[expert] GCC
Anybody know reasom,why gcc-3.3.2 was downgraded in 9.2 into 3.3.1? In 9.1 it was 3.3.2. Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] GCC
On Tuesday 18 November 2003 14:41, Stew Benedict wrote: On Tue, 18 Nov 2003, Jarmo wrote: Anybody know reasom,why gcc-3.3.2 was downgraded in 9.2 into 3.3.1? In 9.1 it was 3.3.2. It wasn't. 9.1 has 3.2.2. Sorry...Missunderstanding...My BAD BAD English... In 9.1 it is 3.3.2 In 9.2 it is 3.3.1 Downgraded? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] GCC
On Tuesday 18 November 2003 15:39, Thomas Backlund wrote: so it's definately 3.2.2 SORRY GUYS.. Too much reading...Have to cut whole forrest to see trees...;-) Or wash my glasses Damn me. The point why I started to look,was that I can't get lm-sensors 2.8.0 compiled...Yes I know there is rpm...But I have so exotic mb... Asrock K7S8X with sis cipset,exept sensors are winbonds... I get: [EMAIL PROTECTED] lm_sensors-2.8.0]# make make: *** No rule to make target `/usr/lib/gcc-lib/i586-mandrake-linux-gnu/3.2.2/include/stdio.h', needed by `prog/detect/dmidecode.rd'. Stop. [EMAIL PROTECTED] lm_sensors-2.8.0]# And I should have seen there 3.2.2 But anyway,there is not stdio.h in 3.3.1/include either Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] GCC
On Tuesday 18 November 2003 16:01, Jarmo wrote: The point why I started to look,was that I can't get lm-sensors 2.8.0 compiled...Yes I know there is rpm...But I have so exotic mb... Asrock K7S8X with sis cipset,exept sensors are winbonds... No worry anymore.Downloaded lm-sensors 2.8.1 as well as i2c-2.8.1 and got them working... Again sorry for bothering... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Kmail po3-filters
Has anyone got pop3 filters working in Kmail? If I greate forinstance filter message contains html delete from server filter does not work. If I greate mail filter as above and set action move into trash it works like a charm. I'm tired to see that html-crab and would like to get rid of them without downloading them at all. Or is there a bug in Kmail,can't recall,but have read/heard that it might be a bug? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Re: Kmail po3-filters
On Monday 10 November 2003 18:26, Björn Lundin wrote: In KMail Config, network-part, your receive-account, did you check 'Filter messages if they are greater than x bytes'? That is how you enable pop-filters. /Björn AH...No...Didn'n know about that at all...Have tried to read all docs,but obviosly somehow got pass that point... Have to try it immediately... Thanks... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Re: Kmail po3-filters
On Monday 10 November 2003 18:26, Björn Lundin wrote: In KMail Config, network-part, your receive-account, did you check 'Filter messages if they are greater than x bytes'? That is how you enable pop-filters. /Björn AH...No...Didn'n know about that at all...Have tried to read all docs,but obviosly somehow got pass that point... Have to try it immediately... OK. Now I have tested it and that's not what I want.I have to set bytes nearly zero to keep that html-crab away.BUT same time I have to be online confirming poup windows actionsNO...that's not what I want.I have Kmail set by interwall checking my mail and want to set filter so,that all possible messages,that contains html,should be deleted from server without any confirmation. I don't understand why it sould be bound to any bytesize? Have to make succestion to Kmails authors to change that filter policy. Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] POP filters in KMail don't work
I'd like to see all spammers face-to-face. :-) Good luck! You not the only one..Take a queue number;-) Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] POP filters in KMail don't work
On Sunday 02 November 2003 19:17, Artemio wrote: Hey - I found what I wanted! THANKS, John! When I add filter messages that exceed..., I have a pop-up window that asks me what I want to do with the messages. THAT'S WHAT I WANTED TO HAVE!!! I used to go to my webmail to delete all spam - but now I can do it with KMail! This feature was always there and I never tried it! Damn, what a lamer I am! :-) The other day I would telnet my mail server and talk to him via POP3 to delete unwanted mail, and then I almost started writing my own application to do this job! :-) Thanks again and good luck! Artemio. Also look a small aplication.I use it via cronjob... http://users.forthnet.gr/agn/evas/spamx/download.html Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Anybody knows ?
Hi Just wonder if anybody on the list is familiar with this: Mar 28 09:55:25 oh1mrr kernel: ipt_unclean: Zero TCP ports 39067/0. Mar 28 09:55:34 oh1mrr last message repeated 2 times Mar 28 09:55:41 oh1mrr kernel: ipt_unclean: Zero TCP ports 39209/0. Mar 28 09:55:44 oh1mrr kernel: ipt_unclean: Zero TCP ports 39209/0. Mar 28 09:56:10 oh1mrr kernel: ipt_unclean: Zero TCP ports 39067/0. Mar 28 09:56:58 oh1mrr kernel: ipt_unclean: Zero TCP ports 39067/0. Mar 28 09:57:14 oh1mrr kernel: ipt_unclean: Zero TCP ports 39209/0. And could explain to me. It's capture from /var/log/messages MDK9.0 Firewall installed using iptables Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Forcing laptop to use i82365 instead of yenta
On Monday 17 February 2003 21:08, Praedor Atrebates wrote: I have never had any use for the yenta_socket driver that most distros seem to default to. It screws up my ability to use wireless cards. I have found that if I use i82365 instead of yenta, my wireless pcmcia cards just work. In Mandrake 8.2 and all previous, I would simply edit the /etc/sysconfig/pcmcia file and replace PCIC=yenta_socket to PCIC=i82365 and that was that. On 9.0 it has apparently decided that I don't get to do what I want such that when I edit the pcmcia file as described and restart pcmcia, I get a message that it is using yenta_socket instead (so there!). How do I FORCE MDK 9.0 to let me use i82365 in place of the ever-broken yenta? praedor Hi You are not alone with that problem...I use wireless with my desktop and have similar probs. What I did,I disabled kernel drivers and installed separate pcmcia_cs package,got my orinogo silwer with wavelan pci adapter working...And ofcource edited PCIC=i82365,PCIC_OPTS=irq_mode=0. In fact,when installed 9.0 I couldn't get installation through...It stopped at the beginning,where installation started looking pcmcia.I had to take card and adapter away to get installation through and then manually install wireless. Here you can find everything you need for wireless... http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Printing in KDE
Hi Has anyone else had difficulties print in kde? I can't print.When trying,klicking printer prosess hangs somewhere, haven't found any errors anywhere. With XPP I can print files... I can configure printer ( HP laserjet 4L) in mandrake control center, but not in kde control center...? Something I should know? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Printing in KDE
Hi Aarrgh...send prvious too hastly... I ment printing in konqueror...Wrote KDE... Sorry confusion... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Printing in KDE
On Tuesday 21 January 2003 21:32, JOHAM,DAVID (HP-Boise,ex1) wrote: Hi, In order to solve your problem, we'll need a little more information... Is it just a KDE problem, or printing in Linux in general? What version of Mandrake are you using? Do you have CUPS installed? Describe in detail what you see when you open something like KWORD and try to print. Are you printing to a local machine or one on the network? If you try a test page from the Mandrake Control Panel, does it work? Once we have this information, we can start making progress towards helping you. Best regards, David Sorry,stupid me Should have been more specifig. MDK9.0 ...Using CUPS. After fresh installation everything worked ok,but somewhere after MDK update (all updates done this far) printing stopped. I can print testpage in MCC,but not in KDECC.In fact I cant configure my printer in KDECC at all.If I open KDECC and open Printing manager and select my laserjet whole KDECC hungs,have to kill it with XKILL. In galeon I can print pages,but not in kongueror.Haven't installed Koffice. KDE is 3.0.5a at the moment,but printing stopped already,when used KDE 3.0.3.. Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] kde 3.0.3 konqueror problems
On Wednesday 11 December 2002 00:38, Praedor Atrebates wrote: I have checked my mimetypes and just cannot find any reason why shockwave applets don't work. What can I check, where can I check, to determine what the problem is? praedor Hi This is what I did... I downloaded shockwave flashpalyer and installed as described... Then open konqueror and first looked all netscape/mozilla plugins.. Then opened Fileassociations and added: Into Application,General options Filename pattern:*.swf Description Shockwave Flash Embedding options:Services Preference Order added: Netscape plugin viewer. Also picked one netscape icon for showing in filesystems. Then added into Text: x-shockwave -flash Filename patterns: *.swf Description:Shockwave Flash Then into Video same as into Text... I don't know if this is the right way to set it working,but it DOES WORK here anyway... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] kde 3.0.3 konqueror problems
On Wednesday 11 December 2002 19:11, Praedor Atrebates wrote: damn konqueror! I tried what you indicated and STILL cannot do any swf with konqueror. I always get the braindead message about unable to load netscape plugin for url with swf applet. Do you see any Netscape plugins,when you open konqueror settings and look there: Netscape plugins? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] kde 3.0.3 konqueror problems
I see netscape plugins. Since I installed Crossover in an attempt to get past the native linux shockwave not working, I see it looking to my ~/.netscape/plugins directory containing my Crossover plugins which includes Flash and Shockwave. Prior to installing Crossover, it pointed to my /usr/lib/mozilla/plugins directory which contained the linux shockwave plugin. Konqueror is blind and dumb, it seems. praedor Strance..? I'm out like SnowMan in winter...Flash works here just fine,as well java... I have installed java from Sun and from settings pointed path where to find it... No problemo Only difference we have...I don't have Crossover Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] /var/log - apologies, a long one
On Tuesday 10 December 2002 19:39, john wrote: logrotate -f /var/log/messages I get a terminal full of error: Try logrotate -f /etc/logrotate.conf Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] arts-devel?
Hi Anyone could point me to find arts-devel-1.0.3 for mandrake? This 9.0 mdk has only arts-1.0.3-7mdk... I need devel version for compiling some progs for kde... For curiocity looked MDK 8.2 and there is arts-2.2.2...! Why in 9.0 have gone backwards? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Why is it so difficult to get a wireless card to work in linux????
On Monday 18 November 2002 05:03, Praedor Tempus wrote: I have no problems with getting wlan cards working on my laptop (orinoco, zoomair, or netgear). I was never able to get them working properly on my desktop with a pci-to-pcmcia adaptor. The problem appeared to be related to IRQs. What sort of messages do you see in /var/log/messages related to the card and/or adaptor? That's the point...I get no messages,because MDK does stops installation right at the beginning at the point determining pcmcia...No matter how long waiting,it hungs there..(waited 7 hours something going further...no way) Have tried to change different pci slots,no effect. When I strip card and adapter,I can get MDK installation going ok,then I install adapter and card back,instal pcmcia-cs package,recompile kernel without any wireless drivers and voila',I have working wireless system... Card is orinoco silver and adapter is wavelan-pci,with TexasInstrument chipset.I have noticed,that adapter is more or less WIN type and that may cause the problem,but just wonder...In 8.0 installation went through ok,but from 8.2 up now 9.0 it hungs?Makes me thinking there's happened some kind of change in installation program? I am about to try again - upon purchasing another pci-to-pcmcia adaptor. If that fails, I will try USB which I know works (if you get the correct wlan usb device, that is). Yup This is the point...If you find correct deviceUnfortunately they are not all YET linux-compatibleBut wil be... Jarmo praedor Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Why is it so difficult to get a wireless card to work in linux????
On Monday 18 November 2002 18:28, Joan Tur wrote: If your bios has an option called Bios PnP try setting it to OFF... if it hasn't that option just forget this message ;) Thanks But unfortunately there's not that option-( Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Why is it so difficult to get a wireless card to work in linux????
On Sunday 17 November 2002 17:47, Michael Holt wrote: Yesterday, [EMAIL PROTECTED] mused: I'm glad to hear that someone was able to get it to work with the default ML install. I wasn't so lucky. I have finally managed to get it to work after 3 fresh installs of ML 9 plus I had to d/l and install the orinoco drivers... Me too Started just 9.0 installation and it stops just in the beginning when trying to determine PCMCIA stuff.Had same problem with 8.2.Made questions here hoping that someone from Mandrake team would pay tension about issue.. Seems not...Anyway I have orinoco silver card and wavelan pci adapter.. I think that's the messy one..In MDK 8.0 installation worked OK... In 8.2 I had to take off card and adapter to manage install os.Now it seems to be same...I took them away and installation go's fine... There is only huge job to get pcmcia workin...Have to use pcmcia-cs package and recompile kernel without part of pcmcia stuff...But managed in 8.2 so why not 9.0. So if someone from TEAM reads this,pse try to find correction to installation according pcmcia. By the way using amd xp-1700+ 512M ram 2x40G hd ati radeon all in wonder And as said with a little bit extra job all works fine.. Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Why is it so difficult to get a wireless card to work in linux????
On Sunday 17 November 2002 19:30, Michael Holt wrote: WHAT??? With that fact-filled email, I just don't know where to start! Seriously though, you haven't listed anything about what kind of laptop Man Don't blow your head off... If you'd read better you'd figure that this is not a laptop.. Pse read again... As said with my orinoco silver card and wavelan pci adapter etc... I can get it working...but MDK's installation does notNot big deal...eh? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] wlan, orinoco card, pci pcmcia adaptor
On Friday 02 August 2002 23:12, Praedor Tempus wrote: Does anyone have a lucent orinoco card (I have a gold card) in a pcmcia-to-pci adaptor that actually works in linux/Mandrake? The orinoco cards are supposed to be among the best supported of the 802.11b cards available yet I have never managed to get it working. I have Mandrake 8.2 installed on a desktop system and a pcmcia-to-pci adaptor. When I load the wvlan_cs driver, my messages log produces: Anyone have any ideas or a way around this? I have disabled my mobos parallel port because I don't use it - I had hoped to free up an IRQ in so doing (IRQ7) and I even commented out the /etc/pcmcia/config.opts line that excludes IRQ7 because of the parallel port so I would, presumably, have IRQ7 available for use. Nope. Any aid would be greatly appreciated. praedor Hi I have Silwer card working...Have to say that wat much harder to get it working in 8.2 than 8.1. Whole 8.2 installation failed into pcmcia state.I had to take adaptor away and install 8.2 first,then afterwards add it.But still had troubles. What I did,was ,I took separate pcmcia-cs-3.1.33.tar.gz package and compiled that + separate orinoco-cs package and added that into system... Ofcourse had to recompile kernel without pcmcia...Info can be found from pcmcia-cs package likewise about orinoco-cs info. Here's what you need.. .http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ If you have questions I can try answer directly...But I have limited time to be with my linux-mandrake...Tomorrow have to leave it for 1 months time...Not able to answer questions...Have no possibilities to read my mail during this month... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Lost Control Center
Just upgraded kde from 3.0.1 to 3.0.2 and seemed to go ok... BUT...First what found...ControlCenter stopped working... Have this issue been under discussion and fixed...I have been 2 months now without linux because of travelling,so haven't read news lately... So please,if discussed,point me to topics... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Lost Control Center
On Wednesday 31 July 2002 02:42, PlugHead wrote: Interesting... I noticed the same thing, went into the icon Preferences/Execute, set run as different user to root. Worked just fine. Then, out of idle curiosity, I tried update-menus. Guess what? It stopped working... (and run as different user was reset.) -Jason On Tuesday 30 July 2002 12:54 pm, nDiScReEt wrote: You more than likely have to update the system menu as I get that, too, every now and then when you updates. None of these helped... BUT..Opened preferences and looked,where icon was pointed (/usr/X11R6/bin/DrakConf) which was link to /usr/bin/consolehelper. I changed link to point /usr/X11R6/bin/drakconf.real and that executes control center ok now... Oh what a guru I am...Am I? --)) Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Attachment [was: test message]
On Thursday 16 May 2002 11:31, Wolfgang Bornath wrote: This one: Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Ok.. I see that as you wrote it...Not as attachment..Kmail. Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert]
On Wednesday 15 May 2002 19:51, James wrote: All, Just found this at http://www.kde-look.org/content/show.php?content=1332PHPSESSID=df764edd16c 338af9b6960937c4bd1a7 It starts KDE in under 2 seconds on my box (1gig celeron) it has both fast starts for kde and kde3 ... basically it changes the init order so that it can start and you can start working while it does all the fancy things behind your back. (real tech talk here hehe) It's working for me soo. James Yes...It starts KDE faster...But when closing it,it waits much longer tan original... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Attachment [was: test message]
On Thursday 16 May 2002 05:20, Wolfgang Bornath wrote: yup! they shouldn't be klinging-on to the messages any more. What do you mean? The attachment is still there. wobo What attachment? I haven't see any attachments in those messages Jarmo. Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] RADEON vs NVIDIA - What's a good video card for 8.2
On Tuesday 07 May 2002 12:23, you wrote: The situation with the Radeons, last I heard, was that there were no ATI supplied Linux drivers, and the main support for Radeon was put in by the XFree86 folk. What I have heard about Xfree/Radeon function is that it has been problematic. Is there anybody listening here that can give a consensus on the Radeon situation? Are they running more or less natively, or not at all, or what? Also, is the performance level of the Radeons under 3D games in Linux comparable to the Nvidia equipment and the proprietary drivers? I'm curious since I have been looking at the ATI side. I've got an Abit Siluro and I'm happy, but I'm also still interested in ATI, as I'm sure others are too. LX I'm using Radeon VIVO 64MB in 8.2 and can't complain... Thus I had get ati2 drivers from http://gatos.sourceforge.net and install them after instructions...Haven't tested much with games but Return to castle of wolfenstein seems to work fine... And here's my glxgears Loading required GL library /usr/X11R6/lib/libGL.so.1.2 4465 frames in 5.0 seconds = 893.000 FPS 4932 frames in 5.0 seconds = 986.400 FPS 4933 frames in 5.0 seconds = 986.600 FPS 4933 frames in 5.0 seconds = 986.600 FPS 4919 frames in 5.0 seconds = 983.800 FPS So not bad? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Orinoco wireless and MDK 7.2
On Tuesday 16 April 2002 20:49, you wrote: localhost ifup: ./ifup: ifcfg-eth0: line 1: syntax error near unexpected token `*,*,*,*)' localhost ifup: ./ifup: ifcfg-eth0: line 1: `*,*,*,*)' localhost ifup: ipcalc: ip address expected localhost modprobe: modprobe: Can't locat module netmask localhost ifup: netmask: unknown interface: No such device localhost ifup: netmask: Hostname lookup failure localhost ifup: SIOCADDRT: No such device I don't understand what they are trying to do with the *,*,*,*) or the parameters in quote marks or the ;; at the end. Those are coming from /etc/pcmcia/wireless.opts file...You need wireless-tools to load your card. There in wireless-tools is commandprogram named iwconfig what handles wireless.opts. Look at: http://www.hpl.hp.com/personal/Jean_Tourrilhes/Linux/ Regards Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] WARNING! ( was Text + graphical logins)
On Tuesday 16 April 2002 20:57, you wrote: ya know?...there's just something wrong about taking the Penguin OUT of the boot process on a Linux machine. Mark BE ADVISED: removing the Penquin off the bootup screen is an illegal operation, and can result in your arrest, confiscation of computer, and a substantial period of incarceration. The enforcement agency, once responsible for the apprehension of those that would remove tags off of pillows and mattresses, is now known as the Penquin Preservation Agency. So you are at great peril from the PPA if you tamper with or otherwise deface the penquin in any form. Just a word of warning... Dr John Hvery open laugh Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Text + graphical logins
On Tuesday 16 April 2002 05:05, you wrote: [EMAIL PROTECTED] grabbed a keyboard and wrote: I am running LM 7.2 with graphical logging enabled. Yet when booting, the login screen with the big (or semi-big) penguin comes up all the time. It goes away after a while anyway and the graphical login screen pops up, yet this intermediate stage is annoying and I would like to skip it altogether and go straight to the graphical login screen. What needs to be done? Look for file linuxlogo,it's somewhere bin/sbin/usr/bin/usr/sbin.. Remove that,and you don't see it anymore... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Printer Setup HP LaserJet 4
On Wednesday 10 April 2002 22:41, you wrote: Well, it's just an old plain HP LaserJet 4 (no extensions in name), uses PCL5e. How can I see the driver it's using? The CUPS webinterface tells me Foomatic + gimp-print. Andreas If you use mdk 8.2 open K-panel-what to do-administer your system- configure your printer(s)... There you can select different drivers and test them Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Printer Setup HP LaserJet 4
On Tuesday 09 April 2002 04:30, you wrote: Hallo all, i have a HP LaserJet 4 here and have some setup problems. Exactly which model of laserjet 4? There is some...I have 4L... And in mdk8.1 there was some difficulties to get proper driver working... With this 8.2 more easyAlmost at once what printerdrake succested Only set papersize from letter to a4. I have HP LaserJet 4L CUPS+Gimp-print v. 4.2.0 driver in use... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Sounds?
Is this some kind a virus? I have also lost my sound system! Yesterday I had all ok,but now all gone!? insmod es1370 Using /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o: unresolved symbol unregister_sound_dsp /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o: unresolved symbol unregister_sound_midi /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o: unresolved symbol register_sound_dsp /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o: unresolved symbol register_sound_mixer /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o: unresolved symbol unregister_sound_mixer /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o: unresolved symbol register_sound_midi # modprobe es1370 /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o: init_module: No such device Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters modprobe: insmod /lib/modules/2.4.19-pre3-ac1/kernel/drivers/sound/es1370.o failed modprobe: insmod es1370 failed All what is different I updated xstart and e2fsprogs from sunet.se Modules.conf is same as yesterday...in fact all seems to be like yesterday...? Any cure? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Sounds?
On Sunday 07 April 2002 11:21, I wrote: All what is different I updated xstart and e2fsprogs from sunet.se I take back ..Not xstart...it should be Xtart...But that was not updated.. Drakxtools and drakxtools-newt were updated ... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Fwd: Re: [expert] Sounds?
Sound problem fixed... Changed card to another slot...Got sound working... It was irq conflict... I just don't get,what changed irq? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Filters
On Saturday 06 April 2002 16:42, you wrote: A lot of spam can be blocked by the ISP... however, many ISPs are incompetent in this respect. My ISP uses an upstream SP to handle mail; I was totally unimpressed by these people, so I setup my own domains and mailer (postfix). Details at http://pfortin.com/Linux/PostFix/ HTH, Pierre Thanks for reply Pierre I'm sure,I saw in my past life (read when used win) some mailers where could be set filters so,that unwanted messages were checked and deleted from isp before downloadining...Took a little longer time,but what a heck... I have no hurry... Got a do something...That aol.com stuff is driving me nuts... Regards Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Filters
Is there any way to set filters forinstance in Kmail,so that it drops mails FROM somebody not wanted? I would like to set aol.com to banned filter...I get huge number spam from there... I have looked from my ISP,but there is no way to set filters to block out unwanted messages. Regards Jarmo PS.New version of EROASTER works now fine... Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] 8.2 cd burning issues
On Saturday 23 March 2002 16:22, you wrote: The latest is cd burning. I use xcdroast, have been for ages with no Darren Hi That's not only one...Eroaster doesn't work.In 8.2 there is too new Python,what eroaster can't handle. Eroaster itself starts ok,but can't find reader or burner... Checked also with eroaster tarball installation... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] 8.2 cd burning issues
On Saturday 23 March 2002 20:03, you wrote: easy man! I was venting at having problems with the new your point is lame any way. Mandrake didn't get to the bug in time? Guess they're going the MS wayjust release it so we don't miss a release datewe'll fix bugs later! Darren Aaargh! As usual my language usage made me missunderstood... It was not ment to be lame...Just for notify,that eroaster does not work. Sorry...It's not easy to use foreign language,when last update of it was late of 60's;-) Finnished school and my practise of english is a little bit out of date;-) I noticed that 8.2 uses new version of Python and eroaster can't hadle it and went to sourceforge site and made announce there... I'm really impressed this 8.2 and there is no way to make me writing lames...so far;) What more I learn these LINUX system,that less I have subjects for laming. So apologize to all the community If I sounded down...I'm not... Regards Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] 8.2 cd burning issues
On Saturday 23 March 2002 09:24, you wrote: Jarmo, Check the newbie archives from a couple of days ago. Tom Brinkman posted a URL for a version of Eroaster that was fixed to work with 8.2. In fact for your greater shopping convenience, here is the relevant excerpt: Ok...I'll check I just got a rpm from Texstar that he said he 'fixed'. And yes, it fixed the problems I had. It's built for 8.2 and available here ftp://ftp.ibiblio.org/pub/Linux/distributions/contrib/texstar/ I used the i686, eroaster-2.0.12-3mdk I downloaded it and installedOk Ican run it,but when trying to look up my burner,it does the same,what tarred wersion,what I installed.. Yes I uninstalled TA.gz version first,before installed rpm from texstar... Thanks anyway from from help and info... Jarmo HTH Brian By the way...heres output of errors,what I get when trying to find my burner with eroaster. [root@oh1mrr usr]# eroaster 23.03.2002 10:06:29.757 INFO None [Main] ECLiPt Roaster Version 2.0.12 starting up 23.03.2002 10:06:29.764 INFO None [Main] You are root - that's fine 23.03.2002 10:06:29.766 INFO None [Main] Checking for required programs 23.03.2002 10:06:29.786 INFO None [Main] Checking for additional programs 23.03.2002 10:06:29.790 WARNING None [Main] Couldn't find freeamp 23.03.2002 10:06:29.793 WARNING None [Main] Couldn't find normalize Traceback (most recent call last): File /usr/lib/python2.2/site-packages/gtk.py, line 130, in __call__ ret = apply(self.func, a) File /usr/lib/eroaster/main.py, line 1849, in DetectRecorder self.DetectSCSIDevice(deviceRecorder) File /usr/lib/eroaster/main.py, line 1857, in DetectSCSIDevice output = cmdoutput(cdrecord -scanbus 21) File /usr/lib/eroaster/tools.py, line 379, in cmdoutput output = _readlines(pipe[0]) File /usr/lib/eroaster/tools.py, line 363, in _readlines line = opendescriptor.readline() IOError: [Errno 4] Interrupted system call [root@oh1mrr usr]# If intrested Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] 8.2
It's running...ok... But installation didn't go here as I wished... I did fresh install...Cd1 in and start,normal beginning,but in first stage,where it startet looking PCMCIA cards...Installation hung...totally... Namely I have Lucent technology wlan adapter and orinoco silwer card.I did hear 2 peeps,when installation program regonized system But then...hung. Ok...did this test 3 times,every time same situation... Took adapter and card away...Started installation and everything went trough,except installation couldn't set my audiocard installed Creative/Ensonic pci 128...I had to aply into modules.conf alias sound-slot-0 es1370,that helped. I did wlan installation afterwards,but it was not plug-and-play... far away...More like plug-an-pray..But Did get it working It's hard to find whats wrong,because there is no logs from that.. For now I don't touch it... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Flash
Does anyone have Flash working in konqueror in Mandrake 8.2? If yes...please info how...? I don't get it working...Downloaded Flash-player and installed it as recomended in README and then opened konqueror and settings and netscape-plugins and scanned them ok,but if I go forinstance www.flash.com,flash does not work... With mozilla it does Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] devfs 2.4.18 trouble
On Friday 08 March 2002 21:53, you wrote: Hi Has anyone tried upgrading a standard mandrake 8.1 to kernel 2.4.18 and gotten it to work properly? I get loads of boot errors with devfs: [ cut from syslog ] ... devfs_register(tts/0): could not append to parent, err: -17 ... devfs_register(dsp): could not append to parent, err: -17 /Ronny Nilsson You should also upgrade new dfsd daemonDon't remember where to get.. Devfs is somehow buggy according messages in kernel list.. I simply disabled devfs and recompiled kernel,no more errors. Greetings Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] d@#!$n aRtsdkde2.2.2 (comment)
Hi Praedor described quite strongly situation,which I have also noticed... And I qot that mess AFTER I upgraded first into KDE 2.2.2,where all worked ok. Then after upgrading XFree86 into vers.4.2.0 all begunExactly same errors I have disabled artsd,so I don't get anymore so much error-reports. Had in mind to downgrade,but it seems,that 8.2 is waiting at the door, so fresh install and life is good after...eh? Greetings Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Clean TMP's when rebooting
Could someone point me,where was that place where to set,delete temporary files in TMP directory when rebooting? I'm sure I saw it somewhere when installed MDKIs it possible add it somewhere afterwards? Using 81 here Greetings Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [expert] Clean TMP's when rebooting
On Monday 04 March 2002 20:10, you wrote: Check in the /etc/sysconfig/system file. CLEAN_TMP=1 # This should clean the files. META_CLASS=PowerPack SECURITY=2 CLASS=expert Thank You Did the trick...Needed action... Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://wwwmandrakestorecom
Re: [expert] sshd refuses any connection
On Thursday 21 February 2002 12:02, you wrote: Any ideas what Iam missing? How about adding in /etc/hosts.allow sshd : ALL Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] DEVFS was usb support in Mandrake?
It turns out that even if I could figure out just how to disable devfs I'm not sure it would matter now at this point. The only thing keeping me from torching this system right now is the fact that it's beta software and beta by definition means it has bugs. I would like to be able to have my /dev links free of devfs though. Now that I've meant the guy I can safely say I don't like him. Hi I had troubles with devfs and I got rid of them by compiling kernel without devfs support. I just wonder why experimental things has to take as default in MDK. Is it so big job make a documentation about new things,what people might trylater? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] how to make insmod permanent
On Friday 08 February 2002 15:17, you wrote: Why not modprobe aic7xxx. It loads all other modules for aic as well. For some reason on my MDK 8.1 box, rc.local won't run anything I have added into it. Brian D. Klar - CVE OTS WPAFB Is your rc.local file executable? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] VPN
On Tuesday 05 February 2002 06:22, you wrote: Hi All, For those who are setting up VPN, which software would you recommend to link travellers to an application running on MDK 8.1 and a samba server ? I already evaluated PPTPD. Thanks Richard Hi Richard There's not much to recomed,actually it's the only one what i've found so far,have searched trough net and score is quite null! And it seems.that developement of pptp is stopped at the moment. What I liked to find is IPSEC VPN CLIENT for linux In my case FreeSwan is not the answer...I'm end user so that's why. Greetigs Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Vs: [expert] What firewall to use in MDK 8.1
- Original Message - From: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Tuesday, January 22, 2002 1:53 AM Subject: [expert] What firewall to use in MDK 8.1 I am running MDK 8.1 and wonder what the best firewall solution is to install on my workstation. SNF is pretty cool but need to install that on a seperate machine. Any other ideas? I am not new to linux, however networking and firewalls are not my cup of tea, so if a firewall expert can give me a hint. Look www.linuxguruz.org/iptables Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Euro symbol?
This topic has been propably discussed earlier and propably found fine solutions,but i haven't found the right one.Can someone please point me the way,how I can get euro-symbol visible in kde? I can have it in console mode and terminals,but not in kde. I get ?when I press altgr-e,but when I press altgr-shift-e I get ¢. Not big issue,but would like to have my currency visible in editor anyway...In bank I can't see them,somehow they wanish -) Anyone figured this out? Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] samba and SWAT and webmin and MCC
On Monday 31 December 2001 23:46, you wrote: Hello again, Well, I had samba and swat both installed during the initial installation. After I got my network up and running I went to try the SWAT config tool to get samba running. It brings up a Konqueror window and gives the error cannot connect to localhost port 901 Hi When you have xinet.d/swat running try https://127.0.0.1:901 Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] adding memory in mandrake
On Thursday 27 December 2001 17:59, you wrote: I was wondering if adding more memory to linux mandrake is as simple as installing it and making a change in a file for it to reconize it.. I'm not sure which file it has to be to make mandrake see the added memory.. I hope someone can tell me as I want to put in 256 meg ram from 96 meg ram.. thanks Harold Just add and be happy,so is Madrake I've got 512M amd xp +1700 40G hd abit kg7-Raid100 mobo Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Vs: [expert] ide-scsi question
- Original Message - From: Darren King [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, November 15, 2001 12:02 PM Subject: [expert] ide-scsi question I added a cdrw to my system. I added hdc=ide-scsi to lilo.conf, ran lilo and added the alias scsi_adapter ide-scsi to modules.conf. Now what. cdrecord-scanbus does not see it so I can burn to it yet. Darren Hi Did you do it: append=hdc=ide-scsi ?? jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Vs: [expert] LM 8.1 Creative PCI 128 Card
- Original Message - From: Mandrake Expert [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, November 15, 2001 7:57 PM Subject: [expert] LM 8.1 Creative PCI 128 Card Has anyone had problems getting this card to work with LM8.1(Ensoniq 1370) I have got it working without any problems,noticed automatically... Greets Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Vs: [expert] telnet
- Original Message - From: Vincent Danen [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Thursday, November 15, 2001 9:15 PM Subject: Re: [expert] telnet Hi I connect to my pop3 server every now and then simply... ssh my.pop3.serv.fipassword:quesswho...boiing connect and simply type pine and voila'. jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Enough! What is wrong with linux and cdwriters?
On Saturday 10 November 2001 03:35, you wrote: This is driving me mad! I have a Teac cd-rw set as the slave to my cdrom master. MOST of the time I am unable to burn CDs, I get messages that the device isn't scsi or it has the wrong driver but once in a while I am able to burn a CD, but then no more. In lilo, I have: append= hde=ide-scsi devfs=mount quiet praedor Hi Just my quess,but have you tried without devfs=mount quiet...? Devfs according linux-kernel list is buggy likex! jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Re: [expert] Network problems caused by 'Tiny Firewall' GUI in MDK
On Friday 09 November 2001 11:16, Franki wrote: I have still not found a simple script platform like pmfirewall that asks a bunch of questions in a console at install then writes a nice easy to read list of rules, one per line with nice Hi I asked some time ago little advice here on list,got very tiny,but brave as I am started looking around the webFount qoite good place to start. Look http://www.linuxguruz.org/iptables I bet you can find from there quite suitable solutionI did. lets block Jarmo Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Firewalling
Ahoi I am now struggling with firewall buildingHave tried GuardDog,Firestarter Bastille...etc.Getting info,that I should upgrade my iptables or kernel Have linux-2.4.13 running in mdk8.1 with ext3fs. Looking after modules I can find themNow getting new message when trying to insmod modules. [root@oh1mrr root]# insmod /lib/modules/2.4.13-pre6/kernel/net/ipv4/netfilter/ip_tables.o /lib/modules/2.4.13-pre6/kernel/net/ipv4/netfilter/ip_tables.o: init_module: Device or resource busy Hint: insmod errors can be caused by incorrect module parameters, including invalid IO or IRQ parameters To me this does not tell anything,but looking somebody who has ahaa to tell me and propably make twisted model how to make things working. My mdk installation is upgrade over mdk-freq-2. Otherway this system is running okFine piece of art! TNX jarmo [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
[expert] Previous firewalling
Ahoi Couple of hours later found reason why iptables couldn't be loaded.. Was ipchains...module was loaded before iptables... But have left report,when trying to start any firewall... Wrong kernel module perhaps should update your iptables or kernelHow come?Kernel is 2.4.13-pre6 and latest iptables from coocerWhat causes this?Is it kernel headersI have in boot di- rectory kernel.h for 2.4.8-26mdk? Any ideas? jarmo [EMAIL PROTECTED] Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com
Vs: [expert] IDE and Reiser FS question
- Original Message -
From: Daniel Axtell [EMAIL PROTECTED]
To: [EMAIL PROTECTED]
Sent: Wednesday, September 12, 2001 1:15 AM
Subject: Re: [expert] IDE and Reiser FS question
Also, thanks to those who replied about the possible IDE disk problem with
the Abit KT7 motherboard, but I gather from the newsgroups that the
HighPoint HPT370 UDMA chip is a problem with Linux. The motherboard/disk
combination has worked for months; does anyone have idea whether the
dma_intr: status=0x51 { DriveReady SeekCompleteError} or dma_intr:
error=0x84 { DriveStatusError BadCRC } is something serious on a
seemingly-stable system or can I ignore it?
You have a Western Digital Drive?
If so, it is pretty normal. So is the eventual data corruption you will get
above UDMA2 (33MHz). WDs simply do not have the hardware to cope with higher
speeds and cannot do the required 57-byte CRCs. And if you don't believe me,
email Andre Hedrick direct.
It is a WD Caviar 200BB, which I bought after reading good reviews at some
hardware website (either Tomshardware or anandtech). Can anyone
recommend a good 7200 RPM that will work reliably with the ATA100 HPT370
chipset? Or am I going to have to scrap the motherboard as well?
Thanks,
Dan
Hi Dan
I had WD 10G caviar and just for it's smallnes i changed to
SAMSUNG 40G.
Have had it running now abt. 4 months with no errors,have same
mobo than you,with duron 800.
Hdparms -t says 32.76MB/s
greetings
Jarmo
Want to buy your Pack or Services from MandrakeSoft?
Go to http://www.mandrakestore.com
Re: [expert] who would like to explain?
On Wednesday 18 July 2001 22:00, you wrote: Stop compiling/recompiling. Leave it strictly alone, it is not required. If you are still new to linux the only excuse you have for trying to compile a kernel is to support some piece of hardware, or some service that is not in the ready made kernel. If you can get LM8 installed then spend some time finding your way around the installation. Compile your own kernel when you have a much better idea of what the system is and what it is doing. Daryl Johnson Proplan Associates 07710 908817 Hi Daryl Yes Good point of view... But My point is...Why drive with overloaded truck or why try fit 6 inch shit into 2 inch pot? I'm not fond of OS what tells you what you can do,I have thought,that linux has possibilities to customize it as you like...ofcourse using your skills I'm not yesterdays bird with linux,fast I'm not guru either,thats why have to ask questions or show my opinions sometimes. I have managed customize earlier versions of mandrake to suit my purposes and boy I LIKE LM But this 8.xxx serie seems to be hard target...there is too much depencies new ones what I have study OK...After your mail I burned my coil to myself and used local POWER-WORD(s) PERKELEAnd it helped...Compiled kernel with care and now it works huge smaller than original,what makes my combu working faster...I think -) Only thing is what causes problem to me is hamradioI haven't managed get that workingI can tell that I have put it working hundreds of times earlier...But something with this 2.4.x series kernel is doing things what I don't get...yet. So my apologies to all,who my earlier msg. hurt.Still want linux distros to be customized,not way M$ doing...customize your HW to fit into OS. Regards Jarmo Kettunen Tuomarinkatu 31 as 1 28120 Pori Finland
[expert] who would like to explain?
Hi all Tried some time with official LM-8.0 got it somehow running,tnx Civileme,but that was all,tried to compile kernel,means took off things what not needed...Bang,lost ppp...OK,Changed to LMFreq and got it working an once...no more hd problems...ATA-100...BUT again what ewer I try recompile kernel to get rid off not needed things I loose ppp and radioamateur stuff. But making mrproper and whole compilation,without changing anything voila' I have working distro in fireI suppose. Have played with LM from 6.0 and all of those have been piece of cace compared to 8.x series...Ok new look...new everything...BUT IT SEEMS TO BE DI- RECTION WHERE I WANT OUT...M$...YOU CAN ONLY WONDER WHAT*S GOING ON...NOT TO TUNE YOUR OWN TASTE OF DISTROPlease LM-folks...It's allways question of money,but DO NOT DO IT M$ WAYThis developement seems to go wrong directionMaybe I'm alone to think so,but I'm one voice here from middle of nowhere As said in some mail earlierDevelopement is ok,but too hasty announced products makes,anyway me thinking worst.GURUS SLEEP OVER ONE WEEK! Greetings -- Jarmo Kettunen Tuomarinkatu 31 as 1 28120 Pori Finland
RE: [expert] how to uninstall tinyfirewall?
Can anyone out there help me? I'm not subscribed to the list so if you could cc your replies directly to me that would be great. Hi You go to controlcenter ---systemservices and uncomment firewall. Then if you don't want to rebootjust give firewall stop... Was it /etc/rc.d/init.d/bastille-firewall stop..something like. greetings jarmo
Re: [expert] 8.0 install fails, kernel panic.
Hi Tnx Civileme...got 8.0 running...hde became hdchdparm -t shows 31MB/s not bad. But there's loud a much to configure...Ofcource bigger prog.But I have spare time,-) First thing is to get proper fonts to kwriteAt this age it is hard to read small text and especially when fonts are more or less unvisible. What about ata 100 controllerI have HPT 370,not PROMISEOr is it same? I found from kernel HPT 34x and HPT 366 but not 370.Looked kernel 2.4.5 also and didn't see 370 there either. Propably that's why I have difficulties with my hd. Again tnx...Now it's up to me to configure rest...until have to ask again-) greetings jarmo
Re: [expert] 8.0 install fails, kernel panic.
20.6.2001 2:15:38, silkythreads [EMAIL PROTECTED] wrote: Have you checked your machines Date/time lately ??? I got your message with this DTG - 00/06/19 01:58 AM I'd say your year's are off a little OOPS! Bran new fujitsu-siemens lifebook with win98...seems that beginning to forget WIN-HOWTO -) So time has nothing to do with my home computer where problem exists. For curiosity made yesterday lm 7.2 expert/developement installation and no problem in booting...Installation took 10 mins between cd in-- startx !! Working like sunThink,my HW can't be reason...there must be changes in new 8.0 what differs from 7.2 . I'd say 7.2 is more ata-100 compatible than 8.0... Greetings Jarmo
Re: [expert] 8.0 install fails, kernel panic.
19.6.2001 0:20:41, [EMAIL PROTECTED] wrote: Hello everyone, I have sent this to the newbie list and have not been able to get it working. I have tried civilme's suggestion to hit f1 at splash and type linux ide=reverse and to append the ide=reverse when I set up the bootloader and I still receive the following error after install: VFS: cannot open root device 2105 or 21:05 Please append a correct root= boot option kernel panic : VFS : unable to mount root fs on 21:05 Here is how I have my WD and Maxtor set-up: Connected to a pci Promise ata 100 card, WD primary master, Maxtor secondary master.The partions look like this during install: Hi all I have similar problem here,except I get 2106 or 21:06 instead of 2105..HD is SAMSUNG 40G mobo is KT-7 RAID amd duron 800... Have tried edit lilo.conf unsuccesfullyBy the wayIs it too much asked to give possibility to select default-editor during installation I'm not so familiar with VIPlease don't start again discussion what's THE BEST editorQuestion of taste. Greetings Jarmo
Re: [expert] KDE 2.1.1 broke my setup
On Tuesday 10 April 2001 16:02, you wrote: Nice. I upgraded to kde 2.1.1 and it broke my setup. No Kmenu, no Kcontrol (if I start it, there are no modules). I deleted my .kde directory in hopes that logging back in would fix all of it. Nope, nothing. What is the fix? Without the menu items, I may as well be using the most rudimentary window manager possible. HI Did you upgrade by following Benjamin's instructions or something else? I followed intructions exactly and for security did first rpm -Uvh --test *.rpm. Got some depency proplems...Downloaded missing files from cooker,ins- talled them,again rpm -Uvh --test *.rpm...got some conflicting things deleted conflicting files...again rpm -Uvh --test *.rpm...No depencies,no conflict...Then rpm -Uvh *.rpmAll needed files copied first in temporary dirLike Benjamin adviced VOILA' now I have working KDE 2.1.1 in Mandrake 7.2 with kernel 2.2.19 from kernel.org..so far...-) Greetings Jarmo [EMAIL PROTECTED] PS.Had original FIRST mandrake distribution version of 7.2,only kernel changed into 2.2.19
Re: [expert] Hamradio
Hi Yes...they work here also fine in 7.2 with kernel 2.2.18 Tried kernel 2.4.2 and found that 6Pack iznogood there.And that's what I use instead of kiss.. Jarmo oh1mrr.
[expert] Fwd: Anacron job 'cron.daily'
-- Forwarded Message -- Subject: Anacron job 'cron.daily' Date: Tue, 6 Mar 2001 16:14:32 +0200 (EET) From: [EMAIL PROTECTED] (Anacron) To: [EMAIL PROTECTED] DB2 problem...: missing or empty key value specified --- Hi Can someone of you tell me what causes message above... It's coming every dayHave tried to look everywhere and found zero...(read...I have not skills to solve this alone)! I have not found anything what could be unfunctional so propably message is produced only for keeping my attention up..-) Jarmo
[expert] Logrotate problem solved
Hi Just found reason,why logrotate stuck during job. Couldn't run COMPRESS from /etc/logrotate.conf because of missing PATH in /etc/crontab Now is working suberb. Jarmo
Re: [expert] Logrotate question
On Sunday 04 March 2001 15:04, you wrote: jarmo wrote: Hi I have now lost my red line how logrotate should work. Have one comp. running there vers.7.1 of mandrake. Have updated latest logrotate version from 7.1 updates. Um, can you tell me the name of the package that you used to do this with? Hi Mark Package is logrotate-3.3-9mdk.i586.rpm jarmo PS logrotate-3.5.2 version refuses to install because of old rpm package.
[expert] Logrotate question
Hi I have now lost my red line how logrotate should work. Have one comp. running there vers.7.1 of mandrake. Have updated latest logrotate version from 7.1 updates. Forinstance when running cron.daily logrotate starts ok... BUT it never stops. When looking ps ax I can see ingreasing running time. When I look /var/log I can see times changed in files what logrotate should rotate. I have set options to rotate syslog and messages daily because of growing size of both files Running here radioamateur bbs/dx-cluster and because of heavy traffig everything is written to logs... So have anybody seen this kind of behaviour of logrotate? If positive,please information how to get it working properly. No need to succes,that we should upgrade to vers 7.2... Because of time limitation,the work to be done to get all working as well as it's doing at the moment,is not worth. So simple twisted modell what's wrong with logrotate... MAN doesn't explain this. Regards Jarmo [EMAIL PROTECTED]
Re: [expert] New distro?
On Wednesday 31 January 2001 17:56, you wrote: Lo. Anybody has any idea when new distro is available? Quite many things have happened since 7.2 was released ( new XFree, kernel, ...), so I was wondering why isn't any announcements about new distro being worked at. Same about RedHat. Anybody has any information bout new releases coming in a radius of two months (any distros). Greetings, Antti AAARRGHH! -) Hopefully somebody has tight brakes on!My best wish is,if distro has to be released,mean new one...Best releasing moment at earliest is NEXT XMAS,not earlier,please.! There's so much to learn and configure with 7.2,I'd not like to throw this work done away...yet. There is developement version available who ever want to test it. Try it...don't hestitate win like "almost half'n product" into market. 7.2 IZGOOD...let's make it better. jarmo
Re: [expert] Why doesn't work the telnet with Mdk 7.2 after install?
Hi All I did made expert/developement install and all telnet stuff was installed,only thing what disabled its use was xinitd. Even xinitd daemon started and telnetd started telnet didn't work. But when I started INITD instead of XINITD telnet worked. Jarmo
Re: [expert] webmin wont work
On Sunday 24 December 2000 06:06, you wrote: Hmm, I've been using Webmin all this time without SSL, and I can't seem to make it work WITH ssl... I have to use http://localhost:1 to connect. How do I enable SSL for Webmin? Bob Hi Try https://localhost:1 jarmo
Re: [expert] Updating 7.1 to 7.2 ... reality or fiction ?
On Saturday 09 December 2000 21:22, you wrote: Hello, world ! I'd like to update 7.1 to 7.2. Any comments, experiences, suggestions ? Thank you. I'd Say Fiction! Do not upgradeMake fresh installation...just for saving your mind. Fresh installation WORKS...with minor exeptions... Jarmo [EMAIL PROTECTED] Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] Re: Multiple Messages
On Monday 27 November 2000 18:43, you wrote: On Mon, 27 Nov 2000, Anthony Russello wrote: I am also getting repeat messages. There's plenty of semicolons to go around Yes, I'm getting multiple messages, also. Take care, - Mika On Mon, 27 Nov 2000, at 06:47, William Bouterse wrote: Apologies for the multiple messages sent by mistake However I am receiving many multiples from various individuals to this list. Is anyone else getting repeat messages? William Bouterse Talkeetna Alaska Yeah I am also getting repeat messages. You guys are lucky getting messages double...I'm getting even quadrable messages. Where's RANK XEROX? Jarmo [EMAIL PROTECTED] Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] What is preferred method for Zip 100 (paraport)
I do this way mkdir /mnt/zip modprobe ppa mount /dev/sda4 /mnt/zip That's all done by hand... In KDE I have program LOMEGA.With it I can do all wit coupe of mose clicks. You can find it at http://visionary-hawk.webjump.com jarmo [EMAIL PROTECTED] Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] soundcard problem...conflicting irq?
On Sunday 26 November 2000 08:29, you wrote: irq assignment of either one or the other but don't know how to go about this. I can't change anything on the soundcard with sounddrake. Kudzu won't let me either. Is there a simple means by which I can change the irq or the ethernet card or soundcard? praedor Hello Yesterday I found myself having same problem with es1370 and videocard. There is two ways to change:In your motherboards bios menu you manually set pci slots irqs. Or way I did..I change place of my soundcard to another pci-slot... Which caused conflict with network-card...changed again and ...voila' No conflicts anymore. This kind of actions did never happen in LM7.1...What's going on now? I'm afraid seing thist developement going TOO much for "BUG AND PRAY" And just another day I shot with shotgun my WIN98plate...damn. Jarmo [EMAIL PROTECTED] Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] 7.2 Sound problems
Be Happy I have Creative 128PCI and basically it have worked,as it's working now in LM2BUT without MIDI. I remember i had difficulties with midi in LM7.0 also,but in LM7.1 everything worked ok.So something wrong with 7.2 must be seen similar messages here earlier (about midi),not seen any helpful answer. Is it so,that everytime you update your distro you'd have bunch of replacement hw,in case some modell does not work,thus it have worked earlier?...JUST KIDDING! But as said I have some sounds working...hope somebody finds solution for midis.I have not so much skill,to find what's wrong. jarmo [EMAIL PROTECTED] Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] webmin: local host connection broken
Hello Try https://localhost:1 or https://newlocalhost:1 Here it works Jarmo [EMAIL PROTECTED] Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] LM 7.2 Filemanager (Konqueror) savings
On Saturday 04 November 2000 15:29, you wrote: Hello List, Does anyone know how to get Konqueror to save settings? I have tried everything I can think of but I keep getting icon view and a small screen when I open the file manager. I hope I'm not stuck with that. TIA. Hello Dennis I have found solutionAt least it works here fine... First choose from wiew what you want Konqueror look like and then simply klick "window" button and choose Save Wiew Profile Management. That did the trick Greetings from Jarmo [EMAIL PROTECTED] Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] No telnet into my 7.2 box?
Hi I had same problem and after hard search found..(noticed) that LM7.2 uses XINETD...also reads XINETD.CONF...so you have to edit xinetd.con or activate INET,whic uses INETD.CONF where telnet and ftp etc are configured...Anyway I managed get telnet working by activating INET in bootup. Jarmo Keep in touch with http://mandrakeforum.com: Subscribe the "[EMAIL PROTECTED]" mailing list.
Re: [expert] Boot Logger???
Look /var/log/messages Jarmo
Re: [expert] Webmin
http://127.0.0.1:1 should ask you for a login. So also, (if lookup is hosts, DNS) should http://localhost.localdomain:1, but the use of nicknames may or may not be supported for this purpose. And no, you should not have to add anything--if inetd is running, and perl is running, then the webmin server should be communicating. Civileme This I have undestood from help...but it does not work...as in my message wrote have tried 'http://localhost:1,http://127.0.0.1:1 etc. but can't get contact...getting message as described in my message. Did I find now something that does not work here?And just posted that everything's working suberb! But this is minor problem...using linux as enduser,only having my sons win machine connected ,so he can do networking via me and I don't have to admin any huge network. Learning more all the time...maybe some day Jarmo
[expert] webmin
Hi Webmin is working! Just took NC in use and voila'. Before tried it with KFM's browser,it didn't work. Yes...it is THE MOST POWERFULL toolHave to start learning it now. Tnks for replys...now I know I'm in good hands when asking something from here. Jarmo
[expert] Webmin
Hi Just curious trying webmin,when saw couple of messages of it. Tried to connect http://localhost:1,but got answer file does not exist or acces denied. I can see webmin running,so twisted model please.. What I have to do to get connected...i.e do I need add something to inetd.conf and services? running mdk7.1 kernel 2.2.17mdk ,amd 450MHz 128M ram 10.1 + 1.2G HDs 32x cd SB 128 pci ,realtek pci ether,ati rage pro agp,us robotix sportster flash 56k external modem in ttyS1. Also radioamateur stuff compiled and in use. Boy...everythig's working suberb Jarmo
Re: [expert] any hams on here with mandrake 7
On Sat, 18 Mar 2000, you wrote: Well I don't think I have that kernel, but I'm a ham operator, N0VED. On Sat, 18 Mar 2000, Harold Hartley mewed: I'm wondering if any hams on here with mandrake 7 with ax25 enabled in kernel.. Yes Here's one...running ax25 quite successfullyNode running,can telnet via radio...Just looking for PMS-style packetradio prog for use Using LinKT and LinPAc both,but they are not exactly what I'm looking for. I'm sure that in future going to find. Compiled ax25's as a module,never have got hem working in any distro as compiled into kernel. Greetings from OH-land Jarmo
Re: [expert] any hams on here with mandrake 7
-- Forwarded Message -- Subject: Re: [expert] any hams on here with mandrake 7 Date: Sun, 19 Mar 2000 05:12:53 +0200 From: Jarmo [EMAIL PROTECTED] On Sat, 18 Mar 2000, you wrote: Well I don't think I have that kernel, but I'm a ham operator, N0VED. On Sat, 18 Mar 2000, Harold Hartley mewed: I'm wondering if any hams on here with mandrake 7 with ax25 enabled in kernel.. Yes Here's one...running ax25 quite successfullyNode running,can telnet via radio...Just looking for PMS-style packetradio prog for use Using LinKT and LinPAc both,but they are not exactly what I'm looking for. I'm sure that in future going to find. Compiled ax25's as a module,never have got hem working in any distro as compiled into kernel. Greetings from OH-land Jarmo ---
Re: [expert] Freakin' Netscape...
On Sun, 27 Feb 2000, you wrote: John Aldrich écrivit Strange thing...that I coud not remove 4.70 packages...got answer something about multiple files...? Yep. Two things that'll cause this: 1) you need to rpm -e netscape* to remove everything at once. Hi, You also can use « rpm -U netscape-common-4.72-1mdk ». This command unistall old navigator and communicator packages and update netscape-common. After that, you can install netscape-communicator OR netscape-navigator. Hi Didn't work...too much conflicts... I don't know what is wrong with my installation...did it clean after some mistakes trying upgrade MDK... Ok...most of the things are working fine...but some not. Just wondering what for there is "rpmdrake" and "kpackage",this last one have in earlier versions worked well,i.e have managed remove even older NC packages with itNot anymore,mean just these 4.7xx pack. Propably said this before that I'm in stage "expert -" so it's much uderstandable,that everything is unclear...but I'm coming,that's for sure. But it's not big deal if 4.7x vers does not work...4.61 from MDK-6.1 disk does Think all these versions are evalution ones,so some day find working one. By the way have got feeling that every distributor have big hurry to get biggest version number published,even product is not so stable Please...do not use same consept as gone with the winfirst service- pack is published before product itself. -Jarmo
Re: [expert] Freakin' Netscape...
Hi Sorry that my english is not so good.It seems that i became misundestood. Haven' said that 4.7x are not stable...The whole question is that I can't get those 4.7x versions installed. When I installed MDK 7.0 installation program installed some parts of NC but not all and I tried manually install missing parts,but always got wether depency or conflict report and have now tried to remove those package parts away to reinstall them again,haven't had succes so far. In MDK 6.1 I could remove with "kpackage" old netscape say vers. 4.6 and then afterwards install 4.61 and no errors.Why did this by method "remove-reinstall" thought that if there older vers has some bugs they can be removed also and get clean new vers instead upgraded. I allways take serious notice to every warning what I get informed by programs,but the point is,that my skills are limited to do rigth conclusions,that's why I'm writing to this list...) So once again...I have MDK 7.0 Air running VERY STABLE and question is only these minor problems,what only depeds my limited knowledge about linux-world. You guys have done great job with this distro,because even I have got it running and couple of times recompiled kernel to get some things with (radio stuff) and still starts without any errors.If I should have done all this including my huge mistakes, with WIN,I suppose never could take my HD out from computer -) MDK still running..So it can be said STABLE though :-) As said,bad knowledge in language and OS making me doing loud a much extra work,but hey...I like this...I'm sorry if my messages what ment to be questions,turned into whining. Jarmo
Re: [expert] Freakin' Netscape...
On Sat, 26 Feb 2000, you wrote: I'm pissed. I downloaded the v4.72 rpm's from the cooker archives on rpmfind and attempted to do an upgrade. I started out doing a simple rpm -Uvh netscape-common*rpm, rpm -Uvh netscape-navigator*rpm, then rpm -Uvh netscape-communicator*rpm. Rpm will bitch that the navigator and communicator packages conflict with each other, and now no matter what I do, including rpm -e on all three packages then attempt to reinstall the rpms from the mandrake 7.0 iso, netscape is absolutely non-functional. Any clues, y'all? Or should I just trash my entire / and /usr partitions and start over from scratch? -- Rich Clark Hi Just struggled with matter also...started with MDK's 4.70 packages no succes.. They were conflicting with each others...Then tried RH's 4.72...same piss... Solution Took MDK 6.1 and from there run 4.61 rpms...during installation got one output error...but no matter nc works anyway. Strange thing...that I coud not remove 4.70 packages...got answer something about multiple files...? I have tried use method PRUTAL...i.e delete all what conserns NC And found nothing related left from my desk,after search...still when trying install 4.7 versions,they conflicts.?? Hope to get OPERA working soonIn my "gone with the WIN" opera works suberb. Jarmo
[expert] sequencer
Just question Has anyone tested in mdk 7.0 "midi-karaoke-player" what comes with kde? I have now tried and no succesWhen try play a song I get reply, can't open /dev/sequencer, propably there is another program using it. ? Can't figure how to find reasonIf you gurus have found solution to this problem... Have ever got player working in any distro,allways the same report. Midi-player works ok,but this midi-karaoke doesn't. Any help? -jarmo
Re: [expert] Netsacpe problems
Hi All On Sun, 06 Feb 2000, you wrote: Harshal Pradhan wrote: java, Netscape often just freezes though the process is still running and taking a lot of CPU. Also noticed that when opening NC it reserves loud a much memory,but after shutting down NC ,all taken memory stays reservedAnyway resource- meter does not show any movement downwards.I just upgraded memory from 64 to 128 and was no need to add to lilo.conf any extra append line. Using mdk 7.0 in amd 450Mhz 128 ram 11G hd...eth0 as realtek ,soundcard sound- blaster 128 pci,external modem UsRob Sportster Flash 56k. Welcome to the club.. mdk 6.1 here.. I just got used to opening a term and killall -9 netscape.. I ain't got an answer for ya.. But if you DO find one, I would SURE like to hear it.. :) Alan -- == [EMAIL PROTECTED] ([EMAIL PROTECTED]) running Linux Mandrake 6.1 and/or BeOS. Yes much intrested of answer Jarmo [EMAIL PROTECTED] Running LM 7.0 or win9898% LM
Re: [expert] Netsacpe problems
Using here KDE and closing NC normally...ie. exit. Funny thing happened,when installing 7.0,install program didn't do the job well,just left NC partly uninstalled,and when tried install it afterwards by hand there allways were some depecies that coudn't install...But I cleaned all NC stuff from LM and installed from LM 6.1 older 4.61 NC and that installation workedHaven't try update to 4.7...Nc works anyway,so much that I can spend too much time in net..according my phone bills. As someone wrote earlier,I have got help from this list before asked just much...biiig thanks. Main thing is,that have got LM working without any err reports in startup logs...thats something,which proves,that after short time LM is confirureable for everyoneComparing to myself...I'm not newbie...but let's say "expert -" By the way..LM is first distro where I have got hamradio stuff working with first try. Jarmo
