Re: [slim] Squeezebox Classic (SB3) Repair Considerations
puppydaddy wrote: > I too have a SB Classic which has just seemed to die on me. It was > working just fine until we had a power fluctuation and now it won't come > on. After going over the blog post linked at the beginning of the > thread, I can see that the red LED is flickering -- going on and off > multiple times per second -- which is an indication that the SB is > rebooting constantly. Thanks a lot for the very informative blog btw, so > much better than just staring at the damn thing wondering what has > happened to it. > > Is there anything I can do at this point to try and diagnose further > without opening up the device? I'm considering buying another 5V/2A > power supply but a bit unsure if I should be trying something else > before jumping into that. Hi there, I would guess that trying a new power supply is a sensible first step. They are the most frequent failure point and a power outage is often the point where they no longer get to their feet because of the startup stress that they haven't had in a long time of constantly being powered. However, I cannot guarantee you that this is all you need to do. If the SB3 still fails with the new PSU, it's likely that the situation is similar inside it, i.e. capacitors needed for a clean startup and to filter ripple are no longer able to do their job and cause the system to be unstable or even unable to boot at all. Replacement of the internal SMD capacitors is my step #2 in this situation usually. I hate to give you more worries but eventually it could be CPU death which is not recoverable no matter what. All we can do is hope that it's only one or both of the other two options mentioned. Let me know if you need more detail or advice. If you are inside EU, you might consider sending me the unit to Germany for a full diagnosis (free of charge). I'm in good training regarding the replacement of SMD capacitors and testing power supplies. I could not cure CPU death but a lot of other issues. Cheers, Joe PN me if your Boom / Classic / Transporter display has issues! Blog: https://www.blogger.com/blogger.g?rinli=1=1=5053304027701850753#allposts JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
I too have a SB Classic which has just seemed to die on me. It was working just fine until we had a power fluctuation and now it won't come on. After going over the blog post linked at the beginning of the thread, I can see that the red LED is flickering -- going on and off multiple times per second -- which is an indication that the SB is rebooting constantly. Thanks a lot for the very informative blog btw, so much better than just staring at the damn thing wondering what has happened to it. Is there anything I can do at this point to try and diagnose further without opening up the device? I'm considering buying another 5V/2A power supply but a bit unsure if I should be trying something else before jumping into that. puppydaddy's Profile: http://forums.slimdevices.com/member.php?userid=71853 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
slartibartfast wrote: > Have a look at this thread. It might help. > https://forums.slimdevices.com/showthread.php?p=654956 > > Sent from my Pixel 3a using Tapatalk My understanding is Net::UDAP only works when the SB3 is not already configured for networking. I used Net::UDAP once, many moons ago. Perhaps after the original wifi card died and I found out the remote didn't work. Now, although I can see the SB3's MAC address (and ARP requests for "who has ...") I can't get Net::UDAP to talk to it. Thanks for the pointer though. Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Beast Of Bodmin wrote: > For me, the SB3 is a pinnacle of design, both in terms of how it looks, > but in terms of the functionality and the musical fidelity. I haven't > been able to find something that can replace it in the same price range. > I could never bring myself to cough up for a Transporter. The DAC is > very good for the money. > > I have wandered off into Raspberry Pi territory, imagining a basic Pi > with a suitable DAC with phono, or possibly digital fibre output, but I > could never decide on one implementation or the other. > > Another summary of my situation: > > SB3 with no Wifi and no remote control, but a working ethernet > connection. > > It has a fixed IP of 192.168.2.10. > > No way to perform a factory reset. > > I already have a Pi acting as a Kodi box, running LibreElec, which is > configured to use WiFi to talk to my iMac to get stuff to play. The iMac > also runs LMS. > > There are Kodi plugins to have the Pi act as either a LMS or squeezebox > web controller. > > I did manage to connect the Pi to the SB3's ethernet port, but because > of the way LibreElec works, if it detects a connected ethernet port, it > will try to use that and doesn't time out to fall back on the WiFi > interface. This makes reboots more complicated than they need to be. I > suppose I could ask the LibreElec devs to consider implementing another > feature, or I could use another OS variant for the OS that does support > this. In general, I think Kodi sucks as a user interface, so I don't > want to have to mess around finding another implementation of Kodi that > will do as I want. > > I haven't worked out how to configure my home internet DSL modem to pick > up 192.168.2.0 and route the data (maybe I should contact their > support). I also haven't worked out how to get this modem to play > nicely with my Netgear WNDR3700s (v1 and v4), running dd-wrt, to act as > WiFi repeaters for the modem (I can do it via an ethernet cable, but > that is not useful to me at the moment). > > Even if I got all that to work, it seems ridiculous to have to do all > that in the first place, just because I can't change the configured IP > address on the SB3. > > And I really like my SB3.Have a look at this thread. It might help. https://forums.slimdevices.com/showthread.php?p=654956 Sent from my Pixel 3a using Tapatalk slartibartfast's Profile: http://forums.slimdevices.com/member.php?userid=35609 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
florca wrote: > Maybe' THIS ' > (https://forums.slimdevices.com/showthread.php?113660-ClassicAMP-))would > be a solution if you like the SB3 form factor (I do...)? Adds up to > quite a bit of money, but nice result... For me, the SB3 is a pinnacle of design, both in terms of how it looks, but in terms of the functionality and the musical fidelity. I haven't been able to find something that can replace it in the same price range. I could never bring myself to cough up for a Transporter. The DAC is very good for the money. I have wandered off into Raspberry Pi territory, imagining a basic Pi with a suitable DAC with phono, or possibly digital fibre output, but I could never decide on one implementation or the other. Another summary of my situation: SB3 with no Wifi and no remote control, but a working ethernet connection. It has a fixed IP of 192.168.2.10. No way to perform a factory reset. I already have a Pi acting as a Kodi box, running LibreElec, which is configured to use WiFi to talk to my iMac to get stuff to play. There are Kodi plugins to have the Pi act as either a LMS or squeezebox web controller. I did manage to connect the Pi to the SB3's ethernet port, but because of the way LibreElec works, if it detects a connected ethernet port, it will try to use that and doesn't time out to fall back on the WiFi interface. This makes reboots more complicated than they need to be. I suppose I could ask the LibreElec devs to consider implementing another feature, or I could use another OS variant for the OS that does support this. In general, I think Kodi sucks as a user interface, so I don't want to have to mess around finding another implementation of Kodi that will do as I want. I haven't worked out how to configure my home internet DSL modem to pick up 192.168.2.0 and route the data (maybe I should contact their support). I also haven't worked out how to get this modem to play nicely with my Netgear WNDR3700s (v1 and v4), running dd-wrt, to act as WiFi repeaters for the modem (I can do it via an ethernet cable, but that is not useful to me at the moment). Even if I got all that to work, it seems ridiculous to have to do all that in the first place, just because I can't change the configured IP address on the SB3. And I really like my SB3. Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Maybe' THIS ' (https://forums.slimdevices.com/showthread.php?113660-ClassicAMP-))would be a solution if you like the SB3 form factor (I do...)? Adds up to quite a bit of money, but nice result... Odroid HC1 / Armbian Stretch LMS & LocalPlayer 4x Slim Devices SB3 (White) 1x Boom, 1x Radio 2x Joggler + Squeezeplay / Squeezelite + Topping TP30 florca's Profile: http://forums.slimdevices.com/member.php?userid=7486 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Hi there, not really, sorry. I can only offer you to have a look if you send me the unit in question (to Germany). But I cannot promise you that I will find a solution for this matter. Could be that the CPU is dying (or whatever it is that causes SB3s to die). If you are interested, please send me a PN. Cheers, Johannes PN me if your Boom / Classic / Transporter display has issues! Blog: https://www.blogger.com/blogger.g?rinli=1=1=5053304027701850753#allposts JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Beast Of Bodmin wrote: > I opened the blog page and search for VHBW. Their ebay page is onholiday > until February(!). > > I found the same thing on electropapa. Described as a replacement PSU > for a Squeezebox Classic. > > EUR 13.69 inc. P > > Ordered one. > > Let's see! > > Cheers, > BoB My wifi card and replacement power supplies both arrived. I installed the wifi card and powered it up using the new PSU. Same problem. Wifi not detected, IR remote still ignored (remote seems to work, via pointing it at the camera on my android device). What can it be? Is there another way to reset the SB3, that does not involve the remote control? Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
JoeMuc2009 wrote: > > You can find tons of more info on this matter in the blog page mentioned > above. > I opened the blog page and search for VHBW. Their ebay page is onholiday until February(!). I found the same thing on electropapa. Described as a replacement PSU for a Squeezebox Classic. EUR 13.69 inc. P Ordered one. Let's see! Cheers, BoB Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Hi there, sorry, better forget about that multimeter test. A lot of people fall for this. If you measure the voltage of the unloaded PSU, you will probably find that it delivers 5V as it should. But that does not mean everything is all right. The problem is that a multimeter does not draw any current. To measure it correctly you have to apply an electronic load, and measure the current in that specific situation. A configurable battery tester such as I am demonstrating in my blog (https://joes-tech-blog.blogspot.com/2018/11/logitech-slimdevices-squeezebox-classic.html, approximately in the middle of the page) will create a defined amperage and show you what voltage is delivered under this load. It should not collapse below 4.8V at 2A. This can't be done by hooking up just a multimeter. As these power supplies are dirt cheap nowadays, I would recommend you to just buy a new one. The original PSUs are practically all dead by now after 10-12 years of constant service so this investment is probably not in vain. Be careful about the polarity though, the inside connection is positive and the outside sleeve must be negative. You can choose one for more than 2 Ampères but be sure it's constant 5V DC and no other voltage. The barrel jack is 5.5mm outside and (typically) 2.1mm inside diameter. 2.35mm might also fit, I don't know about the 5.5/2.5mm variant though. You can find tons of more info on this matter in the blog page mentioned above. Cheers, Joe PN me if your Boom / Classic / Transporter display has issues! Blog: https://www.blogger.com/blogger.g?rinli=1=1=5053304027701850753#allposts JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Happy New Year 2021 everybody! JoeMuc2009 wrote: > Yeah, it's likewise here. I could have sent you one but all shipping > services have reduced their products to premium which means 35 USD is > the new lowest limit for sending just anything except for pure paper > letters. Bummer! > Anyway, I hope this sorts things out for you, once you got it! :cool: Good news: I received my new Wifi card already. Bad news: I installed it and it is not recognised. Together with this and the apparently broken internal IR sensor, I am starting to think it is a PSU problem. The problems with the unit started after I moved from UK to CH. I can't find the original UK PSU, so I can't remember if the problems happened using that PSU (with a plug converter) or if I was using the PSU I have now. To check the PSU, I broke out my long-unused multimeter, which refused to turn on. I looked on the back of the unit and was surprised to see it needed batteries :). I opened it up and swapped over the mildly corroded button batteries, which breathed some life into the tester. But it seems to be over reading voltage by a factor of 3 - 4, both for an eneloop (rated 1.2V) and for the PSU I have. So my shopping list now is 2 x G13-A CNB (which seems to be some variant of LR44) (1.5V) - for the multimeter 1 x PSU 5V/ 2A o/p (linear?) - for the SB3 Checking www.conrad.ch... Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
philippe_44 wrote: > Are you in NAM or EU? EEA (Switzerland) Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Beast Of Bodmin wrote: > I might be able to implement a workaround while I wait. I used tcpdump > and it seems the unit has an IP address of 192.168.10.10 and is trying > to talk to 192.168.10.1. So I think I need to set up a route at home and > also run LMS and the CLI on 192.168.10.1:9000 :9090, etc. But I am > hopeless at network routing. > > Or move the home network from 192.168.1.0 to 192.168.10.0. > > Cheers! Are you in NAM or EU? LMS 7.9 on Pi 3B+ & Odroid-C2 - *SqueezeAMP!*, 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB3. Sonos PLAY:3, PLAY:5, Marantz NR1603, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, Squeezelite on Pi, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5, Riva 1 & 3 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
JoeMuc2009 wrote: > Yeah, it's likewise here. I could have sent you one but all shipping > services have reduced their products to premium which means 35 USD is > the new lowest limit for sending just anything except for pure paper > letters. Bummer! > Anyway, I hope this sorts things out for you, once you got it! :cool: I might be able to implement a workaround while I wait. I used tcpdump and it seems the unit has an IP address of 192.168.10.10 and is trying to talk to 192.168.10.1. So I think I need to set up a route at home and also run LMS and the CLI on 192.168.10.1:9000 :9090, etc. But I am hopeless at network routing. Or move the home network from 192.168.1.0 to 192.168.10.0. Cheers! Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Beast Of Bodmin wrote: > Yep. The fastest delivery option was something like USD 35. I can > wait... Yeah, it's likewise here. I could have sent you one but all shipping services have reduced their products to premium which means 35 USD is the new lowest limit for sending just anything except for pure paper letters. Bummer! Anyway, I hope this sorts things out for you, once you got it! :cool: PN me if your Boom / Classic / Transporter display has issues! Blog: https://www.blogger.com/blogger.g?rinli=1=1=5053304027701850753#allposts JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
JoeMuc2009 wrote: > Seriously? ;) Yep. The fastest delivery option was something like USD 35. I can wait... Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Beast Of Bodmin wrote: > Should be here by March 7th :) Seriously? ;) PN me if your Boom / Classic / Transporter display has issues! Blog: https://www.blogger.com/blogger.g?rinli=1=1=5053304027701850753#allposts JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
JoeMuc2009 wrote: > These Wi-Fi boards are harder to get. At eBay, I found two offerings > which are both from China. Might be problematic but I'm not sure. > This the link to one of them: https://ebay.us/PdmjPl > > ... > > Hope this helped a bit. Please keep us informed how your story goes on. > Thanks! :D Thanks for that! I decided to risk USD 6.07 and ordered one of the boards you linked to. Should be here by March 7th :) Meanwhile I will see if I can find a different PSU. Maybe even buy one! Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
KeBul wrote: > First make sure you have removed the failed wifi card even if ethernet > port is configured for use a failed wifi card can cause problems > I pulled it a few years ago, which allowed me to somehow reconfigure it for ethernet. KeBul wrote: > and second, for the remote receiver issues, try a new PSU, it's fairly > common for a failing PSU to cause issues with the IR receiver (actually > seen this myself with my SB Touch). > That is worth a try. I can dig through my pile of PSUs. I know I am not using the original PSU. KeBul wrote: > Then, if a new PSU resolves the IR issue, then it would be worth > plugging the wifi card back in and see if that bursts back into life > with the new PSU. Thanks to the info provided by 40JoeMuc2009, I have ordered a replacement WiFi daughter card. Should be here by March 7th :) Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Beast Of Bodmin wrote: > Maybe it's time to throw in the towel for my SB3? > > I tried to resurrect it today. > > The WiFi card died many years ago. > > It fell into disuse after the WiFi died, because my apartment didn't > have ethernet cables in the walls to where cable modem was. Now my main > cable modem is less than a metre away. > An alternative might be to use a Ethernet to Wifi dongle such as Vonets VAP11G-300 . User of the SB Radio which have had problems with wifi have used them with some success. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
These Wi-Fi boards are harder to get. At eBay, I found two offerings which are both from China. Might be problematic but I'm not sure. This the link to one of them: https://ebay.us/PdmjPl AR2413 is the chip that needs to be on the card because it's the only one the Squeezebox firmware supports. It is also important that you use the MiniPCI variant, avoid the ones for MiniPCI-e / MiniPCI-x and/or "half size". They are incompatible. There are only very few different models with AR2413 and classic MiniPCI. Compared to the PC world, MiniPCI is the analogy of PCI whereas MiniPCI-e or -x is for PCI-express so it's more modern and electrically a different design. I think that MiniPCI Wi-Fi boards may have been used in older notebooks, too. So it's rather generic, not something specifically designed for Squeezeboxes. I have only ever seen three different ones that fit. Sorry, could only find two in my collection right now: 32590 32591 A peek under the hood reveals that the PCB layout is mostly identical in both. Main differences are in the power supply sections. The blue one features a useful silk screen whereas the green one seems to be from Apple :rolleyes: 32592 A closeup of the chip in question: 32593 Which also sorts out the myth about AR2431 and AR2413. It's clearly AR2413 as we can see here. I confused this myself in my blog and just went and corrected it. Pity! But it really needs to pop the shields and look closely. I guess the stickers on the backof the cards are more helpful than what is in the front-side silk screen for finding anything similar on the market. I remember purchasing a pack of 10 of these blue cards for around 20 EUR. But that was years ago. For comparison, here is a MiniPCI-x half-length card that _won't_fit_ even if the chip used is the same: 32589 The size of these cards is only about 1/3 to 1/4 of the one we need, and the card-edge connector is totally different. If you can get a hold of the blue model, that's definitely the newer one and a better design in my opinion. For instance, it does not need that hefty voltage regulator that the old card has which spreads a lot of heat, i.e. is wasting energy. Hope this helped a bit. Please keep us informed how your story goes on. Thanks! :D +---+ |Filename: AR2413.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=32593| +---+ PN me if your Boom / Classic / Transporter display has issues! Blog: https://www.blogger.com/blogger.g?rinli=1=1=5053304027701850753#allposts JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Beast Of Bodmin wrote: > Maybe it's time to throw in the towel for my SB3? > > I tried to resurrect it today. > > The WiFi card died many years ago. > > It fell into disuse after the WiFi died, because my apartment didn't > have ethernet cables in the walls to where cable modem was. Now my main > cable modem is less than a metre away. > > I can't do a factory reset, because it won't respond to the remote > control. I think the remote works because if I point my mobile phone's > camera at the remote and press buttons, I see a light. > > How involved is checking and then replacing the IR diode? With respect to the above quoted issues... First make sure you have removed the failed wifi card even if ethernet port is configured for use a failed wifi card can cause problems and second, for the remote receiver issues, try a new PSU, it's fairly common for a failing PSU to cause issues with the IR receiver (actually seen this myself with my SB Touch). Then, if a new PSU resolves the IR issue, then it would be worth plugging the wifi card back in and see if that bursts back into life with the new PSU. Kev KeBul's Profile: http://forums.slimdevices.com/member.php?userid=32883 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Maybe it's time to throw in the towel for my SB3? I tried to resurrect it today. The WiFi card died many years ago. It fell into disuse after the WiFi died, because my apartment didn't have ethernet cables in the walls to where cable modem was. Now my main cable modem is less than a metre away. I can't do a factory reset, because it won't respond to the remote control. I think the remote works because if I point my mobile phone's camera at the remote and press buttons, I see a light. Net::UDAP's udap_shell.pl discover was unsuccessful, but I understand it only works if the SB3 is factory reset. See above for why I can't do that. I connected the SB3 to the ethernet port of my iMac and with arp I can see it has an IP address in a range I was using in the past. ? (192.168.10.10) at 0:4:20:7:1c:79 on en0 ifscope [ethernet] LMS runs on my iMac and binds to the hostname IP port 9000, rather than *:9000. Grrr! Is there a way to factory reset without a remote? Is there a way to get the SB3 to use DHCP? How much is a replacement WiFi daughter board? How involved is checking and then replacing the IR diode? Do any of the Kodi plugins for squeezebox allow me to reconfigure the SB3? Beast Of Bodmin's Profile: http://forums.slimdevices.com/member.php?userid=11031 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
philippe_44 wrote: > If you want I have more than a few SB3 motherboards whose CPU will not > come back. Ill be happy to give you one Thank you for the "new" display I finally took the plunge and replaced my 'bad display' (https://forums.slimdevices.com/showthread.php?109775-Squeezebox-Classic-(SB3)-Repair-Considerations=957767=1#post957767) yesterday. The replacement has been solid so far. JoeMuc2009's 'SB3 VFD replacement blog' (ttps://joes-tech-blog.blogspot.com/2016/09/logitech-slimdevices-squeezebox-classic.html) was an invaluable resource during the process. I did stumble at one point where the blog states. > The outer sets of three pins may be shorted. That's not a problem > because they have the same potential anyway. All of the other 12 pins > must not be shorted together. If you have a multimeter or other means of > continuity checking device, use that to ensure that each pin is a > different potential than its neighboring pin(s). Whereas pins 2 and 3 in the group of 12 are actually shorted in the display. 30693 Just something to be aware of as it took me a while to realize that I hadn't soldered the two pads together by mistake. Thanks to you both there's another SB3 saved. +---+ |Filename: 2016-09-06 09.47.15 IMG_1645.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=30693| +---+ Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
ralphy wrote: > Thanks Joe. Unfortunately, I'm in Canada, but now I know what needs to > be done. I'll try to source a display from this side of the pond. > > I've replaced that unit with a spare for now. If you want I have more than a few SB3 motherboards whose CPU will not come back. Ill be happy to give you one LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi B3, B2, Pi B+, 2xPi A+, Odroid-C1, Odroid-C2, Cubie2, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
JoeMuc2009 wrote: > Looks like a line driver defect. It's not a typical issue though, these > displays are pretty solid. Anyway, in this case there is not much else > you can do but replace the display entirely. > I can supply displays, or even take care of the repair job, whichever > you prefer. I'm based in Germany and EU-wide shipping shouldn't be much > of a problem. Outside EU is a different story though... > > Cheers, > Joe Thanks Joe. Unfortunately, I'm in Canada, but now I know what needs to be done. I'll try to source a display from this side of the pond. I've replaced that unit with a spare for now. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Looks like a line driver defect. It's not a typical issue though, these displays are pretty solid. Anyway, in this case there is not much else you can do but replace the display entirely. I can supply displays, or even take care of the repair job, whichever you prefer. I'm based in Germany and EU-wide shipping shouldn't be much of a problem. Outside EU is a different story though... Cheers, Joe PN me if your Boom / Classic / Transporter display has issues! Blog: https://www.blogger.com/blogger.g?rinli=1=1=5053304027701850753#allposts JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
I have a classic display that goes blank along the horizontal centre after about 30 minutes of plugging it in from cold (room temperature). Making it hard to navigate the menus with the remote after it blanks out. 28759 28760 Has anyone seen this failure before? Or suggest how I might troubleshoot the problem. Thanks, +---+ |Filename: 4.JPG| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=28760| +---+ Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
So after building a piCorePlayer with the 'RaspTouch' (https://www.audiophonics.fr/en/boitiers-diy-boitiers-divers/rasptouch-chassis-accessories-and-touchscreen-7-kit-diy-black-p-11250.html) chassis (very nice, but costly), I moved the SBT from the living room to replace the "broken" SB3 in the bed room. Well, it turns out that blasting the amps remote didn't work either. Either there's an issue with RC5 codes, my hardware documentation is entirely wrong (doubtful, got it from the hardware support engineer of the manufacturer) or this amp has an IR sensor that needs REALLY bright LEDs. The amp's remote works fine and is quite bright when viewed with an IR-sensing smart phone. The IR blaster LEDs connect to the squeezebox barely show up on the phone, but work fine when glued to the sensor of the other amp in the living room. Oh well. Now I've got a spare SB3 that's working fine, but still no IR for that pesky amplifier. Reasonable offers for the SB3 are welcome (postage outside of Europe is probably prohibitive, though). pputzer's Profile: http://forums.slimdevices.com/member.php?userid=36842 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
JoeMuc2009 wrote: > > > > > - did IR Blaster work previously? How did it stop? Did it become > more and more unreliable, or did it fail at one point? > > > > It did work before, but after a move, the SB3 was set up again in a new place. When that happened, the blaster did not work. I initially thought the diode/blaster was bad or my IR codes were wrong, so I bought a new one. That does not work either, though. JoeMuc2009 wrote: > > > > > - if you point your smartphone's camera (in video mode), or any > video camera, towards the IR emitter diode, do you see faint purple > flashes while IR commands are being sent? (please compare to a > known-working IR remote control to verify your camera is picking up > the infrared light) > > > > Yes, that's how I know it is not emitting anything. JoeMuc2009 wrote: > > > > > - does the headphone jack of your SB3 work properly when being used > as a regular headphone output? If the left channel is missing, that > would be the same pin that drives the IR diode... > > > > I have not had time to check with a headphone yet. pputzer's Profile: http://forums.slimdevices.com/member.php?userid=36842 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
pputzer wrote: > I've got an SB3 that seems to be in good working order, except that IR > blaster is not able light up IR diodes plugged into the headphone jack. > I'm assuming it's probably the capacitors, but replacing those is beyond > my soldering skills. I was actually hoping somebody else with more IR Blaster experience would answer. I have not used IR Blaster myself yet but would advise you to check these steps: - did IR Blaster work previously? How did it stop? Did it become more and more unreliable, or did it fail at one point? - if you are trying to set it up for the first time, did you ensure the polarity and connections on the headphone jack are correct with respect to the IR diode? - if you point your smartphone's camera (in video mode), or any video camera, towards the IR emitter diode, do you see faint purple flashes while IR commands are being sent? (please compare to a known-working IR remote control to verify your camera is picking up the infrared light) - does the headphone jack of your SB3 work properly when being used as a regular headphone output? If the left channel is missing, that would be the same pin that drives the IR diode... Hope this might help you a bit. Cheers, Joe PN me if your Boom / Classic / Transporter display has issues! LMS 7.9.0 on Windows Server 2012 1x Squezeebox Classic SB2 8x Squeezebox Classic SB3 (3 waiting for repair) 8x Squeezebox Boom (one dead, one waiting for repair) 1x Transporter 2x Controller (one waiting for repair) 3x Touch (1 dead, 1 waiting for repair) 2x Radio (1 dead) JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
I've got an SB3 that seems to be in good working order, except that IR blaster is not able light up IR diodes plugged into the headphone jack. I'm assuming it's probably the capacitors, but replacing those is beyond my soldering skills. pputzer's Profile: http://forums.slimdevices.com/member.php?userid=36842 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
What an incredible resource that blog is. Wow! I've bookmarked it and I hope you'll offer repair services for a long time to come. gorman's Profile: http://forums.slimdevices.com/member.php?userid=56 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
philippe_44 wrote: > Oh sorry, as this response was to my post I missed that Sorry about that! Btw. I just found two original Squeezbox (v1) in my storage, is anyone interested in buying one of them? A collector maybe, as this is history.. it first came without casing :-) was an upgrade afterwards which I did. They still work like a charm. madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
On Sun, 6 Jan 2019 07:34:13 +, madpad wrote: > > philippe_44 wrote: >> Chris? > > Yes to: chris (at) schoeppi.net so his name is Chris as it seems. ;-) Yes, it is :-). Got your mail, will answer soon Ciao, Schoepp ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Yes to: chris (at) schoeppi.net so his name is Chris as it seems. ;-) Oh sorry, as this response was to my post I missed that LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi B3, B2, Pi B+, 2xPi A+, Odroid-C1, Odroid-C2, Cubie2, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
philippe_44 wrote: > Chris? Yes to: chris (at) schoeppi.net so his name is Chris as it seems. ;-) madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Thanks Chris, I wrote you an email. Chris? LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi B3, B2, Pi B+, 2xPi A+, Odroid-C1, Odroid-C2, Cubie2, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
philippe_44 wrote: > And Ill buy the non-working one at a reasonable price to fix it unless > Joe wants it too, in which case he has precedence. Thanks Chris, I wrote you an email. madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
schoeppi wrote: > Just want to mension that I have two SB Classics that I could sell. I am > not sure if I still have the original boxes, manuals and so on, but the > Classics and power supplys are there and still working fine AFAIK (will > test this before) :-). > > Shipping in Germany is no problem, shipping to other countries might be > to expensive regarding the insurance for the package. > > Let me know if you are interested, just drop me a message to chris (at) > schoeppi.net > > Ciao, > > Schoepp And Ill buy the non-working one at a reasonable price to fix it unless Joe wants it too, in which case he has precedence. LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi B3, B2, Pi B+, 2xPi A+, Odroid-C1, Odroid-C2, Cubie2, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Just want to mension that I have two SB Classics that I could sell. I am not sure if I still have the original boxes, manuals and so on, but the Classics and power supplys are there and still working fine AFAIK (will test this before) :-). Shipping in Germany is no problem, shipping to other countries might be to expensive regarding the insurance for the package. Let me know if you are interested, just drop me a message to chris (at) schoeppi.net Ciao, Schoepp ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Just opened the classic, are these capacitors ironed in or in a socket? > Can I just pull to remove them?To add to what @bpa said, these are smd > capacitor that can be removed using twist/turn technique but do not pull!. I personally replace them all with smds but this might be more difficult, I don't know how much you are comfortable with soldering (use solder paste if you go this route). If you are not used to that, I really recommend you have somebody else do the job for you, unless you just have to replace a couple of capacitor that obviously leaked. As I said in another post, this is an hour job with experience but can super frustrating otherwise Sent from my Redmi Note 5 using Tapatalk LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi B3, B2, Pi B+, 2xPi A+, Odroid-C1, Odroid-C2, Cubie2, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Just opened the classic, are these capacitors ironed in or in a socket? > Can I just pull to remove them? They are soldered in but there are suggestion how to remove them without desoldering see https://forums.slimdevices.com/showthread.php?103213-Squeezebox-3-common-faults-over-time=909011=1#post909011 I would advise to read the whole thread and look at the pictures posted. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Hey Philippe > > So we are talking about all of them, listed under "Issue 4: Crashing > Instead Of Playback Starting" right? I think I will open the SLIM now > and check if I see something on the board, if not I will just replace > all of them. > > Thanks. Just opened the classic, are these capacitors ironed in or in a socket? Can I just pull to remove them? madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
philippe_44 wrote: > As @bpa says, youll find lots of information on Joes blog. I > personally always replace all of them. Hey Philippe So we are talking about all of them, listed under "Issue 4: Crashing Instead Of Playback Starting" right? I think I will open the SLIM now and check if I see something on the board, if not I will just replace all of them. Thanks. madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Thanks Philippe. What do I need to do? Which capacitor needs replacing? As @bpa says, youll find lots of information on Joes blog. I personally always replace all of them. LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi B3, B2, Pi B+, 2xPi A+, Odroid-C1, Odroid-C2, Cubie2, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Thanks Philippe. What do I need to do? Which capacitor needs replacing? Most of the detail is in Joe's blog - link in the first post of the thread. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
philippe_44 wrote: > Sounds like the usual internal capacitor issue ... Thanks Philippe. What do I need to do? Which capacitor needs replacing? madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Hey Joe > > So I thought let's add 500 songs to play during the night, so I'm sure > it would be playing in the morning. After I hit play, it started playing > for about 15 seconds, and it got dark (offline) again. I could not ping > the IP anymore. But now something new happend, it just rebooted, and > came up with the first song of my 500 songs again. But it did not start > playing. I just left it like that, and after a minute, it rebooted > again, without me doing anything. So at the moment, it reboots > constantly always after about 1 minute. That was never the case before, > when I did not play anything. > > Thanks for your guess. > > Best regards. > Patrick Sounds like the usual internal capacitor issue ... LMS 7.7, 7.8 and 7.9 - 5xRadio, 3xBoom, 4xDuet, 1xTouch, 1 SB2. Sonos PLAY:3, PLAY:5, Marantz NR1603, JBL OnBeat, XBoxOne, XBMC, Foobar2000, ShairPortW, JRiver 21, 2xChromecast Audio, Chromecast v1 and v2, , Pi B3, B2, Pi B+, 2xPi A+, Odroid-C1, Odroid-C2, Cubie2, Yamaha WX-010, AppleTV 4, Airport Express, GGMM E5 philippe_44's Profile: http://forums.slimdevices.com/member.php?userid=17261 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
madpad wrote: > Hey Joe > > Great post and even better Blog, with such detailed repair instructions. > > I also own several Squeezbox 3 (Classic) devices. I now have a problem > with one of them. After a few hours of just being on standby the display > turns off, and it won't react on any command until I unplug the power > and plug it in again. After that, it runs for antoher few hours > (sometimes even 24 hours..) but not much longer. I already replaced the > power supply but it did not help, stil the same. I even reset the whole > Slim, and today I tried now the Xilinx reset and hope this helps, but if > not, any other ideas what it could be, that it just goes dark after some > hours? > > Best regards. > Patrick Hi Patrick, okay, and you are sure that it no longer reacts? It's not just the display that goes dark? Does playback cut off in the middle of playing? Because it's a huge difference between a SB that crashes and one that fails to power its display whereas anything else is fine. The display power circuitry might have issues similar to the Boom. However, the fix that I have found for the Boom circuitry does not work properly in the Classic. I never had any Classic with this sort of failure though, so there are no advice yet. Best regards, Joe PN me if your Boom / Classic / Transporter display has issues! LMS 7.9.0 on Windows Server 2012 1x Squezeebox Classic SB2 8x Squeezebox Classic SB3 (3 waiting for repair) 8x Squeezebox Boom (one dead, one waiting for repair) 1x Transporter 2x Controller (one waiting for repair) 3x Touch (1 dead, 1 waiting for repair) 2x Radio (1 dead) JoeMuc2009's Profile: http://forums.slimdevices.com/member.php?userid=23131 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Hey Joe Great post and even better Blog, with such detailed repair instructions. I also own several Squeezbox 3 (Classic) devices. I now have a problem with one of them. After a few hours of just being on standby the display turns off, and it won't react on any command until I unplug the power and plug it in again. After that, it runs for antoher few hours (sometimes even 24 hours..) but not much longer. I already replaced the power supply but it did not help, stil the same. I even reset the whole Slim, and today I tried now the Xilinx reset and hope this helps, but if not, any other ideas what it could be, that it just goes dark after some hours? Best regards. Patrick JoeMuc2009 wrote: > Hi there, > > I've created another blog entry on Squeezebox Classic (SB3) typical > issues and how to resolve them. > It can be found here: > > > Let me know if you find anything wrong or missing. It's a work in > progress. > > Cheers, > Joe madpad's Profile: http://forums.slimdevices.com/member.php?userid=68802 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
Hi Joe, thanks for the tip. I will contact them. By the way, your blog is absolutely amazing. Thank you so much Luca lvicini's Profile: http://forums.slimdevices.com/member.php?userid=66450 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss
Re: [slim] Squeezebox Classic (SB3) Repair Considerations
JoeMuc2009 wrote: > Hi there, > > I've created another blog entry on Squeezebox Classic (SB3) typical > issues and how to resolve them. > It can be found here: > > https://joes-tech-blog.blogspot.com/2018/11/logitech-slimdevices-squeezebox-classic.html > > Let me know if you find anything wrong or missing. It's a work in > progress. > > Cheers, > Joe Here is a little more guidelines on replacement WLAN card. I think compatible chipsets included AR2413 to AR5212. The retail match was TP-Link TL-WN560G but not a WN360G. Also looking for physically similar cards (i.e same layout,shield, antenna locations) on pchub (http://www.pchub.com/uph/category/279-0-0-1-0/Wireless-LAN-Card.html?ps=100=0 ) - there are planty of old laptop WLAN card that look physically similar only costs maybe about 5/$5 such as Packard Bell 17-000660 Toshiba 17-000660 ACER AR5BMB5 Sparklan WMIA-165G Sony Vaio VGN-FS515H Internal WLAN WIFI Wireless Card Board 178901432 AR5BMB5 Compex WLM54G 6AA1300 (although this has higher power output which might be a problem for player power supply) I replaced a faulty WLAN card by a Packard Bell 17-000660 (google "wireless 17-000660" images) bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=109775 ___ discuss mailing list discuss@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/discuss