Re: [gentoo-user] dispatch-conf and binary files borkage
Bastian Balthazar Bux wrote: see bug 69869 . After an emerge -e runned as usually dispatch-conf , but keyboard in xorg stopped working. discovered that this happen because dispatch-conf ( rcs ) doesn't handle very well binary files. Now I've two question: 1) does this happen also to you ? try run cd /etc grep -rls ' /etc/config-archive' * (the previous two lines are commands but xorg has no diesis sign at the moment) 2) Has anyone idea on how to solve this ? I prefere dispatch-conf to etc-update and if it's possible have it usable ... That is the reason I don't use dispatch-conf. This extra that it would add to my /etc/init.d files would prevent the init file from starting. I just stick with etc-update and carefully check the differences in the new file and my old file before telling it to keep my old file or use the new one. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] revdep-rebuild always emerges the same package
John Myers wrote: On Thursday 31 March 2005 11:49, Grant wrote: | | I always get the same thing from revdep-rebuild, no matter how | | many times it emerges blackdown-jdk: | | This is one of the many reasons you shouldn't use binary packages. | | I didn't think I was. I don't think I've ever used an 'emerge -K' | command. Blackdown is shipped as a binary. blackdown isn't in my world file so something must need it. What can I do about the revdep-rebuild problem? You can't. See this: http://bugs.gentoo.org/show_bug.cgi?id=62644 -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Problem With Tulip Module
Jerry McBride wrote: On Saturday 26 March 2005 09:25 pm, Kathy Wills wrote: I've tried everything I can find by googling. Tried the forums. Can't find anything that solves the issue. I have noapic as a kernel parameter in grub. I still get this error in dmesg: tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. eth0: ADMtek Comet rev 17 at d12c8000, 00:03:6D:1D:89:41, IRQ 9. ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) :02:0d.0: tulip_stop_rxtx() failed eth0: Setting half-duplex based on MII#1 link partner capability of 0021. Here is the relevant result of lspci-vv: :02:0d.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11) Subsystem: Linksys: Unknown device 0570 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32 (63750ns min, 63750ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at d000 Region 1: Memory at ed80 (32-bit, non-prefetchable) [size=1K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Here is the result of mii-diag: Using the default interface 'eth0'. Basic registers of MII PHY #1: 1000 786d 0022 5410 01e1 0021 0004 2001. Basic mode control register 0x1000: Auto-negotiation enabled. You have link beat, and everything is working OK. Your link partner is generating 10baseT link beat (no autonegotiation). End of basic transceiver information. Does anyone have anymore ideas on what to try to get rid of the tulip_stop_rxtx() failed problem? The patches I found by googling this error didn't work. What kernel version are you running? Tulip reports version 1.1.13 with this kernel, 2.6.11. I've run my linksys cards with most 2.2.x and all 2.4.x an 2.6.x version kernels and never saw your reported error message. The config file in 2.6.11 has a couple of configure options that may be of help to you. Cheers Kernel version is 2.6.11-r4. I'm using the tulip module that I have always used. From kernel .config: # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m CONFIG_TULIP_MWI=y CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Problem With Tulip Module
Jerry McBride wrote: On Sunday 27 March 2005 05:04 am, Kathy Wills wrote: ---big snip--- Kernel version is 2.6.11-r4. I'm using the tulip module that I have always used. From kernel .config: # Tulip family network device support # CONFIG_NET_TULIP=y CONFIG_DE2104X=m CONFIG_TULIP=m CONFIG_TULIP_MWI=y CONFIG_TULIP_MMIO=y CONFIG_TULIP_NAPI=y CONFIG_TULIP_NAPI_HW_MITIGATION=y CONFIG_DE4X5=m CONFIG_WINBOND_840=m CONFIG_DM9102=m Did some googling and it seems that the error message can be ignored, unless of course it's giving you operational problems. From what I have read, it appears to be a hardware mix problem involving dma issues. Over here I run MSI, SOYOTEC and ABIT motherboards and as I mentioned in my previous email, no such error message has turned up in either messages or dmesg output. Try pulling the linksys card, clean the edge and slap in back into the motherboard in a different slot. Didn't solve the issue. I guess as soon as I can, I'll have to get a different motherboard in order to solve this. Either that or a different network card. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
[gentoo-user] Problem With Tulip Module
I've tried everything I can find by googling. Tried the forums. Can't find anything that solves the issue. I have noapic as a kernel parameter in grub. I still get this error in dmesg: tulip0: MII transceiver #1 config 1000 status 786d advertising 01e1. eth0: ADMtek Comet rev 17 at d12c8000, 00:03:6D:1D:89:41, IRQ 9. ohci_hcd: 2004 Nov 08 USB 1.1 'Open' Host Controller (OHCI) Driver (PCI) :02:0d.0: tulip_stop_rxtx() failed eth0: Setting half-duplex based on MII#1 link partner capability of 0021. Here is the relevant result of lspci-vv: :02:0d.0 Ethernet controller: Linksys NC100 Network Everywhere Fast Ethernet 10/100 (rev 11) Subsystem: Linksys: Unknown device 0570 Control: I/O+ Mem+ BusMaster+ SpecCycle- MemWINV+ VGASnoop- ParErr- Stepping- SERR- FastB2B- Status: Cap+ 66Mhz- UDF- FastB2B+ ParErr- DEVSEL=medium TAbort- TAbort- MAbort- SERR- PERR- Latency: 32 (63750ns min, 63750ns max), cache line size 08 Interrupt: pin A routed to IRQ 9 Region 0: I/O ports at d000 Region 1: Memory at ed80 (32-bit, non-prefetchable) [size=1K] Capabilities: [c0] Power Management version 2 Flags: PMEClk- DSI- D1+ D2+ AuxCurrent=0mA PME(D0+,D1+,D2+,D3hot+,D3cold+) Status: D0 PME-Enable- DSel=0 DScale=0 PME- Here is the result of mii-diag: Using the default interface 'eth0'. Basic registers of MII PHY #1: 1000 786d 0022 5410 01e1 0021 0004 2001. Basic mode control register 0x1000: Auto-negotiation enabled. You have link beat, and everything is working OK. Your link partner is generating 10baseT link beat (no autonegotiation). End of basic transceiver information. Does anyone have anymore ideas on what to try to get rid of the tulip_stop_rxtx() failed problem? The patches I found by googling this error didn't work. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] gdm login problem
pat wrote: Hi all, I want to use gdm as display manager, so I emerged the gdm and the rest of the gnome (precisely gnome-light) and followed the instruction in documentation (gnome-config.xml). After restart the gdm comes up but after typing user name (trying root - I know its risky on the net, but I just playing), an error dialog appers with message Authentication failed. I look at gdm log but there is nothing :-( Could someone help ??? Thanks Pat P.S. System is Gentoo 2004.3, kernel 2.6.10, gnome 2.8.2. If you are using -pam, then you need a patch for gdm before it will work. I switched to xdm so I can keep my -pam without having to worry about a patch. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Stupid Gensplash question
Chris Hoover wrote: Kathy Wills wrote: Which version of splashutils are you using? I'm using splashutils-0.9.1, I have an nVidia Geforce FX 5200, using kernel 2.6.11-r4. With this version, you need to make a copy of /usr/share/TTF/luxisri.ttf in /etc/splash to make this work. I had to change what I had in my grub.conf too. Here is what I had to change it to on my system: kernel /vmlinuz ro root=/dev/hda3 video=vesafb:[EMAIL PROTECTED] splash=silent,fadein,tty:8,theme:emergence quiet CONSOLE=/dev/tty1 initrd /boot/fbsplash-emergence-1024x768 This works for me. You may be using something besides vmlinuz on yours. Set it accordingly. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Everything (seems to) has disappeared from Thunderbird
Holly Bostick wrote: Hareesh Nagarajan wrote: Hi All: After completely fixing a problem with my new memory stick, everytime I open Mozilla Thunderbird I am presented with complete emptiness. Check this screenshot out: http://cs.uic.edu/~hnagaraj/tbird.png I even tried to create a new profile, by doing this: $thunderbird-bin -P and nothing really happens. My ~/.thunderbird/* seems to have all my email, account information and the pref.js file. Any idea what I must do to get all my email back? Thanks, Hareesh Looking at your screenshot, it shows a little box that looks like a folder at the right hand corner of the pane where your folder listing should be. What does clicking on that do? I've had a similar problem before seems like I had to click on that folder and then remove some ? marks. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Re: NVidia on Riva TNT2
Ed Jabbour wrote: On Monday 31 January 2005 03:52 am, Neil Bothwick wrote: On Sun, 30 Jan 2005 21:26:36 -0500, Ed Jabbour wrote: cp /etc/X11/xorg.conf xorg.conf.orig just in case etc-update whacks it etc-update won't whack it. You may when running etc-update but the program itself never does harm. Yes, I know. However, the two xorgs seem to have different file paths for RGB, so etc-update must be run. I think that's the case, anyway. At any rate, backups never hurt. I'm running the latest version of xorg-x11. I have a tnt2 card and use the 6111 versions of nvidia. The problem may be in your xorg.conf because I'm not having any problem getting nvidia to work. I use udev not devfsd. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] problems with euse
Jadex wrote: Hello there : I'm using portage version 2.0.51-r3 (I upgraded from a previous version) en now any time I use euse it complains about some reading permissions, the exact message is: EUSE exiting with following errors: requires read permissions for /etc/make.profile/../use.desc. requires read permissions for /etc/make.profile/../use.local.desc. If you are going to use encryption for your signature, would you please check out this guide: http://www.gentoo.org/doc/en/gnupg-user.xml Your emails come through with encrypted signature that cannot be found on the keyservers. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] mod_perl for Apache1
Joseph A. Nagy, Jr. wrote: Why is mod_perl for Apache1 not in portage? Please if you are going to use an encrypted signature please register it. Unable to find on key servers. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] Firefox or Xorg font rendering?
James Hiscock wrote: I've got a GTK Styles and Fonts applet in my KDE Control Center, but I'm not sure what package I installed to get it (if any - might be standard in the current KDE releases)... that should do what you want it to do, I think... No need for a daemon for KDE, AFAIK. This is because of the gtk-qt-engines package. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- gentoo-user@gentoo.org mailing list
Re: [gentoo-user] grub: error 8
larryB wrote: I'm about ready to throw up my hands and go back to redhat/debian/bsd, or something that's merely difficult but not impossible. many thanks, Bill Jenkins [EMAIL PROTECTED] That's funny to me. I am not having that much trouble with gentoo. The problems I do run into, I can usually find my answers either here, in the forum, or http://bugs.gentoo.org. The time I tried Linux from scratch, I ran into problems compiling some of the basics and never did find an answer to solve it. I'll stick with Gentoo. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] xfree fails with kernel 2.6.3-rc2-mm1
Jakob Schiøtz wrote: Hi! I (finally) decided to try the 2.6 kernels, but I ran into a problem. X cannot start, I get the following messages in dmesg, and I only see the nVidia spash screen, then it is back in text-mode. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. atkbd.c: Unknown key released (translated set 2, code 0x7a on isa0060/serio0). atkbd.c: This is an XFree86 bug. It shouldn't access hardware directly. I am using the nvidia driver (the xfree one does not work with this card), and I have the problem both with version 1.0.4496-r3 and 5336-r1 (both work fine with the vanilla 2.4.23 kernel). I am using the latest xfree (4.3.0-r5). My machine is a Dell Inspiron 5150 laptop with an nVidia gforce graphics adapter. Does anyone know what could be causing this? Thanks for any help! Jakob Did you try reinstalling nvidia? -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] geneology site
[EMAIL PROTECTED] wrote: On Sat, 14 Feb 2004 11:09:48 -0600 Kathy Wills [EMAIL PROTECTED] wrote: + + Genealogy Web Site: http://www.brannanorwills.com + + + + I was going to ask you about your genealogy site, but it appears to be down. My sister has gone into near ocd over our family history and I was going to suggest the phpgedview stuff to her, and wondered if you had tried it. I just checked my site is working just fine. No I haven't tried the phpgdedview stuff. I use windows software called Legacy to keep track of all my stuff. I haven't found anything Linux that works as good. I use win4lin windowsme setup through which Legacy works just great. The standard version of Legacy is free. I use the deluxe version though. The closest I've found in Linux to Legacy is one called Gramps. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Setting up 2.6 system from scratch
Collins Richey wrote: Others may speak up, but from my readings, your don't want to touch udev with a fork - it's not ready to come out of the oven. devfs may be deprecated, but it still works just fine. Of course, if you want to be on the cutting edge, jump right in. You have been warned. Gentoo will no doubt offer udev when it's ready for public consumption. I have udev working just fine using the howtos found in gentoo forums. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Setting up 2.6 system from scratch
Collins Richey wrote: Cool. Does it do anything for you that devfs doesn't? I haven't noticed any difference other that it doesn't change (on my system anyway) a lot of the names of devices like devfs did. If I want for example /dev/hda3, I don't have to go looking for it under /dev/ide/host0/bus0/target0/lun0/part3. I just look for /dev/hda3. It makes it a lot easier for me. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Setting up 2.6 system from scratch
Brett I. Holcomb wrote: Devfs will keep the old names. My /etc/devfsd.conf file has a setting that tells it to keep old names and it was on by default. When I used devfs I chose that setting and still it did strange things (as far as I was concerned) to names of devices. Udev does it just the way I like it. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] portage||emerge problem
ZsoL wrote: Hi! After emerging something, i get the following: * Processed 391 info files: 5 errors; run with emerge --verbose to view errors. Even though, everything works just fine. Anybody can help me how to get rid of this error? I have had this same thing for a while now. Nothing has been found to get rid of it. Everything runs and works fine so I don't even worry about it. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Is Gentoo female?
LoneStar wrote: I tried installing it on a PIII system from both the i686 and pentium3 live CDs and all I could get was seg faults when trying to untar the stages (I tried all 3). During this process, I swapped out all hardware but the problem persisted. What PIII are you using? I am using a PIII without any problem. I have an intel board with Award bios and intel pIII 700. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Kernel 2.6.2 + Latest nVidia driver= Unable to initialize kernel module - a solution
Mitchell James wrote: I was having problems with making a working system using the latest Linux kernel and nvidia driver. When the kernel module was loaded there where no /dev/nv* entries. Trying to start X resulted in Unable to initialize kernel module messages. Yet it was working in a 2.4.23 kernel on the same machine. I finally realized that the only major difference between the two kernels was that I had not enabled /devfs in 2.6.2 because it is obsolete. I recompiled with it enabled and it worked as well as with the 2.4.23 kernel. -- Enable /devfs for 2.6.2 kernels and nvidia. I am not using devfs with my 2.6.2 kernel using nvidia. I use udev. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Portage update
Anthony Hoppe wrote: Is it safe to update Portage? I've been reading about the problems some people have been having. Has anybody been successful with the update? Should I update? ~ Anthony I didn't have any problems with it. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Bugs in the new portage?? (I guess I have to reinstall my system) :(
Susie wrote: Total bytes read: 1693246 wrote 3925 bytes read 1693246 bytes 45257.89 bytes/sec total size is 57701810 speedup is 34.00 Updating Portage cache... ...done! These are the packages that I would merge, in order: Calculating world dependencies /Traceback (most recent call last): File /usr/bin/emerge, line 2513, in ? if not mydepgraph.xcreate(myaction): File /usr/bin/emerge, line 1105, in xcreate myeb=portage.portdb.xmatch(bestmatch-visible,mydep) File /usr/lib/portage/pym/portage.py, line 4673, in xmatch myval=best(self.xmatch(match-visible,None,mydep,mykey)) File /usr/lib/portage/pym/portage.py, line 4684, in xmatch myval=match_from_list(mydep,self.xmatch(list-visible,None,mydep,mykey )) File /usr/lib/portage/pym/portage.py, line 3531, in match_from_listraise KeyError, Specific key requires an operator (%s) (try adding an '=') % (mydep) KeyError: Specific key requires an operator (dev-libs/elfutils-0.84) (try adding an '=') bash-2.05b$ Just curious as to which version of portage it was. There is a bug report already filed on portage version 2.0.50 that was a available this morning. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] xmms-1.2.9-r2
Has anyone been able to update to xmms-1.2.9-r2. The ebuild seems to be having trouble finding all the patches. It is looking for xmms-1.2.9-gentoo-patches-0.5.tar.bz2 and can't find it. I haven't been able to find it on any of the mirrors either. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] xmms-1.2.9-r2
Timothy Grant wrote: I'm having the exact same problem. There has now been a bug report filed on this see http://bugs.gentoo.org/show_bug.cgi?id=40487 but no resolution yet to the problem. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Anyone successfully emerged kdebase-3.2.0?
Manuel McLure wrote: I'm having problems emerging kdebase-3.2.0 - it keeps failing when building the userguide with docbook (everything else seems to succeed) - has anyone seen this and have a solution? Thanks! It compiled for me just fine after I made the adjustment to ebuild based on this bug report. http://bugs.gentoo.org/show_bug.cgi?id=40326 -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Nvidia-kernel 5336-r1
Collins Richey wrote: On my AthlonXP with VIA chipset, I cannot use AGP (either kernel or nvidia option) or nvidia (4496 or earlier levels) locks up tighter than a drum. I wish that nvidia knew what the [EMAIL PROTECTED] they were doing when it comes to coding. When I first switched to Gentoo, I tried using the ebuilds for the nvidia kernel and glx and couldn't get them to work right even with the command opengl-update nvidia. I use the Nvidia packages from nvidia.org and have never had any trouble with them other than when I updated to the linux 2.6 kernel and they hadn't made one yet for that kernel. In this case, I found the patched one for this kernel by searching the forum. I have had to make some adjustments to pam console configuration and search for and removed or rename some of the libraries that were installed by Mesa. All of this is mentioned in the readme from nvidia. I just this morning downloaded and installed NVIDIA-Linux-x86-1.0-5336-pkg1.run from nvidia.org and it installed and is running without any problems. I have a Riva TNT2 card -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Nvidia-kernel 5336-r1
Collins Richey wrote: Collins Richey wrote: But do you have a VIA chipset? No mine is not a VIA chipset. I have an AWARD bios. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Issue with grub-0.93.20031222
Eduardo Silva wrote: Hi, I did an emerge -uD world today, and it upgraded my grub package to grub-0.93.20031222. When I tried rebooting, and without changing anything in my config, I only go into the grub prompt. It doesn't display the menu, although from the prompt I am able to give the kernel loading and booting command. I tried to do the usual root (hd0,1) and setup (hd0), and everything goes without a glitch, but then now I always go to the grub . What can I try next? BR, This is a bug that has been reported. It is being worked on. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] ALSA or timidity++ compile error
Jakub Krajcovic wrote: Hi folks, I emerged timidity++ and one of the use flags was alsa. I have alsa 1.0.1 installed and I get this error when trying to merge: gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../timidity -I../libarc -I../utils -I/usr/local/include -I/usr/X11R6/include -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -DENABLE_SHERRY -DAU_OSS -DAU_ALSA -DAU_VORBIS -I/usr/include -DSHARED_LIB_EXT=\.so\ -DSHLIB_DIR=\/usr/lib/timidity\ -DSUPPORT_SOCKET -DSUPPORT_SOUNDSPEC -DWRDT_X -DPKGDATADIR=\/usr/share/timidity\ -DPKGLIBDIR=\/usr/lib/timidity\ -DDEFAULT_PATH=\/usr/share/timidity\ -DTIMIDITY_OUTPUT_ID=\s\ -O2 -march=athlon-xp -pipe -msse -mmmx -m3dnow -fomit-frame-pointer -c `test -f server_c.c || echo './'`server_c.c source='alsaseq_c.c' object='alsaseq_c.o' libtool=no \ depfile='.deps/alsaseq_c.Po' tmpdepfile='.deps/alsaseq_c.TPo' \ depmode=gcc3 /bin/sh ../depcomp \ gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../timidity -I../libarc -I../utils -I/usr/local/include -I/usr/X11R6/include -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -DENABLE_SHERRY -DAU_OSS -DAU_ALSA -DAU_VORBIS -I/usr/include -DSHARED_LIB_EXT=\.so\ -DSHLIB_DIR=\/usr/lib/timidity\ -DSUPPORT_SOCKET -DSUPPORT_SOUNDSPEC -DWRDT_X -DPKGDATADIR=\/usr/share/timidity\ -DPKGLIBDIR=\/usr/lib/timidity\ -DDEFAULT_PATH=\/usr/share/timidity\ -DTIMIDITY_OUTPUT_ID=\s\ -O2 -march=athlon-xp -pipe -msse -mmmx -m3dnow -fomit-frame-pointer -c `test -f alsaseq_c.c || echo './'`alsaseq_c.c alsaseq_c.c: In function `alsa_seq_open': alsaseq_c.c:117: `SND_SEQ_OPEN_IN' undeclared (first use in this function) alsaseq_c.c:117: (Each undeclared identifier is reported only once alsaseq_c.c:117: for each function it appears in.) alsaseq_c.c:117: too few arguments to function `snd_seq_open' alsaseq_c.c: In function `alsa_create_port': alsaseq_c.c:122: storage size of `pinfo' isn't known alsaseq_c.c:128: `SND_SEQ_GROUP_DEVICE' undeclared (first use in this function) alsaseq_c.c: In function `do_sequencer': alsaseq_c.c:565: `SND_SEQ_EVENT_PORT_USED' undeclared (first use in this function) alsaseq_c.c:575: `SND_SEQ_EVENT_PORT_UNUSED' undeclared (first use in this function) make[3]: *** [alsaseq_c.o] Error 1 make[3]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1/interface' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1/interface' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1' make: *** [all] Error 2 !!! ERROR: media-sound/timidity++-2.12.0-r3 failed. !!! Function src_compile, Line 75, Exitcode 2 !!! (no error message) Now, I mailed this to Jaroslav Kysela (the ALSA maintainer and he pointed me to this link: http://www.mail-archive.com/[EMAIL PROTECTED]/msg09892.html and in accordance with this mail I added the #define's to my alsa/asoundlib.h file. Doing this actually fixed ALSA compilation error I had with SDL-1.2.6, (that was great) but the timidity++ error is still there... Does anyone have a clue? To me it looks like an alsa problem... but that'a about all I can say :-( See http://bugs.gentoo.org/show_bug.cgi?id=35457. I fixed the same problem by getting the cvs of timidity and emerging it. I had to make a tar.bz2 file out of the cvs. It emerged without a problem after changed the ebuild and put it in my portage overlay directory. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] How To Use CVS To Build TiMidity++
I get the following error when trying to build TiMidity++: gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../timidity -I../libarc -I../utils -I/usr/local/include -I/usr/X11R6/include -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -DENABLE_SHERRY -DAU_OSS -DAU_ALSA -DAU_ESD -DAU_VORBIS -I/usr/include -DSHARED_LIB_EXT=\.so\ -DSHLIB_DIR=\/usr/lib/timidity\ -DSUPPORT_SOCKET -DSUPPORT_SOUNDSPEC -DWRDT_X -DPKGDATADIR=\/usr/share/timidity\ -DPKGLIBDIR=\/usr/lib/timidity\ -DDEFAULT_PATH=\/usr/share/timidity\ -DTIMIDITY_OUTPUT_ID=\s\ -march=pentium3 -O2 -funroll-loops -pipe -c `test -f alsaseq_c.c || echo './'`alsaseq_c.c In file included from alsaseq_c.c:48: /usr/include/sys/asoundlib.h:1:2: warning: #warning This header is deprecated, use alsa/asoundlib.h instead. alsaseq_c.c: In function `alsa_seq_open': alsaseq_c.c:117: error: `SND_SEQ_OPEN_IN' undeclared (first use in this function) alsaseq_c.c:117: error: (Each undeclared identifier is reported only once alsaseq_c.c:117: error: for each function it appears in.) alsaseq_c.c:117: error: too few arguments to function `snd_seq_open' alsaseq_c.c: In function `alsa_create_port': alsaseq_c.c:122: error: storage size of `pinfo' isn't known alsaseq_c.c:128: error: `SND_SEQ_GROUP_DEVICE' undeclared (first use in this function) alsaseq_c.c: In function `do_sequencer': alsaseq_c.c:565: error: `SND_SEQ_EVENT_PORT_USED' undeclared (first use in this function) alsaseq_c.c:575: error: `SND_SEQ_EVENT_PORT_UNUSED' undeclared (first use in this function) make[3]: *** [alsaseq_c.o] Error 1 make[3]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1/interface' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1/interface' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1' make: *** [all] Error 2 !!! ERROR: media-sound/timidity++-2.12.0-r3 failed. !!! Function src_compile, Line 75, Exitcode 2 !!! (no error message) According to gentoo bug #35457 the latest cvs of timidity will build and install. I emerged cvs and got the cvs version of timidity. I've never used cvs before and I'm not understanding how to emerge the cvs version. Do I need to create an ebuild for the cvs version before it will use the cvs version? I tried creating a tar.bz2 out of the cvs of timidity. Emerge still wants to use the one that does not build. I'm not sure what I'm doing wrong. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] How To Use CVS To Build TiMidity++
Kathy Wills wrote: I get the following error when trying to build TiMidity++: gcc -DHAVE_CONFIG_H -I. -I. -I.. -I.. -I../timidity -I../libarc -I../utils -I/usr/local/include -I/usr/X11R6/include -I/usr/include/gtk-1.2 -I/usr/include/glib-1.2 -I/usr/lib/glib/include -DENABLE_SHERRY -DAU_OSS -DAU_ALSA -DAU_ESD -DAU_VORBIS -I/usr/include -DSHARED_LIB_EXT=\.so\ -DSHLIB_DIR=\/usr/lib/timidity\ -DSUPPORT_SOCKET -DSUPPORT_SOUNDSPEC -DWRDT_X -DPKGDATADIR=\/usr/share/timidity\ -DPKGLIBDIR=\/usr/lib/timidity\ -DDEFAULT_PATH=\/usr/share/timidity\ -DTIMIDITY_OUTPUT_ID=\s\ -march=pentium3 -O2 -funroll-loops -pipe -c `test -f alsaseq_c.c || echo './'`alsaseq_c.c In file included from alsaseq_c.c:48: /usr/include/sys/asoundlib.h:1:2: warning: #warning This header is deprecated, use alsa/asoundlib.h instead. alsaseq_c.c: In function `alsa_seq_open': alsaseq_c.c:117: error: `SND_SEQ_OPEN_IN' undeclared (first use in this function) alsaseq_c.c:117: error: (Each undeclared identifier is reported only once alsaseq_c.c:117: error: for each function it appears in.) alsaseq_c.c:117: error: too few arguments to function `snd_seq_open' alsaseq_c.c: In function `alsa_create_port': alsaseq_c.c:122: error: storage size of `pinfo' isn't known alsaseq_c.c:128: error: `SND_SEQ_GROUP_DEVICE' undeclared (first use in this function) alsaseq_c.c: In function `do_sequencer': alsaseq_c.c:565: error: `SND_SEQ_EVENT_PORT_USED' undeclared (first use in this function) alsaseq_c.c:575: error: `SND_SEQ_EVENT_PORT_UNUSED' undeclared (first use in this function) make[3]: *** [alsaseq_c.o] Error 1 make[3]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1/interface' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1/interface' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/timidity++-2.12.0-r3/work/TiMidity++-2.12.0-pre1' make: *** [all] Error 2 !!! ERROR: media-sound/timidity++-2.12.0-r3 failed. !!! Function src_compile, Line 75, Exitcode 2 !!! (no error message) According to gentoo bug #35457 the latest cvs of timidity will build and install. I emerged cvs and got the cvs version of timidity. I've never used cvs before and I'm not understanding how to emerge the cvs version. Do I need to create an ebuild for the cvs version before it will use the cvs version? I tried creating a tar.bz2 out of the cvs of timidity. Emerge still wants to use the one that does not build. I'm not sure what I'm doing wrong. Never mind. I got it working by creating a new ebuild for it in my portage overlay directory. It compiled and installed just fine. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Problems With K3b
Is anyone else having any problems using k3b? Since upgrading to kde-3.2_rc1, I am getting these errors like the following from debug with k3b: System --- K3b Version: 0.10.3 KDE Version: 3.2.0 RC1 QT Version: 3.2.3 cdrecord comand: --- /usr/bin/cdrecord -v gracetime=2 dev=/dev/hdd speed=4 -dao driveropts=burnfree -eject -data -tsize=7282s - mkisofs --- 7282 /usr/bin/mkisofs: Resource temporarily unavailable. cannot fwrite 2048*1 mkisofs comand: --- /usr/bin/mkisofs -gui -graft-points -V K3b data project -volset -A K3B THE CD KREATOR VERSION 0.10.3 (C) 2003 SEBASTIAN TRUEG AND THE K3B TEAM -P -p K3b - Version 0.10.3 -sysid LINUX -volset-size 1 -volset-seqno 1 -sort /tmp/kde-kathy/k3boSkD3a.tmp -r -hide-list /tmp/kde-kathy/k3bW28lob.tmp -l -iso-level 2 -path-list /tmp/kde-kathy/k3bcCFjMa.tmp I can create and burn cd's using the commandline for cdrecord just fine. I tried re-emerging k3b, cdrtools and cdrdao but it didn't solve the problem. I can't find where anyone else is having the same problem with k3b. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Patch for libcdio mjpegtools
I got the patch to fix the install-info: warning: no info dir entry in `/usr/share/info/*libcdio*.info.gz' message. The ebuild for libcdio does not use any patches. I've never done this before. How do I get the ebuild to apply the patch? I've tried looking at some of the ebuilds that do use patches. I'm still not sure what I need to add to the libcdio ebuild to get it to apply the patch. Or do I expand the tar.gz file, apply the patch, and then make a new tar.gz file? I still haven't found any patches anywhere to fix the following: install-info: warning: no info dir entry in `/usr/share/info/mjpeg-howto.info.gz' install-info: warning: no info dir entry in `/usr/share/info/mjpeg-howto.info-1.gz' install-info: warning: no info dir entry in `/usr/share/info/mjpeg-howto.info-2.gz' install-info: warning: no info dir entry in `/usr/share/info/mjpeg-howto.info-3.gz' Has anyone else had any luck at finding a patch or fix for the mjpegtools errors? I know there was a thread regarding this earlier, but I don't think it was ever resolved. The errors don't seem to cause any problems. It is just annoying to get the message that there are errors. Unmerging and remerging don't solve it. I've tried that already. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] modem keeps hanging up
Norbert Kamenicky wrote: I am not familiar with wvdial, but used diald in a past. In case of problems I always identified it in logs, so let's have a look at logs too. If it's not sufficient, check if debug flag of wvdial is on and/or increase log level. Run emerge -f some_pkg at first, it's doing append by default, but it will not auto start after the fail. To have such functionality u have to make a simple script for it. Anyway from your message it's not clear if your inet connection works even for short time. Check it by ping www.gentoo.org and let us now. noro I had the same problems when I tried using wvdial. I tried everything I could find in the wvdial manuals, faqs, and from searching the web. Nothing worked to solve it. I ended up installing kdenetwork so I could use kppp and had no problems with it. I no longer use dialup now as I have a satellite modem. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Emerge K3B
Robert Crawford wrote: On Saturday 17 January 2004 6:17 am, Dennis Robertson wrote: All my 2.6 kernels have worked great, except for cdburning. I've read everything I can find, followed all the instructions, and nothing has worked for k3b. At least on my system, cdburning is not solved for 2.6 kernels. After two days of struggling (and I know what I'm doing with 2.6 configurations- I've done at least 100), I gave up, and compiled a vanilla 2.4.23, enabled scsi and emulation stuff, added hdc=ide-scsi to grub.conf, labeled it cdBurning in grub, rebooted, and emerged k3b. Whole compile, reboot, and k3b install took 20 minutes, and it works perfectly. I'll wait for a few more 2.6 versions to come out before I waste more time on that again. Whenever I wish to burn cd's, I just boot to my 2.4.23, and have no problems. I have the 2.6.0 kernel from www.kernel.org installed, and configured without scsi emulation. I am using all the latest of cdrao , etc. My use flag is ~x86 -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Emerge K3B
Kathy Wills wrote: Robert Crawford wrote: On Saturday 17 January 2004 6:17 am, Dennis Robertson wrote: All my 2.6 kernels have worked great, except for cdburning. I've read everything I can find, followed all the instructions, and nothing has worked for k3b. At least on my system, cdburning is not solved for 2.6 kernels. After two days of struggling (and I know what I'm doing with 2.6 configurations- I've done at least 100), I gave up, and compiled a vanilla 2.4.23, enabled scsi and emulation stuff, added hdc=ide-scsi to grub.conf, labeled it cdBurning in grub, rebooted, and emerged k3b. Whole compile, reboot, and k3b install took 20 minutes, and it works perfectly. I'll wait for a few more 2.6 versions to come out before I waste more time on that again. Whenever I wish to burn cd's, I just boot to my 2.4.23, and have no problems. I have the 2.6.0 kernel from www.kernel.org installed, and configured without scsi emulation. I am using all the latest of cdrao , etc. My use flag is ~x86 Forgot to say that k3b is working just fine. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] emerge errors, important?
Ian Truelsen wrote: After the latest world update, I get this after every emerge: * Regenerating GNU info directory index... install-info: warning: no info dir entry in `/usr/share/info/g-wrap.info-2.gz' install-info: warning: no info dir entry in `/usr/share/info/g-wrap.info.gz' install-info: warning: no info dir entry in `/usr/share/info/g-wrap.info-1.gz' install-info: warning: no info dir entry in `/usr/share/info/mjpeg-howto.info-2.gz' install-info: warning: no info dir entry in `/usr/share/info/mjpeg-howto.info-3.gz' install-info: warning: no info dir entry in `/usr/share/info/mjpeg-howto.info.gz' install-info: warning: no info dir entry in `/usr/share/info/mjpeg-howto.info-1.gz' * Processed 350 info files; 7 errors. Are these errors important, or ignorable? If important, what is the fix? I've been trying to find the answer to the same thing. I'm getting the same mjpeg errors you are. Instead of the g-wrap one, I'm getting one about libcdio. I've searched everywhere and even asked in one of the forums and can't find an answer on how to solve these error messages. Everything seems to be working just fine though even with the error messages. -- Kathy Wills + + Genealogy Web Site: http://www.brannanorwills.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Questions about kernel and /etc/issue
Thomas Degris wrote: How do you do if you are using DHCP ? Thanks, Thomas Kathy Wills wrote: Davide Brini wrote: 1) When will the latest stable kernel be considered stable for gentoo (eg, when will something like vanilla-sources-2.6.x be available)? 2) I put \O (uppercase) in my /etc/issue, and put my dns domain name in /etc/dnsdomainname, but the login prompt still prints (none) for the domain name. What's wrong? Thanks I had the same problem until I fixed my /etc/hosts file like this: 127.0.0.1 localhost 192.168.0.2machinename.domainname machinename #note replace the 192.168.0.2 with whatever your network card ip is. my /etc/hostname contains only my machine name my /etc/dnsdomainname contains the domain name. Hopefully someone else can help you there. I couldn't figure it out. I needed the static ip addresses anyway for samba to work properyly for printer and file sharing on my little home network. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Mouse wheel does not work in XFree86
Tianran Chen wrote: On Sun, 11 Jan 2004, Redeeman wrote: try: Option Protocol ImPS/2 Thanks for replying. I had already tried it, but it still does not work. -- [EMAIL PROTECTED] mailing list I have to use /dev/input/mice for my optical usb mouse to work. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Errors Compiling GTKGlarea and Gle
I am having trouble compiling gtkglarea which is needed for eroaster. It is looking for gl.h and glx.h. Gle which is needed for xscreensaver is looking for gl.h and glu.h. It is my understanding that these are part of Opengl which is normally supplied by Mesa. I have an nvidia card with the package installed from the nvidia website. It is working just fine. I can run glxgears and they work. What can I do to solve this problem? Kathy -- [EMAIL PROTECTED] mailing list
[gentoo-user] Need Help With PPPD Frequent Disconnections
I'm having a lot of problems with frequent disconnections of pppd: Here is the resutl of /var/log/messages that pertains to this: Dec 19 06:53:59 gungholady Shorewall:all2all:REJECT:IN=eth0 OUT= MAC=00:03:6d:1d:89:41:00:e0:b8:16:c2:4b:08:00 SRC=192.168.1.2 DST=192.168.1.1 LEN=57 TOS=0x00 PREC=0x00 TTL=128 ID=21250 PROTO=UDP SPT=2082 DPT=53 LEN=37 Dec 19 06:55:12 gungholady Shorewall:newnotsyn:DROP:IN=ppp0 OUT= MAC= SRC=216.196.97.132 DST=216.85.14.195 LEN=52 TOS=0x00 PREC=0x00 TTL=46 ID=36062 DF PROTO=TCP SPT=119 DPT=34122 WINDOW=5792 RES=0x00 ACK FIN URGP=0 Dec 19 06:56:43 gungholady pppd[19438]: Lost compression sync: disabling compression Dec 19 06:56:46 gungholady pppd[19438]: Hangup (SIGHUP) Dec 19 06:56:46 gungholady pppd[19438]: Modem hangup Dec 19 06:56:46 gungholady pppd[19438]: Connection terminated. Dec 19 06:56:46 gungholady pppd[19438]: Connect time 18.0 minutes. Dec 19 06:56:46 gungholady pppd[19438]: Sent 70427 bytes, received 1600516 bytes. Dec 19 06:56:46 gungholady pppd[19438]: Exit. Dec 19 06:56:51 gungholady Shorewall:all2all:REJECT:IN= OUT=eth0 SRC=192.168.1.1 DST=192.168.1.2 LEN=56 TOS=0x00 PREC=0xC0 TTL=64 ID=22247 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.2 DST=207.44.156.15 LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=21259 PROTO=ICMP TYPE=8 CODE=0 ID=512 SEQ=64513 ] Dec 19 06:57:34 gungholady Shorewall:all2all:REJECT:IN= OUT=eth0 SRC=192.168.1.1 DST=192.168.1.2 LEN=56 TOS=0x00 PREC=0xC0 TTL=64 ID=22248 PROTO=ICMP TYPE=3 CODE=0 [SRC=192.168.1.2 DST=217.31.49.10 LEN=28 TOS=0x00 PREC=0x00 TTL=64 ID=21260 PROTO=ICMP TYPE=8 CODE=0 ID=512 SEQ=64769 ] Dec 19 06:58:04 gungholady pppd[19534]: pppd 2.4.1 started by kathy, uid 1000 Dec 19 06:58:04 gungholady pppd[19534]: Using interface ppp0 Dec 19 06:58:04 gungholady pppd[19534]: Connect: ppp0 -- /dev/ttyS1 Dec 19 06:58:04 gungholady pppd[19534]: Warning - secret file /etc/ppp/pap-secrets has world and/or group access Dec 19 06:58:07 gungholady pppd[19534]: Deflate (15) compression enabled Here is the /etc/ppp/options file that I have come up with using man pppd: noauth noipdefault novjccomp crtscts Here is my /etc/wvdial.conf. I have edited the login info for privacy: I have even tried Stupid mode = yes. [Dialer Defaults] Stupid mode = I Modem = /dev/ttyS1 Baud = 115200 Idle Seconds = 1800 Init1 = ATZ Init2 = ATQ0 V1 E1 S0=0 C1 D2 +FCLASS=0 ISDN = 0 Modem Type = Analog Modem Phone = *70,correctphonenumber Username = userid Password = password Help would be greatly appreciated as I am having trouble doing emerge-webrsync because of this. I can't do emerge rsync for some reason that I haven't been able to resolve so have to use emerge-webrsync. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Test Emerge of Xfree86 With Linux-headers-2.6.0-test11
Has anyone else tried this. I tried it today to see if it would work. I got the following error: making all in programs/Xserver/hw/xfree86/os-support... make[5]: Entering directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs/Xserver/hw/xfree86/os-support' making all in programs/Xserver/hw/xfree86/os-support/linux... make[6]: Entering directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs/Xserver/hw/xfree86/os-support/linux' rm -f lnx_io.o gcc -c -mno-mmx -ansi -pedantic -Wno-return-type -w -fno-stack-protector -fno-merge-constants -I../../../../../../programs/Xserver/hw/xfree86/common -I../../../../../../programs/Xserver/hw/xfree86/os-support -I. -I../../../../../../programs/Xserver/include -I../../../../../../exports/include/X11 -I../../../../../../include/extensions -I../../../../../../programs/Xserver/hw/xfree86/os-support/shared -I../../../../../.. -I../../../../../../exports/include -Dlinux -D__i386__ -D_POSIX_C_SOURCE=199309L -D_POSIX_SOURCE -D_XOPEN_SOURCE -D_BSD_SOURCE -D_SVID_SOURCE -D_GNU_SOURCE -DSHAPE -DXINPUT -DXKB -DLBX -DXAPPGROUP -DXCSECURITY -DTOGCUP -DXF86BIGFONT -DDPMSExtension -DPIXPRIV -DPANORAMIX -DRENDER -DRANDR -DGCCUSESGAS -DAVOID_GLYPHBLT -DPIXPRIV -DSINGLEDEPTH -DXFreeXDGA -DXvExtension -DXFree86LOADER -DXFree86Server -DXF86VIDMODE -DXvMCExtension -DSMART_SCHEDULE -DBUILDDEBUG -DXResExtension -DX_BYTE_ORDER=X_LITTLE_ENDIAN -DNDEBUG -DFUNCPROTO=15 -DNARROWPROTO -DHAS_MTRR_SUPPORT -DUSESTDRES -DHAVE_SYSV_IPC lnx_io.c lnx_io.c: In function `KDKBDREP_ioctl_ok': lnx_io.c:90: error: structure has no member named `rate' lnx_io.c:98: error: structure has no member named `rate' lnx_io.c:100: error: structure has no member named `rate' lnx_io.c:101: error: structure has no member named `rate' lnx_io.c:102: error: structure has no member named `rate' make[6]: *** [lnx_io.o] Error 1 make[6]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs/Xserver/hw/xfree86/os-support/linux' make[5]: *** [linux] Error 2 make[5]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs/Xserver/hw/xfree86/os-support' make[4]: *** [all] Error 2 make[4]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs/Xserver/hw/xfree86' make[3]: *** [hw/xfree86] Error 2 make[3]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs/Xserver' make[2]: *** [install] Error 2 make[2]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc/programs' make[1]: *** [install] Error 2 make[1]: Leaving directory `/var/tmp/portage/xfree-4.3.0-r3/work/xc' make: *** [install] Error 2 !!! ERROR: x11-base/xfree-4.3.0-r3 failed. !!! Function src_install, Line 590, Exitcode 2 !!! (no error message) Everything else I've tried so far has emerged with no problem. If you have tried to emerge xfree86 using the linux-headers-2.6.0-test11, have you found a way to solve this error? If so what did you do? Kathy Wills -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Domain Question
Peter Ruskin wrote: I put this in /etc/conf.d/local.start: # Set domainname so that virtual console prompts look OK. echo echo Setting domainname to ruskin /bin/domainname ruskin It works but it's ugly and shouldn't be necessary. Peter I took a look at /bin/domainname. It is a link to /bin/hostname. It opened /bin/hostname in an editor and scrolled down to the wording it looks like maybe (none) should refer to nisdomainname or ypdomainname. I'm going to try it when I reboot again and see it that resolves it without having to do the script. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Domain Question
Peter Ruskin wrote: I put this in /etc/conf.d/local.start: # Set domainname so that virtual console prompts look OK. echo echo Setting domainname to ruskin /bin/domainname ruskin It works but it's ugly and shouldn't be necessary. Peter Ok, based on what I found from the link to /bin/domainname, if you use /etc/nisdomainname instead of /etc/dnsdomainname the (none) goes away and the name shows up correctly if you have just the machine name in /etc/hostname and the domain name in /etc/nisdomainname. In my case, it shows up as machinename.domainname. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Domain Question
Redeeman wrote: i had these problems too, and the problems is that you have configured /etc/hosts wrong, i will show mine here, where it works, and i get: This is redeeman.linux.dk (Linux i686 2.6.0-test11) 16:21:13 /etc/hosts: 127.0.0.1 localhost 192.168.1.8 redeeman.linux.dk redeeman 192.168.1.8 redeeman ::1 ip6-localhost ip6-loopback fe00::0 ip6-localnet ff00::0 ip6-mcastprefix ff02::1 ip6-allnodes ff02::2 ip6-allrouters ff02::3 ip6-allhosts No my /etc/hosts was correct. It was just like yours without the ipv6 stuff and using my information of course. When I was just using the /etc/dnsdomainname was with the /etc/hostname was when I was getting the (none) after the other in the console. Doing what I said got rid of the (none). -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Domain Question
Marius Mauch wrote: Does your /etc/issue have a \O or \o ? Marius It has \o. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Domain Question
Marius Mauch wrote: On 12/12/03 Kathy Wills wrote: It has \o. \o is for NIS domainname, use \O to get the DNS domainname. Marius OK, that explains why it wasn't working for me when I was using /etc/dnsdomainname. I'll change it and go back to using that and not the /etc/nisdomainname. I hadn't made any changes to /etc/issue. It was as installed. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Domain Question
Joshua Banks wrote: --- Peter Ruskin [EMAIL PROTECTED] wrote: Only now that genone explained (thanks genone) that \o is for NIS domainname and \O for DNS domainname am I getting the right result. So Peter you simply removed the \o and replaced this with \O or added \O to the existing /etc/issue file? Thanks, JBanks I edited /etc/issue and replaced the \o with \O and returned to using the /etc/dnsdomainname and it worked. The (none) is no longer there when I go to the console. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Domain Question
When I reboot my computer to the console before typing startx, I see: machinename.privatedomain (none) Gentoo version number. Of course all of the above has the correct information, I just changed from the true for this example. My question is, why the (none)? I have the correct information in hostname and dnsdomainname files. The /etc/init.d/domainname is started when I boot. Is this possibly because I only have eth0 and no eth1 or did I miss something when I did the network configuration? -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Domain Question
Joshua Banks wrote: --- Christopher Robison [EMAIL PROTECTED] wrote: What do we need to set to get the (none) to go away? I believe that you didn't setup your etc/hosts file correctly. I could be wrong but this looks like the logical mistake. I believe your missing your machine name. Here's a copy of mine. 127.0.0.1 localhost 192.168.1.1 deadmeat.deadmeat.com deadmeat ^ ^^ machinename FQDN machinename again I probably shouldn't of used the same machinename as the domainname but it works fine, so I left it alone. Hope that helps. Sections 19 and 20 of the install guide show examples. Yes, the /etc/host file is and has been correct so that is not the answer. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] rsync error?
John GIlger wrote: Trying to run 'emerge sync' -- I keep getting time errors and a failure to connect. What does rsync error: error in socket IO (code 10) at clientserver.c(83) mean? Is the problem on my end? TIA I have been getting the same errors for over a week now. I filed a bug report. Using emerge-webrsync works just fine. I haven't been able to find out what it means either. Using emerge sync doesn't even work with my Smoothwall shut down. I would rather use emerge sync because it seems faster than emerge-webrsync. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] KDE, Firebird, Thunderbird
I am trying out Mozilla Firebird and Thunderbird. My desktop of preference is KDE. Is anyone else using this combination? I haven't been able to figure out how to open Firebird when clicking links in Thunderbird. Clicking links in Thunderbird does nothing. I can copy and paste the urls from one to the other. I've tried everything I can find on the forums and by doing a google search. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] KDE, Firebird, Thunderbird
Helgi Örn Helgason wrote: Take a look at this: http://texturizer.net/firebird/tips.html#beh_reuse Cheers, /HÖ I had already found this and tried it before I posted the message. It did not work. I have tried everything I can find on the Firebird and Thunderbird forums but so far have not found anything that works. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Did anony receive this crap too?
rd wrote: And if they are NOT be munged -- WHY WHY WHY not!!! -rdg On Mon, 2003-12-01 at 17:40, Steven Elling wrote: On Sun, 2003-11-30 at 22:09, FX wrote: I started getting it on Nov 18th. two or three a day. the MS update attached crap email and some with undeliverable Mail:User Unknown I'm getting the same ones. I'm starting to get up to around 10 a day. But the thing is most of the MS worms (W32/[EMAIL PROTECTED] in this case) that are sending out the faked MS updates and forcing the undeliverable Mail bounces are harvesting the e-mail address from the Outlook address book. So, if any of you out there are using MS Lookout... I mean Outlook... without a virus scanner, shame on you. BTW: I haven't looked at the archives, but are the e-mail addresses being munged? -- [EMAIL PROTECTED] mailing list -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Emerge Sync Timeouts
Is anyone else having problems with emerge sync timing out while receiving file list? I have tried several times this evening and it goes through the three tries and times out at each one. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Errors In Compiling Quanta
Dave Naylor wrote: I havn't solved it but I get the same error on both my Gentoo boxes. I've also checked the quanta mailing list no one has mentioned the same problem. The only other person with the same problem on google was someone using FreeBSD. There was no answer to his message about it. So I don't have a clue. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Errors In Compiling Quanta
Jason Stubbs wrote: Same here but I seem to remember something about docbook-xml version. Yes, we are talking about the same thing. I'm in the process of filing an bug report with Quanta. I'll recreate the error so I can send more of the error message to them. I even tried it via ./configure and make and it still creates the same error. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Errors In Compiling Quanta
Jason Stubbs wrote: On Friday 28 November 2003 11:44, Kathy Wills wrote: Jason Stubbs wrote: Same here but I seem to remember something about docbook-xml version. Yes, we are talking about the same thing. I'm in the process of filing an bug report with Quanta. I'll recreate the error so I can send more of the error message to them. I even tried it via ./configure and make and it still creates the same error. Bug #33013 already covers it. Bug #31534 is basically the same thing too. Jason -- [EMAIL PROTECTED] mailing list I couldn't find any bug reports on the quanta site about it. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Trouble with net-mail/evolution-1.4.5: undefined reference to ORBIT_STUB_getServant
John Ziniti wrote: gcc -march=i686 -Wall -Wunused -Wmissing-prototypes -Wmissing-declarations -o .libs/client-test client-test.o -pthread -Wl,--export-dynamic -pthread -Wl,--export-dynamic ./.libs/libcal-client.so /var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5/calendar/cal-util/.libs/libcal-util.so /var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5/libical/src/libical/.libs/libical-evolution.so /var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5/libwombat/.libs/libwombat.so /var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5/e-util/.libs/libeutil.so -L/usr/X11R6/lib -L/usr/lib /usr/lib/libsoup-2.0.so -lplc4 -lplds4 -lnspr4 /usr/lib/libgtkhtml-3.0.so /usr/lib/libgtkhtml-a11y-3.0.so /usr/lib/libgailutil.so /usr/lib/libgal-2.0.so /usr/lib/libgal-a11y-2.0.so /usr/lib/libgnomeprintui-2-2.so /usr/lib/libgnomeui-2.so /usr/lib/libjpeg.so /usr/lib/libbonoboui-2.so -lSM -lICE -lX11 /usr/lib/libgnome-2.so /usr/lib/libesd.so /usr/lib/libasound.so /usr/lib/libaudiofile.so /usr/lib/libbonobo-2.so /usr/lib/libgnomevfs-2.so /usr/lib/libgconf-2.so -lssl -lcrypto -lrt /usr/lib/libbonobo-activation.so /usr/lib/libORBitCosNaming-2.so /usr/lib/libORBit-2.so /usr/lib/libpopt.so /usr/lib/libgthread-2.0.so /usr/lib/libgnomecanvas-2.so /usr/lib/libpangoft2-1.0.so /usr/lib/libglade-2.0.so /usr/lib/libgnomeprint-2-2.so /usr/lib/libfontconfig.so /usr/lib/libexpat.so /usr/lib/libfreetype.so /usr/lib/libgtk-x11-2.0.so /usr/lib/libgdk-x11-2.0.so /usr/lib/libatk-1.0.so /usr/lib/libgdk_pixbuf-2.0.so /usr/lib/libpangoxft-1.0.so /usr/lib/libpangox-1.0.so /usr/lib/libart_lgpl_2.so /usr/lib/libxml2.so -lpthread -lz -lm /usr/lib/libpango-1.0.so /usr/lib/libgobject-2.0.so /usr/lib/libgmodule-2.0.so -ldl /usr/lib/libglib-2.0.so -Wl,--rpath -Wl,/usr/lib/evolution/1.4 /var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5/libwombat/.libs/libwombat.so: undefined reference to `ORBIT_STUB_GetServant' collect2: ld returned 1 exit status make[4]: *** [client-test] Error 1 make[4]: Leaving directory `/var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5/calendar/cal-client' make[3]: *** [all] Error 2 make[3]: Leaving directory `/var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5/calendar/cal-client' make[2]: *** [all-recursive] Error 1 make[2]: Leaving directory `/var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5/calendar' make[1]: *** [all-recursive] Error 1 make[1]: Leaving directory `/var/tmp/portage/evolution-1.4.5/work/evolution-1.4.5' make: *** [all] Error 2 !!! ERROR: net-mail/evolution-1.4.5 failed. !!! Function src_compile, Line 173, Exitcode 2 !!! make failed It looks to me like you are missing libwombat. It doesn't seem like an orbit problem. That is why orbit doesn't provide what you need. I found bug reports on this same problem here http://bugzilla.ximian.com/show_bug.cgi?id=46130 -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] cups printing problems
Harlan wrote: Hi Kathy, I have stopped and restarted the cupsd before and after every change. I have the parport compiled into the kernel, not as a separate module, but I can certainly try that. Here is a section of my /etc/log/cups/error_log file after stopping and starting cupsd: I [25/Nov/2003:10:45:01 -0600] Listening to c0a80114:631 I [25/Nov/2003:10:45:01 -0600] Loaded configuration file /etc/cups/cupsd.conf I [25/Nov/2003:10:45:01 -0600] Configured for up to 100 clients. I [25/Nov/2003:10:45:01 -0600] Allowing up to 100 client connections per host. I [25/Nov/2003:10:45:01 -0600] Full reload is required. I [25/Nov/2003:10:45:21 -0600] LoadPPDs: Read /etc/cups/ppds.dat, 2771 PPDs... I [25/Nov/2003:10:46:06 -0600] LoadPPDs: No new or changed PPDs... I [25/Nov/2003:10:46:06 -0600] Full reload complete. I [25/Nov/2003:10:48:31 -0600] Started /usr/lib/cups/cgi-bin/printers.cgi (pid =5151) E [25/Nov/2003:10:48:31 -0600] [CGI] CUPS-Get-Printers request failed - server-e rror-internal-error (500) I [25/Nov/2003:10:48:51 -0600] Started /usr/lib/cups/cgi-bin/admin.cgi (pid=51 58) As far as I know, I have all the latest foomatic scripts in place, according to the installation instructions. I'm open to suggestions. Thanks again for your help. Harlan... I'm fresh out of ideas. Check this out and see if can get some help http://www.linuxprinting.org/kpfeifle/LinuxKongress2002/Tutorial/VII.cups-help/VII.cups-help.html -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] cups printing problems
Harlan wrote: Well, I re-installed (emerged in gentoo parlance) gimp-print, foomatic (and related packages) with newer versions. I still have the same problems with the command-line foomatic-configure. When I try to use the web admin tools with cups (Add Printer), I cannot select the device. I put in the name I want, click on the Continue button, the Device dropdown is empty - no device choices. In the cups-doc.html that Kathy suggested, 5. Configure CUPS. says to basically use the Add Printer with a web browser and follow the directions, which I have done. Any ideas on how to get a device to be recognized? I do have /dev/lp0 and I can cat a text file to it. Thanks, Harlan... Did you do /etc/init.d/cupsd stop then /etc/init.d/cupsd start after doing your upgrades? Is the parport module loaded? Do you have any error messages regarding this in /var/log/cups? -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Alsa Kdemultimedia
I just switched to gentoo a couple of weeks ago after using Slackware for several months. The explanation for not including alsa support in kdemultimedia with gentoo is bug reports #2324 and #39574. Bug report #39574 does not even exist. Alsa was working just fine for me with kde and Slackware. My question is why can they Slackware developers get it working when there are all sorts of problems getting it working with Gentoo? I have a soundblaster live card and everything works just fine. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Alsa Kdemultimedia
Brett I. Holcomb wrote: Is it an issue with Gentoo or KDE. Reading the bug it appears KDE didn't want to include support in their builds. That was last year so maybe it works now? On Saturday 15 November 2003 15:44, you wrote: I just switched to gentoo a couple of weeks ago after using Slackware for several months. The explanation for not including alsa support in kdemultimedia with gentoo is bug reports #2324 and #39574. Bug report #39574 does not even exist. Alsa was working just fine for me with kde and Slackware. My question is why can they Slackware developers get it working when there are all sorts of problems getting it working with Gentoo? I have a soundblaster live card and everything works just fine. Yes, I noticed that the bug reports were old. But, still alsa gets disabled in the ebuild for kdemultimedia-3.1.4r1. Since I'm so new to gentoo, I'm not sure just how to change the ebuild to see if it will build alsa support into kdemultimedia. What I did try, resulted in a message that there were no unmasked versions of kdemultimedia to build or something to that affect. I didn't write the error message down. I just changed it back to the default ebuild and it built just fine with alsa support disabled. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Alsa Kdemultimedia
Dave Naylor wrote: URL: http://www.gentoo.org/doc/en/alsa-guide.xml This was the guide that I used to set alsa up. So I knew about this guide and have it printed out. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Alsa Kdemultimedia
Brett I. Holcomb wrote: I'm not a KDE user anymore but looking at the ebuild there is a line below alsa not supported that is commented out (the # sign). Basically this does not allow alsa support to be built in no matter what your use flags. However, the comment at the end indicates you can use oss emulation. Did you merge alsa-oss? If so and if all your modules load then you can use the oss part of alsa. The ebuild sets myaudio to enable oss at the start. From what I see it's a KDE problem. Maybe you can bug them as to why it's not fixed - or maybe it is in the betas? I followed the gentoo alsa guide when I set up alsa. I have emerged everything alsa related except for the alsamixergui and alsa player. Alsa itself is working. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Alsa Kdemultimedia
Brett I. Holcomb wrote: Why not merge the multimedia and see what happens. In the system I have that has KDE 2.2.x it allows you to let it autodetect the sound service or you can select oss and something else. It has been merged that is how I found out that it disables alsa via a post-install message. Doing further research the bug #39574 it mentions is not a bug number with bugs.gentoo.org but is a bug number with bugs.kde.org. It seems the problem is with kmidi and kmidi has been removed from the 3.2 version of kde so maybe when 3.2 becomes considered stable this will be resolved. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Problems with Floppy In Fstab
I have tried the following in my fstab file: /dev/fd0 /mnt/floppy ext3users,ro 0 0 and /dev/floppy /mnt/floppy ext3 users,ro 0 0 Of course, it has the proper spacing in the actual file. I keep getting the message that it is not a block device. Can someone please tell me what I am doing wrong? -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Problems with Floppy In Fstab
DB Wong wrote: --- Kathy Wills [EMAIL PROTECTED] wrote: I have tried the following in my fstab file: /dev/fd0 /mnt/floppy ext3users,ro 0 0 and /dev/floppy /mnt/floppy ext3 users,ro 0 0 Of course, it has the proper spacing in the actual file. I keep getting the message that it is not a block device. Can someone please tell me what I am doing wrong? The first case looks okay to me but the block device error will come from the second case (/dev/floppy) because that's a directory (try /dev/floppy/0) --DB I'll give that a try. Hope that stops the errors. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Problems with Floppy In Fstab
Norbert Kamenicky wrote: Kathy Wills wrote: I have tried the following in my fstab file: /dev/fd0 /mnt/floppy ext3users,ro 0 0 and /dev/floppy /mnt/floppy ext3 users,ro 0 0 Of course, it has the proper spacing in the actual file. I keep getting the message that it is not a block device. Can someone please tell me what I am doing wrong? Hi Kathy, u do not like read manuals, don't u ? In both of lines u have mistakes in flag user :-( /dev/floppy is not dev special, but directory, therefore the error :-) really u like to use ext3 FS on floppy ? (M$ floppy uses vfat) let's try this: /dev/fd0 /mnt/floppy auto user,noauto 0 0 That is one of the ways I tried. I was still getting the error message about it. Yes, I read the manuals. Everything I had tried came up with the error message. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Problems with Floppy In Fstab
Jason Stubbs wrote: On Thursday 13 November 2003 09:18, Norbert Kamenicky wrote: u do not like read manuals, don't u ? In both of lines u have mistakes in flag user :-( That's pretty rude - especially since you are wrong. Both the user option and the users option exists. Both allow any user to mount the device. The difference is that users will allow any user to unmount the device whereas user will only allow the mounting user to unmount it. Jason Thanks, Jason, I had used users because this was exactly what I wanted. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Problems with Floppy In Fstab
Ernie Schroder wrote: On Wednesday 12 November 2003 08:38 pm, Kathy Wills wrote: Norbert Kamenicky wrote: Kathy Wills wrote: I have tried the following in my fstab file: /dev/fd0 /mnt/floppy ext3users,ro 0 0 and /dev/floppy /mnt/floppy ext3 users,ro 0 0 Of course, it has the proper spacing in the actual file. I keep getting the message that it is not a block device. Can someone please tell me what I am doing wrong? Hi Kathy, u do not like read manuals, don't u ? In both of lines u have mistakes in flag user :-( /dev/floppy is not dev special, but directory, therefore the error :-) really u like to use ext3 FS on floppy ? (M$ floppy uses vfat) let's try this: /dev/fd0 /mnt/floppy auto user,noauto 0 0 That is one of the ways I tried. I was still getting the error message about it. Yes, I read the manuals. Everything I had tried came up with the error message. Kathy, Try it like this: /dev/fd0 /mnt/floppy vfat noauto,users,auto,rw 0 0 This is the combination that finally worked. /dev/floppy/0 /mnt/floppyext3,vfat users,noauto,rw 0 0 -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
[gentoo-user] Help With Compile Error Kdemultimedia
While compiling kdemultimedia during emerge world, I get the following
error:
/usr/include/asm/byteorder.h:38: syntax error before '(' token
/usr/include/asm/byteorder h:42: '_u64' is used as a type, but is not
defined as a type.
/usr/include/asm/byteorder h;43: syntax error before '}' token
/usr/include/asm/byteorder h:44: syntax error before '.' token
/usr/include/asm/byteorder h:50: syntax error before '.' token
/usr/include/asm/byteorder h:51: syntax error before '.' token
/usr/include/asm/byteorder h:52: syntax error before '.' token
cdconfigimp.cpp:82: syntax error before '}' token
make[3]: *** [cdconfigimp.o] Error 1
make[3]: Leaving directory
'/var/tmp/portage/kdemultimedia-3.1.4-r1/work/kdemultimedia-3.1.4/kaudiocreator'
make[2]: *** [all-recursive] Error 1
make[2]: Leaving directory
'/var/tmp/portage/kdemultimedia-3.1.4-r1/work/kdemultimedia-3.1.4/kaudiocreator'
make[1]: *** [all-recursive] Error 1
make[1]: Leaving directory
'/var/tmp/portage/kdemultimedia-3.1.4-r1/work/kdemultimedia-3.1.4'
make: *** [all} Error 2
!!! ERROR: kde-base/kdemultimedia-3.1.4-r1 failed.
!!! Function kde_src_compile, Line 137, Exitcode 2
!!! died running emake, kde_src_compile make
How do I solve this so I can resume emerge world?
Kathy
--
[EMAIL PROTECTED] mailing list
Re: [gentoo-user] Re: Help With Compile Error Kdemultimedia
Ermanno Poggi wrote: make: *** [all} Error 2 !!! ERROR: kde-base/kdemultimedia-3.1.4-r1 failed. !!! Function kde_src_compile, Line 137, Exitcode 2 !!! died running emake, kde_src_compile make How do I solve this so I can resume emerge world? Kathy '/var/tmp/portage/kdemultimedia-3.1.4-r1/work/kdemultimedia-3.1.4' I've the same problem! gcc 3.3.2-r2 glibc 2.3.2-r8 kernel 2.6.0-test9-mm1 have you solved? g No I haven't solved it yet. I just came home from work. The only difference between what you have and what I have is glibc-2.3.2-r1 and linux kernel 2.4.22 Kathy -- [EMAIL PROTECTED] mailing list
[gentoo-user] Question About Iptables Script and Sound
I have searched the forums and connot find an answer to either of my questions. I will be changing from Slackware 9.1 to Gentoo 1.4 starting later tonight. My computer acts as the firewall/gateway for my small home network. With slackware I use a script file /etc/rc.d/rc.iptables to povide this funcionality. It is based on a conf file in /etc. My first question is do I place these two files in the same location in Gentoo as in Slackware in order to provide the same functions? Next, I have a Soundblaster Live sound card. I plan to use alsa for sound. Do I need to emerge emu10k1 along with the alsa? I will be doing a stage 3 install to start with as my husband would be hard to live with if he has to go for more than a day or so without internet. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] How to backout devfs?
gabor wrote: | Because devfs is been removed from future kernels? | and why was it removed? is there a better thing than devfsd? The kernel developers are making plans to change from devfs to udev. Udev is still in the development process. It will work much the same way as devfs. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
Re: [gentoo-user] Alsa emerge error
Michael W. Holdeman wrote: I just upgraded to 2.4.23_pre7-gss kernel, and all is fine except again I have no sound. My Intel 865 MB with integrated sound I had to use alsa last time. Now when I emerge alsa I get teh following: *** gcc -D__KERNEL__ -DMODULE=1 -I/var/tmp/portage/alsa-driver-0.9.2/work/alsa-driver-0.9.2/include -I/usr/src/linux/include -O2 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -DALSA_BUILD -DEXPORT_SYMTAB -c hwdep.c gcc -D__KERNEL__ -DMODULE=1 -I/var/tmp/portage/alsa-driver-0.9.2/work/alsa-driver-0.9.2/include -I/usr/src/linux/include -O2 -DLINUX -Wall -Wstrict-prototypes -fomit-frame-pointer -Wno-trigraphs -O2 -fno-strict-aliasing -fno-common -pipe -DALSA_BUILD -DEXPORT_SYMTAB -c memalloc.c In file included from ../alsa-kernel/core/memalloc.c:27, from memalloc.c:28: /usr/src/linux/include/linux/proc_fs.h:213: redefinition of `PDE' /var/tmp/portage/alsa-driver-0.9.2/work/alsa-driver-0.9.2/include/adriver.h:111: `PDE' previously defined here make[1]: *** [memalloc.o] Error 1 make[1]: Leaving directory `/var/tmp/portage/alsa-driver-0.9.2/work/alsa-driver-0.9.2/acore' make: *** [compile] Error 1 !!! ERROR: media-sound/alsa-driver-0.9.2 failed. Is this the newest version of alsa that is available for Gentoo? I don't have Gentoo installed on my system yet. I'm planning to make the switch from Slackware to Gentoo. I'm at the stage right now of learning just what all is involved with making Gentoo work and what I will need to do to get it installed on my system. I just finished getting alsa working again on my system via the newest drivers and files from the alsa website. The latest version is 9.8. I'm using the vanilla kernel 2.4.22 from www.kernel.org. -- Kathy Wills + + Genealogy Web Site: http://www.kathywillsfamily.com + + + + Summit Group Web Site: http://www.tsginfo.com/index.php?rc=VW4374 + + -- [EMAIL PROTECTED] mailing list
