, 2001 8:29 AM Subject: RE: CCIE Written [7:15832] These topic were removed from the lab, not the written. These topics could still appear on the written exam. Hope this clears things up! Eric -Original Message- From: Kenneth Yeung [mailto:[EMAIL PROTECTED]] Sent: Monday, August 13, 2001 11:47 PM To: [EMAIL PROTECTED] Subject: RE: CCIE Written [7:15832] Just read Cisco web: Effective immediately, the following topics have been removed from the lab exam content: LAT DECnet Apollo Banyan VINES ISO CLNS XNS ATM LANE X.25 Do anyone see any questions above in the written CCIE exam? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16311t=15832 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: blocking PORTS ON PIX!!! [7:16275]
Well, by default your internal devices will be able to access anything on the outside. You don't need to open a port for that. Allen is correct in just shutting down the port. Michael Le --- Magdy H. Ibrahim wrote: Hi Allen, Actually my point it hot to restrict my outbound POP3 from access the outside mail servers.. I want to block any internal request for external POP3 from accessing that target. you got it?? I hope you may help me in this??? Magdy Allen May wrote in message [EMAIL PROTECTED]">news:[EMAIL PROTECTED]... Maybe I missed the point of the question, but just don't open POP3 on the outside interface for inbound and that will restrict all outside users from using POP3. Unless inside users pass through the PIX to get to the POP3 server you won't need to add anything to the PIX to allow inside users POP3 (or anything else for that matter). The rest of the configuration for mail server restrictions can be done at the mail server if you want to tighten it down even further for inside users. Hope that helps. Allen - Original Message - From: Magdy H. Ibrahim To: Sent: Thursday, August 16, 2001 7:46 AM Subject: blocking PORTS ON PIX!!! [7:16275] Dear All, I have a question about how to block ports on PIX firewall: my case is: I have mail server working behind PIX so I opened POP3 and SMTP ports for this mail server. my mail server accessed from inside and outside interfaces. I want to limit my internal IP only to work with POP3 using outlook express or any mail client from my mail server and deny any request for POP3 from outside mail servers such as hotmail or yahoo. can I do something like that ??? Please advice me ASAP... here is my shortcut of my PIX conf.: static (inside,outside) 62.21.55.68 10.0.0.21 netmask 255.255.255.255 0 0 access-group acl_in in interface inside conduit permit icmp any any conduit permit tcp host 62.21.55.66 eq smtp any conduit permit tcp host 62.21.55.66 eq pop3 any Regards, Magdy [EMAIL PROTECTED] __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16312t=16275 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809]
You know, you remind me of an argument I always have with Pete Welcher: is the student population binary-literate? If for no other reason, I will point ou the significance of a one expressed as a raised middle finger, as opposed to a raised fist as a zero. Admittedly, there are variants, just as there are different storage devices. A single upraised little finger is reserved for those who don't deserve the very best. A middle finger extended but held horizontally is for the horse you rode in on. The horizontal middle finger moving up and down in a sinusoidal pattern suggests this is for the kangaroo that you came in with.: In ancient India, binary numbers were used in music to classify meters. African bush tribes sent messages via a combination of high and low pitches. Australian aborigines and New Guinea Tribesman counted by two's. In 1666, Gottfried Wilhelm Leibniz wrote the essay De Arte Combinatoria which laid a method for expressing all things in the law of thought with precision mathematics, including binary numbers. After reading the Chinese Book of Changes, or I Ching, he refined his work and came to believe that binary numbers represented Creation, the number one portraying God, and zero depicting the Void. In the 19th Century, British mathematician George Boole invented the system of symbolic logic call Boolean algebra. In 1867, Charles Sanders Peirce introduced Boolean algebra to the United States. In 1936, Claude Shannon, may he RIP, bridged the gap between algebraic theory and practical application. At least that's what I read on the Internet, so it must be true!? ;-) Priscilla P.S. I don't think the UNIVAC I was core either. At 08:34 AM 8/16/01, Howard C. Berkowitz wrote: That's what I meant Howard. I think I left out a few words as I do that most of the time. I think much quicker than I type. My understanding of this: All computer machines were decimal[base10] until the 40's. Atanasoff was the original one who suggested binary to be used instead of base10 to correct the computational probems that existed in measuring current/voltage. In those days with base10, one was a little current, two was a little more, three a little more than that and so on and so on. It was not a very good way to be accurate and was met with many failures. With the induction of binary for current measureage, it became easy and computers were on their way to being a successful marketing venture. One was on, zero was off. Very simple. But the original idea of the binary counting concept started with Ada. Not in the computer sense, but in a general sense of numbers. Or at least that what I have read. Jenn It could have been that Ada, Lady Lovelace, did invent binary as a means of representation. There's no question that Boolean algebra, and logical binary operations, come from George Boole. I honestly don't know who made the suggestion of binary computer electronics. It had to have taken place before the invention of magnetic core memory, which is binary or, at best, ternary. Before core, there were essentially analog storage devices like specialized CRTs (storage as light) or mercury delay lines (storage as vibrations). Now I'm trying to remember what was the first fully core-based machine. I want to say the ATLAS* in the UK, but I'm not sure. UNIVAC I was commercial, but I don't think it was core based. The first commercial core machine might have been a later UNIVAC or possibly the IBM 701. The IBM 650 -- and I actually worked in the same computer room as one still chugging away before it was successfully emulated -- used a magnetic head-per-track disk (called a drum) as main memory. (It was the first computer that produced the Consumer Price Index, one of those applications that HAD to work). *our UK list members expecially should learn something about the history of the ATLAS, which was done at an English university and pioneered a great number of computer innovations, such as interrupts. It never gets the historical credit it should. -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Sunday, August 05, 2001 4:23 AM To: Jennifer Cribbs; [EMAIL PROTECTED] Subject: RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809] Not serious, but the intellectual credit here goes to George Boole--as in boolean arithmetic. Babbage/Lovelace machines were decimal. At 02:01 PM 8/3/2001 -0400, Jennifer Cribbs wrote: Is this serious? I was under the impression that Ada Lovelace invented the binary counting system. I was also under the impression that John Atanasoff came up with the brilliant coding system that expressed everything in terms of two numbers for the methodology of measuring the current or lack of current in regards to computers way back in the 40's. Before that everyone kept trying to incorporate the base10 system in computers,
Re: 7200 and Memory [7:15928]
Thank you David, I have just tried this solution. But I have two problem yet. 1 - Where is my memory? 2 - This IOS ( Version 12.1(3a)T3 ) doesn4t suport the memory-size command. Paulo - Original Message - From: Cooper, David To: 'Paulo Roque' Sent: Thursday, August 16, 2001 3:51 PM Subject: RE: 7200 and Memory [7:15928] you can use the memory-size iomem 25 to dedicate a certain amount (25%) for you processes. requires a reboot but it helps... Dave Cooper Cisco/Bay Network Engineer NetSolve Inc. 12331 Riata Trace Parkway Austin, TX 78727 (email) [EMAIL PROTECTED] CCNP - Routing and Switching CCDP - Routing and Switching CSS1- Cisco Security Specialist 1 NNCSS- Nortel Networks Certified Support Specialist Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16314t=15928 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Friday Funnie #2, Couldn't let this one go by!! [7:14809]
Actually, If I remember correctly, he read the Japanese book of change... called Cha-Ching, which sold millions of copies, and was one of the biggest money makers for the publishing company... Which is also why we refer to making alot of money as Cha Ching(as in the cash register door opening..). This is where he discovered that One, meaning full, and zero, of course being very empty!! And they bridged the gap for algebra? Damn im out of the loop - Original Message - From: Priscilla Oppenheimer To: Sent: Thursday, August 16, 2001 12:13 PM Subject: RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809] In ancient India, binary numbers were used in music to classify meters. African bush tribes sent messages via a combination of high and low pitches. Australian aborigines and New Guinea Tribesman counted by two's. In 1666, Gottfried Wilhelm Leibniz wrote the essay De Arte Combinatoria which laid a method for expressing all things in the law of thought with precision mathematics, including binary numbers. After reading the Chinese Book of Changes, or I Ching, he refined his work and came to believe that binary numbers represented Creation, the number one portraying God, and zero depicting the Void. In the 19th Century, British mathematician George Boole invented the system of symbolic logic call Boolean algebra. In 1867, Charles Sanders Peirce introduced Boolean algebra to the United States. In 1936, Claude Shannon, may he RIP, bridged the gap between algebraic theory and practical application. At least that's what I read on the Internet, so it must be true!? ;-) Priscilla P.S. I don't think the UNIVAC I was core either. At 08:34 AM 8/16/01, Howard C. Berkowitz wrote: That's what I meant Howard. I think I left out a few words as I do that most of the time. I think much quicker than I type. My understanding of this: All computer machines were decimal[base10] until the 40's. Atanasoff was the original one who suggested binary to be used instead of base10 to correct the computational probems that existed in measuring current/voltage. In those days with base10, one was a little current, two was a little more, three a little more than that and so on and so on. It was not a very good way to be accurate and was met with many failures. With the induction of binary for current measureage, it became easy and computers were on their way to being a successful marketing venture. One was on, zero was off. Very simple. But the original idea of the binary counting concept started with Ada. Not in the computer sense, but in a general sense of numbers. Or at least that what I have read. Jenn It could have been that Ada, Lady Lovelace, did invent binary as a means of representation. There's no question that Boolean algebra, and logical binary operations, come from George Boole. I honestly don't know who made the suggestion of binary computer electronics. It had to have taken place before the invention of magnetic core memory, which is binary or, at best, ternary. Before core, there were essentially analog storage devices like specialized CRTs (storage as light) or mercury delay lines (storage as vibrations). Now I'm trying to remember what was the first fully core-based machine. I want to say the ATLAS* in the UK, but I'm not sure. UNIVAC I was commercial, but I don't think it was core based. The first commercial core machine might have been a later UNIVAC or possibly the IBM 701. The IBM 650 -- and I actually worked in the same computer room as one still chugging away before it was successfully emulated -- used a magnetic head-per-track disk (called a drum) as main memory. (It was the first computer that produced the Consumer Price Index, one of those applications that HAD to work). *our UK list members expecially should learn something about the history of the ATLAS, which was done at an English university and pioneered a great number of computer innovations, such as interrupts. It never gets the historical credit it should. -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Sunday, August 05, 2001 4:23 AM To: Jennifer Cribbs; [EMAIL PROTECTED] Subject: RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809] Not serious, but the intellectual credit here goes to George Boole--as in boolean arithmetic. Babbage/Lovelace machines were decimal. At 02:01 PM 8/3/2001 -0400, Jennifer Cribbs wrote: Is this serious? I was under the impression that Ada Lovelace invented the binary counting system. I was also under the impression that John Atanasoff came up with the brilliant coding system that expressed everything in terms of two numbers for the methodology of measuring the current or lack of current in regards to computers way back in the 40's. Before that everyone kept trying to
PIX Sh conn question [7:16316]
Greetings all, Does anyone know what the heck the flags mean at the end of sh conn? TCP out xxx.xxx.xxx.xxx:524 in xxx.xxx.xxx.xxx:1045 idle 0:08:48 Bytes 4592 flags UIO TCP out xxx.xxx.xxx.xxx:80 in xxx.xxx.xxx.xxx:1765 idle 0:02:02 Bytes 33607 flags UFRIO UDP out xxx.xxx.xxx.xxx:46320 in xxx.xxx.xxx.xxx:1027 idle 0:00:18 flags dD these are few examples, I didn't list all of them. Thanks, Nabil Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16316t=16316 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCDP Requirement [7:16317]
Hi All, Can anybody pls. state the requirement to become a CCDP after CCNP ? My confusion is whether one needs to pass only CID or both and CID and CCDA. Any assistance will be greately apppreciated. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16317t=16317 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Cisco Secure ACS for NT/2000 [7:16318]
Does anyone have any experience good or bad with Cisco Secure Access Control for Windows NT/2000? Are there any gottchas that I need to be aware of? I am trying to get approval to purchase this product but managment wants me to get opinions from someone else besides Cisco. Thanks, Harles Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16318t=16318 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: CCDP Requirement [7:16317]
You can find the info here (watch for word wrap): http://www.cisco.com/warp/public/10/wwtraining/certprog/lan2/programs/ccdp.h tml You need to pass the following exams to become a CCDP: - CCNA - CCDA - BSCN or BSCI - BCMSN - BCRAN - CID * Instead of the exams above starting with B, you can take Foundation. Hth, Ole ~~~ Ole Drews Jensen Systems Network Manager CCNA, MCSE, MCP+I RWR Enterprises, Inc. [EMAIL PROTECTED] ~~~ http://www.RouterChief.com ~~~ NEED A JOB ??? http://www.oledrews.com/job ~~~ -Original Message- From: Zahid Hassan [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 3:43 PM To: [EMAIL PROTECTED] Subject: CCDP Requirement [7:16317] Hi All, Can anybody pls. state the requirement to become a CCDP after CCNP ? My confusion is whether one needs to pass only CID or both and CID and CCDA. Any assistance will be greately apppreciated. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16319t=16317 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCDP Requirement [7:16317]
both CCDA and CID - Original Message - From: Zahid Hassan To: Sent: Thursday, August 16, 2001 4:42 PM Subject: CCDP Requirement [7:16317] Hi All, Can anybody pls. state the requirement to become a CCDP after CCNP ? My confusion is whether one needs to pass only CID or both and CID and CCDA. Any assistance will be greately apppreciated. Zahid Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16320t=16317 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
CCNP Switching and Multicast [7:16321]
Group, I am studying for CCNP Switching and have come across 2 chapters of multicast. Multicast could get very tricky and in depth. The best and worst things about Cisco Press is the level of detail they get into. They give you more detail than you need for the exam (which is great becuase you really learn the processes inside out) so it is hard to tell how much of it you need to know. This is the opposite of Lammle's books becuase they don't give enough detail and are ready for the garbage can after you finish your exams (useless as an on the job reference guide). My question is how much in depth the exam is on the topic of multicasting. Thanks for the help. SAM SNEED Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16321t=16321 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809]
My understanding is that the reason they used binary was because the first computers used switches. Either the switch was on or off. -Original Message- From: Guy Russell [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 1:02 PM To: [EMAIL PROTECTED] Subject: Re: Friday Funnie #2, Couldn't let this one go by!! [7:14809] Actually, If I remember correctly, he read the Japanese book of change... called Cha-Ching, which sold millions of copies, and was one of the biggest money makers for the publishing company... Which is also why we refer to making alot of money as Cha Ching(as in the cash register door opening..). This is where he discovered that One, meaning full, and zero, of course being very empty!! And they bridged the gap for algebra? Damn im out of the loop - Original Message - From: Priscilla Oppenheimer To: Sent: Thursday, August 16, 2001 12:13 PM Subject: RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809] In ancient India, binary numbers were used in music to classify meters. African bush tribes sent messages via a combination of high and low pitches. Australian aborigines and New Guinea Tribesman counted by two's. In 1666, Gottfried Wilhelm Leibniz wrote the essay De Arte Combinatoria which laid a method for expressing all things in the law of thought with precision mathematics, including binary numbers. After reading the Chinese Book of Changes, or I Ching, he refined his work and came to believe that binary numbers represented Creation, the number one portraying God, and zero depicting the Void. In the 19th Century, British mathematician George Boole invented the system of symbolic logic call Boolean algebra. In 1867, Charles Sanders Peirce introduced Boolean algebra to the United States. In 1936, Claude Shannon, may he RIP, bridged the gap between algebraic theory and practical application. At least that's what I read on the Internet, so it must be true!? ;-) Priscilla P.S. I don't think the UNIVAC I was core either. At 08:34 AM 8/16/01, Howard C. Berkowitz wrote: That's what I meant Howard. I think I left out a few words as I do that most of the time. I think much quicker than I type. My understanding of this: All computer machines were decimal[base10] until the 40's. Atanasoff was the original one who suggested binary to be used instead of base10 to correct the computational probems that existed in measuring current/voltage. In those days with base10, one was a little current, two was a little more, three a little more than that and so on and so on. It was not a very good way to be accurate and was met with many failures. With the induction of binary for current measureage, it became easy and computers were on their way to being a successful marketing venture. One was on, zero was off. Very simple. But the original idea of the binary counting concept started with Ada. Not in the computer sense, but in a general sense of numbers. Or at least that what I have read. Jenn It could have been that Ada, Lady Lovelace, did invent binary as a means of representation. There's no question that Boolean algebra, and logical binary operations, come from George Boole. I honestly don't know who made the suggestion of binary computer electronics. It had to have taken place before the invention of magnetic core memory, which is binary or, at best, ternary. Before core, there were essentially analog storage devices like specialized CRTs (storage as light) or mercury delay lines (storage as vibrations). Now I'm trying to remember what was the first fully core-based machine. I want to say the ATLAS* in the UK, but I'm not sure. UNIVAC I was commercial, but I don't think it was core based. The first commercial core machine might have been a later UNIVAC or possibly the IBM 701. The IBM 650 -- and I actually worked in the same computer room as one still chugging away before it was successfully emulated -- used a magnetic head-per-track disk (called a drum) as main memory. (It was the first computer that produced the Consumer Price Index, one of those applications that HAD to work). *our UK list members expecially should learn something about the history of the ATLAS, which was done at an English university and pioneered a great number of computer innovations, such as interrupts. It never gets the historical credit it should. -Original Message- From: Howard C. Berkowitz [mailto:[EMAIL PROTECTED]] Sent: Sunday, August 05, 2001 4:23 AM To: Jennifer Cribbs; [EMAIL PROTECTED] Subject: RE: Friday Funnie #2, Couldn't let this one go by!! [7:14809] Not serious, but the intellectual credit here goes to George Boole--as in boolean arithmetic. Babbage/Lovelace machines were decimal. At 02:01 PM 8/3/2001 -0400, Jennifer Cribbs wrote: Is this serious? I was under the impression that Ada Lovelace
was CCNP Switching now CCNP routing [7:16323]
I have been studying for CCNP routing (exam tomorrow!!) and have been using the sybex book, and boson tests. THere is LOTS of questions in the Boson tests that are not covered in the Sybex book. Again, how much do you need to know? I have been using the boson tests as a benchmark, so I guess I need to spend a few hours on the cisco site filling in the gaps. Symon -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of sam sneed Sent: 16 August 2001 22:34 To: [EMAIL PROTECTED] Subject: CCNP Switching and Multicast [7:16321] Group, I am studying for CCNP Switching and have come across 2 chapters of multicast. Multicast could get very tricky and in depth. The best and worst things about Cisco Press is the level of detail they get into. They give you more detail than you need for the exam (which is great becuase you really learn the processes inside out) so it is hard to tell how much of it you need to know. This is the opposite of Lammle's books becuase they don't give enough detail and are ready for the garbage can after you finish your exams (useless as an on the job reference guide). My question is how much in depth the exam is on the topic of multicasting. Thanks for the help. SAM SNEED Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16323t=16323 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: cisco [7:16263]
if you got access to CCO you can access the sim for free Thank You, Donald B Johnson Jr Engineering/Technical Operations Corporate Manager Technical Support Services Adelphia Communications Corp. P# 888-277-6872 support line Pg# 866-690-9276 pager P# 814-260-3259 office F# 814-260-3227 fax [EMAIL PROTECTED] - Original Message - From: Dave Nachman To: Sent: Thursday, August 16, 2001 8:54 AM Subject: Re: cisco [7:16263] SIMS are good, but nothing compares to actual equipment. Try these sites... For purchace, you can get good prices on WWW.ebay.com, or buy direct from a reseller at www.iqsale.com. If you dont' have the cash for real equipment use the Mentor Labs - V-labs @ www.mentorlabs.com Their prices are high, but the service is execlent. You get real equipment to use and specific tasks to complete. Hope this helps. Dave Nachman www.davenetworks.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16306t=16263 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Secure ACS for NT/2000 [7:16318]
It's a great product, well-designed for wireless authentication (ver 2.7). But if you don't need that and want to save $6k, you can set up IAS service on a Win2k server to do RADIUS authentication (maybe TACACS too, didn't check it, though). Arthur Davis CCIE #6430 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16326t=16318 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Secure ACS for NT/2000 [7:16318]
It's a great product, well-designed for wireless authentication (ver 2.7). But if you don't need that and want to save $6k, you can set up IAS service on a Win2k server to do RADIUS authentication (maybe TACACS too, didn't check it, though). Arthur Davis CCIE #6430 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16324t=16318 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Secure ACS for NT/2000 [7:16318]
It's a great product, well-designed for wireless authentication (ver 2.7). But if you don't need that and want to save $6k, you can set up IAS service on a Win2k server to do RADIUS authentication (maybe TACACS too, didn't check it, though). Arthur Davis CCIE #6430 Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16327t=16318 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Hub to Hub through 2600 [7:16328]
Hello, I just received a 2616 router. I set it up through the initial boot screen: SubA - 0/0 10.100.1.1 /16 SubB - 0/1 10.200.1.1 /16 Everything works fine if both interfaces are connected, via straight cable, to a 3Com 10/100 hub. Can ping either interface from either subnet, all machines on each subnet can ping any machine on other subnet. However, when I try to go with two hubs, one for each subnet, I can no longer communicate. Have assured I'm not on uplink, have tried uplink, am sure no problems with hub (new out of box, and working in other configs). If I have both Subs hooked up to one hub, all link lights are green. If I move one of the interfaces to the other hub, no link light. Am I missing something? I'm sure it's something simple but heck if I know. Any help greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16328t=16328 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
ADSL introduction? [7:16329]
Is there any good suggestion on ADSL? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16329t=16329 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Hub to Hub through 2600 [7:16328]
Check the speed on the router interface. Does it match the speed of the hub? Maybe force speed and duplex. -Original Message- From: Sammi [mailto:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 8:27 PM To: [EMAIL PROTECTED] Subject: Hub to Hub through 2600 [7:16328] Hello, I just received a 2616 router. I set it up through the initial boot screen: SubA - 0/0 10.100.1.1 /16 SubB - 0/1 10.200.1.1 /16 Everything works fine if both interfaces are connected, via straight cable, to a 3Com 10/100 hub. Can ping either interface from either subnet, all machines on each subnet can ping any machine on other subnet. However, when I try to go with two hubs, one for each subnet, I can no longer communicate. Have assured I'm not on uplink, have tried uplink, am sure no problems with hub (new out of box, and working in other configs). If I have both Subs hooked up to one hub, all link lights are green. If I move one of the interfaces to the other hub, no link light. Am I missing something? I'm sure it's something simple but heck if I know. Any help greatly appreciated. Report misconduct and Nondisclosure violations to [EMAIL PROTECTED] Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16330t=16328 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Hub to Hub through 2600 [7:16328]
Have you tried moving things around to see if the problem follows any piece of equipment? Maybe a bad cable, bad port on hub, or speed/duplex mismatch. Have you tried rebooting router after adding hub? Do you lose link lights on the hub (and if so, is it just where the router plugs in, or on the workstations?) or the router or both? Could the original hub be caching the MAC of the router port that was plugged into it and think it's still on the original port, instead of moved to another hub? Mark -Original Message- From: Sammi [SMTP:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 9:27 PM To: [EMAIL PROTECTED] Subject:Hub to Hub through 2600 [7:16328] Hello, I just received a 2616 router. I set it up through the initial boot screen: SubA - 0/0 10.100.1.1 /16 SubB - 0/1 10.200.1.1 /16 Everything works fine if both interfaces are connected, via straight cable, to a 3Com 10/100 hub. Can ping either interface from either subnet, all machines on each subnet can ping any machine on other subnet. However, when I try to go with two hubs, one for each subnet, I can no longer communicate. Have assured I'm not on uplink, have tried uplink, am sure no problems with hub (new out of box, and working in other configs). If I have both Subs hooked up to one hub, all link lights are green. If I move one of the interfaces to the other hub, no link light. Am I missing something? I'm sure it's something simple but heck if I know. Any help greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16331t=16328 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ADSL introduction? [7:16329]
be careful who you buy it from, those CLEC's are dropping like flies... - Original Message - From: thinkworker To: Sent: Thursday, August 16, 2001 9:48 PM Subject: ADSL introduction? [7:16329] Is there any good suggestion on ADSL? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16332t=16329 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Dialer Watch on Dialer Profile [7:16333]
Does anyone have any experience succeeding in getting dialer watch to work with dialer profiles? Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16333t=16333 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: CCDP Requirement [7:16317]
after CCNP you need to take CCDA and CID regards, suaveguru --- Zahid Hassan wrote: Hi All, Can anybody pls. state the requirement to become a CCDP after CCNP ? My confusion is whether one needs to pass only CID or both and CID and CCDA. Any assistance will be greately apppreciated. Zahid [EMAIL PROTECTED] __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16334t=16317 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: Hub to Hub through 2600 [7:16328]
I have the router interfaces on full/100, perhaps I'll move it to auto, same as the workstations are. I have moved equipment, swapped cables, haven't seen anything suspicous. I lose link lights on the hub and on the router, just doesn't come back soon's I go to the second hub. I'm not at the office, but I don't believe the hub has cachine capability. I will try putting the interfaces into auto tomorrow, thanks all! On 16 Aug 2001 22:18:56 -0400, [EMAIL PROTECTED] (Mark Monica Baker) wrote: Have you tried moving things around to see if the problem follows any piece of equipment? Maybe a bad cable, bad port on hub, or speed/duplex mismatch. Have you tried rebooting router after adding hub? Do you lose link lights on the hub (and if so, is it just where the router plugs in, or on the workstations?) or the router or both? Could the original hub be caching the MAC of the router port that was plugged into it and think it's still on the original port, instead of moved to another hub? Mark -Original Message- From: Sammi [SMTP:[EMAIL PROTECTED]] Sent: Thursday, August 16, 2001 9:27 PM To:[EMAIL PROTECTED] Subject: Hub to Hub through 2600 [7:16328] Hello, I just received a 2616 router. I set it up through the initial boot screen: SubA - 0/0 10.100.1.1 /16 SubB - 0/1 10.200.1.1 /16 Everything works fine if both interfaces are connected, via straight cable, to a 3Com 10/100 hub. Can ping either interface from either subnet, all machines on each subnet can ping any machine on other subnet. However, when I try to go with two hubs, one for each subnet, I can no longer communicate. Have assured I'm not on uplink, have tried uplink, am sure no problems with hub (new out of box, and working in other configs). If I have both Subs hooked up to one hub, all link lights are green. If I move one of the interfaces to the other hub, no link light. Am I missing something? I'm sure it's something simple but heck if I know. Any help greatly appreciated. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16335t=16328 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Pong Heartbeat [7:16337]
I was interviewing ASP's the other day just before the senior guy went into a shpeal about atomic aggregates, he mentioned we might want to investigate running Pong or since we were using Cisco- Heartbeat. I'm not sure if I'm researching the right areas, but I have found next to nothing on this stuff. Cisco uses the term heartbeat for polling GeoTel equipment Pong has only revealed Atari's early successes with a relatively cheesy video game. Any takers... Thanks Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16337t=16337 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Pong Heartbeat [7:16337]
i think they are referring to Spong do a search for it. of son of pong. you can use it to check problems in your network. -Original Message- From: Circusnuts [SMTP:[EMAIL PROTECTED]] Sent: Friday, 17 August 2001 1:55 pm To: [EMAIL PROTECTED] Subject: Pong Heartbeat [7:16337] I was interviewing ASP's the other day just before the senior guy went into a shpeal about atomic aggregates, he mentioned we might want to investigate running Pong or since we were using Cisco- Heartbeat. I'm not sure if I'm researching the right areas, but I have found next to nothing on this stuff. Cisco uses the term heartbeat for polling GeoTel equipment Pong has only revealed Atari's early successes with a relatively cheesy video game. Any takers... Thanks Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16338t=16337 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Pong Heartbeat [7:16337]
here are some links: http://status.tufts.edu/spong/www-spong.cgi/help http://poseidon.rider.edu/spong/ -Original Message- From: Circusnuts [SMTP:[EMAIL PROTECTED]] Sent: Friday, 17 August 2001 1:55 pm To: [EMAIL PROTECTED] Subject: Pong Heartbeat [7:16337] I was interviewing ASP's the other day just before the senior guy went into a shpeal about atomic aggregates, he mentioned we might want to investigate running Pong or since we were using Cisco- Heartbeat. I'm not sure if I'm researching the right areas, but I have found next to nothing on this stuff. Cisco uses the term heartbeat for polling GeoTel equipment Pong has only revealed Atari's early successes with a relatively cheesy video game. Any takers... Thanks Phil Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16339t=16337 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
Re: ccna question [7:15958]
Don't forget Marcus of Queensbury rules T - Original Message - From: Chuck Larrieu To: Sent: Thursday, August 16, 2001 8:53 AM Subject: RE: ccna question [7:15958] next generation test questions: when designing a network, CCNAs should pay particular attention to a) the 80/20 rule b) the 70/30 rule c) the 50/50 rule d) rule Britannia at what layer of the OSI model does the 70/30 rule operate? a) layer 1, because it relates to what bits are where on the wire b) layer 2, because the bits are organized into frames, which use mac addresses c) layer 3, because the 70/30 rule refers to network layer design d) layer 7, because a CCNA needs to apply his/her/its study to real world situations the 70/30 rule is a) the result of extensive study which revealed that the 80/20 rule was in error b) the absolute measure of good design c) the ratio of tab to tip when dining at a fine restaurant d) Moises Alou's eyesight metric hope I get my CCIE before I have to recertify for my CCNA! :- Chuck -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Priscilla Oppenheimer Sent: Tuesday, August 14, 2001 9:54 AM To: [EMAIL PROTECTED] Subject: RE: ccna question [7:15958] 70/30? Who made that one up!?! ;-) There's no exact number of course, but folk wisdom was always 80/20. 80% of traffic stays local and 20% goes to a different part of the network. This really got blown out of the water in the last 4-5 years because of Intranets with corporate servers located centrally in server farms, a huge amount of traffic heading out the door to the Internet, VPN and remote-access traffic flowing back in the other way, a lot of AppleTalk and Novell departmental servers being outlawed, etc. Some people have gone so far as to say the equation has switched. 20% is local now and 80% is non-local. You would have to check traffic flows and volume on your own network for a number you could really use. I have never seen 70/30. Is that really what Cisco expects you to learn now? And which do they say is local and which is non-local? Priscilla At 12:42 AM 8/14/01, you wrote: is that 80 local 20 non-local? with Cisco revising the number to 70 local and 30 non-local? I refer to Priscilla Oppenheimer's Top Down Network Design ( don't argue design without it :- ) pp 20-21, the CID book written by Robert Padjen, pp 26-27, and Howard Berkowitz's Designing routing and Switching Architecture wow! ), pages 35 and 575. Yes by all means learn the Cisco answer for the tests. Just remember that Cisco tests in certain respects are not particularly reflective of the real world, as at least three eminent real world experts indicate. Chuck -Original Message- From: Albert Y. Pak [mailto:[EMAIL PROTECTED]] Sent: Monday, August 13, 2001 9:03 PM To: Chuck Larrieu; [EMAIL PROTECTED] Subject: RE: ccna question [7:15958] The current theory is 80/20. However, to pass CCNA exam, the answer is 70/30. ;-) HTH Albert -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Chuck Larrieu Sent: Monday, August 13, 2001 11:31 PM To: [EMAIL PROTECTED] Subject: RE: ccna question [7:15958] much as I hate to pass this one, because every response will hit the moderator's queue (x is a forbidden word), I thought this an honest question and that you were entitled to an answer. 80/20 or 70/30 what? are you referring to the old 80 percent of your LAN traffic should be local, and 20 percent should be non-local rule of good design? I haven't seen the recent Cisco study materials, but from other reading, I believe that current theory is that you can't go by this rule any longer. Internet access, shared services, centralized server farms, intranets, all have kinda blown all this local traffic versus non-local traffic percentages by the wayside. to transform a phrase of Brian Eno's - the one Scott McNealy probably stole. I know I sure did - the world is now the LAN. Chuck Eno: the recording studio is my synthesizer ( circa 1980 ) McNealy: the network is the computer ( circa 1996 ) Me: the telco network is the central office ( circa 1990 ) -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Manjunath Shivaramaiah Sent: Monday, August 13, 2001 7:46 PM To: [EMAIL PROTECTED] Subject: ccna question [7:15958] hi i have a doubt regarding lan design in ciscoIt is 80/20 or70/30 ..in x and 604-407 books it says it is 70/30...pl help me in this regard... I'm taking ccna exam shortly thanks manjunath.s Priscilla Oppenheimer http://www.priscilla.com Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16340t=15958 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and
Real world OSPF design dilemma (Longish) [7:16341]
Greetings all, We're converting our 3Com router world to Cisco soon and I have a question regarding the OSPF design. I'm including a link to a JPG in case anyone wants to add their 2 cents. You can see it at: http://members.tripod.com/~bobtimmons/network-1.jpg This is a somewhat simplistic view of our network and the IP's aren't real, but I'm hoping it makes sense regardless. We currently have a full T1 to a frame cloud and our other 2 main buildings are off of that cloud as well, one is 1M, the other is the balance of the T. Both of the remote sites are pointing to the 1 PVC at our main site. My question is, would this OSPF network work? I know the OBAZ, (One Big Area Zero - Wow! My first acronym! - Hey Howard, feel free to use that one), is frowned upon, but that's how my boss wants it, because that's how it is now. Not good logic, but I have to follow orders sometimes. A note: We have other sites off of the main site (Site 1) in another Frame Cloud. It shouldn't affect what we're doing here, though. Also, I didn't include the IPX networks on the Ethernet ports. That's not a real issue right now. Specifically, I'm unsure about using the Loopbacks. We're going to use them for our DLSW (not pictured) links. What I'm unsure about is, can I use these addresses, as given, with their masks, and distribute them via OSPF and have it work? If I'm completely off here, please feel free to let me know. I'm including the proposed configs (snipped) Thanks! Site1 - hostname Site1 ! ip subnet-zero ! dlsw local-peer peer-id 10.10.0.1 dlsw remote-peer 0 frame-relay interface Serial5/0.1 200 dlsw remote-peer 0 frame-relay interface Serial5/0.2 300 ! ipx routing 0002.4a8c.xxx1 ! interface Loopback0 ip address 10.10.0.1 255.255.255.255 no ip directed-broadcast ! interface FastEthernet1/0 ip address 10.10.1.1 255.255.255.0 no ip redirects no ip directed-broadcast ip ospf network broadcast ip ospf dead-interval 60 full-duplex ipx network 1 encapsulation SAP ! interface Serial5/0 no ip address no ip directed-broadcast encapsulation frame-relay IETF no ip mroute-cache no fair-queue frame-relay interface-dlci 100 ! interface Serial5/0.1 multipoint description Frame-Relay to Site2 (DLCI 200) Circuit# 2 ip address 10.10.10.2 255.255.255.252 no ip directed-broadcast ipx network B no arp frame-relay no frame-relay inverse-arp ! interface Serial5/0.2 multipoint description Frame-Relay to Site3 (DLCI 300) Circuit# 3 ip address 10.10.10.6 255.255.255.252 no ip directed-broadcast ipx network C no arp frame-relay no frame-relay inverse-arp ! router ospf 1 network 10.10.0.1 0.0.0.0 area 0.0.0.0 network 10.10.10.1 0.0.0.0 area 0.0.0.0 network 10.10.10.5 0.0.0.0 area 0.0.0.0 network 10.10.1.1 0.0.0.0 area 0.0.0.0 ! ip classless ip default-network 0.0.0.0 no ip http server Site 2 - hostname Site2 ! ip subnet-zero ! dlsw local-peer peer-id 10.10.0.2 dlsw remote-peer 0 frame-relay interface Serial5/0 100 ! ipx routing 0002.4a8c.xxx2 ! interface Loopback0 ip address 10.10.0.2 255.255.255.255 no ip directed-broadcast ! interface FastEthernet1/0 ip address 10.10.2.1 255.255.255.0 no ip redirects no ip directed-broadcast ip ospf network broadcast ip ospf dead-interval 60 full-duplex ipx network 2 encapsulation SAP ! interface Serial5/0 description Frame-Relay to Site1 (DLCI 100) Circuit# 2 ip address 10.10.10.2 255.255.255.252 no ip directed-broadcast encapsulation frame-relay IETF no ip mroute-cache no fair-queue frame-relay interface-dlci 200 ipx network B no arp frame-relay no frame-relay inverse-arp ! router ospf 1 network 10.10.0.2 0.0.0.0 area 0.0.0.0 network 10.10.10.2 0.0.0.0 area 0.0.0.0 network 10.10.2.1 0.0.0.0 area 0.0.0.0 ! ip classless ip default-network 0.0.0.0 no ip http server Site 3 - hostname Site3 ! ip subnet-zero ! dlsw local-peer peer-id 10.10.0.3 dlsw remote-peer 0 frame-relay interface Serial5/0 100 ! ipx routing 0002.4a8c.xxx3 ! interface Loopback0 ip address 10.10.0.3 255.255.255.255 no ip directed-broadcast ! interface FastEthernet1/0 ip address 10.10.3.1 255.255.255.0 no ip redirects no ip directed-broadcast ip ospf network broadcast ip ospf dead-interval 60 full-duplex ipx network 3 encapsulation SAP ! interface Serial5/0 description Frame-Relay to Site 1 (DLCI 100) Circuit# 3 ip address 10.10.10.3 255.255.255.252 no ip directed-broadcast encapsulation frame-relay IETF no ip mroute-cache no fair-queue frame-relay interface-dlci 300 ipx network C no arp frame-relay no frame-relay inverse-arp ! router ospf 1 network 10.10.0.3 0.0.0.0 area 0.0.0.0 network 10.10.10.6 0.0.0.0 area 0.0.0.0 network 10.10.3.1 0.0.0.0 area 0.0.0.0 ! ip classless ip default-network 0.0.0.0 no ip http server Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16341t=16341 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report
Re: Cisco Cache Engine [7:16291]
Works good, lasts a long time Really, I have had good luck with it in transparent mode with WCCP. The other modes I don't know. Tony M. #6172 - Original Message - From: Sean Graham To: Sent: Thursday, August 16, 2001 8:23 AM Subject: Cisco Cache Engine [7:16291] We are looking to implement Cisco's Cache Engine, and I would like to get some of your views on it. Thanks, Sean. Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16342t=16291 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
RE: Cisco Syslog [7:15211]
there is a 3com utility 3cdeamon. It works on win though. martijn watch the name when replying, should be martijnmichiel@ The Syslog Server in 3CDaemon provides the following features: BSD-unix style syslogd functionality. (No RFC here - its a unix thing...) Allows filtering/restriction of syslog messages by IP Address. Allows logging into via message priority, message facility or IP address. Allows viewing of the log files while active, plus copy to clipboard or print Produces standard ASCII text files, suitable for including in emails or faxing. Prints IP address(es) on which it is listening. Why another TFTP Server? Doesn't 3Com already supply one? In the beginning, there was 3CTftpd, which was a small TFTP Server program I wrote so that 3Com customers could upgrade their 3Com equipment. 3CTftpd begat 3CServer, which was a more full-featured TFTP and FTP server I wrote. This eventually became part of 3Com's Transcend Network Management product. However, it soon became apparent that our customers were using 3CServer for a lot of other things, in addition to upgrading their 3Com boxes. I was getting a number of enhancement requests. In order to accommodate these requests, I took another look at the code, and tried to implement as many as I could. There was a problem, though. 3CServer was now part of a different product. I spoke with our Network Management folks, and we agreed that we didn't want the two programs getting in each other's way. Therefore, I decided to rename my newest incarnation to 3CDaemon. I'm confused! Which one should I use? It's really a matter of personal choice. If 3CServer fulfills your needs, then by all means, continue using it. If you want or need some of the extra functionality provided by 3CDaemon, then use it instead. Either one will work for upgrading 3Com products, since they are adapted from the same code base. Since both are freeware, I don't make a penny off of them either way :) So, what's new in this 3CDaemon thing? New interface. Lot more extensible, so that I can add sub-programs more easily. TFTP Server: Support for RFC 1782, 1783 and 1784. Block size, timeout and transfer-size negotiation. Faster. See speed comparison chart below. Prints IP address(es) on which it is listening. FTP Server: Supports PASSIVE transfer. Supports Netscape/IE4 browsing Supports 32 char passwords. Passwords are MD5 hashed. This should provide adequate password security, yet at the same time still be exportable. Prints IP address(es) on which it is listening. Syslog Server: Added Syslog functionality. Logs all syslog messages received. Allows filtering/restriction of syslog messages by IP Address. Allows logging into via message priority, message facility or IP address. Allows viewing of the log files while active, plus copy to clipboard or print Produces standard ASCII text files, suitable for including in emails or faxing. Prints IP address(es) on which it is listening. TFTP Client: Support for RFC 1782, 1783 and 1784. Block size, timeout and transfer-size negotiation. Stores addresses of frequently accessed hosts Supports multiple file transfer, or directory transfer Lots and lots of other little fixes and enhancements. Play with it. I'll be adding more as time goes by. Totally Unscientific Speed comparison: (i.e. These are numbers I got transferring the same file between two PCs on the same hub. Your mileage will vary...) Get 13.3MB File Put 13.3MB file 3CServer TFTP 75.5 secs 77.1 secs 3CDaemon TFTP 48.1 secs 46.4 secs 3CDaemon TFTP with negotiated 2048 blocksize 16 secs 15 secs 3CServer FTP 38.9 secs 57.6 secs 3CDaemon FTP 15.4 secs 16.1 secs -Oorspronkelijk bericht- Van: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]Namens Washington Rico Verzonden: woensdag 8 augustus 2001 6:23 Aan: [EMAIL PROTECTED] Onderwerp: Cisco Syslog [7:15211] Can anyone tell me how to activate a Unix syslog Daemon to create a syslog server. I would appreciate any information you have. A web site with good information would also be appreciated. Regards, Rico _ $BL5NA%a!%k$O!@$3(B No.1 $B$N(B MSN Hotmail $B$G!*(Bhttp://www.hotmail.com/JA/ _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16343t=15211 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
OT: How is the job market for CCNPs and/or CCIEs in NYC/NJ [7:16344]
Hi All, I am very curious about the current job market in New York City/New Jersey area for CCNP, CCIE type of people because I am in the process of moving to northern New Jersey. If you are in that area, from that area or know about that area, please kindly provide your answer/comments. Your inputs will be greatly appreciated. Q1. How hard/easy is it for someone with CCNP and/or CCIE with several years of experience to find a decent job in that area? Let assume this candidate has fair amount of hands-on experience and can configure a six router lab with frame relay, OSPF, EIGRP, RIP, redistribution, IPX RIP, IPX EIGRP, VLAN, etc in one hour or so. Q2. What companies in that area are currently hiring? Q3. What companies in that area are currently frozen? I know the answer to this question might be a long list. Q4. Which employer do you recommend? Q5. Which employer you don't recommend? Q6. Which reputable headhunters/search firms are specialized in placing network professionals in that area? Q7. Which headhunters/search firms you recommend? Q8. Which headhunters/search firms you don't recommend? Q9. Do employers still work with headhunters/search firms nowadays? It is said that employers don't work with headhunters/search firms now because of cost and availability of qualified candidates. I think that many people in this group might be interest in the answers to these questions as well. So your comments/input will be greatly appreciated. Thank you for all your help in advance. George Zhang Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16344t=16344 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
troubleshooting router dcd etc. [7:16345]
hi all anyone knows When the router was connected to the modem - DSR, DCD and CTS were down but RTS and DTR were up. What does this mean? Can anyone please explain? I guess this has something to do with hardware problem right? regards, suaveguru __ Do You Yahoo!? Make international calls for as low as $.04/minute with Yahoo! Messenger http://phonecard.yahoo.com/ Message Posted at: http://www.groupstudy.com/form/read.php?f=7i=16345t=16345 -- FAQ, list archives, and subscription info: http://www.groupstudy.com/list/cisco.html Report misconduct and Nondisclosure violations to [EMAIL PROTECTED]
