Re: [LegacyUG] Reports - Family Picture Tree - Ver 6 Deluxe

[Bruce Jones]

I also get a missing/blank picture in the 4th generation (6th position).

On Mon, Jul 28, 2008 at 6:22 PM, Trippsibs5 <[EMAIL PROTECTED]> wrote:

>  I noticed a problem in the Family Picture Tree Report (Books/Other) in
> that the tree looks fine for 3 or fewer generations, but when 4 generations
> are selected, the tree comes up with some missing and/or some blank boxes in
> the 4th generation.
> I see the same results in the Sample file. I am assuming that parts of the
> Pedigree View tab would match a Family Picture Tree Report.
> In the Sample File, I chose David Clark Brown, RIN 92 as my Gen #1. All is
> as expected until his Gen #4 that has no boxes above John Huffman & Molly
> Smith - this is fine as there are no ancestors in the Sample file for them.
> His Gen #4 has 4 blank boxes (for 2 sets of parents) above Nathan Brown
> (RIN 54) and Molly Clark (RIN 53). In the Pedigree View, both Nathan and
> Molly have parents listed. I would expect those parents to be the Gen #4
> in the Family Picture Tree in Legacy Deluxe, Ver 6.0.0.190 (latest). I
> have never used this report before.
> If someone can reproduce this, I'll report as a problem. If I'm missing
> something here, please advise.
> Regards, Jane Tripp
>
>
>
>
>
> Legacy User Group guidelines:
>http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
>




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] a problem with a source - let's start again please

[Rachel Alliston]

Valerie wrote:-
:
: I would like to delete this source but:
:
: a. I do not know who else has the same source
:
: b. As I can not find it I can not delete it
:
: Can I have some new ideas please ?
:
: Regards from Valerie in sunny Sydney.
: Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
: Wexford
: Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
:
: Hi Valerie

Have you tried going to Reports > All Reports Books & Others and then 
clicking on Source Citation Listing.
You can bring the details up on the Screen and it shows who has what source 
etc etc.  Up to you what you include in Options etc.   You may find it 
there...
Other than that I can't think of any other suggestions.

Good luck
Rachel 





Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

[LegacyUG] a problem with a source - let's start again please

[Valerie Garton]

Using Version 6 I have a source which appears in the source list at the end
of the Family Group Record report which says:

A number eg 3(National Archives of Ireland) - exactly

So it looks like this:

3.  (National Archives of Ireland)

And this is not in my source list, nor are there any blanks, and so I am not
able to find out who else has the same source.

I would like to delete this source but:

a. I do not know who else has the same source 

b. As I can not find it I can not delete it

Can I have some new ideas please ?

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Valerie
Garton
Sent: Tuesday, 29 July 2008 11:41 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: RE: [LegacyUG] a problem with a source ?

BUT I can not see how to select/put " Source Master Source " in the where
box ?

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jessica
Morgan
Sent: Tuesday, 29 July 2008 10:59 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

Valerie,

Have you tried a search using:
Detailed Search
Whom: Individual
Where: Source Master Source
How: Contains
What: National Archives of Ireland


On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
<[EMAIL PROTECTED]> wrote:
>
> Yes I agree that that is probably the situation BUT there are no blank
> entries
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
> Richardson
> Sent: Monday, 28 July 2008 2:17 AM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] a problem with a source ?
>
> Valerie, this looks like you have no title or author for this source,
rather
>
> the (National Archives of Ireland) is the publication information. In that
> case, the "source" will be a blank entry at the beginning of your Master
> Sources list. Take a look there and see if you don't find something like
> what you're looking for.
>
> Elizabeth
> researching the descendants of William and Sarah (Patterson) Thompson
>
> - Original Message -
> From: "Valerie Garton" <[EMAIL PROTECTED]>
> To: 
> Sent: Sunday, July 27, 2008 5:44 AM
> Subject: [LegacyUG] a problem with a source ?
>
>
> >I have a source which is on a family group record report which says:
> >
> > 3. (National Archives of Ireland)
> >
> > And this is not in my source list and so I am not able to find out who
> > else
> > has the same source.
> >
> > I would like to delete this source but;
> >
> > a. I do not know who else has the same source
> > b. As I can not find it I can not delete it
> >
> > I hope this makes sense to some one ?
> >
> > It looks to me as though it has been put some where as the Repository ?
> >
> > Regards from Valerie in sunny Sydney.
> > Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow
&
> > Wexford
> > Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON



Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] a problem with a source ? - Detailed Search

[Valerie Garton]

Thank you for this Jane. No wonder I can not find it.

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Trippsibs5
Sent: Tuesday, 29 July 2008 2:31 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ? - Detailed Search

A Detailed Search of Source Master Source is not available in Ver 6. That 
might be the reason you can't find it.
Regards, Jane Tripp

On Behalf Of Jessica Morgan
Sent: Tuesday, 29 July 2008 10:59 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

- Can't find Master Source in where drop down window

Valerie,

 Have you tried a search using:
 Detailed Search
 Whom: Individual
 Where: Source Master Source
 How: Contains
 What: National Archives of Ireland 




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] a problem with a source ? - Detailed Search

[Trippsibs5]

A Detailed Search of Source Master Source is not available in Ver 6. That 
might be the reason you can't find it.
Regards, Jane Tripp

On Behalf Of Jessica Morgan
Sent: Tuesday, 29 July 2008 10:59 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

- Can't find Master Source in where drop down window

Valerie,

 Have you tried a search using:
 Detailed Search
 Whom: Individual
 Where: Source Master Source
 How: Contains
 What: National Archives of Ireland 




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] a problem with a source ?

[Valerie Garton]

I am sorry Elizabeth that is what I meant. Another seniors moment.

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
Richardson
Sent: Tuesday, 29 July 2008 12:28 PM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

No, the drop down list in the Where to Look field.

Elizabeth
researching the descendants of William and Sarah (Patterson)  Thompson

- Original Message - 
From: "Valerie Garton" <[EMAIL PROTECTED]>
To: 
Sent: Monday, July 28, 2008 6:10 PM
Subject: RE: [LegacyUG] a problem with a source ?


> Ok I will have another look.
>
> You do mean in the drop down list of whom in the detailed search page ?
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
> Richardson
> Sent: Tuesday, 29 July 2008 11:54 AM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] a problem with a source ?
>
> It's 2nd from the bottom of the list.
>
> Elizabeth
> researching the descendants of William and Sarah (Patterson) Thompson
>
> - Original Message - 
> From: "Valerie Garton" <[EMAIL PROTECTED]>
> To: 
> Sent: Monday, July 28, 2008 5:40 PM
> Subject: RE: [LegacyUG] a problem with a source ?
>
>
>> BUT I can not see how to select/put " Source Master Source " in the where
>> box ?
>>
>> Regards from Valerie in sunny Sydney.
>> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow 
>> &
>> Wexford
>> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>>
>> -Original Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On Behalf Of Jessica
>> Morgan
>> Sent: Tuesday, 29 July 2008 10:59 AM
>> To: LegacyUserGroup@legacyfamilytree.com
>> Subject: Re: [LegacyUG] a problem with a source ?
>>
>> Valerie,
>>
>> Have you tried a search using:
>> Detailed Search
>> Whom: Individual
>> Where: Source Master Source
>> How: Contains
>> What: National Archives of Ireland
>>
>>
>> On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
>> <[EMAIL PROTECTED]> wrote:
>>>
>>> Yes I agree that that is probably the situation BUT there are no blank
>>> entries
>>>
>>> Regards from Valerie in sunny Sydney.
>>> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow
>>> &
>>> Wexford
>>> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>>>
>>> -Original Message-
>>> From: [EMAIL PROTECTED]
>>> [mailto:[EMAIL PROTECTED] On Behalf Of
>>> Elizabeth
>>> Richardson
>>> Sent: Monday, 28 July 2008 2:17 AM
>>> To: LegacyUserGroup@legacyfamilytree.com
>>> Subject: Re: [LegacyUG] a problem with a source ?
>>>
>>> Valerie, this looks like you have no title or author for this source,
>> rather
>>>
>>> the (National Archives of Ireland) is the publication information. In
>>> that
>>> case, the "source" will be a blank entry at the beginning of your Master
>>> Sources list. Take a look there and see if you don't find something like
>>> what you're looking for.
>>>
>>> Elizabeth
>>> researching the descendants of William and Sarah (Patterson) Thompson
>>>
>>> - Original Message -
>>> From: "Valerie Garton" <[EMAIL PROTECTED]>
>>> To: 
>>> Sent: Sunday, July 27, 2008 5:44 AM
>>> Subject: [LegacyUG] a problem with a source ?
>>>
>>>
>>> >I have a source which is on a family group record report which says:
>>> >
>>> > 3. (National Archives of Ireland)
>>> >
>>> > And this is not in my source list and so I am not able to find out who
>>> > else
>>> > has the same source.
>>> >
>>> > I would like to delete this source but;
>>> >
>>> > a. I do not know who else has the same source
>>> > b. As I can not find it I can not delete it
>>> >
>>> > I hope this makes sense to some one ?
>>> >
>>> > It looks to me as though it has been put some where as the Repository 
>>> > ?
>>> >
>>> > Regards from Valerie in sunny Sydney.
>>> > Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin,
>>> > Wicklow
>> &
>>> > Wexford
>>> > Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>> 




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: 

Re: [LegacyUG] IE 7 and mapping

[Elsie Saar]

Thank you, jdm and Gary. I will try to load it and see what happens.
Elsie

- Original Message - 
From: "John Magyari" <[EMAIL PROTECTED]>

To: 
Sent: Monday, July 28, 2008 2:03 PM
Subject: Re: [LegacyUG] IE 7 and mapping


On my Pentium III w/512Meg memory and Pentium 4 2.53GHz w/2Gig 
memory,
Using either IE6 or IE7 seems to give same performance to me.  I 
don't see a slow down.


IE7 and mapping is a cool feature on Rev 7.

Why don't you load IE7,  and try it,  you can remove it if it 
affects you machine and go back to the old IE6 if you have to. 
You'll probably have no problems with IE7.


jdm






Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] a problem with a source ?

[Elizabeth Richardson]

No, the drop down list in the Where to Look field.

Elizabeth
researching the descendants of William and Sarah (Patterson)  Thompson

- Original Message - 
From: "Valerie Garton" <[EMAIL PROTECTED]>

To: 
Sent: Monday, July 28, 2008 6:10 PM
Subject: RE: [LegacyUG] a problem with a source ?



Ok I will have another look.

You do mean in the drop down list of whom in the detailed search page ?

Regards from Valerie in sunny Sydney.
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
Richardson
Sent: Tuesday, 29 July 2008 11:54 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

It's 2nd from the bottom of the list.

Elizabeth
researching the descendants of William and Sarah (Patterson) Thompson

- Original Message - 
From: "Valerie Garton" <[EMAIL PROTECTED]>

To: 
Sent: Monday, July 28, 2008 5:40 PM
Subject: RE: [LegacyUG] a problem with a source ?



BUT I can not see how to select/put " Source Master Source " in the where
box ?

Regards from Valerie in sunny Sydney.
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow 
&

Wexford
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jessica
Morgan
Sent: Tuesday, 29 July 2008 10:59 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

Valerie,

Have you tried a search using:
Detailed Search
Whom: Individual
Where: Source Master Source
How: Contains
What: National Archives of Ireland


On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
<[EMAIL PROTECTED]> wrote:


Yes I agree that that is probably the situation BUT there are no blank
entries

Regards from Valerie in sunny Sydney.
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow
&
Wexford
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Elizabeth
Richardson
Sent: Monday, 28 July 2008 2:17 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

Valerie, this looks like you have no title or author for this source,

rather


the (National Archives of Ireland) is the publication information. In
that
case, the "source" will be a blank entry at the beginning of your Master
Sources list. Take a look there and see if you don't find something like
what you're looking for.

Elizabeth
researching the descendants of William and Sarah (Patterson) Thompson

- Original Message -
From: "Valerie Garton" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, July 27, 2008 5:44 AM
Subject: [LegacyUG] a problem with a source ?


>I have a source which is on a family group record report which says:
>
> 3. (National Archives of Ireland)
>
> And this is not in my source list and so I am not able to find out who
> else
> has the same source.
>
> I would like to delete this source but;
>
> a. I do not know who else has the same source
> b. As I can not find it I can not delete it
>
> I hope this makes sense to some one ?
>
> It looks to me as though it has been put some where as the Repository 
> ?

>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin,
> Wicklow

&

> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON







Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] a problem with a source ?

[Valerie Garton]

I have had a look and the last 14 entries in that list all refer to address
- 

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
Richardson
Sent: Tuesday, 29 July 2008 11:54 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

It's 2nd from the bottom of the list.

Elizabeth
researching the descendants of William and Sarah (Patterson) Thompson

- Original Message - 
From: "Valerie Garton" <[EMAIL PROTECTED]>
To: 
Sent: Monday, July 28, 2008 5:40 PM
Subject: RE: [LegacyUG] a problem with a source ?


> BUT I can not see how to select/put " Source Master Source " in the where
> box ?
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jessica
> Morgan
> Sent: Tuesday, 29 July 2008 10:59 AM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] a problem with a source ?
>
> Valerie,
>
> Have you tried a search using:
> Detailed Search
> Whom: Individual
> Where: Source Master Source
> How: Contains
> What: National Archives of Ireland
>
>
> On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
> <[EMAIL PROTECTED]> wrote:
>>
>> Yes I agree that that is probably the situation BUT there are no blank
>> entries
>>
>> Regards from Valerie in sunny Sydney.
>> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow 
>> &
>> Wexford
>> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>>
>> -Original Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On Behalf Of 
>> Elizabeth
>> Richardson
>> Sent: Monday, 28 July 2008 2:17 AM
>> To: LegacyUserGroup@legacyfamilytree.com
>> Subject: Re: [LegacyUG] a problem with a source ?
>>
>> Valerie, this looks like you have no title or author for this source,
> rather
>>
>> the (National Archives of Ireland) is the publication information. In 
>> that
>> case, the "source" will be a blank entry at the beginning of your Master
>> Sources list. Take a look there and see if you don't find something like
>> what you're looking for.
>>
>> Elizabeth
>> researching the descendants of William and Sarah (Patterson) Thompson
>>
>> - Original Message -
>> From: "Valerie Garton" <[EMAIL PROTECTED]>
>> To: 
>> Sent: Sunday, July 27, 2008 5:44 AM
>> Subject: [LegacyUG] a problem with a source ?
>>
>>
>> >I have a source which is on a family group record report which says:
>> >
>> > 3. (National Archives of Ireland)
>> >
>> > And this is not in my source list and so I am not able to find out who
>> > else
>> > has the same source.
>> >
>> > I would like to delete this source but;
>> >
>> > a. I do not know who else has the same source
>> > b. As I can not find it I can not delete it
>> >
>> > I hope this makes sense to some one ?
>> >
>> > It looks to me as though it has been put some where as the Repository ?
>> >
>> > Regards from Valerie in sunny Sydney.
>> > Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, 
>> > Wicklow
> &
>> > Wexford
>> > Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
>
>
> Legacy User Group guidelines:
>   http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
>
>
>
>
>
> Legacy User Group guidelines:
>   http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
> 




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] a problem with a source ?

[Valerie Garton]

Ok I will have another look.

You do mean in the drop down list of whom in the detailed search page ?

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
Richardson
Sent: Tuesday, 29 July 2008 11:54 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

It's 2nd from the bottom of the list.

Elizabeth
researching the descendants of William and Sarah (Patterson) Thompson

- Original Message - 
From: "Valerie Garton" <[EMAIL PROTECTED]>
To: 
Sent: Monday, July 28, 2008 5:40 PM
Subject: RE: [LegacyUG] a problem with a source ?


> BUT I can not see how to select/put " Source Master Source " in the where
> box ?
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Jessica
> Morgan
> Sent: Tuesday, 29 July 2008 10:59 AM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] a problem with a source ?
>
> Valerie,
>
> Have you tried a search using:
> Detailed Search
> Whom: Individual
> Where: Source Master Source
> How: Contains
> What: National Archives of Ireland
>
>
> On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
> <[EMAIL PROTECTED]> wrote:
>>
>> Yes I agree that that is probably the situation BUT there are no blank
>> entries
>>
>> Regards from Valerie in sunny Sydney.
>> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow 
>> &
>> Wexford
>> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>>
>> -Original Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On Behalf Of 
>> Elizabeth
>> Richardson
>> Sent: Monday, 28 July 2008 2:17 AM
>> To: LegacyUserGroup@legacyfamilytree.com
>> Subject: Re: [LegacyUG] a problem with a source ?
>>
>> Valerie, this looks like you have no title or author for this source,
> rather
>>
>> the (National Archives of Ireland) is the publication information. In 
>> that
>> case, the "source" will be a blank entry at the beginning of your Master
>> Sources list. Take a look there and see if you don't find something like
>> what you're looking for.
>>
>> Elizabeth
>> researching the descendants of William and Sarah (Patterson) Thompson
>>
>> - Original Message -
>> From: "Valerie Garton" <[EMAIL PROTECTED]>
>> To: 
>> Sent: Sunday, July 27, 2008 5:44 AM
>> Subject: [LegacyUG] a problem with a source ?
>>
>>
>> >I have a source which is on a family group record report which says:
>> >
>> > 3. (National Archives of Ireland)
>> >
>> > And this is not in my source list and so I am not able to find out who
>> > else
>> > has the same source.
>> >
>> > I would like to delete this source but;
>> >
>> > a. I do not know who else has the same source
>> > b. As I can not find it I can not delete it
>> >
>> > I hope this makes sense to some one ?
>> >
>> > It looks to me as though it has been put some where as the Repository ?
>> >
>> > Regards from Valerie in sunny Sydney.
>> > Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, 
>> > Wicklow
> &
>> > Wexford
>> > Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
>
>
> Legacy User Group guidelines:
>   http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
>
>
>
>
>
> Legacy User Group guidelines:
>   http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
> 




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Where to enter a street address?

[RICHARD SCHULTHIES]

Today I was doing that exactly. 
There are 2 methods to use, if you are going to change
EVERY instance of the locaton (example Buckingham
Palace), you can do it in the Master Location List but
if you will be adding a new place/address (I have
added 18 different street addresses in Chicago so far)
you want to do it in the Individual Information
screen, Event screen or other screen (?). Then you
must go in and change the location for the 'other'
people using that address. It does NOT ask do you want
to change or make new in the MLL, but allows in IIS.
Be careful.
Rich in LA CA

--- Art Seddon <[EMAIL PROTECTED]> wrote:

> One has to wonder - How do you map items in the
> address list?
> If the address is in the "Master" location list it
> is possible to map right 
> to the house, farm, cemetary or whatever.
> 
> Art Seddon
> 
> 
> - Original Message - 
> From: TH
> To: LegacyUserGroup@legacyfamilytree.com
> Sent: Monday, July 28, 2008 4:21 PM
> Subject: Re: [LegacyUG] Where to enter a street
> address?
> 
> 
> Phil,
> 
> They're obviously obsessed with the mapping feature
> and too easily led by 
> the "experts" who think the program's user manual
> and the instructions if 
> provides are superfluous.
> 
> Tom Herson
> Ithaca, NY
> 
> 
> On Mon, Jul 28, 2008 at 5:45 PM, Phil Hawkins
> <[EMAIL PROTECTED]> wrote:
> 
> The MASTER LOCATION LIST is just that, a MASTER
> list. In the same way that 
> the MASTER SOURCE LIST is a MASTER list.
> Legacy designed it so that it lists town, county,
> state, country. And 
> obviously, originally for USA locations.  (Those of
> us with ancestors and 
> descendants from other parts of the world have to
> make a modification to the 
> way the data is entered)
> 
> It is designed to give an overview of the area our
> ancestors lived
> 
> The EVENT address list is for the detail in the same
> way the SOURCE detail 
> is designed.
> 
> Street numbers and addresses should be put in this
> list.
> You wouldn't enter the address, date and all other
> details in the birth date 
> column, but use the appropriate place that the
> program has supplied. Why try 
> to add other details in the wrong place?
> 
> As has been reported many times – this causes
> problems
> 
> 
> Regards
> Phil
> Legacy User Group guidelines:
>http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>   
>
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support:
> http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe:
> http://www.LegacyFamilyTree.com/LegacyLists.asp
> 
> 
> Legacy User Group guidelines:
>http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>   
>
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support:
> http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe:
> http://www.LegacyFamilyTree.com/LegacyLists.asp
> No virus found in this incoming message.
> Checked by AVG - http://www.avg.com
> Version: 8.0.138 / Virus Database: 270.5.6/1577 -
> Release Date: 7/28/2008 
> 6:55 AM 
> 
> 
> No virus found in this outgoing message.
> Checked by AVG - http://www.avg.com 
> Version: 8.0.138 / Virus Database: 270.5.6/1577 -
> Release Date: 7/28/2008 6:55 AM
> 
> 
> 
> 
> Legacy User Group guidelines: 
>http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages: 
>   
>
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support:
> http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe:
> http://www.LegacyFamilyTree.com/LegacyLists.asp
> 
> 
> 
> 





Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] a problem with a source ?

[Elizabeth Richardson]

It's 2nd from the bottom of the list.

Elizabeth
researching the descendants of William and Sarah (Patterson) Thompson

- Original Message - 
From: "Valerie Garton" <[EMAIL PROTECTED]>

To: 
Sent: Monday, July 28, 2008 5:40 PM
Subject: RE: [LegacyUG] a problem with a source ?



BUT I can not see how to select/put " Source Master Source " in the where
box ?

Regards from Valerie in sunny Sydney.
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jessica
Morgan
Sent: Tuesday, 29 July 2008 10:59 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

Valerie,

Have you tried a search using:
Detailed Search
Whom: Individual
Where: Source Master Source
How: Contains
What: National Archives of Ireland


On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
<[EMAIL PROTECTED]> wrote:


Yes I agree that that is probably the situation BUT there are no blank
entries

Regards from Valerie in sunny Sydney.
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow 
&

Wexford
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of 
Elizabeth

Richardson
Sent: Monday, 28 July 2008 2:17 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

Valerie, this looks like you have no title or author for this source,

rather


the (National Archives of Ireland) is the publication information. In 
that

case, the "source" will be a blank entry at the beginning of your Master
Sources list. Take a look there and see if you don't find something like
what you're looking for.

Elizabeth
researching the descendants of William and Sarah (Patterson) Thompson

- Original Message -
From: "Valerie Garton" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, July 27, 2008 5:44 AM
Subject: [LegacyUG] a problem with a source ?


>I have a source which is on a family group record report which says:
>
> 3. (National Archives of Ireland)
>
> And this is not in my source list and so I am not able to find out who
> else
> has the same source.
>
> I would like to delete this source but;
>
> a. I do not know who else has the same source
> b. As I can not find it I can not delete it
>
> I hope this makes sense to some one ?
>
> It looks to me as though it has been put some where as the Repository ?
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, 
> Wicklow

&

> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON




Legacy User Group guidelines:
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines:
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp








Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] a problem with a source ?

[Valerie Garton]

BUT I can not see how to select/put " Source Master Source " in the where
box ?

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jessica
Morgan
Sent: Tuesday, 29 July 2008 10:59 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

Valerie,

Have you tried a search using:
Detailed Search
Whom: Individual
Where: Source Master Source
How: Contains
What: National Archives of Ireland


On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
<[EMAIL PROTECTED]> wrote:
>
> Yes I agree that that is probably the situation BUT there are no blank
> entries
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
> Richardson
> Sent: Monday, 28 July 2008 2:17 AM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] a problem with a source ?
>
> Valerie, this looks like you have no title or author for this source,
rather
>
> the (National Archives of Ireland) is the publication information. In that
> case, the "source" will be a blank entry at the beginning of your Master
> Sources list. Take a look there and see if you don't find something like
> what you're looking for.
>
> Elizabeth
> researching the descendants of William and Sarah (Patterson) Thompson
>
> - Original Message -
> From: "Valerie Garton" <[EMAIL PROTECTED]>
> To: 
> Sent: Sunday, July 27, 2008 5:44 AM
> Subject: [LegacyUG] a problem with a source ?
>
>
> >I have a source which is on a family group record report which says:
> >
> > 3. (National Archives of Ireland)
> >
> > And this is not in my source list and so I am not able to find out who
> > else
> > has the same source.
> >
> > I would like to delete this source but;
> >
> > a. I do not know who else has the same source
> > b. As I can not find it I can not delete it
> >
> > I hope this makes sense to some one ?
> >
> > It looks to me as though it has been put some where as the Repository ?
> >
> > Regards from Valerie in sunny Sydney.
> > Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow
&
> > Wexford
> > Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON



Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] a problem with a source ?

[Valerie Garton]

No Jessica - what a brilliant idea. 

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Jessica
Morgan
Sent: Tuesday, 29 July 2008 10:59 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

Valerie,

Have you tried a search using:
Detailed Search
Whom: Individual
Where: Source Master Source
How: Contains
What: National Archives of Ireland


On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
<[EMAIL PROTECTED]> wrote:
>
> Yes I agree that that is probably the situation BUT there are no blank
> entries
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
> Richardson
> Sent: Monday, 28 July 2008 2:17 AM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] a problem with a source ?
>
> Valerie, this looks like you have no title or author for this source,
rather
>
> the (National Archives of Ireland) is the publication information. In that
> case, the "source" will be a blank entry at the beginning of your Master
> Sources list. Take a look there and see if you don't find something like
> what you're looking for.
>
> Elizabeth
> researching the descendants of William and Sarah (Patterson) Thompson
>
> - Original Message -
> From: "Valerie Garton" <[EMAIL PROTECTED]>
> To: 
> Sent: Sunday, July 27, 2008 5:44 AM
> Subject: [LegacyUG] a problem with a source ?
>
>
> >I have a source which is on a family group record report which says:
> >
> > 3. (National Archives of Ireland)
> >
> > And this is not in my source list and so I am not able to find out who
> > else
> > has the same source.
> >
> > I would like to delete this source but;
> >
> > a. I do not know who else has the same source
> > b. As I can not find it I can not delete it
> >
> > I hope this makes sense to some one ?
> >
> > It looks to me as though it has been put some where as the Repository ?
> >
> > Regards from Valerie in sunny Sydney.
> > Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow
&
> > Wexford
> > Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON



Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

[LegacyUG] Reports - Family Picture Tree - Ver 6 Deluxe

[Trippsibs5]

I noticed a problem in the Family Picture Tree Report (Books/Other) in that the 
tree looks fine for 3 or fewer generations, but when 4 generations are 
selected, the tree comes up with some missing and/or some blank boxes in the 
4th generation.
I see the same results in the Sample file. I am assuming that parts of the 
Pedigree View tab would match a Family Picture Tree Report.
In the Sample File, I chose David Clark Brown, RIN 92 as my Gen #1. All is as 
expected until his Gen #4 that has no boxes above John Huffman & Molly Smith - 
this is fine as there are no ancestors in the Sample file for them.
His Gen #4 has 4 blank boxes (for 2 sets of parents) above Nathan Brown (RIN 
54) and Molly Clark (RIN 53). In the Pedigree View, both Nathan and Molly have 
parents listed. I would expect those parents to be the Gen #4 in the Family 
Picture Tree in Legacy Deluxe, Ver 6.0.0.190 (latest). I have never used this 
report before. 
If someone can reproduce this, I'll report as a problem. If I'm missing 
something here, please advise.
Regards, Jane Tripp








Legacy User Group guidelines: 

   http://www.LegacyFamilyTree.com/Etiquette.asp

Archived messages: 

   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp

To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] ... Time machine ?

[Brian Smith]

Jane Sarles, 

Unless you have a time machine you aren't telling us about, 
please fix the date on your computer.  If you do have one, 
please keep us posted on what the stock market will be doing.  

Brian in San Jose, CA 

--- On Tue, 8/26/08, Jane Sarles <[EMAIL PROTECTED]> wrote:

> From: Jane Sarles <[EMAIL PROTECTED]>
> Subject: Re: [LegacyUG] Where to enter a street address?
> To: LegacyUserGroup@legacyfamilytree.com
> Date: Tuesday, August 26, 2008, 9:59 AM
< ... clipped ... > 
> Jane Sarles



  



Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] a problem with a source ?

[Jessica Morgan]

Valerie,

Have you tried a search using:
Detailed Search
Whom: Individual
Where: Source Master Source
How: Contains
What: National Archives of Ireland


On Mon, Jul 28, 2008 at 5:30 PM, Valerie Garton
<[EMAIL PROTECTED]> wrote:
>
> Yes I agree that that is probably the situation BUT there are no blank
> entries
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
> -Original Message-
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
> Richardson
> Sent: Monday, 28 July 2008 2:17 AM
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] a problem with a source ?
>
> Valerie, this looks like you have no title or author for this source, rather
>
> the (National Archives of Ireland) is the publication information. In that
> case, the "source" will be a blank entry at the beginning of your Master
> Sources list. Take a look there and see if you don't find something like
> what you're looking for.
>
> Elizabeth
> researching the descendants of William and Sarah (Patterson) Thompson
>
> - Original Message -
> From: "Valerie Garton" <[EMAIL PROTECTED]>
> To: 
> Sent: Sunday, July 27, 2008 5:44 AM
> Subject: [LegacyUG] a problem with a source ?
>
>
> >I have a source which is on a family group record report which says:
> >
> > 3. (National Archives of Ireland)
> >
> > And this is not in my source list and so I am not able to find out who
> > else
> > has the same source.
> >
> > I would like to delete this source but;
> >
> > a. I do not know who else has the same source
> > b. As I can not find it I can not delete it
> >
> > I hope this makes sense to some one ?
> >
> > It looks to me as though it has been put some where as the Repository ?
> >
> > Regards from Valerie in sunny Sydney.
> > Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> > Wexford
> > Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON



Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Use of the marriage information

[Alfred F. Schwilk]

Hi Everyone:

I think that Legacy is a great GENEALOGY progam and I couldn't live 
without it to control vital records for my research.
The Individual's Information window and its event/fact are critical for 
understanding  the information collected and it points to areas of 
future investigation.
I would not placing any of this sort of information under the marriage 
events. I try to be consistent and apply repetitive information to all 
individuals
associated with the events/fact. If a husband and wife immigrate on the 
same ship, is this a marriage event? I would apply it to both individual 
events.
Each individual must stand alone for research purposes and consistence. 
Focus on the genealogy side first, then reports, chart and vacations.


Fred Schwilk
San Jose, California


Laurel Feal wrote:
I like "everything" to print so I use Events a lot.  When I first started with Legacy, I entered everything under each Individual - so for example a Residence, I would enter it under the Husband and then again under the Wife.   This was great for Individual Reports, however, it didn't take too long to realize it was a lot of repetitious information when running other reports as the same information would be repeated.   


So now I enter "Individually" anything to do with a person that I consider relating to 
that person "only" such as his occupation, birth, etc... and anything to do with the 
Marriage such as Residences (while married), family trips, etc.. under Marriage Events.  This way 
no matter what the report, it shows a full history of a person or family without the same 
information printing out twice.




Date: Mon, 28 Jul 2008 07:16:50 -0400
From: [EMAIL PROTECTED]
Subject: [LegacyUG] Use of the marriage information
To: LegacyUserGroup@LegacyFamilyTree.com





When you are intering information that pertains to both spouses should you 
enter individually for each spouse or wuld it be better to enter it into the 
marriage section.  I am thinking of something like vacations or other things 
that the family might do.


Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

_




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp




  





Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Where to enter a street address?

[Art Seddon]

One has to wonder - How do you map items in the address list?
If the address is in the "Master" location list it is possible to map right 
to the house, farm, cemetary or whatever.

Art Seddon


- Original Message - 
From: TH
To: LegacyUserGroup@legacyfamilytree.com
Sent: Monday, July 28, 2008 4:21 PM
Subject: Re: [LegacyUG] Where to enter a street address?


Phil,

They're obviously obsessed with the mapping feature and too easily led by 
the "experts" who think the program's user manual and the instructions if 
provides are superfluous.

Tom Herson
Ithaca, NY


On Mon, Jul 28, 2008 at 5:45 PM, Phil Hawkins <[EMAIL PROTECTED]> wrote:

The MASTER LOCATION LIST is just that, a MASTER list. In the same way that 
the MASTER SOURCE LIST is a MASTER list.
Legacy designed it so that it lists town, county, state, country. And 
obviously, originally for USA locations.  (Those of us with ancestors and 
descendants from other parts of the world have to make a modification to the 
way the data is entered)

It is designed to give an overview of the area our ancestors lived

The EVENT address list is for the detail in the same way the SOURCE detail 
is designed.

Street numbers and addresses should be put in this list.
You wouldn't enter the address, date and all other details in the birth date 
column, but use the appropriate place that the program has supplied. Why try 
to add other details in the wrong place?

As has been reported many times – this causes problems


Regards
Phil
Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp


Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
No virus found in this incoming message.
Checked by AVG - http://www.avg.com
Version: 8.0.138 / Virus Database: 270.5.6/1577 - Release Date: 7/28/2008 
6:55 AM 


No virus found in this outgoing message.
Checked by AVG - http://www.avg.com 
Version: 8.0.138 / Virus Database: 270.5.6/1577 - Release Date: 7/28/2008 6:55 
AM




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] Use of the marriage information

[ronald ferguson]

Chap,

So do mine. I did use the Individual Reports as being one where I know they 
don't print. As I do not produce many reports, for all I know there may be 
others - hence the use of it an example rather than the only one (of which I do 
not know the accuracy).


Ron Ferguson

_

Update your British Prime Ministers Timeline - Blogs
http://www.fergys.co.uk
View the Grimshaw Family Tree at:
http://www.fergys.co.uk/Grimshaw/
For The Fergusons of N.W. England See:
http://myweb.tiscali.co.uk/fergys/
_




> Date: Mon, 28 Jul 2008 16:47:22 -0600
> From: [EMAIL PROTECTED]
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: Re: [LegacyUG] Use of the marriage information
>
> Ron:
>
> My marriage events prints in Descendant reports, Family group sheets & others.
> I tipically use a marriage event called:
> "Family Picture"
>
> in which I have text about a marriage picture or family group picture.
>
> It all prints just fine.
>
> I think there is an issue with certain named events not printing, but
> making new events like family picture, marriage picture, should work
> fine. You do have to have the Events & Event Pictures option checked
> in reports.
>
> Chap
>
> On Mon, Jul 28, 2008 at 4:06 PM, ronald ferguson  wrote:
>>
>> Phil,
>>
>> I guess we must have a different definition as to what is a marriage event. 
>> Mine don't, and the checkbox for displaying them is greyed out in the Report 
>> Options.
>>
>>
>> Ron Ferguson
>>
05:56:14 +0800
>>>
>>> Morning all
>>> My marriage events print when I print an individual report
>>>
>>> Regards
>>> Phil
>>>

_
The John Lewis Clearance - save up to 50% with FREE delivery
http://clk.atdmt.com/UKM/go/101719806/direct/01/


Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Use of the marriage information

[Alfred F. Schwilk]

Laurel wrote:
Whooops - the last part should have said "This way no matter what the 
report (except for the Individual Report), it shows a full history of 
a person or family without the same information printing out twice.   
I have moved away from using the "Individual Report" for this reason.



- Original Message - From: "Laurel Feal" 
<[EMAIL PROTECTED]>

To: 
Sent: Monday, July 28, 2008 10:43 AM
Subject: RE: [LegacyUG] Use of the marriage information




I like "everything" to print so I use Events a lot.  When I first 
started with Legacy, I entered everything under each Individual - so 
for example a Residence, I would enter it under the Husband and then 
again under the Wife. This was great for Individual Reports, however, 
it didn't take too long to realize it was a lot of repetitious 
information when running other reports as the same information would 
be repeated.


So now I enter "Individually" anything to do with a person that I 
consider relating to that person "only" such as his occupation, birth, 
etc... and anything to do with the Marriage such as Residences (while 
married), family trips, etc.. under Marriage Events.  This way no 
matter what the report, it shows a full history of a person or family 
without the same information printing out twice.





Date: Mon, 28 Jul 2008 07:16:50 -0400
From: [EMAIL PROTECTED]
Subject: [LegacyUG] Use of the marriage information
To: LegacyUserGroup@LegacyFamilyTree.com





When you are intering information that pertains to both spouses should 
you enter individually for each spouse or wuld it be better to enter 
it into the marriage section.  I am thinking of something like 
vacations or other things that the family might do.



Legacy User Group guidelines:
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

_




Legacy User Group guidelines:
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines:   
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:   
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp









Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Use of the marriage information

[Leon Chapman]

Ron:

My marriage events prints in Descendant reports, Family group sheets & others.
I tipically use a marriage event called:
"Family Picture"

in which I have text about a marriage picture or family group picture.

It all prints just fine.

I think there is an issue with certain named events not printing, but
making new events like family picture, marriage picture, should work
fine.  You do have to have the Events & Event Pictures option checked
in reports.

Chap

On Mon, Jul 28, 2008 at 4:06 PM, ronald ferguson <[EMAIL PROTECTED]> wrote:
>
> Phil,
>
> I guess we must have a different definition as to what is a marriage event. 
> Mine don't, and the checkbox for displaying them is greyed out in the Report 
> Options.
>
>
> Ron Ferguson
>
> _
>
> Update your British Prime Ministers Timeline - Blogs
> http://www.fergys.co.uk
> View the Grimshaw Family Tree at:
> http://www.fergys.co.uk/Grimshaw/
> For The Fergusons of N.W. England See:
> http://myweb.tiscali.co.uk/fergys/
> _
>
>
>
>
>> From: [EMAIL PROTECTED]
>> To: LegacyUserGroup@legacyfamilytree.com
>> Subject: RE: [LegacyUG] Use of the marriage information
>> Date: Tue, 29 Jul 2008 05:56:14 +0800
>>
>> Morning all
>> My marriage events print when I print an individual report
>>
>> Regards
>> Phil
>>
>
> _
> The John Lewis Clearance - save up to 50% with FREE delivery
> http://clk.atdmt.com/UKM/go/101719806/direct/01/
>
>
> Legacy User Group guidelines:
>   http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
>
>



-- 
___
Leon Chapman
[EMAIL PROTECTED]
-



Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] a problem with a source ?

[Valerie Garton]

Yes I agree that that is probably the situation BUT there are no blank
entries

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Elizabeth
Richardson
Sent: Monday, 28 July 2008 2:17 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

Valerie, this looks like you have no title or author for this source, rather

the (National Archives of Ireland) is the publication information. In that 
case, the "source" will be a blank entry at the beginning of your Master 
Sources list. Take a look there and see if you don't find something like 
what you're looking for.

Elizabeth
researching the descendants of William and Sarah (Patterson) Thompson

- Original Message - 
From: "Valerie Garton" <[EMAIL PROTECTED]>
To: 
Sent: Sunday, July 27, 2008 5:44 AM
Subject: [LegacyUG] a problem with a source ?


>I have a source which is on a family group record report which says:
>
> 3. (National Archives of Ireland)
>
> And this is not in my source list and so I am not able to find out who 
> else
> has the same source.
>
> I would like to delete this source but;
>
> a. I do not know who else has the same source
> b. As I can not find it I can not delete it
>
> I hope this makes sense to some one ?
>
> It looks to me as though it has been put some where as the Repository ?
>
> Regards from Valerie in sunny Sydney.
> Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
> Wexford
> Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
>
>
>
>
> Legacy User Group guidelines:
>   http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
> 




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] a problem with a source ?

[Valerie Garton]

Yes I am talking about the Master Source List.

How do I find any of the " Show only " items checked please ?

Regards from Valerie in sunny Sydney. 
Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
Wexford 
Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON

-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Dennis M.
Kowallek
Sent: Monday, 28 July 2008 12:49 AM
To: LegacyUserGroup@legacyfamilytree.com
Subject: Re: [LegacyUG] a problem with a source ?

If you have any one of the "Show Only" items checked, it could explain
why it is NOT showing up in the Master Source List. I assume when you
say "source list" you are referring to the Master Source List. Or are
you talking about the Assigned Sources for: window?

If that is not the problem than I am not comprehending your situation.
You say it is a source but later you say something about a repository.

Dennis

-- 

On Mon, 28 Jul 2008 00:11:19 +1000, "Valerie Garton"
<[EMAIL PROTECTED]> wrote:

>Thank you for your reply Dennis BUT it does not appear in the source list ?
>
>Sorry if I did not explain myself well enough.
>
>Regards from Valerie in sunny Sydney. 
>Researching: BEDDY, CULLODEN, DYAS and ROWAN in Belfast, Dublin, Wicklow &
>Wexford 
>Guild of One-Name Studies No: 4825 for CULLODEN & HIGGINSON
>
>-Original Message-
>From: [EMAIL PROTECTED]
>[mailto:[EMAIL PROTECTED] On Behalf Of Dennis M.
>Kowallek
>Sent: Sunday, 27 July 2008 11:57 PM
>To: LegacyUserGroup@legacyfamilytree.com
>Subject: Re: [LegacyUG] a problem with a source ?
>
>On Sun, 27 Jul 2008 23:44:16 +1000, "Valerie Garton"
><[EMAIL PROTECTED]> wrote:
>
>>I have a source which is on a family group record report which says:
>>
>>3. (National Archives of Ireland)
>>
>>And this is not in my source list and so I am not able to find out who
else
>>has the same source.
>
>In V6:
>
>Bring up your Master Source List and look at the right hand side of the
>window. You'll see a box that says "Show Only". Make sure none of these
>is checked.
> 



Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp








Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] Use of the marriage information

[ronald ferguson]

Phil,

I guess we must have a different definition as to what is a marriage event. 
Mine don't, and the checkbox for displaying them is greyed out in the Report 
Options.


Ron Ferguson

_

Update your British Prime Ministers Timeline - Blogs
http://www.fergys.co.uk
View the Grimshaw Family Tree at:
http://www.fergys.co.uk/Grimshaw/
For The Fergusons of N.W. England See:
http://myweb.tiscali.co.uk/fergys/
_




> From: [EMAIL PROTECTED]
> To: LegacyUserGroup@legacyfamilytree.com
> Subject: RE: [LegacyUG] Use of the marriage information
> Date: Tue, 29 Jul 2008 05:56:14 +0800
>
> Morning all
> My marriage events print when I print an individual report
>
> Regards
> Phil
>

_
The John Lewis Clearance - save up to 50% with FREE delivery
http://clk.atdmt.com/UKM/go/101719806/direct/01/


Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] IE 7 and mapping

[gtempleman1]

I have not seen any issues either. I cold understand it if perhaps it was a 
very early XP computer or even a previous Windows 98 or 2000 machine that was 
upgraded to XP and was really at the bottom end of hardware specs. Anything 
bought within the last few years shold be fine. I have IE7 on my 5+ year old 
laptop and no slowdowns.

Gary Templeman

-- Original message -- 
From: "Elsie Saar" <[EMAIL PROTECTED]> 

> I understand one needs to download IE 7 to have mapping work. I have 
> not done so as IE 7 seemed to slow down my friend's computer. Has 
> anyone else had this happen to them? I would like to use the mapping 
> feature. 
> Elsie (Scharpf) Saar 
> 
> 
> 
> 
> 
> 
> Legacy User Group guidelines: 
> http://www.LegacyFamilyTree.com/Etiquette.asp 
> Archived messages: 
> http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/ 
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp 
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp 
> 
> 
> 

RE: [LegacyUG] Use of the marriage information

[Phil Hawkins]

Morning all
My marriage events print when I print an individual report

Regards
Phil



Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] Where to enter a street address?

[Phil Hawkins]

The MASTER LOCATION LIST is just that, a MASTER list. In the same way that
the MASTER SOURCE LIST is a MASTER list.

Legacy designed it so that it lists town, county, state, country. And
obviously, originally for USA locations.  (Those of us with ancestors and
descendants from other parts of the world have to make a modification to the
way the data is entered)

 

It is designed to give an overview of the area our ancestors lived

 

The EVENT address list is for the detail in the same way the SOURCE detail
is designed.

 

Street numbers and addresses should be put in this list.

You wouldn't enter the address, date and all other details in the birth date
column, but use the appropriate place that the program has supplied. Why try
to add other details in the wrong place?

 

As has been reported many times - this causes problems

 

 

Regards

Phil





Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Use of the marriage information

[Michael Berry]

Thanks.  That's what I want to do and your reasoning agrees with mine.

Thanks.
- Original Message - 
From: "Laurel Feal" <[EMAIL PROTECTED]>

To: 
Sent: Monday, July 28, 2008 1:43 PM
Subject: RE: [LegacyUG] Use of the marriage information




I like "everything" to print so I use Events a lot.  When I first started 
with Legacy, I entered everything under each Individual - so for example a 
Residence, I would enter it under the Husband and then again under the Wife. 
This was great for Individual Reports, however, it didn't take too long to 
realize it was a lot of repetitious information when running other reports 
as the same information would be repeated.


So now I enter "Individually" anything to do with a person that I consider 
relating to that person "only" such as his occupation, birth, etc... and 
anything to do with the Marriage such as Residences (while married), family 
trips, etc.. under Marriage Events.  This way no matter what the report, it 
shows a full history of a person or family without the same information 
printing out twice.





Date: Mon, 28 Jul 2008 07:16:50 -0400
From: [EMAIL PROTECTED]
Subject: [LegacyUG] Use of the marriage information
To: LegacyUserGroup@LegacyFamilyTree.com





When you are intering information that pertains to both spouses should you 
enter individually for each spouse or wuld it be better to enter it into the 
marriage section.  I am thinking of something like vacations or other things 
that the family might do.



Legacy User Group guidelines:
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

_




Legacy User Group guidelines:
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp








Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Use of the marriage information

[Laurel]

Whooops - the last part should have said "This way no matter what the report 
(except for the Individual Report), it shows a full history of a person or 
family without the same information printing out twice.   I have moved away 
from using the "Individual Report" for this reason.



- Original Message - 
From: "Laurel Feal" <[EMAIL PROTECTED]>

To: 
Sent: Monday, July 28, 2008 10:43 AM
Subject: RE: [LegacyUG] Use of the marriage information




I like "everything" to print so I use Events a lot.  When I first started 
with Legacy, I entered everything under each Individual - so for example a 
Residence, I would enter it under the Husband and then again under the Wife. 
This was great for Individual Reports, however, it didn't take too long to 
realize it was a lot of repetitious information when running other reports 
as the same information would be repeated.


So now I enter "Individually" anything to do with a person that I consider 
relating to that person "only" such as his occupation, birth, etc... and 
anything to do with the Marriage such as Residences (while married), family 
trips, etc.. under Marriage Events.  This way no matter what the report, it 
shows a full history of a person or family without the same information 
printing out twice.





Date: Mon, 28 Jul 2008 07:16:50 -0400
From: [EMAIL PROTECTED]
Subject: [LegacyUG] Use of the marriage information
To: LegacyUserGroup@LegacyFamilyTree.com





When you are intering information that pertains to both spouses should you 
enter individually for each spouse or wuld it be better to enter it into the 
marriage section.  I am thinking of something like vacations or other things 
that the family might do.



Legacy User Group guidelines:
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

_




Legacy User Group guidelines:
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp







Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Use of the marriage information

[Bruce Jones]

Interesting questions.
My current approach on census is to put the full composition of the
household in the source detail text and use the clipboard to copy the source
to each census event.  Then, as long as I specify both events and source to
print, I get just one full copy of the household for any report.  I even
have some census events in both individual and marriage (duplication, I
know, but still prints just once in the sources).
I will be watching for any other thoughts on this matter to see if I want to
change my approach.
Just my current way.

On Mon, Jul 28, 2008 at 8:02 AM, Jenny M Benson <[EMAIL PROTECTED]>wrote:

> ronald ferguson wrote
>
>> For example, my main interst is in publishing on websites. On these I
>> mainly use the Pedigree and Family Group options and both of these will
>> publish the Marriage Events in the appropriate pages.
>>
>> However, If your interest is like to be in printing say, an Individual
>> Report then the Marriage Events will not print.
>>
>
> At first I thought the idea of having Marriage Events and entering things
> such as holidays etc was a nice idea, and I really see no good reason for
> *not* having the option to include them in Individual Reports.  After all,
> if Mr & Mrs Smith went on holiday together, Mr Smith went on holiday and why
> shouldn't that appear on a Report of his life?  More importantly, Divorce
> could well be considered a "noted event in their marriage" but should
> definitely appear in an Individual Report.
>
> Perhaps someone from Legacy would like to comment on the thinking behind
> excluding Marriage Events from Individual Reports?
>
> Taking a different point of view, though, where do you draw the line?  A
> couple going on holiday together could be a Marriage Event and could be
> entered as such.  But what about a family going on holiday?  Is that a
> Marriage Event?  What if they take the grandchildren?  Should that be
> entered as a Marriage Event and as an individual Event for the
> (grand)children?
>
> Personally, I tend to use Marriage Events only for things which relate very
> specifically to the *marriage* rather than generally to the married couple.
>  So, I consider a second marriage service or Blessing, a honeymoon, a
> Divorce to be specifically Marriage Events.
>
> I have a similar "individual entry" vs "group entry" quandary with
> Censuses.  Up to now, I have created Census Events for each individual and
> entered all the relevant details in the Description field, but only in the
> Event Notes for the Head of Household (provided the HoH has an entry in my
> family file) do detail the full composition of the household.  I put
> something like "Other members of the household were his wife X, their
> children Y and Z, a Parlourmaid and a Kitchenmaid." For the wife and
> children, the Event Notes read "See A" where A is the Head of Household.
>
> The disadvantage of this system is that I do not get that full overview of
> the household in any Reports which do not include the Head of Household - eg
> an Individual Report for one of the children.  It is for this reason that I
> am re-thinking how I enter Census information.
>
> I've plenty of time for a long re-think while I finish updating lots of my
> most-used Sources to the new standard and hope to GET IT RIGHT THIS TIME
> when I finally get around to tackling Censuses!
>
> --
> Jenny M Benson
>
>
>
>
> Legacy User Group guidelines:
> http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
> http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support: http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
>
>




Legacy User Group guidelines: 
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] IE 7 and mapping

[John Magyari]

On my Pentium III w/512Meg memory and Pentium 4 2.53GHz w/2Gig memory,
Using either IE6 or IE7 seems to give same performance to me.  I don't 
see a slow down.


IE7 and mapping is a cool feature on Rev 7.

Why don't you load IE7,  and try it,  you can remove it if it affects 
you machine and go back to the old IE6 if you have to.  You'll probably 
have no problems with IE7.


jdm

Elsie Saar wrote:
I understand one needs to download IE 7 to have mapping work. I have 
not done so as IE 7 seemed to slow down my friend's  computer. Has 
anyone else had this happen to them? I would like to use the mapping 
feature.

Elsie (Scharpf) Saar






Legacy User Group guidelines:   
http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:   
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp








Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

RE: [LegacyUG] Use of the marriage information

[Laurel Feal]

I like "everything" to print so I use Events a lot.  When I first started with 
Legacy, I entered everything under each Individual - so for example a 
Residence, I would enter it under the Husband and then again under the Wife.   
This was great for Individual Reports, however, it didn't take too long to 
realize it was a lot of repetitious information when running other reports as 
the same information would be repeated.   

So now I enter "Individually" anything to do with a person that I consider 
relating to that person "only" such as his occupation, birth, etc... and 
anything to do with the Marriage such as Residences (while married), family 
trips, etc.. under Marriage Events.  This way no matter what the report, it 
shows a full history of a person or family without the same information 
printing out twice.




Date: Mon, 28 Jul 2008 07:16:50 -0400
From: [EMAIL PROTECTED]
Subject: [LegacyUG] Use of the marriage information
To: LegacyUserGroup@LegacyFamilyTree.com





When you are intering information that pertains to both spouses should you 
enter individually for each spouse or wuld it be better to enter it into the 
marriage section.  I am thinking of something like vacations or other things 
that the family might do.


Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

_




Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

[LegacyUG] IE 7 and mapping

[Elsie Saar]

I understand one needs to download IE 7 to have mapping work. I have 
not done so as IE 7 seemed to slow down my friend's  computer. Has 
anyone else had this happen to them? I would like to use the mapping 
feature.

Elsie (Scharpf) Saar






Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Use of the marriage information

[Jenny M Benson]

ronald ferguson wrote
For example, my main interst is in publishing on websites. On these I 
mainly use the Pedigree and Family Group options and both of these will 
publish the Marriage Events in the appropriate pages.


However, If your interest is like to be in printing say, an Individual 
Report then the Marriage Events will not print.


At first I thought the idea of having Marriage Events and entering 
things such as holidays etc was a nice idea, and I really see no good 
reason for *not* having the option to include them in Individual 
Reports.  After all, if Mr & Mrs Smith went on holiday together, Mr 
Smith went on holiday and why shouldn't that appear on a Report of his 
life?  More importantly, Divorce could well be considered a "noted event 
in their marriage" but should definitely appear in an Individual Report.


Perhaps someone from Legacy would like to comment on the thinking behind 
excluding Marriage Events from Individual Reports?


Taking a different point of view, though, where do you draw the line?  A 
couple going on holiday together could be a Marriage Event and could be 
entered as such.  But what about a family going on holiday?  Is that a 
Marriage Event?  What if they take the grandchildren?  Should that be 
entered as a Marriage Event and as an individual Event for the 
(grand)children?


Personally, I tend to use Marriage Events only for things which relate 
very specifically to the *marriage* rather than generally to the married 
couple.  So, I consider a second marriage service or Blessing, a 
honeymoon, a Divorce to be specifically Marriage Events.


I have a similar "individual entry" vs "group entry" quandary with 
Censuses.  Up to now, I have created Census Events for each individual 
and entered all the relevant details in the Description field, but only 
in the Event Notes for the Head of Household (provided the HoH has an 
entry in my family file) do detail the full composition of the 
household.  I put something like "Other members of the household were 
his wife X, their children Y and Z, a Parlourmaid and a Kitchenmaid." 
For the wife and children, the Event Notes read "See A" where A is the 
Head of Household.


The disadvantage of this system is that I do not get that full overview 
of the household in any Reports which do not include the Head of 
Household - eg an Individual Report for one of the children.  It is for 
this reason that I am re-thinking how I enter Census information.


I've plenty of time for a long re-think while I finish updating lots of 
my most-used Sources to the new standard and hope to GET IT RIGHT THIS 
TIME when I finally get around to tackling Censuses!


--
Jenny M Benson



Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Where to enter a street address?

[RICHARD SCHULTHIES]

Rich is convinced. I am changing to 'Anaheim - 10 Main
St., Orange County, California, United States' before
I get too much to re-do. And I was getting all of the
Orange county stuff sorted by 'numbers', instead of
meaningful stuff. Old dog, new tricks.
Rich in LA CA
--- Cathy Vallevieni <[EMAIL PROTECTED]> wrote:

> Rich & Bruce & Keith:
> 
> Rich's way works just as well as 10 Main St.
> Anaheim, Orange, 
> California, USA as far as mapping and the Master
> Locations List.  In 
> fact, it might be better because there is a
> separator between the 
> street name and the city (in case someone is not
> familiar with the area).
> 
> I have noticed that Mapping (finding the long/lat)
> does not work well 
> with streets that are numbered (i.e. 147th Street). 
> With street with 
> names iIt seems to get pretty close results (within
> 3 houses or 
> so).  Is this your experience?
> 
> Probably going to bed now so will continue this
> "conversation" tomorrow.
> 
> Night Night.
> 
> Cathy Vallevieni
> Orange County, CA
> 
> At 11:19 PM 7/27/2008, you wrote:
> >The way I have been getting good results is.
> >10 Main St. - Anaheim, Orange County, California,
> >United States.
> >Rich in LA CA
> >--- Cathy Vallevieni <[EMAIL PROTECTED]> wrote:
> >
> > > Bruce:
> > >
> > > I'm fairly new to using Legacy so someone else
> may
> > > be able to answer
> > > this better than I can but I know the system
> > > considers (at least in
> > > the USA) the space before the first comma to be
> the
> > > city, before the
> > > second comma to be the county, before the third
> > > comma to be the State
> > > and after the third comma to be the country. 
> IE.
> > > For 10 Main St.,
> > > Anaheim, Orange, California, USA, "10 Main St."
> > > would be considered
> > > to be the city, "Anaheim" would be considered to
> be
> > > the county,
> > > "Orange" would be consider to be the State and
> > > "California" would be
> > > considered to be the Country.  If you have USA
> > > County Verification
> > > turned on, when you enter with the comma between
> the
> > > street address
> > > and city, you will always get an error message
> that
> > > says "There was
> > > never a county by the name of Anaheim in the
> State
> > > of Orange."  In
> > > the Master Location List it would drop the USA
> and
> > > show it as
> > > California being the Country, Orange being the
> > > State, etc.  I'm sure
> > > there's similar problems with reports and
> searching
> > > but I didn't try
> > > since I realized right away that there was going
> to
> > > be a problem, I
> > > just dropped the extra comma immediately.
> > >
> > > If you come up with a better way to accomplish
> what
> > > you and I are
> > > trying to do, let me know.
> > >
> > > Thanks.
> > >
> > > Cathy Vallevieni
> > > Orange County, CA
> > >
> > > At 11:00 PM 7/26/2008, you wrote:
> > > >Cathy,
> > > >Thanks for the details of how your are entering
> > > address information.
> > > >Following your method does seem to avoid the
> > > problem of the Geo
> > > >Location List not functioning if you put in the
> > > address, which I
> > > >thought was the ONLY problem with entering the
> > > address in the location field.
> > > >What problems would I have if I DID put a comma
> > > between the street
> > > >name and the city?
> > > >Thanks,
> > > >Bruce
> > > >
> > > >On Sat, Jul 26, 2008 at 9:02 AM, Cathy
> Vallevieni
> > > ><[EMAIL PROTECTED]>
> > > wrote:
> > > >Tom:
> > > >
> > > >I posted the initial question.  After reading
> all
> > > the responses and
> > > >trying lots of ways, for the reasons you cited
> > > (mapping, showing on
> > > >all reports, can print 1 report showing all
> > > addresses, etc.), I am
> > > >now entering the street # and street name in
> the
> > > "Place"
> > > >field.  Here's how I'm doing it:
> > > >
> > > >1.  Enter the city, county, etc. (not the
> street #
> > > and name) and use
> > > >Geo Location List (world globe on the right) to
> > > give it the correct
> > > >format and save that.
> > > >2.  In the Family Screen add the street # and
> > > street name WITH NO
> > > >COMMA BETWEEN THE STREET NAME AND CITY
> otherwise it
> > > messes up the
> > > >structure and the system thinks the city is the
> > > county.
> > > >3.  Map the individual which inserts the exact
> > > Longitude and
> > > >Latitude for this address.
> > > >
> > > >It does create a new Master Location which
> shows at
> > > the top of the
> > > >ones in that city, but that's fine.  From
> Master
> > > Location List you
> > > >can see everyone using that location.  You can
> also
> > > tag all the
> > > >addresses in the city and print a report if you
> are
> > > going to the
> > > >area and wanted to take pictures of each
> location.
> > > >
> > > >This accomplishes all I want and I haven't
> found a
> > > down side yet in
> > > >my playing around with reports, etc.
> > > >
> > > >
> > > >Cathy Vallevieni
> > > >Orange County, CA
> > > >
> > > >
> > > >At 

RE: [LegacyUG] Use of the marriage information

[ronald ferguson]

Michael,

This very much depends on what you wish to do with your files. For example, my 
main interst is in publishing on websites. On these I mainly use the Pedigree 
and Family Group options and both of these will publish the Marriage Events in 
the appropriate pages.

However, If your interest is like to be in printing say, an Individual Report 
then the Marriage Events will not print.

I would suggest that you try out various options and have a look at the output 
to see what will suit you best.


Ron Ferguson

_

Update your British Prime Ministers Timeline - Blogs
http://www.fergys.co.uk
View the Grimshaw Family Tree at:
http://www.fergys.co.uk/Grimshaw/
For The Fergusons of N.W. England See:
http://myweb.tiscali.co.uk/fergys/
_







Date: Mon, 28 Jul 2008 07:16:50 -0400
From: [EMAIL PROTECTED]
Subject: [LegacyUG] Use of the marriage information
To: LegacyUserGroup@LegacyFamilyTree.com





When you are intering information that pertains to both spouses should you 
enter individually for each spouse or wuld it be better to enter it into the 
marriage section.  I am thinking of something like vacations or other things 
that the family might do.



_
Find the best and worst places on the planet
http://clk.atdmt.com/UKM/go/101719807/direct/01/


Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp

Re: [LegacyUG] Longitude and Latitude--Legacy vs Virtual Earth (CORRECTION)

[Cathy Vallevieni]

Richard & Keith:

Oh, got it (didn't have the "Show Map" box checked)e.  Cool!

By the way, it works in "Aerial" view which is great because you can 
see the structures to know where to click.


Boy, this will be easier than manually changing them.

Now, how to know which dwelling when you aren't familiar with the 
area?  That's for another day and time to figure out!


Thanks everyone!

Hope this thread helps everyone that is working with exact addresses 
and wants to map them and have them show in all reports.


Cathy Vallevieni
Orange County, CA

At 11:26 PM 7/27/2008, you wrote:

You should have the screen with the choices (up to 3)
showing a map, locations and people found there.
Highlight the location you want. Then find the place
on the map. It can be a 'former place'. My family's
rented place is now under I75 in Cincinnati. When you
are near to where it should be, right click on the
mouse. It may take 3 times to place the balloon where
you like it best. For myself, I try to put it in the
alley or backyard, so I can see the building.
Rich in LA CA
--- Cathy Vallevieni <[EMAIL PROTECTED]> wrote:

> Keith:
>
> When I am in the Master Location List, what do I
> click to get to a
> map to "hover" over the correct location as Tom
> described?
>
> Thanks.
>
> Cathy Vallevieni
> Orange County, CA
>
>
> At 10:52 PM 7/27/2008, you wrote:
> >The right click only work on the Master Location
> List to reposition
> >and reset Lat/Long.  If you are on a map from the
> individual family
> >view - click RESOLVE to get to Master Location.
> That may be the
> >problem.
> >
> >Keith
> >
> >On Mon, Jul 28, 2008 at 1:08 AM, Cathy Vallevieni
> <[EMAIL PROTECTED]> wrote:
> > > Tom:
> > >
> > > Sounds like a great trick rather than having to
> determine the correct
> > > long/lat in Virtual Earth (or by guessing) then
> manually entering them in
> > > the Master Location List "Edit" function.
> However, when I right
> > clicked, it
> > > just moved the page around just like when I left
> click.  I think the right
> > > button on my mouse is set just like everyone
> else's (at least it functions
> > > normally in other instances); but, perhaps it is
> not.  I'll have to play
> > > around with it to see.
> > >
> > > Thanks for the heads up, though.
> > >
> > > Glad my other information could help you.
> > >
> > > Cathy Vallevieni
> > > Orange County, CA
> > >
> > > At 06:45 AM 7/27/2008, you wrote:
> > >
> > > Cathy,  Not sure this specifically applies but I
> found that if you hover
> > > your pointer over the specific location you want
> in "road" view (doesn't
> > > work in bird's eye view) and right click, the
> software will ask you if you
> > > want to move the marker to the right clicked
> location, just say yes and it
> > > should automatically register. Thanks for the
> information on my
> > problem with
> > > residences, looks to be just what I needed! Tom
> McKeever
> > >
> >
> >
> >--
> >Surnames: McKain, Horn, Riale, Ulrich, Erisman,
> Leiphart, Reed and Henry
> >
> >Website: http://home.comcast.net/~geosci64
> >EMail: [EMAIL PROTECTED]
> >McCain-McKane-O'Kane DNA Group 1
> >
> >
> >
> >Legacy User Group guidelines:
> >http://www.LegacyFamilyTree.com/Etiquette.asp
> >Archived messages:
> >
>
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> >Online technical support:
> http://www.LegacyFamilyTree.com/Help.asp
> >To unsubscribe:
> http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
>
>
> Legacy User Group guidelines:
>http://www.LegacyFamilyTree.com/Etiquette.asp
> Archived messages:
>
>
http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
> Online technical support:
> http://www.LegacyFamilyTree.com/Help.asp
> To unsubscribe:
> http://www.LegacyFamilyTree.com/LegacyLists.asp
>
>
>
>




Legacy User Group guidelines:
   http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages:
   http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/
Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp





Legacy User Group guidelines: 
  http://www.LegacyFamilyTree.com/Etiquette.asp
Archived messages: 
  http://www.mail-archive.com/legacyusergroup@legacyfamilytree.com/

Online technical support: http://www.LegacyFamilyTree.com/Help.asp
To unsubscribe: http://www.LegacyFamilyTree.com/LegacyLists.asp