Re: [Dx4win] Cluster spots

[David Kozinn, K2DBK]

One thing to do is to check the sort order for the spots in the DX Spots 
window: Right-click, then sort and arrival is likely what you want. If you have 
it set by time that might be causing the issue.

-Original Message-
From: dx4win-boun...@mailman.qth.net  On Behalf 
Of David Gould
Sent: Wednesday, June 23, 2021 1:12 PM
To: DX4WIN@mailman.qth.net
Subject: [Dx4win] Cluster spots

I use CC User to link to a cluster and then the spots are fed into DX4Win.   
The issue seems to be caused by the cluster spots not having a date (only time) 
or I am not picking up the date properly.

In the morning say at 09:00 when the bands are quiet and not many spots, my DX 
spots window in DX4Win starts with the spots from 00:00 to (say)
09:00 but then shows the spots from 09:00 to 23:59 **for the previous day**.   
It is not a big job to delete the yesterdays spots, however, after a few hours 
(say at 11:00) I suddenly find the spots for 11:00 to
23:59 for the previous day have been re-populated.

When the bands are busy the problem goes away because there are enough of 
today's spots to fill the window.

I am assuming the cluster does not **push** the spots out again, so how/why is 
either CC User or DX4Win asking for the last 100 spots again?

Can anyone shed any light on this or should I approach the CC User forum

73,

Dave  G3UEG

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster spots

[David Gould]

I use CC User to link to a cluster and then the spots are fed into 
DX4Win.   The issue seems to be caused by the cluster spots not having a 
date (only time) or I am not picking up the date properly.


In the morning say at 09:00 when the bands are quiet and not many spots, 
my DX spots window in DX4Win starts with the spots from 00:00 to (say) 
09:00 but then shows the spots from 09:00 to 23:59 **for the previous 
day**.   It is not a big job to delete the yesterdays spots, however,  
after a few hours (say at 11:00) I suddenly find the spots for 11:00 to 
23:59 for the previous day have been re-populated.


When the bands are busy the problem goes away because there are enough 
of today's spots to fill the window.


I am assuming the cluster does not **push** the spots out again, so 
how/why is either CC User or DX4Win asking for the last 100 spots again?


Can anyone shed any light on this or should I approach the CC User forum

73,

Dave  G3UEG

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster problem resolved

[Richard Van Mullen via DX4WIN]

Thanks for all the HELP from the reflector  could not of done it with out the 
help of K6YUILarry Mallek he walked me thru the hole program and low and behold 
program not problem!!! It was duplicate monitors I had mirroring monitors so it 
was hiding were it could not be found once Larry figured this out we separated 
the 2 monitors and everything works as it should Thank You All for the expert 
advise what a wonderful bunch of helpful people always wanting to help let 
DX4WIN live on Thanks Again Richard VanMullenN6uen

Sent from Yahoo Mail on Android
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster problems

[Kostas SV1DPI]

Do you get spots in packet window and you don't get in dxspots window?

If yes probably you have in file>preferences>packet1>Options to ignore 
grey spots or grey and black spots.


If you don't get anything in packet window you need to go to 
file>preferences>packet2 and fill in the last rows your callsign, check 
enabled and you favourite node, for example I have 
VE7CC-1>Whonnock-BC,ve7cc.net


...73 de Kostas SV1DPI
  (One of SZ1A-EP6T)

Στις 5/12/2019 7:55 μ.μ., ο Richard Van Mullen via DX4WIN έγραψε:

After trying different nodes with the same results I went to rtty tab and set 
that up for regular and tcp/ip then did save changes then I will get rtty 
window always in immediate mode put still no dx spot screen.I have updated 
dx4win  I'm kind of at wits end any suggestions Richard vanmullen n6uen
Sent from Yahoo Mail on Android
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster problems

[Richard Van Mullen via DX4WIN]

After trying different nodes with the same results I went to rtty tab and set 
that up for regular and tcp/ip then did save changes then I will get rtty 
window always in immediate mode put still no dx spot screen.I have updated 
dx4win  I'm kind of at wits end any suggestions Richard vanmullen n6uen
Sent from Yahoo Mail on Android
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster problems

[Richard Van Mullen via DX4WIN]

Have set up parameters for packet1 and packet2 and it is connecting to the 
cluster node and I get announcements but the only thing I see on the cluster is 
talk messages and announcements i see no dx spots or packet window just 
upgraded to version 9.0.7 from 7.01what am I doing wrong??Sorry for not knowing 
cant find help for this problem Thanks Richard vanmullen N6UEN

Sent from Yahoo Mail on Android
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN & Cluster

[Ricardo Navarrete]

Raymundo send me a PM in Spanish with your needings and I'll try to explain
you everything.

73

El mar., 3 dic. 2019 21:46, Bob Gill  escribió:

> Raymundo,
> I am not exactly sure what you are looking for but
> I have been using the information from the link
> below to integrate VE7CC with dx4win for years and
> has worked great for me. Of course YMMV
>
>
> https://t-rexsoftware.com/w4gkf/dxcluster/Integrating%20VE7CC%20CC%20User%20with%20DX4WIN%20v1.4.pdf
>
> I hope this helps.
> 73,
> Bob, K5BG
>
> On Tue, Dec 3, 2019 at 2:39 PM Raymundo Rodriguez 
> wrote:
>
> > I need the help of one of you If possible, I want to use a cluster like
> > DxSummit or some other to link it with my Log and to see what countries I
> > am missing in each band when they are leaving in the cluster, I have
> DX4WIN
> > since its inception but for work reasons outside  of the country in 8
> years
> > I have forgotten how to operate DX4WIN efficiently, maybe someone
> explains
> > to me what I have to do to make the Cluster activate the alarms of my
> > Logbook, We do not have any Node in my country. Thank you very much in
> > advance
> >
> >  Ray
> >
> > Raymundo Rodriguez - YS1RR,
> > Ingeniero Industrial, mba
> >
> > Enviado desde mi iPad Pro
> > __
> > DX4WIN mailing list
> > Home: http://mailman.qth.net/mailman/listinfo/dx4win
> > Help: http://mailman.qth.net/mmfaq.htm
> > Post: mailto:DX4WIN@mailman.qth.net
> >
> > This list hosted by: http://www.qsl.net
> > Please help support this email list: http://www.qsl.net/donate.html
> >
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] DX4WIN & Cluster

[Bob Gill]

Raymundo,
I am not exactly sure what you are looking for but
I have been using the information from the link
below to integrate VE7CC with dx4win for years and
has worked great for me. Of course YMMV

https://t-rexsoftware.com/w4gkf/dxcluster/Integrating%20VE7CC%20CC%20User%20with%20DX4WIN%20v1.4.pdf

I hope this helps.
73,
Bob, K5BG

On Tue, Dec 3, 2019 at 2:39 PM Raymundo Rodriguez  wrote:

> I need the help of one of you If possible, I want to use a cluster like
> DxSummit or some other to link it with my Log and to see what countries I
> am missing in each band when they are leaving in the cluster, I have DX4WIN
> since its inception but for work reasons outside  of the country in 8 years
> I have forgotten how to operate DX4WIN efficiently, maybe someone explains
> to me what I have to do to make the Cluster activate the alarms of my
> Logbook, We do not have any Node in my country. Thank you very much in
> advance
>
>  Ray
>
> Raymundo Rodriguez - YS1RR,
> Ingeniero Industrial, mba
>
> Enviado desde mi iPad Pro
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] DX4WIN & Cluster

[Raymundo Rodriguez]

I need the help of one of you If possible, I want to use a cluster like 
DxSummit or some other to link it with my Log and to see what countries I am 
missing in each band when they are leaving in the cluster, I have DX4WIN since 
its inception but for work reasons outside  of the country in 8 years I have 
forgotten how to operate DX4WIN efficiently, maybe someone explains to me what 
I have to do to make the Cluster activate the alarms of my Logbook, We do not 
have any Node in my country. Thank you very much in advance

 Ray

Raymundo Rodriguez - YS1RR, 
Ingeniero Industrial, mba 

Enviado desde mi iPad Pro
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster Display help

[Jim Reisert AD1C]

-- Forwarded message -
From: Rory Bowers 
Date: Thu, Nov 1, 2018 at 4:04 PM
Subject: Re: [Dx4win] Cluster Display help
To: Jim Reisert AD1C 


Yes, Paul suggested that I delete the config.dat file and restart the
software.  It worked, everything is back to normal again.  Thanks!!

Rory, K5CKS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster Display help

[Jim Reisert AD1C]

Rory, any progress on this?

On Tue, Oct 30, 2018 at 11:12 AM Mike Cizek W0VTT  wrote:
>
> Hello Rory,
>
> Right click in the DX Spots window.  Make sure you have DXCC Colors checked.
> The header on the window should read: DX Spots [DXCC] sorted by Time
>
> If this is correct, and you still don't have the colors you want, look in
> your config.txt file and search for [PacketColors]  It's about 3/4 of the
> way down and should look something like this:
>
>
>
> [PacketColors]
> BG1=255
> BG2=16777215
> BG3=16777215
> BG4=16777215
> BG5=16777215
> BG6=16777215
> BG7=16777215
> BG8=16777215
> BG9=16777215
> FG1=16777215
> FG2=0
> FG3=255
> FG4=0
> FG5=65280
> FG6=0
> FG7=0
> FG8=0
> FG9=12632256
>
> (Note that mine is quite different from the default.  255=Red;
> 16777215=White, 0=Black, etc)
>
> Note that any time you change ANY of your settings, you need to write a new
> config file to save them:
> File > Preferences > File > Write configuration file
>
> --
> 73,
> Mike Cizek WØVTT
>
> -Original Message-
> From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
> On Behalf Of Rory Bowers
> Sent: Tuesday, October 30, 2018 11:49
> To: dx4win@mailman.qth.net
> Subject: [Dx4win] Cluster Display help
>
> I am still having difficulty with my cluster display.  Every spot shows up
> as black text on a yellow background except the stations I have already
> worked and undesired bands which show up as grey text on a white
> background.  I have tried everything I can think of to get this back to
> normal again. Any help will be deeply appreciated.
> Rory, K5CKS
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to mgci...@gmail.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to jjreis...@alum.mit.edu
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html



-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster Display help

[Mike Cizek W0VTT]

Hello Rory,

Right click in the DX Spots window.  Make sure you have DXCC Colors checked.
The header on the window should read: DX Spots [DXCC] sorted by Time

If this is correct, and you still don't have the colors you want, look in
your config.txt file and search for [PacketColors]  It's about 3/4 of the
way down and should look something like this:



[PacketColors]
BG1=255
BG2=16777215
BG3=16777215
BG4=16777215
BG5=16777215
BG6=16777215
BG7=16777215
BG8=16777215
BG9=16777215
FG1=16777215
FG2=0
FG3=255
FG4=0
FG5=65280
FG6=0
FG7=0
FG8=0
FG9=12632256 

(Note that mine is quite different from the default.  255=Red;
16777215=White, 0=Black, etc)

Note that any time you change ANY of your settings, you need to write a new
config file to save them:
File > Preferences > File > Write configuration file

-- 
73,
Mike Cizek WØVTT

-Original Message-
From: dx4win-boun...@mailman.qth.net [mailto:dx4win-boun...@mailman.qth.net]
On Behalf Of Rory Bowers
Sent: Tuesday, October 30, 2018 11:49
To: dx4win@mailman.qth.net
Subject: [Dx4win] Cluster Display help

I am still having difficulty with my cluster display.  Every spot shows up
as black text on a yellow background except the stations I have already
worked and undesired bands which show up as grey text on a white
background.  I have tried everything I can think of to get this back to
normal again. Any help will be deeply appreciated.
Rory, K5CKS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to mgci...@gmail.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster Display help

[Rory Bowers]

I am still having difficulty with my cluster display.  Every spot shows up
as black text on a yellow background except the stations I have already
worked and undesired bands which show up as grey text on a white
background.  I have tried everything I can think of to get this back to
normal again. Any help will be deeply appreciated.
Rory, K5CKS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster Spot colors problem

[Jim Reisert AD1C]

On Fri, Oct 12, 2018 at 3:15 PM Tim moore K4TK wrote:

> another thing, though unlikelyis if you had every country set to cause a 
> call sign alertas in they were all in your call sign alert list.

That list is rather small, less than 50 or so total characters, I
think.  But putting a * there might do what you suggested.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster Spot colors problem

[Tim moore]

another thing, though unlikelyis if you had every country set to cause
a call sign alertas in they were all in your call sign alert list.



K4TK

Tim Moore
PMP


On Fri, Oct 12, 2018 at 3:33 PM Jim Reisert AD1C 
wrote:

> On Fri, Oct 12, 2018 at 10:41 AM Rory Bowers K5CKS wrote:
>
> > I recently had to do an uninstall and reinstall for DX4Win.  When
> > everything was back up and running I noticed that ALL of my spots on the
> > cluster are showing up Yellow.  As a DXCC holder that isn't possible.
>
> 1.  You have an empty log loaded - not likely.
>
> 2.  You have the Worked cutoff in your preferences set to a very small
> value.
>
> 3.  All of your spot colors are set to Yellow (Preferences | Packet 2)
>
> I can't think of what else it might be
>
> --
> Jim Reisert AD1C, , http://www.ad1c.us
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
> Message delivered to redval...@gmail.com
>
> This list hosted by: http://www.qsl.net
> Please help support this email list: http://www.qsl.net/donate.html
>
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster Spot colors problem

[Jim Reisert AD1C]

On Fri, Oct 12, 2018 at 10:41 AM Rory Bowers K5CKS wrote:

> I recently had to do an uninstall and reinstall for DX4Win.  When
> everything was back up and running I noticed that ALL of my spots on the
> cluster are showing up Yellow.  As a DXCC holder that isn't possible.

1.  You have an empty log loaded - not likely.

2.  You have the Worked cutoff in your preferences set to a very small value.

3.  All of your spot colors are set to Yellow (Preferences | Packet 2)

I can't think of what else it might be

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster Spot colors problem

[Rory Bowers]

Hi all,
I recently had to do an uninstall and reinstall for DX4Win.  When
everything was back up and running I noticed that ALL of my spots on the
cluster are showing up Yellow.  As a DXCC holder that isn't possible.
Anyone know what might be wrong??
Thanks guys!
73, Rory, K5CKS
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] CLUSTER LIST

[kostas sv1dpi]

the right file to edit clusters is the clusters.txt in Save directory


73 Kostas SV1DPI

Στις 23/11/2017 15:45, ο py5eg έγραψε:

Hi Folks

I tried to insert some clusters addresses  on the DX4WIN.TFP list with
no success.
On the previous versions I normally insert the cluster address using the
note pad and saving it. My version 9.3 is not accepting the new
insertion.
Did I something wrong?

Oms PY5EG

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to sv1...@otenet.gr

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] CLUSTER LIST

[py5eg]

Hi Folks

I tried to insert some clusters addresses  on the DX4WIN.TFP list with
no success.
On the previous versions I normally insert the cluster address using the
note pad and saving it. My version 9.3 is not accepting the new
insertion.
Did I something wrong?

Oms PY5EG

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net
Message delivered to arch...@mail-archive.com

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster/BandMap with both Telnet and Remote Connections

[Jim Reisert AD1C]

On Tue, Feb 16, 2016 at 9:11 AM, Radivoj Kar, F6GNZ via DX4WIN
 wrote:

> Hi,Is there a way to merge both Local Telnet spots coming from CW Skimmer and 
> spots coming from remote Clusters?
>
> While listening on one band and having the CW Skimmer spots, it would be fine 
> to have other bands populated with spots from remote Clusters.

Hi Radi,

You might be able to use the VE7CC Cluster User program to do that:

   http://ve7cc.net

It can connect to multiple nodes at once.

73 - Jim AD1C

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster/BandMap with both Telnet and Remote Connections

[Radivoj Kar, F6GNZ via DX4WIN]

Hi,Is there a way to merge both Local Telnet spots coming from CW Skimmer and 
spots coming from remote Clusters? 

While listening on one band and having the CW Skimmer spots, it would be fine 
to have other bands populated with spots from remote Clusters.
73, Radi F6GNZ
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster window Version 805

[w...@att.net]

The column on the left ,with numbers single digits,  what is it stand for???
Thanks

Sent from my iPhone 5s >



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster window Version 805

[Jim Reisert AD1C]

On Thu, Dec 17, 2015 at 8:00 AM, WO2N asked:

> The column on the left ,with numbers single digits,  what is it stand for???

It says 'P' at the top which stand for Priority.  Corresponds to the
same priority as the colors.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster connects but no updates after

[Duane Calvin]

Thanks for a new clue, Kostas - around the same time the trouble started I 
switched from an AT Uverse modem/router to one from Time-Warner.  I will also 
check out VE7CC's client . . . 

73, Duane

Duane Calvin, AC5AA
Austin, Texas
ac...@ac5aa.com 


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas SV1DPI
Sent: Sunday, November 15, 2015 4:43 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Cluster connects but no updates after

I had also problems with clusters in the past. Clusters' connection braked 
after some time. I used VE7CC's client program which has a function to keep the 
connection alive. Dx4win was connected on this program and I could watch the 
spots. After a lot of time I  found that it was a problem in my adsl 
router/modem as when I changed this, I can connect to the clusters directly 
without a problem. I don' t know if this is your problem but just in case.

By the way it would be very good for all of us to use the ve7cc program. 
If I made a logging program right now from scratch, I wouldn't include a 
cluster interface but just a connection to ve7cc (beside this I wouldn't make a 
rig control routine also but just a connection to omnirig). My problem with 
ve7cc, is that many times I get bored to run another program and make the 
connection routine also. A nice solution would be if a future version of dx4win 
has an option to run ve7cc and connect to it automatically. Maybe there is an 
external program do this. Any info?

73 Kostas SV1DPI

On 14/11/2015 11:20 μμ, Duane Calvin wrote:
> Hi all - I have a peculiar problem that has cropped up.  I can't tell 
> if it's due to an MS update, or from my installing the latest Norton 
> Security software.  All has been working fine for some time, but as of 
> the last couple of weeks (roughly since I did the Norton install) I 
> can connect to a cluster, do a SH/DX to list the last series of spots, 
> but then nothing after that and I lose connection.  Now, I've got my 
> spots limited to 5-land, and there are not a lot of people actively 
> spotting in 5-land, but somehow the connection gets lost.  I don't see 
> any disconnect messages unless I try to send a spot, or do another 
> SH/DX in which case there is no response, and eventually I get a 
> message that the connection is closed.  I've looked through the Norton 
> settings but probably don't know what to look for.  If anyone can give me 
> some hints, I'd sure appreciate it.
>
>   
>
> 73, Duane
>
>   
>
> Duane Calvin, AC5AA
>
> Austin, Texas
>
> ac...@ac5aa.com
>
>   
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster connects but no updates after

[Kostas SV1DPI]

I had also problems with clusters in the past. Clusters' connection 
braked after some time. I used VE7CC's client program which has a 
function to keep the connection alive. Dx4win was connected on this 
program and I could watch the spots. After a lot of time I  found that 
it was a problem in my adsl router/modem as when I changed this, I can 
connect to the clusters directly without a problem. I don' t know if 
this is your problem but just in case.


By the way it would be very good for all of us to use the ve7cc program. 
If I made a logging program right now from scratch, I wouldn't include a 
cluster interface but just a connection to ve7cc (beside this I wouldn't 
make a rig control routine also but just a connection to omnirig). My 
problem with ve7cc, is that many times I get bored to run another 
program and make the connection routine also. A nice solution would be 
if a future version of dx4win has an option to run ve7cc and connect to 
it automatically. Maybe there is an external program do this. Any info?


73 Kostas SV1DPI

On 14/11/2015 11:20 μμ, Duane Calvin wrote:

Hi all - I have a peculiar problem that has cropped up.  I can't tell if
it's due to an MS update, or from my installing the latest Norton Security
software.  All has been working fine for some time, but as of the last
couple of weeks (roughly since I did the Norton install) I can connect to a
cluster, do a SH/DX to list the last series of spots, but then nothing after
that and I lose connection.  Now, I've got my spots limited to 5-land, and
there are not a lot of people actively spotting in 5-land, but somehow the
connection gets lost.  I don't see any disconnect messages unless I try to
send a spot, or do another SH/DX in which case there is no response, and
eventually I get a message that the connection is closed.  I've looked
through the Norton settings but probably don't know what to look for.  If
anyone can give me some hints, I'd sure appreciate it.

  


73, Duane

  


Duane Calvin, AC5AA

Austin, Texas

ac...@ac5aa.com

  


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster connects but no updates after

[Radivoj Kar, F6GNZ via DX4WIN]

I think the DX4WIN Updater has DXcluster update that contains the "keep alive" 
mode...
73, Radi F6GNZ
 


 Le Dimanche 15 novembre 2015 14h51, Duane Calvin <ac...@ac5aa.com> a écrit 
:
   
 

 Thanks for a new clue, Kostas - around the same time the trouble started I 
switched from an AT Uverse modem/router to one from Time-Warner.  I will also 
check out VE7CC's client . . . 

    73, Duane

Duane Calvin, AC5AA
Austin, Texas
ac...@ac5aa.com 


-Original Message-
From: DX4WIN [mailto:dx4win-boun...@mailman.qth.net] On Behalf Of Kostas SV1DPI
Sent: Sunday, November 15, 2015 4:43 AM
To: dx4win@mailman.qth.net
Subject: Re: [Dx4win] Cluster connects but no updates after

I had also problems with clusters in the past. Clusters' connection braked 
after some time. I used VE7CC's client program which has a function to keep the 
connection alive. Dx4win was connected on this program and I could watch the 
spots. After a lot of time I  found that it was a problem in my adsl 
router/modem as when I changed this, I can connect to the clusters directly 
without a problem. I don' t know if this is your problem but just in case.

By the way it would be very good for all of us to use the ve7cc program. 
If I made a logging program right now from scratch, I wouldn't include a 
cluster interface but just a connection to ve7cc (beside this I wouldn't make a 
rig control routine also but just a connection to omnirig). My problem with 
ve7cc, is that many times I get bored to run another program and make the 
connection routine also. A nice solution would be if a future version of dx4win 
has an option to run ve7cc and connect to it automatically. Maybe there is an 
external program do this. Any info?

73 Kostas SV1DPI

On 14/11/2015 11:20 μμ, Duane Calvin wrote:
> Hi all - I have a peculiar problem that has cropped up.  I can't tell 
> if it's due to an MS update, or from my installing the latest Norton 
> Security software.  All has been working fine for some time, but as of 
> the last couple of weeks (roughly since I did the Norton install) I 
> can connect to a cluster, do a SH/DX to list the last series of spots, 
> but then nothing after that and I lose connection.  Now, I've got my 
> spots limited to 5-land, and there are not a lot of people actively 
> spotting in 5-land, but somehow the connection gets lost.  I don't see 
> any disconnect messages unless I try to send a spot, or do another 
> SH/DX in which case there is no response, and eventually I get a 
> message that the connection is closed.  I've looked through the Norton 
> settings but probably don't know what to look for.  If anyone can give me 
> some hints, I'd sure appreciate it.
>
>  
>
>                73, Duane
>
>  
>
> Duane Calvin, AC5AA
>
> Austin, Texas
>
> ac...@ac5aa.com
>
>  
>
> __
> DX4WIN mailing list
> Home: http://mailman.qth.net/mailman/listinfo/dx4win
> Help: http://mailman.qth.net/mmfaq.htm
> Post: mailto:DX4WIN@mailman.qth.net
>
> This list hosted by: http://www.qsl.net Please help support this email 
> list: http://www.qsl.net/donate.html
>

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

 
  
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster connects but no updates after

[Jim Reisert AD1C]

On Sun, Nov 15, 2015 at 12:55 PM, Radivoj Kar, F6GNZ wrote:

> I think the DX4WIN Updater has DXcluster update that contains the "keep 
> alive" mode...

It does, but it doesn't work nearly as well as the VE7CC user program.

-- 
Jim Reisert AD1C, , http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster connects but no updates after

[Duane Calvin]

Hi all - I have a peculiar problem that has cropped up.  I can't tell if
it's due to an MS update, or from my installing the latest Norton Security
software.  All has been working fine for some time, but as of the last
couple of weeks (roughly since I did the Norton install) I can connect to a
cluster, do a SH/DX to list the last series of spots, but then nothing after
that and I lose connection.  Now, I've got my spots limited to 5-land, and
there are not a lot of people actively spotting in 5-land, but somehow the
connection gets lost.  I don't see any disconnect messages unless I try to
send a spot, or do another SH/DX in which case there is no response, and
eventually I get a message that the connection is closed.  I've looked
through the Norton settings but probably don't know what to look for.  If
anyone can give me some hints, I'd sure appreciate it.  

 

   73, Duane

 

Duane Calvin, AC5AA

Austin, Texas

ac...@ac5aa.com 

 

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster issue

[Jim Reisert AD1C]

On Thu, Jan 1, 2015 at 5:21 PM, Joe Cagnina WA4JUK wrote:

 I am experiencing this very same cluster/packet issue. I have been looking at 
 all and just cannot seem to correct it.
 Returning a not an HTML/Word document?

Don't connect to DX Summit.  Connect to one of the many DX cluster
nodes out there using Telnet (most of the rest of the list).  DX
Summit changed their whole format not long ago, it may no longer work
with DX4WIN.

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster issue

[Joe Cagnina]

Was a fix located for our Cluster problem. Mine has not been resolved

Joe Wa4JK

__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster issue

[Joe Cagnina]

I am experiencing this very same cluster/packet issue. I have been looking at 
all and just cannot seem to correct it.
Returning a not an HTML/Word document?
Need help also.

Joe WA4JUK
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster issue

[Mahaini, Saad A via DX4WIN]

Hi all,

I'm getting an error message when connecting DX4WIN to the cluster, which is 
something new that I have not had before.  The error message says Error: not 
as HTML/Text document

Has anyone experienced this issue ?

73 Saad N5FF


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster

[CHANO - EA8OG]

Hello, I have a little problem, I would like to implement the DXFUN clustes
on the list I can connect to me, I can not find the file to include someone
know how. thank you very much

Sebastián Gámez Hernández
E A 8 O G
 73´S
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster

[Ricardo Navarrete]

Chano, vete al directorio de instalación de dx4win , después te vas a
/save/dx4win.tcp

Ahi lo tienes

Saludos


2014/1/12 CHANO - EA8OG ea8og2...@gmail.com

 Hello, I have a little problem, I would like to implement the DXFUN clustes
 on the list I can connect to me, I can not find the file to include someone
 know how. thank you very much

 Sebastián Gámez Hernández
 E A 8 O G
  73´S
 __
 DX4WIN mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:DX4WIN@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html




-- 
EA4ZK Ricardo Navarrete
ricardoea...@gmail.com

*CWops : 1070*



*POR FAVOR, SI VAS A REENVIAR ESTE CORREO, TEN EN CUENTA LOS SIGUIENTES
PUNTOS:1.- Borra la dirección e-mail del remitente así como cualquier otra
dirección e-mail que aparezca en el cuerpo del mensaje.2.- Protege frente a
terceros a todos los destinatarios de tus mensajes colocando sus
direcciones en la línea de CCO (Con Copia Oculta).*
*Combatir el spam es tarea de todos.*
*Gracias por tu colaboración.*
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster

[Kostas SV1DPI]

If you need to add a cluster node to dx4win, you must open the 
dx4win.tcp file with your notepad, add the line you want and save and 
exit. The next time you open dx4win you will find this under your nodes list


73 Kostas SV1DPI

Στις 12/1/2014 8:43 μμ, ο/η CHANO - EA8OG έγραψε:

Hello, I have a little problem, I would like to implement the DXFUN clustes
on the list I can connect to me, I can not find the file to include someone
know how. thank you very much

Sebastián Gámez Hernández
 E A 8 O G
  73´S
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html




__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster

[Jim Reisert AD1C]

If you find a cluster that's NOT in the list, let me know.  Almost all
of them are.

On Sun, Jan 12, 2014 at 12:51 PM, Kostas SV1DPI sv1...@otenet.gr wrote:

 If you need to add a cluster node to dx4win, you must open the dx4win.tcp
 file with your notepad, add the line you want and save and exit. The next
 time you open dx4win you will find this under your nodes list

 73 Kostas SV1DPI

 Στις 12/1/2014 8:43 μμ, ο/η CHANO - EA8OG έγραψε:

 Hello, I have a little problem, I would like to implement the DXFUN
 clustes
 on the list I can connect to me, I can not find the file to include
 someone
 know how. thank you very much

 Sebastián Gámez Hernández
  E A 8 O G
   73´S


-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster Spots

[Luis Teixeira]

Perhaps I've wrongly configurated my preferences..
I receive DX spots marked (red or green) in lower part of bands (speccially
10,15,20 and 40 m) as CW spots when they are in reality SSB ones.
How can I configurate DX4Win Version 8.05 to correct this and receive those
spots marked correctly ?
Thanks
Luis,CT4NH

-- 

*Luis Sutil Teixeira*
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster Spots

[Ian Fugler]

Go to PreferencesQSO and change the frequencies in the CW cut-off.

But this weekend is not typical.  You will find SSB stations operating in 
the CW section of the band, especially on  40m.  So, your CW cut-off for 40m 
may be set as 7040.  But there will be SSB operation below that this 
weekend.


73, Ian G4IIY


- Original Message - 
From: Luis Teixeira xx9...@gmail.com

To: dx4win@mailman.qth.net
Sent: Sunday, October 27, 2013 6:17 AM
Subject: [Dx4win] Cluster Spots



Perhaps I've wrongly configurated my preferences..
I receive DX spots marked (red or green) in lower part of bands 
(speccially

10,15,20 and 40 m) as CW spots when they are in reality SSB ones.
How can I configurate DX4Win Version 8.05 to correct this and receive 
those

spots marked correctly ?
Thanks
Luis,CT4NH

--

*Luis Sutil Teixeira*
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html 


__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster/slimmer-related questions

[Pete Smith N4ZR]

Hi Barry - try connecting to K1TTT, AB5K or the RBN ARC node, or any AR 
node running the latest software, and entering the following filter 
definition:


SET DX FILTER not skimdupe and not skimbusted

That should producedupe-removal and also eliminate virtually all busted 
calls.  I have not done a rigorous analysis yet but it seems to be 
working as it should.


73, Pete N4ZR
Check out the Reverse Beacon Network at
http://reversebeacon.net,
blog at reversebeacon.blogspot.com.
For spots, please go to your favorite
ARC V6 or VE7CC DX cluster node.

On 9/14/2013 10:25 AM, Barry wrote:
Been connecting to a few different Cluster nodes with skimmer feeds 
and have noted the following issues:


1.  Busted calls - just about every morning KB4JR CQs on 30m and is 
mis-spotted by Skimmer as B4JR, causing a voice alert, as I need BY on 
30.  Any way to block this individual callsign from new country voice 
alerts?


2.  AR Cluster nodes spot the same call multiple times when received 
by multiple skimmers.  CC Cluster nodes are OK and limit the spot to 
one time.  Is there a way to limit the AR Cluster skimmer spots to 
only spotting a callsign once, either in the AR Cluster node or DX4WIN?


Tnx,
Barry W2UP
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html



__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster/slimmer-related questions

[Barry]

Been connecting to a few different Cluster nodes with skimmer feeds and 
have noted the following issues:


1.  Busted calls - just about every morning KB4JR CQs on 30m and is 
mis-spotted by Skimmer as B4JR, causing a voice alert, as I need BY on 
30.  Any way to block this individual callsign from new country voice 
alerts?


2.  AR Cluster nodes spot the same call multiple times when received by 
multiple skimmers.  CC Cluster nodes are OK and limit the spot to one 
time.  Is there a way to limit the AR Cluster skimmer spots to only 
spotting a callsign once, either in the AR Cluster node or DX4WIN?


Tnx,
Barry W2UP
__
DX4WIN mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:DX4WIN@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Rick Murphy]

Yup, DX4WIN is connecting to 'localhost:7300' and that's what's dropping
after a day or so. There doesn't seem to be any real pattern to it,
unfortunately. (If it happened every 12 hours or something I'd suspect my
antivirus, for example.)

I've moved it from 'localhost:' to '1.2.3.4:7300' using the system's local
IP. If that doesn't make it better, I'll move CC User to a different
computer to see if it gets any better.
It is pretty strange - this same setup used to be as solid as a rock, which
is why it's not likely to be DX4WIN's fault.

As far as other comments go - I'm not telling DX4WIN to connect directly to
a cluster node. If you're doing that and it's periodically disconnecting
you, that could be caused by your Internet router or just because the
Internet burped. You can try turning on the keepalive that Jim referred to,
or do what I do and install VE7CC's CC User since it manages the cluster
connection for me. If the node drops me or the Internet breaks, CC User will
reconnect when the node comes back.
73,
-Rick

On Thu, Oct 14, 2010 at 8:12 PM, Mel ve...@videotron.ca wrote:

 It's disconnecting from the loop-back? That is odd! As I said... don't
 believe it's DX4Win. Checked your computer's error logs?


 On 2010-10-14 10:48, Rick Murphy wrote:

 On Thu, Oct 14, 2010 at 10:21 AM, Franz Nieberdingdk...@yahoo.com
  wrote:

  Could it be RF interference what disconnects the internet connection?
 73s Franz, DK1II



 No. The Internet connection remains up. (That's managed by VE7CC.) DX4WIN
 is
 connected to the cluster program running on the same machine via the
 loopback addresss.
 In addition, the connection remains up while on on the air but fails at
 strange times when I'm not on the air.

 All I see is Connection closed by remote host in the DX4WIN packet
 window.
 73,
 -Rick




-- 
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Rick Murphy]

On Wed, Oct 13, 2010 at 1:00 PM, Jim Reisert AD1C jjreis...@alum.mit.eduwrote:

 On Wed, Oct 13, 2010 at 10:57 AM, Dave Earnest k...@hotmail.com wrote:

  I have a solid internet connection, but I get disconnected from whichever
 cluster I am connected to on DX4WIN.
 
  Is there some parameter to set to keep this from happening?

 http://dx4win.ad1c.us/cluster/index.htm#keep


I see the same thing - after a period of time (which varies) the cluster
connection drops. Enabling the keepalive does not fix this.
I use VE7CC to manage my cluster connection; that stays working, but DX4WIN
keeps disconnecting eventually.

This seems to be a new bug in the current version of DX4WIN.
 -Rick
-- 
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Franz Nieberding]

Could it be RF interference what disconnects the internet connection?
73s Franz, DK1II



- Ursprüngliche Mail 
 Von: Rick Murphy k...@arrl.net
 An: Jim Reisert AD1C jjreis...@alum.mit.edu
 CC: DX4WIN dx4win@mailman.qth.net; k...@arrl.net
 Gesendet: Donnerstag, den 14. Oktober 2010, 16:03:39 Uhr
 Betreff: Re: [Dx4win] Cluster disconnect question
 
 On Wed, Oct 13, 2010 at 1:00 PM, Jim Reisert AD1C 
jjreis...@alum.mit.eduwrote:
 
   On Wed, Oct 13, 2010 at 10:57 AM, Dave Earnest k...@hotmail.com wrote:
 
I have a solid internet connection, but I get disconnected from  
whichever
  cluster I am connected to on DX4WIN.
  
Is there some parameter to set to keep this from happening?
 
  http://dx4win.ad1c.us/cluster/index.htm#keep
 
 
 I see the same  thing - after a period of time (which varies) the cluster
 connection drops.  Enabling the keepalive does not fix this.
 I use VE7CC to manage my cluster  connection; that stays working, but DX4WIN
 keeps disconnecting  eventually.
 
 This seems to be a new bug in the current version of  DX4WIN.
  -Rick
 -- 
 Rick Murphy, CISSP-ISSAP, K1MU/4,  Annandale VA  USA
 __
 Dx4win  mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net
 
 This list  hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 


__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Rick Murphy]

On Thu, Oct 14, 2010 at 10:21 AM, Franz Nieberding dk...@yahoo.com wrote:

 Could it be RF interference what disconnects the internet connection?
 73s Franz, DK1II


No. The Internet connection remains up. (That's managed by VE7CC.) DX4WIN is
connected to the cluster program running on the same machine via the
loopback addresss.
In addition, the connection remains up while on on the air but fails at
strange times when I'm not on the air.

All I see is Connection closed by remote host in the DX4WIN packet window.
73,
-Rick
-- 
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Jim Reisert AD1C]

On Thu, Oct 14, 2010 at 8:03 AM, Rick Murphy k...@arrl.net wrote:

 I use VE7CC to manage my cluster connection; that stays working, but DX4WIN
 keeps disconnecting eventually.
 This seems to be a new bug in the current version of DX4WIN.

I have both a direct as well as a wireless connection to the VE7CC
software, and I never lose my connection from DX4WIN, and haven't for
years, in any version.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[cw...@juno.com]

I have not been following this thread but I read this one.  I just switched to 
K3WW earlier this week for the same reason.  I kept getting disconected from 
VE7CC.  I have not yet been disconnected from K3WW.

73 from the desert, 

Fred/NA2U -- CWMAN...I'D RATHER WORK CW!!!
Yeah...but it's a DRY heat.
Wretched excess is just barely enough. -- Mario Batali (from Heat by Bill 
Buford)


-- Original Message --
From: Jim Reisert AD1C jjreis...@alum.mit.edu
To: Rick Murphy k...@arrl.net
Cc: DX4WIN dx4win@mailman.qth.net
Subject: Re: [Dx4win] Cluster disconnect question
Date: Thu, 14 Oct 2010 10:22:04 -0600

On Thu, Oct 14, 2010 at 8:03 AM, Rick Murphy k...@arrl.net wrote:

 I use VE7CC to manage my cluster connection; that stays working, but DX4WIN
 keeps disconnecting eventually.
 This seems to be a new bug in the current version of DX4WIN.

I have both a direct as well as a wireless connection to the VE7CC
software, and I never lose my connection from DX4WIN, and haven't for
years, in any version.

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

SHOCKING: 2010 Honda Civic for $1,732.09
BREAKING NEWS: Is this a SCAM? You WON#39;T believe what we found!
http://thirdpartyoffers.juno.com/TGL3141/4cb731b5c65d52af063st05vuc
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[w8gc]

  your lucky Jim, I have a 10 meg pipe and it disconnects at random 
times from both VE7CC  K1TTT it may stay up for days or hours?  I am 
going to try K3WW

73, Bob w8gc

On 10/14/2010 12:22 PM, Jim Reisert AD1C wrote:
 On Thu, Oct 14, 2010 at 8:03 AM, Rick Murphyk...@arrl.net  wrote:

 I use VE7CC to manage my cluster connection; that stays working, but DX4WIN
 keeps disconnecting eventually.
 This seems to be a new bug in the current version of DX4WIN.
 I have both a direct as well as a wireless connection to the VE7CC
 software, and I never lose my connection from DX4WIN, and haven't for
 years, in any version.

 73 - Jim AD1C

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Kostas Stamatis]

I don't remain usually for long periods connected but the last with all pj 
stations i stayed a little more and i noticed this once (disconnect from 
ve7cc program). I thought it was just bad luck but i think that i must 
notice this. I connect to ve7cc node if it has sense.
73 Kostas sv1dpi

 - Original Message - 
From: cw...@juno.com
To: jjreis...@alum.mit.edu
Cc: dx4win@mailman.qth.net; k...@arrl.net
Sent: Thursday, October 14, 2010 7:35 PM
Subject: Re: [Dx4win] Cluster disconnect question


I have not been following this thread but I read this one.  I just switched 
to K3WW earlier this week for the same reason.  I kept getting disconected 
from VE7CC.  I have not yet been disconnected from K3WW.

 73 from the desert,

 Fred/NA2U -- CWMAN...I'D RATHER WORK CW!!!
 Yeah...but it's a DRY heat.
 Wretched excess is just barely enough. -- Mario Batali (from Heat by 
 Bill Buford)


 -- Original Message --
 From: Jim Reisert AD1C jjreis...@alum.mit.edu
 To: Rick Murphy k...@arrl.net
 Cc: DX4WIN dx4win@mailman.qth.net
 Subject: Re: [Dx4win] Cluster disconnect question
 Date: Thu, 14 Oct 2010 10:22:04 -0600

 On Thu, Oct 14, 2010 at 8:03 AM, Rick Murphy k...@arrl.net wrote:

 I use VE7CC to manage my cluster connection; that stays working, but 
 DX4WIN
 keeps disconnecting eventually.
 This seems to be a new bug in the current version of DX4WIN.

 I have both a direct as well as a wireless connection to the VE7CC
 software, and I never lose my connection from DX4WIN, and haven't for
 years, in any version.

 73 - Jim AD1C

 -- 
 Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 
 SHOCKING: 2010 Honda Civic for $1,732.09
 BREAKING NEWS: Is this a SCAM? You WON#39;T believe what we found!
 http://thirdpartyoffers.juno.com/TGL3141/4cb731b5c65d52af063st05vuc
 __
 Dx4win mailing list
 Home: http://mailman.qth.net/mailman/listinfo/dx4win
 Help: http://mailman.qth.net/mmfaq.htm
 Post: mailto:Dx4win@mailman.qth.net

 This list hosted by: http://www.qsl.net
 Please help support this email list: http://www.qsl.net/donate.html
 

__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Jim Reisert AD1C]

On Thu, Oct 14, 2010 at 12:11 PM, w8gc w...@wowway.com wrote:

  your lucky Jim, I have a 10 meg pipe and it disconnects at random
 times from both VE7CC  K1TTT it may stay up for days or hours?  I am
 going to try K3WW

Both VE7CC and K1TTT are heavily-loaded nodes.  All nodes get the
spots within a second of each other these days, so there's no reason
not to use a lightly-loaded node close to you.

See http://www.dxcluster.info/ and click on the Telnet link at the
top.  There are over 450 nodes listed, some only have a couple of
users!

73 - Jim AD1C

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Rick Murphy]

On Thu, Oct 14, 2010 at 12:22 PM, Jim Reisert AD1C
jjreis...@alum.mit.eduwrote:

 On Thu, Oct 14, 2010 at 8:03 AM, Rick Murphy k...@arrl.net wrote:

  I use VE7CC to manage my cluster connection; that stays working, but
 DX4WIN
  keeps disconnecting eventually.
  This seems to be a new bug in the current version of DX4WIN.

 I have both a direct as well as a wireless connection to the VE7CC
 software, and I never lose my connection from DX4WIN, and haven't for
 years, in any version.


I see that my use of VE7CC is ambiguous.

I use VE7CC's CC User program on my Windows XP system to connect over the
Internet to the W3LPL node. That connection is not what's breaking.

I connect from DX4WIN to the loopback (127.0.0.1: 7300) that's the
connection that's being dropped. Since there's no indication why this is
happening, it could be a bug in CC User as well. I was under the impression
that the VE7CC CC User program was what was disconnecting. If it's happening
to others not using CC User then perhaps the finger is pointing back?

I'll probably have to set up something to sniff the connection so I can
figure out what end (CC User or DX4WIN) is causing the disconnect.
73,
 -Rick
-- 
Rick Murphy, CISSP-ISSAP, K1MU/4, Annandale VA USA
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Mel]

Don't think so Rick! I can leave DX4Win connected for days on end. It's 
either your ISP or the cluster you use.

On 2010-10-14 10:03, Rick Murphy wrote:


 This seems to be a new bug in the current version of DX4WIN.
   -Rick
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Mel]

It's disconnecting from the loop-back? That is odd! As I said... don't 
believe it's DX4Win. Checked your computer's error logs?

On 2010-10-14 10:48, Rick Murphy wrote:
 On Thu, Oct 14, 2010 at 10:21 AM, Franz Nieberdingdk...@yahoo.com  wrote:

 Could it be RF interference what disconnects the internet connection?
 73s Franz, DK1II


 No. The Internet connection remains up. (That's managed by VE7CC.) DX4WIN is
 connected to the cluster program running on the same machine via the
 loopback addresss.
 In addition, the connection remains up while on on the air but fails at
 strange times when I'm not on the air.

 All I see is Connection closed by remote host in the DX4WIN packet window.
 73,
  -Rick
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster disconnect question

[Dave Earnest]

I have a solid internet connection, but I get disconnected from whichever 
cluster I am connected to on DX4WIN.
 
Is there some parameter to set to keep this from happening?
 
73




Dave Earnest

k...@arrl.net

  
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

Re: [Dx4win] Cluster disconnect question

[Jim Reisert AD1C]

On Wed, Oct 13, 2010 at 10:57 AM, Dave Earnest k...@hotmail.com wrote:

 I have a solid internet connection, but I get disconnected from whichever 
 cluster I am connected to on DX4WIN.

 Is there some parameter to set to keep this from happening?

http://dx4win.ad1c.us/cluster/index.htm#keep

-- 
Jim Reisert AD1C, jjreis...@alum.mit.edu, http://www.ad1c.us
__
Dx4win mailing list
Home: http://mailman.qth.net/mailman/listinfo/dx4win
Help: http://mailman.qth.net/mmfaq.htm
Post: mailto:Dx4win@mailman.qth.net

This list hosted by: http://www.qsl.net
Please help support this email list: http://www.qsl.net/donate.html

[Dx4win] Cluster database

[bbre...@aceweb.com]

When I try to use the dxsummit sites I get Error: Not an HTML or Text file It 
has nothing to do with the new release because I have had this problem for 
awhile. What do I need to change?

73,
Buddy/K4CJB


Download the latest cluster database file (DX4WIN.TCP) from: 

http://dx4win.ad1c.us/cluster.htm 

Make sure your Packet Window is open. If it is not, check your 
Packet1 preferences, make sure that Type is set to Regular and 
COM Port is set to TCP/IP. 

With the Packet Window open, right-click in the window and select 
Internet Connection. 

Then select the first entry in the list to see the most recent 25 
spots, and it will update every 1 minute: 

25 OH8X, http://www.dxsummit.fi/text/dx25.html|1 

73 - Jim AD1C 
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

Re: [Dx4win] Cluster database

[Jim Reisert AD1C]

You HAVE to use the new DX4WIN.TCP files.  The old site is gone and
those URLs no longer work.  You must use one of these new URLs from
the new file:

25 OH8X,http://www.dxsummit.fi/text/dx25.html|1
100 OH8X,http://www.dxsummit.fi/text/dx100.html
1000 OH8X,http://www.dxsummit.fi/text/dx1000.html
1 OH8X,http://www.dxsummit.fi/text/dx1.html

If your version of DX4WIN is older than 7.02, the first one won't
work, but you can remove the |1 from the end of the line and it
might.

73 - Jim AD1C

2008/12/15 bbre...@aceweb.com bbre...@aceweb.com:
 When I try to use the dxsummit sites I get Error: Not an HTML or Text file
 It has nothing to do with the new release because I have had this problem
 for awhile. What do I need to change?

 73,
 Buddy/K4CJB

-- 
Jim Reisert AD1C/Ø, jjreis...@alum.mit.edu, http://www.ad1c.us
Let Not Mankind Bogart Love - Willie Nelson
___
Dx4win mailing list
Dx4win@mailman.qth.net
http://mailman.qth.net/mailman/listinfo/dx4win

[Dx4win] Cluster via VE7CC

[Stan Staten]

Following discussions here, I have started to use the VE7CC program.  It
is really neat in that I can simultaneously connect to a specific
cluster with both DX4WIN and my contest logging program.  However, I am
having a filter proglem.  I have set the cluster to pass origination CTY
spots for K, VE, XE and when I telnet into the cluster directly from
DX4WIN all seems to work as expected.  However, when I use VE7CC I get
all spots, independent of filters to DX4WIN.  I ewven printed out the AR
Cluster docs and read them ( if all else failes, read the instructions).
What am I doing wrong.

73 Stan, N3HS

[Dx4win] Cluster via VE7CC

[Joe - WDØM]

Hi Stan,

Have you set the filters the same way in VE7CC's program?  You can specify 
exactly what you want to see there, down to country, state and band.  Be 
sure to click on Tell cluster so that your filter settings are put into 
effect.

73,
Joe
WD?M


At 07:26 AM 1/25/2005, Stan Staten wrote:

Following discussions here, I have started to use the VE7CC program.  It
is really neat in that I can simultaneously connect to a specific
cluster with both DX4WIN and my contest logging program.  However, I am
having a filter proglem.  I have set the cluster to pass origination CTY
spots for K, VE, XE and when I telnet into the cluster directly from
DX4WIN all seems to work as expected.  However, when I use VE7CC I get
all spots, independent of filters to DX4WIN.  I ewven printed out the AR
Cluster docs and read them ( if all else failes, read the instructions).
What am I doing wrong.

73 Stan, N3HS


-- 
No virus found in this outgoing message.
Checked by AVG Anti-Virus.
Version: 7.0.300 / Virus Database: 265.7.2 - Release Date: 1/21/2005

[Dx4win] cluster time out info

[Don Hinte]

Hi All,

I am running two Ar-Clusters, both are open one is filtered for NA. There is
no time out set on the clusters. They are both listed in DX4WIN.

You can use them to find out if your time out proublem is on your end
(ie:settings on your computer or your ISP).

All are welcome to use the clusters.

The address are listed below

73's Don/KA5EYH

E-mail [EMAIL PROTECTED]
Web Page http://ka5eyh.drhnet.com
DXC Node dxc-ka5eyh.drhnet.com (filtered for NA)
DXC Node dxc-ts-ka5eyh.drhnet.com (un-filtered)



I am using the free version of SPAMfighter for private users.
It has removed 26486 spam emails to date.
Paying users do not have this message in their emails.
Try www.SPAMfighter.com for free now!

[Dx4win] Cluster spots coming in?

[Jim Reisert AD1C]

--- wo2n [EMAIL PROTECTED] wrote:

 Hi Anyone have an answer for doing a:
 SH/DX/10 VU4  last 10 spots show in rtty window, okay, but ONLY 4 of the 
 spots show up in the SPOT window??? In other words both windows don't report 
 the same amount of spots?

If you sort by time, only the most recent spot for the given band and mode are
saved.  Newer spots on the same band and mode replace older spots.  If you sort
by arrival, then you will get all the spots (I think).

73 - Jim AD1C


=
Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
From [EMAIL PROTECTED]  Tue Jan  4 16:47:18 2005
From: [EMAIL PROTECTED] (Bill NY9H)
Date: Tue Jan  4 16:50:14 2005
Subject: [Dx4win]  screen position question
In-Reply-To: [EMAIL PROTECTED]
References: [EMAIL PROTECTED]
Message-ID: [EMAIL PROTECTED]

I am using two monitors, however something happened when i reloaded dx4win.

I used to have the application showing mostly on the second monitor. When I 
brought up dx4win, i do believe that it would return to the previous setup 
, that is using the second monitor.

The second monitor works fine. Other applications open on the second 
monitor, but the dx4win always comes up on the primary monitor, even if 
properly  closed down while on the second monitor.

What and where do i need to go to restore the double monitor setup ??

tnx
bill

bill

[Dx4win] Cluster spots coming in?

[wo2n]

Okay Jim, thanks for the quick response. I'll try arrival
73, Bernie/WO2N.
- Original Message - 
From: Jim Reisert AD1C [EMAIL PROTECTED]
To: wo2n [EMAIL PROTECTED]; dx4win@mailman.qth.net
Sent: Tuesday, January 04, 2005 4:33 PM
Subject: Re: [Dx4win] Cluster spots coming in?


 --- wo2n [EMAIL PROTECTED] wrote:

 Hi Anyone have an answer for doing a:
 SH/DX/10 VU4  last 10 spots show in rtty window, okay, but ONLY 4 of the
 spots show up in the SPOT window??? In other words both windows don't 
 report
 the same amount of spots?

 If you sort by time, only the most recent spot for the given band and mode 
 are
 saved.  Newer spots on the same band and mode replace older spots.  If you 
 sort
 by arrival, then you will get all the spots (I think).

 73 - Jim AD1C


 =
 Jim Reisert AD1C, 7 Charlemont Court, North Chelmsford, MA 01863
 USA +978-251-9933, [EMAIL PROTECTED], http://www.ad1c.com
 

[Dx4win] cluster spots

[[EMAIL PROTECTED]]

Hi Forum
Is it possible to set the dx spots coming in so that only countries not 
wkd are new countries? 

Regards de Dave


--- StripMime Report -- processed MIME parts ---
multipart/alternative
  text/plain (text body -- kept)
  text/html
The reason this message is shown is because the post was in HTML
or had an attachment.  Attachments are not allowed.  To learn how
to post in Plain-Text go to: http://www.expita.com/nomime.html  ---

[Dx4win] Cluster Connect Questions - Long

[Bob, N5RP]

This might be long winded, and at first may seem to have only minor connect 
to the reflector at hand, but I will appreciate your reading.

Subject:
DX4WIN, DXTELNET, NA - Software in use and inter-related in this message.
/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\/\

I have been seeing where others were connecting to the clusters using 
IK4VYX DXTELNET,
and then having the connection from this software put spots into DX4WIN,
so I decided to see what was involved, and attempt to do same.

I succeeded, and all seems to work fine.

AA)
I loaded the 3 necessary programs of:
UDP program from IK4VYX,
DXT4WIN from IK4VYX,
and then DX4WIN; Vs 5.03.

aa)
Pse confirm I do need all three programs loaded correct ??

BB)
The stay alive feature of DXTELNET seems to be of advantage to my station 
installation. The filters available to DXTELNET may prove of value.

bb)
What other advantages might I realize by running DX4WIN with a linked 
DXTELNET data retrieve that do not seem to come to my mind just now?

CC)
Finally, I would appreciate p-mail from any reader that has first hand 
knowledge in connecting to the clusters and managing to feed the received 
data into a contest computer running DOS based program NA version 10.54.

If I can manage to feed packet spots into NA, as I have managed to do with 
DX4WIN, then this will be the next conquest for station N5RP.
Bob Perring
...
Amateur Radio Station  N5RP
mailto:[EMAIL PROTECTED]
N5RP Station Page: http://freeweb.pdq.net/perring/station.html

[Dx4win] Cluster Connect Questions - Response !

[Bob, N5RP]

I really do appreciate the walk through help I got from several of you.

WW3S, NX5M, K8DD, W4MYA, K1TTT - to name just a few !

It is genuinely appreciated.
It's nice to have access to a sharp mind bank out there.

73,
Bob Perring
...
Amateur Radio Station  N5RP
mailto:[EMAIL PROTECTED]
N5RP Station Page: http://freeweb.pdq.net/perring/station.html