Re: [newbie] K Mail question
On Thursday 24 March 2005 20:29, SOTL wrote: On Wednesday 23 March 2005 23:35, Aron Smith wrote: k Mail is opening ok but when you shut it down there is a pop under that tells you KDEInit could not launch kontact-kmail.sh OK so whats wrong? You open Kmail by opening Kmail. You did not open Kmail by opening Kcontact first. If you do not want the error message open Kcontact and that will take you directly to Kmail Oh wow! I've been googling for this error all my life. Thanks you very much SOTL. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 23:13:40 up 53 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Getting packages...
On Thursday 24 March 2005 23:15, Ronald J. Hall wrote: On Thursday 24 March 2005 10:12 am, Derek Jennings wrote: This is a src.rpm installing it simply puts the source tarball in ~/rpm/SOURCES and the .spec file in ~/rpm/SPECS where they can be compiled with an rpmbuild command (also as user). Once compiled a binary rpm package appears in ~/rpm/RPMS/i586 which then has to be installed as root. derek Ah, that explains it. Thanks! :-) Or if we use root, the rebuild command will put the rpm file directly in /usr/src/RPMS/i586 etc -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 23:17:35 up 57 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Games recommendation
On Wednesday 23 March 2005 02:11, H.J.Bathoorn wrote: On Tuesday 22 March 2005 22:59, JR wrote: On Monday 21 March 2005 10:08 pm, Fajar Priyanto wrote: Hi folks, snip Do you have any recommendation on games that can relieve our stress level? Thanks :) I love airstrike. Their still working on it but the version released at the moment is playable against another player or the computer. It's based on 'bip' (bi-plane). Try enigma if you like puzzles.and of course sirtet if you like tetris. Thank you all for all the suggestions. I have fun playing all these new games. I especially like alienbuster, however the game ends after killing two bosses :( So short. Also airstrike, a bit difficult, but quite fun. I still have several games to try, alienpool, amphetamine, alephone (notice the alphabet 'a'?) Hehe.. So many games to dig out and try. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 23:50:30 up 3:22, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Mandrake as a Firewall
On Wednesday 23 March 2005 19:46, Anne Wilson wrote: quote Mandrake Linux offers one of the best OSS Firewall servers available today /quote http://www.flexbeta.net/main/articles.php?action=showid=87perpage=1pagen um=1 is a detailed account of using 10.1 as a dedicated firewall. Anne Superb link Anne! I didnt know that we can download Mandrake's MNF. I'm downloading it on to my notebook, and will deploy it into my current gateway/firewall box once I get a grip on the conf. Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 23:54:52 up 3:26, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] What prevents me from moving to Suse92
Dear all, I don't want to start a flame war, but I just want you to know, that there is ONE thing that prevents me from moving to Suse92. As you know, I've dualbooted my notebook with Suse92 now. And actually I like it very much. You can say that it's kind of Ahhh.. Woooww.. However, after a couple of weeks of observation, there is one thing that keeps me using Mdk, that is THIS LIST. Sure, I've joined the Suse's list too, but, the feelings aren't just the same. I guess I've helplessly given my loyalty to Mdk. :) P.S. The KDE3.4 on mdk10.1 also contributes to it. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 00:12:28 up 3:44, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Mandrake as a Firewall
On Thursday 24 March 2005 00:02, Anne Wilson wrote: Superb link Anne! I didnt know that we can download Mandrake's MNF. I'm downloading it on to my notebook, and will deploy it into my current gateway/firewall box once I get a grip on the conf. Thanks. I got it off-list from a friend - I thought it was too good to keep to myself :-) Anne Okay, I've got it all downloaded. Here's a short stories of what happened then: 1. I opened https://localhost:8443, connection refused. Apparently it runs on a separate instance of apache called httpd2-naat. I ran it and it showed. 2. But the page only showed: Looks like you have naatd running. Congrats 3. I googled around but couldn't find anything related. 4. Out of luck, I opened https://localhost:8443/index.php and there was it, the login screen. Wow. 5. Fiddling around a bit and quite impressed by the features. I guess I'll have to run it on a real testbed machine to get a grip on the confs. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 08:59:30 up 7:19, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K Mail question
On Thursday 24 March 2005 11:35, Aron Smith wrote: k Mail is opening ok but when you shut it down there is a pop under that tells you KDEInit could not launch kontact-kmail.sh OK so whats wrong? I have this error too. Haven't succeded with google yet. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 12:01:04 up 10:21, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K Mail question
On Thursday 24 March 2005 12:37, Aron Smith wrote: On Wednesday 23 March 2005 09:01 pm, Fajar Priyanto wrote: On Thursday 24 March 2005 11:35, Aron Smith wrote: k Mail is opening ok but when you shut it down there is a pop under that tells you KDEInit could not launch kontact-kmail.sh OK so whats wrong? I have this error too. Haven't succeded with google yet. do you have kontact installed I don't Yes I have it installed. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 14:35:54 up 54 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KDE3.4 cannot shutdown
On Tuesday 22 March 2005 17:17, Paul Smith wrote: Thanks Paul, After I change it from mdkkdm to kdm, I can shutdown normally again. If you, Fajar, prefer mdkkdm, select it and use the command halt in a console. Yes, actually i like mdkkdm better (the graphics is nicer), but using console to shutdown? I dont think it's nice. Because it won't save my KDE sessions, do you think so? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 00:48:59 up 5:19, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Games recommendation
On Tuesday 22 March 2005 21:13, Ronald J. Hall wrote: RPG - Neverwinter Nights 1st person shooters - Ut2004, Quake 3, Rune, Doom3 Military - Medal of Honor: Allied Assault If you want to run Transgamings' Cedega software, you can run the likes of: Diablo2-Lord of Destruction, Starcraft-Brood Wars, Knights of the Old Republic 1 and 2 (Sith Lords), Dungeon Siege, Elder Scrolls-Morrowind, Star Wars Jedi Knight and Jedi Academy, Warcraft 3: Frozen Throne and even World of Warcraft. Of course these are commercial, and there are plenty of free games to play as others have mentioned. Chromium, Critical Mass, and Armagetron spring to mind right away. Lots of options, and many more games than I've mentioned so get out there and get gaming! :-) Aiyaa.. Those are 'heavy and very serious games'. They have their own stress level to play :) I'm looking for easy games to kill times. Well, I've installed 2 free RPGs, but unfortunately cannot run. The games die :( I guess I'll have to browse from letter 'C' onward later. Using the mcc KDE/GNOME doesnt show the games. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 00:51:02 up 5:21, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] KDE3.4 cannot shutdown
Hi all, The KDE3.4 is wonderful. I love it very much. However, there are still some hiccups that need to sort out, one of them is: I cannot shutdown my notebook. When I click on the log out then shutdown the screen blanks, then the logon screen appears again. Is this a bug? How can I fix it? Thanks, -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 15:04:54 up 4:36, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KDE3.4 cannot shutdown
On Monday 21 March 2005 16:43, Paul Smith wrote: On Mon, 21 Mar 2005 15:06:54 +0700, Fajar Priyanto [EMAIL PROTECTED] wrote: The KDE3.4 is wonderful. I love it very much. However, there are still some hiccups that need to sort out, one of them is: I cannot shutdown my notebook. When I click on the log out then shutdown the screen blanks, then the logon screen appears again. Is this a bug? How can I fix it? I remember you that you can shutdown your computer running the command halt in a console. Are you using kdm or mdkkdm, Fajar? Paul Hi Paul, Thanks for resposing. I guess I'm using mdkkdm, but how do I know this? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 22:20:31 up 11:52, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KDE3.4 cannot shutdown
On Tuesday 22 March 2005 02:07, Paul Smith wrote: On Mon, 21 Mar 2005 22:21:14 +0700, Fajar Priyanto [EMAIL PROTECTED] wrote: The KDE3.4 is wonderful. I love it very much. However, there are still some hiccups that need to sort out, one of them is: I cannot shutdown my notebook. When I click on the log out then shutdown the screen blanks, then the logon screen appears again. Is this a bug? How can I fix it? I remember you that you can shutdown your computer running the command halt in a console. Are you using kdm or mdkkdm, Fajar? Thanks for resposing. I guess I'm using mdkkdm, but how do I know this? Fajar, You can check it out doing the following: MCC -- System -- Display Manager Paul Thanks Paul, After I change it from mdkkdm to kdm, I can shutdown normally again. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 09:46:46 up 7 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] MD 10.1 System Halt During Boot.
On Tuesday 22 March 2005 08:49, Mikkel L. Ellertson wrote: I would boot without the mouse plugged in, and see if it boots. If it does, then plug the mouse in. Then make sure you have all the updates installed. After installing the updates, see if the system boots ok with the USB mouse plugged in. If not, let us know, and we can explore other options. Mikkel Yes, try to localize the problem. However, I'm using usb optical mouse too (china brand though.. very generic and cheap :)). But, hardware problems are always specific and difficult to solve sometimes. Trial and error methods are the best way most of the time. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 10:02:21 up 23 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Games recommendation
Hi folks, I've been browsing to the package available in mdk10.1, and I find many interesting packages once I click on them and read the description. Right now, I've just passed the packages start with 'b', phew..! I'm now installing many interesting games, such as adonthell, brutal, and.. many rpg like games I forgot the names :) Do you have any recommendation on games that can relieve our stress level? Thanks :) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 10:05:02 up 25 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KDE 3.4 - successful install - yes!
On Sunday 20 March 2005 06:10, Mr. Geek wrote: Guys, you're beating yourselves up for nothing on this. After you add Thac's RPM's to urpmi, take a moment to install the ICE desktop or some other one. Chances are that you'll have at least 2 desktop environments installed anyway. Once you're all done, log out of this desktop environment and log back into KDE and enjoy. Yup! I managed to clear up the hiccups. Apparently Kmail 1.8 now puts the mail folder in ~/.kde/share/apps/kmail/mail After moving the old mail folder from ~/.Mail, now, I have my all my old emails and folder again :) Yay! Kmail 1.8 is really something. I like it very much. Seems more slim but yet featurefull. One thing I like is that we now can see the spam meter in the form of graphics coloured from green to red :) fantastic. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 19:12:38 up 3:11, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KDE 3.4
On Saturday 19 March 2005 10:32 am, Miark wrote: On Fri, 18 Mar 2005 16:37:00 -0600, Leaf wrote: KDE 3.4 is out. There are SuSE, Fedora and Conectiva packages available, but no Mandrake rpms. Is there any way to urpmi them? Check Thac's RPMs http://rpm.nyvalls.se/10.1/RPMS/ , you can add Thacs to your urpmi resources as well. Another good place for non-mandrake club members is the dutch users group MCNL. The last time I used Thac's RPMs for KDE, it was a nightmare, as it was for at least a few other people. Any reason to expect similar problems with 3.4 RPMs? Miark I'm going to do the upgrade.. wish me luck :) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 19:17:57 up 4:15, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KDE 3.4
On Saturday 19 March 2005 10:32 am, Miark wrote: On Fri, 18 Mar 2005 16:37:00 -0600, Leaf wrote: KDE 3.4 is out. There are SuSE, Fedora and Conectiva packages available, but no Mandrake rpms. Is there any way to urpmi them? Check Thac's RPMs http://rpm.nyvalls.se/10.1/RPMS/ , you can add Thacs to your urpmi resources as well. Another good place for non-mandrake club members is the dutch users group MCNL. The last time I used Thac's RPMs for KDE, it was a nightmare, as it was for at least a few other people. Any reason to expect similar problems with 3.4 RPMs? Miark Ugh.. can i use urpmi, or should i do it manually? Because i've got this error: urpmi.addmedia thacs http://rpm.nyvalls.se/10.1/RPMS with list added medium thacs examining synthesis file [/var/lib/urpmi/synthesis.hdlist.jpackage.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.contrib.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.updates.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-nonfree.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.main.cz] examining synthesis file [/var/lib/urpmi/synthesis.hdlist.plf-free.cz] retrieving source hdlist (or synthesis) of thacs... http://rpm.nyvalls.se/10.1/RPMS/list found probed hdlist (or synthesis) as list ...retrieving done examining hdlist file [/var/cache/urpmi/partial/hdlist.thacs.cz] examining synthesis file [/var/cache/urpmi/partial/hdlist.thacs.cz] unable to parse hdlist file of thacs examining synthesis file [/var/lib/urpmi/synthesis.hdlist.thacs.cz] problem reading synthesis file of medium thacs unable to update medium thacs -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 19:20:09 up 4:18, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Possible alternative format for forum
On Thursday 17 March 2005 10:57 pm, Julie Sloan wrote: Nicole I am using a Best Data V.92 External on a dual boot Mandrake 10.0 and WinXP. It wasn't terribly expensive - about US$40 I think I'm surprised guys. I thought nobody still use dial up modem in USA or any other western country. You watch video streaming of CNN on the net right? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 02:44:54 up 3:51, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Possible alternative format for forum
On Friday 18 March 2005 02:46 am, Fajar Priyanto wrote: On Thursday 17 March 2005 10:57 pm, Julie Sloan wrote: Nicole I am using a Best Data V.92 External on a dual boot Mandrake 10.0 and WinXP. It wasn't terribly expensive - about US$40 I think I'm surprised guys. I thought nobody still use dial up modem in USA or any other western country. You watch video streaming of CNN on the net right? Anyway, at least you've got flat rate. It my country, using phone line for internet will seriously blow one's wallet as the bill is charged based on minutes :( -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 02:49:19 up 3:55, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Fwd: [linux-aktivis] [JOKE] The Creation (Microsoft Style)
The Creation (Microsoft Style) 1. In the beginning GOD created the Bit and the Byte. And from those he created the Word. 2. And there were two Bytes in the Word; and nothing else existed. And God separated the One from the Zero; and he saw it was good. 3. And God said - Let the Data be; And so it happened. And God said - Let the Data go to their proper places. And he created floppy disks and hard disks and compact disks. 4. And God said - Let the computers be, so there would be a place to put floppy disks and hard disks and compact disks. Thus God created computers and called them hardware. 5. And there was no Software yet. But God created programs; small and big. And told them - Go and multiply yourselves and fill all the Memory. 6. And God said - I will create the Programmer; And the Programmer will make new programs and govern over the computers and programs and Data. 7. And God created the Programmer; and put him at Data Center; And God showed the Programmer the Catalog Tree and said You can use all the volumes and subvolumes but DO NOT USE Windows. 8. And God said - It is not Good for the programmer to be alone. He took a bone from the Programmer's body and created a creature that would look up at the Programmer; and admire the Programmer; and love the things the Programmer does; And God called the creature: the User. 9. And the Programmer and the User were left under the naked DOS and it was Good. 10. But Bill was smarter than all the other creatures of God. And Bill said to the User - Did God really tell you not to run any programs ? 11. And the User answered - God told us that we can use every program and every piece of Data but told us not to run Windows or we will die. 12. And Bill said to the User - How can you talk about something you did not even try. The moment you run Windows you will become equal to God. You will be able to create anything you like by a simple click of your mouse. 13. And the User saw that the fruits of the Windows were nicer and easier to use. And the User saw that any knowledge was useless - since Windows could replace it. 14. So the User installed the Windows on his computer; and said to the Programmers that it was good. 15. And the Programmer immediately started to look for new drivers. And God asked him - What are you looking for? And the Programmer answered - I am looking for new drivers because I can not find them in the DOS. And God said - Who said you need drivers? Did you run Windows? And the Programmer said - It was Bill who told us to ! 16. And God said to Bill - Because of what you did you will be hated by all the creatures. And the User will always be unhappy with you. And you will always sell Windows. 17. And God said to the User - Because of what you did, the Windows will disappoint you and eat up all your Resources; and you will have to use lousy programs; and you will always rely on the Programmer's help. 18. And God said to the Programmer - Because you listened to the User you will never be happy. All your programs will have errors and you will have to fix them and fix them to the end of time. 19. And God threw them out of the Data Center and locked the door and secured it with a password. 20. GENERAL PROTECTION FAULT. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 00:00:17 up 5:42, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] qmail cool site
On Wednesday 16 March 2005 12:37 am, Fernando Arturo Gómez Flores wrote: Hello all. Finally, I'm done running QMail. I'd like to recommend this website which helped me a lot: www.qmailrocks.org. Just in case... Greetings, Fernando Gómez. Yes, nice you find it too. I've used it since late 2003. Very nice guy who sets it up. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 02:00:15 up 7:42, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Microsoft to patent XML
On Tuesday 15 March 2005 08:28 am, Fernando Arturo Gómez Flores wrote: As the Merovingio said: Disappointing... but not unexpected. Greetings, Fernando Gomez. Give my regards to the Broad Street. Does it mean the doomsday for OpenOffice? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 06:59:20 up 12:48, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Cleaning optical mouse
On Monday 14 March 2005 12:38 pm, Miark wrote: On Sun, 13 Mar 2005 16:59:41 -0600, Chris wrote: Question is, how is this mouse cleaned? Do I clean the lens on the bottom? If so, with what? I've had a MS optical mouse for at least 3 years and have never had to clean it, although I blow lint out with just my mouth once in a while. This makes me notice that there is some dust building up on the lense. And strange, when I blow air into it with my mouth, the laser lights up :) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 07:02:07 up 12:51, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Installing Linux on extended partition (logical drive)
On Thursday 10 March 2005 01:13 am, Mikkel L. Ellertson wrote: I tried it first, but lilo complained about 'no root partition found' Let me guess - the second copy of lilo is the one that complained, right? If so, check your /etc/lilo.conf in Suse, and make sure it is correct. Make sure you run lilo in Suse after you make any changes in that copy of the config file. The thing you have to remember here is that you will be using two separate lilo installs to boot Suse. The version from Mandrake handles booting Mandrake, and Windows. To boot Suse, it will hand control over to the Suse lilo install, and it will handle booting Suse. No, the one that complained is Mdk's lilo. That's why then I googled and found the way to 'load' Suse's lilo from Mdk by mounting the partition in Mdk. As far as the Mandrake version of lilo knows, it could be booting any OS when it uses the other=/dev/hda10 entry. Yes, that is why. I am surprised it even boots. If the old version of the kernel and initial RAM disk were removed as part of the upgrade, then the only reason it still boots is that the space they use on the disk has not been overwritten by new data. The thing you have to understand about lilo is that it is really two separate parts. The part you run from Linux understands the file system, and configures things for the part that actually boots the system. The part that boots the system does not understand the file system. All it know is where the information it wants is located on the disk. You gave it this information when you ran lilo in Linux. But if you make changes, you have to run lilo again, to update this information. With the normal setup, this is not a problem. The package managers in both Suse and Mandrake take care of running lilo for you when you update the kernel. But, because you are using the Mandrake copy of lilo to boot Suse, Yast updates the wrong version of lilo. Mandrake does not take care of it, because it has no idea that you updated the kernel in Suse. So you have to do it manually. I would spend the time getting the version of lilo on /dev/hda10 working, and using the other=/dev/hda10 option to boot Suse. Or I would consider changing Mandrake to use Grub instead of Lilo. Grub does understand file systems, so it would handle the kernel changing in Suse better. You would still have to make sure and update the grub config files when you change kernels, but at least if would warn you when you break things. Now, if you want a real challenge, install one of the other boot manages on the MBR, change Mandrake lilo so it installs to your root partition instead of the MBR, and let the boot manager give you a menu for Mandrake, Suse, or Windows. There are several options for free boot managers on freshmeat, or you could go with something like System Commander. Mikkel Thank you so much for the very detail explanation Mikkel. I really appreaciate it. Your explanation opens up a new understanding for me on Linux bootloader. I will surely experiment it on my spare pc. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 21:34:16 up 30 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KMail configuration
On Thursday 10 March 2005 03:18 pm, Anne Wilson wrote: Take a look at the difference between your messages and Mikkel's. Anne I'm sorry, but I don't see any difference between his email and mine? In the footer? No, it's the same. Strange. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 21:49:17 up 45 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] New HP laptop with NTFS Partition and trying to dual boot
On Thursday 10 March 2005 07:13 pm, Mr. Geek wrote: However, if your hard drive is already partitioned, they only use which ever partition is first on the drive. The nice thing is that the restore or full install methods won't do anything to your Master Boot Record, since Windows detects that the Master Boot Record is already in use. Lilo is already installed there. That means that the next time you boot the laptop, Lilo will still be there, and will only show you the Mandrake-Linux option. Yes, I experimented with my Acer TM802 too (I had to reinstall and format the drive several time cause of mistakes). Not every recovery CD will allow you to resize the partition though. In case of Acer, they allow it, so it makes thing easier. And it will not destroy the Lilo. Lol, I once wanted to send my notebook to the service center, but afraid that the guarantee would be void if they know I installed linux. No problem. That's exactly what should be there. Once you've booted back into Linux, start up your Mandrake Control Center (a.k.a. MCC), and add the 10Gb Windows partition by creating a mount point for it. You're not obligated to use the Mandrake default mount-point, so feel free to be creative. Just don't mount it inside the /root home folder! Windows will not format the remaining space as FAT32. But Mandrake will! Leave it to Linux to solve a Microsoft problem! LOL! Yes, linux is certainly very friendly :) By using Linux to format your remaining space as FAT32, you'll be able to access it from Mandrake AND from Windows without any problems. Once that's partitioned, formatted and mounted in MCC, remember to update Lilo as well. That way, Windows will be added to your boot list in Lilo. This is a good practice indeed. I have my D drive in windows as FAT32. Thanks Mr. Geek. Your explanation is crystal clear. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 22:00:30 up 57 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Installing Linux on extended partition (logical drive)
On Thursday 10 March 2005 11:43 pm, Mikkel L. Ellertson wrote: Note: If you used image=/dev/hda10 instead of other=/dev/hda10, then you might get the 'no root partition found' error. I am not sure what the first error would be, but lilo stops at the first error it finds. Yes, that's the one. I used the other=/dev/hda10. Like this: other=/dev/hda10 label=Suse92 table=/dev/hda The error was no root partition found. Yes. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:23:52 up 7:20, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] scribus users, pls help. pasting text longer than 1 page.
On Wednesday 09 March 2005 06:02 pm, Anne Wilson wrote: Scribus is so promising, and I understand that it is a rapidly developing project, so maybe this is on the way. Thanks everyone for the response. I managed to link the frame. But I'm having trouble in making a template so that I don't have to copy paste the image that I'm using as header. I subscribed to the scribus list just now. But in the mean time I use Openoffice to produce the pdf. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:29:03 up 7:25, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KMail configuration
On Thursday 10 March 2005 11:49 pm, Anne Wilson wrote: On Thursday 10 Mar 2005 14:50, Fajar Priyanto wrote: On Thursday 10 March 2005 03:18 pm, Anne Wilson wrote: Take a look at the difference between your messages and Mikkel's. Anne I'm sorry, but I don't see any difference between his email and mine? In the footer? No, it's the same. Strange. How strange. It isn't here - see attached. Anne Oh wow.. yes. Your Kmail surely has something different in it. Here's what Mikkel footer in my Kmail. Exactly the same as mine that shows in your kmail. Yours is 1.7.1 too? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:34:59 up 7:31, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key attachment: mikkel-footer.jpg Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] E mail server
On Friday 11 March 2005 02:06 am, Fernando Arturo Gómez Flores wrote: I'd like to hear some opinions about, maybe someone out there can help me choose a server. Furthermore, I'd thank a lot if someone can provide me a tutorial, docs, etc, on what I need for making this stuff work (I'm looking at postfix.org docs 'cause Postfix seems to be reliable, but the material there is rather confussing...). Right now I'm using qmail. There are many people out there who make a 'toaster' for qmail installation. Toaster is thing where they put everything useful about qmail in one easy installation package/howto. Some that are well known are qmailrocks.org and qmailtoaster. As for postfix. I'm interested in learning it. And like you said, the explanation is rather confusing :) Well, nothing to worry though. If there is a will there is a way, isn't it? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:40:17 up 7:36, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] cannot add printer on network
Hi all, I've been trying to configure CUPS to add network printer on windows machine without success. I use mcc to set it up, but when I click search, there's nothing shows up. This is also the reason as you know why I try to migrate to Suse by dualbooting it in hda10 :) But using Yast, I can't find the network printer either :( I can add the printer directly by typing //pcname/printername, but CUPS doesn't ask me for printer brand and type at all. And, when I try to print to it, the data transfer lamp on the printer blinks but nothing is printed. Can you help me here pls? What steps should I take to add network printer in Mdk. Can mcc do it? I have samba installed, but I haven't touched the conf file. Pls help me to love linux more :) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:47:57 up 7:44, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] urpmi: command not found
On Friday 11 March 2005 12:02 pm, bascule wrote: have you checked your path? echo $PATH try the full path to urpmi /usr/sbin/urpmi glabels bascule On Friday 11 Mar 2005 03:47, joe wrote: [EMAIL PROTECTED] home]# urpmi glabels bash: urpmi: command not found Also try locate it by hand: locate urpmi You might need to run the updatedb command first. HTH, Fajar. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 13:10:15 up 16:06, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] KMail configuration
On Thursday 10 March 2005 03:47 am, Anne Wilson wrote: No - that wouldn't make sense. I'm using the same View for all the messages, and some show the iconised attachment while others show it in full, so it must be something in the composer setup, I guess. Anne Which message that has the signature as attachment? Maybe it's displayed different in my kmail 1.7.1 -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 09:57:54 up 1:09, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Installing Linux on extended partition (logical drive)
Hi all, For those of you who are interested in installing Linux on extended partition (or in MS terms we call it logical drive), I've successfully do it on installing Suse92 on hda10, where there is already MS Windows, and Mandrake. Here's the brief steps: 1. Install Windows (with 2 partitions in my case) 2. Install Mandrake on its own partition (with 5 partitions in my case, with 1 partition I call /data -- hda10) 3. Install Suse92 on /data. This is the caveat: -- choose LILO (you can use grub too, but I don't know yet the syntax), -- install LILO on the root partition of /hda10, -- format hda10 with any filesystem as long as Mandrake can read it. Suse will reboot once we finish the first installation step. 4. When rebooted, go into Mandrake. Modify /etc/lilo.conf with this: image=/data/boot/vmlinuz label=Suse92 root=/dev/hda10 initrd= /data/boot/initrd vga=788 read-only Modify the above lines that suits your environment. Run lilo -v to see if there's any error. If there isn't, you good to go. Reboot. You will see in the LILO menu that there's Suse92 entry. Choose it, and Voila! You've got Suse92! You dont even bother to create swap partition, Suse will use the swap from Mandrake. I've made an artikel about it in http://linux2.arinet.org (Indonesian) HTH. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 09:46:07 up 1:28, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Installing Linux on extended partition (logical drive)
On Wednesday 09 March 2005 11:22 am, Mikkel L. Ellertson wrote: other=/dev/hda10 lable=Suse92 When you pick this option, it will transfere control over to the new version of lilo. I tried it first, but lilo complained about 'no root partition found' The way you have it set up, if you update the kernel in Suse, you then have to boot Mandrake, update /etc/lilo.conf, and run lilo before you can boot the new kernel in Suse. Also, if you want to have more then one kernel in Suse, you will have to add the entries in the Mandrake copy of lilo.conf, and run lilo from Mandrake. Also, if you wipe out the boot partition in Mandrake, you will not be able to boot Suse from the hard drive. Ah interesting, no wonder when I update my Suse kernel with Yast Online Update, it gave me lots of error when rebooting about can't find /lib/modules.. Many thanks Mikkel :) I hope Mdk10.2 will be much better than Suse92. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 11:34:35 up 3:17, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] scribus users, pls help. pasting text longer than 1 page.
Hi all, I tried to make an article using Scribus. First I typed the article in text editor, then copy paste it in scribus. The article is kind of longer than 1 page, so the rest of the article isn't visible. The second page is blank. Can I make scribus to automatically put the rest of the article in the second page? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 11:38:15 up 3:20, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Beware, Firefox is a spyware :)
Not really surprising? :) http://www.techimage.net/files/antispyware.png -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 00:46:29 up 8:37, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] SpamAssassin startup
On Saturday 26 February 2005 11:06 pm, David Anderson wrote: Hi, I am following Derek Jennings' excellent Postfix mail server configuration document, and have got stuck in the SpamAssassin part. The doc says that you need to install the RPM, and then start the spamassassin service in Mandrake Control CentreSystemServices. Unfortunately there is no entry for SpamAssassin. . Can anyone give an incantation to get it there (or even visible in Webmin)? The RPM is SpamAssassin-3.0.2-0.1010.lmdk.i586.rpm. Regards David Did you successfully install Spamassassin? If so, you should be able to run it by: service spamassassin start -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 08:59:48 up 16:51, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Give spamassassin a chance?
On Friday 25 February 2005 10:33 pm, Tango Echo wrote: Have any of you successfully setup a spamassassin proxy on Mandrake for a medium sized network? I'm thinking of purchasing a barracuda device for spam filtering, but thought of giving OSS a chance 1st. But is it worth it, or will it require lots of time reading docs and configuring? I seem to be finding that OSS may only work in networks where the admin isn't low on free time since RTFM seems to be the mantra. Sure, the commercial packages are expensive, but you get what you need right away. Would a SA proxy be as simple as building a 10.1 box w/2 NICs, installing webmin and SA, then doing a quick config thru webmin? TIA Well, if you talk about a total newbie here, I mean in terms of setting up mail server, antivirus dan spamassassin, you'd better off with the commercial one. But, I have setup qmail+clamav+spamassassin and the performance in filtering out virus and spam is quite good. We even can train spamassassin to recognize spam using bayes probability, this is most effective. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 05:06:03 up 20:28, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Forget to change the windows manager
Hi all, Err... pls forgive me for asking this. After all these years I have been using KDE, but then my boss installed mdk10.1 on his notebook and he wanted Gnome... and then... I FORGOT how to change the default windows manager. How do I change it from KDE to Gnome? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 19:24:12 up 10:59, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] urpmi backups to disk?
On Thursday 24 February 2005 06:56 am, Aron Smith wrote: Use the --noclean switch. The rpms will be in /var/cache/urpmi/rpms. Oh boy, I wish I knew it before :( -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 07:01:32 up 7:26, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Does CUPS automatically detect network printer
Hi all, I'm trying to use CUPS through mcc. When it searched for network printer, it found nothing. I'm totally new with this CUPS thing. Could you give me some direction? Does CUPS automatically detect network printer, or is there some conf files I should edit? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 09:58:29 up 1:40, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Kmail has died!
On Thursday 24 February 2005 09:27 am, Chris wrote: This afternoon after I 'tried' to fwd a particularly large (2mb) file Kmail has refused to start new messages or to fwd them. The hourglass just continued to turn over an over and there is no response from Kmail until finally I get the (this application is not responding) popup. I've gone so far as to reboot to see if I could clear anything out of the system unfortunately it didn't work. Another odd thing is that when restarting Kmail even if I have it set to show long headers it wants to show full headers when restarted. Any help would be much appreciated at this time. Chris I'm not sure I can help you Chris. But last week, I couldnt add contact to the address book. It said that some process used it. So, I check the ~/.kde/ directory and delete some lock files. In your case, you might also want to clear the sent-folder? Or, you said you're using imap server? Maybe the server needs to be restarted. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 11:27:20 up 3:09, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] 10.1 boot stalling at checking for new hardware
On Friday 11 February 2005 07:11 pm, Rosemary McGillicuddy wrote: New install Mandrake 10.1 - after first boot got welcome to first boot window. Now boot justs stops at checking for new hardware. I waited five minutes - is this long enough? If not what can I do please? Thanks in advance Rosemary You can try by plugging out any external hardware that might be connected via usb, etc. And see what happens. Could be some really new hardware are confusing the program. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 20:47:47 up 12:10, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] installing mandrakelinux
On Friday 11 February 2005 05:11 pm, Gentoo Linux User wrote: AybOwan! can any body say the way v can install mandrake linux using a network cdrom/file system/iso (cd-rom connected to a remote computer in the same network). pls help me... Sure, just look into the /tools directory in the CD. There's a tool to make a boot floppy for network install. Setup the source in the remote pc using ftp or httpd, boot the pc you want to install, enter the ip number and the path of the installation cd on the remote pc... and done! -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 20:51:21 up 12:13, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3b
On Friday 31 December 2004 01:58 am, Pablo Ortuzar wrote: Hello, Perhaps this might help someone: I run Mandrake 10.1. Since I couldn't burn CDs with K3b, I removed K3b, cdrecord and mkisofs, did a urpmi update and then installed the latest version (k3b-0.11.17-0.1010. 1). I can now burn my CDs as usual. Hi Pablo, My problem with k3b was regarding burning multisession cd. I have no problem with single session cd. Anyway, I'm using xcdroast now, and am very happy with it. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 03:10:47 up 20:31, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] can k3b-11.17 do multisession? Moved TO XCDROAST
On Wednesday 29 December 2004 10:49 am, Fajar Priyanto wrote: On Wednesday 29 December 2004 10:41 am, Teddy Widhi wrote: Hi, I have use K3B version 0.11.9 thanks Teddy Well, it shows that upgrading to the latest version is not always a good idea. :( Finally I came across xcdroast and the multisession is working great. The interface and menu is a bit confusing at first, but I'll stick to it in the mean time. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 15:11:35 up 14:53, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Spurious 8259A interrupt: IRQ7
On Wednesday 29 December 2004 12:35 pm, Peter wrote: Hi Guys, Complete linux newbie here. I've just got past the installation of MDK 10.1 without too much trouble (on an AMD laptop, partition with WinXP), but my problems start when booting into linux. It just seems to hang with the message: spurious 8259A interrupt: IRQ7 Now from looking around the web, I've found some other reports of this error [1] One solution I found[2] was to add the following line to /etc/lilo.conf and rerun lilo. append = parport=0x378,7 I'd like to give this a go (hey, it might work for me), but am a bit lost as to how to go about it. Any help would be much appreciated. [1] http://jmz.iki.fi/blog.php/en/article/1057989236 [2] http://www.ussg.iu.edu/hypermail/linux/kernel/0201.3/0861.html Hi Peter, You can pass that line into kernel booting. When the boot loader screen shows up, press esc, and type that line. append = parport=0x378,7 Continue booting. Once inside linux, you can make that permanent in the /etc/lilo.conf then type lilo on the console to update the conf. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 21:19:10 up 21:01, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] firewall
On Thursday 30 December 2004 04:03 am, Dan Gordon wrote: On Thursday 30 December 2004 03:31 pm, neo wrote: could someone tell me a good firewall for mandrake 10.1 thank you For a basic setup which in my opinion is very good, install iptables and shorewall. This will get you started. I use iptables and firestarter which can be found here. www.fs-security.com/ The thing to keep in mind is, iptables is what makes the rules and shoewall or firestarter is just a front end to help you more easily create the rules. There are others on this list that are far more familiar with iptables and shorewall than I. Regards, Dan Gordon Yes shorewall is a good one. I appreciate Mandrake includes it. A little confusing at first, but once we read the tutorial, it's not that hard to setup. And Tom Eastep - the writer - is very active in the shorewall list. However, don't be offended by his sharp words though (especially when he knows we use mandrake) :) He's actually a very nice person, really :) His sharp words come because he's also a good writer on the documentation, so our problem regarding shorewall mostly has been covered in it. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 07:05:32 up 25 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3B problems
On Thursday 16 December 2004 04:52 am, Martin wrote: I installed gcombust and it works fine as does the Burn program but KB3, welll h On Wednesday 15 December 2004 22:43, Kenneth wrote: I had a rough time getting K3B to work with Mandrake 10.1. My problem was solved when I dropped back to an earlier version of K3B. I'm burning CD's on a Phillips USB R/W now with no problems other than I haven't been able to get it to work with rewritable CD's. The version I am running is K3B 0.11.13 under Mandrake 10.1CE with the 2.4 kernal. This is in response to the thread about such problems Sorry about changing the thread name - I switched mail servers and resubscribed. Has anyone tried k3b-0.11.18-4mdk ? I installed it from cooker and anxious whether the multisession error has been fixed. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 00:10:24 up 5:43, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] K3B problems
On Wednesday 29 December 2004 12:28 am, Mrugesh Karnik wrote: Has anyone tried k3b-0.11.18-4mdk ? I installed it from cooker and anxious whether the multisession error has been fixed. -- Hi, I just subscribed to this mailing list and haven't read the archives yet, so I don't know what's happened in the thread earlier, so please pardon me if I say something wrong. I've had problems with K3b. Lots of them and both on Mandrake 10.0 and SuSE 9.1 Pro. I simply did urpmi arson and installed Arson. Its very good. Try it out. Cheers Thanks Mrugesh, I installed arson. It looks good, but it seems that it only handles the creation-burning of iso files? Can I use it for multisession disk? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 06:58:26 up 6:40, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] can k3b-11.17 do multisession?
Hi folks, Can anyone confirm that k3b-11.17 is able to do multisession? Thanks -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 08:41:59 up 8:24, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] can k3b-11.17 do multisession?
On Wednesday 29 December 2004 08:47 am, Teddy Widhi wrote: Hi, K3B able do multisession, I use K3B that include with mandrake 10 PP and it can do multisession too. Thax Teddy Widhi Laksono Hi Teddy, Can you pls tell me the version? rpm -qa | grep k3b Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 08:55:00 up 8:37, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] can k3b-11.17 do multisession?
On Wednesday 29 December 2004 08:55 am, Fajar Priyanto wrote: On Wednesday 29 December 2004 08:47 am, Teddy Widhi wrote: Hi, K3B able do multisession, I use K3B that include with mandrake 10 PP and it can do multisession too. Thax Teddy Widhi Laksono Hi Teddy, Can you pls tell me the version? rpm -qa | grep k3b Thanks. This great.. another disc been rendered useless... I tried k3b-11.16 and k3b-11.17 for multisession.. The burn went ok, but the disc cannot be read, and when I tried to import the previous session, k3b crashed. I tried k3b-11.18 from the cooker but it won't start. After 'creating gui' it's just dissapeard. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 10:18:46 up 10:00, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] can k3b-11.17 do multisession?
On Wednesday 29 December 2004 10:41 am, Teddy Widhi wrote: Hi, I have use K3B version 0.11.9 thanks Teddy Well, it shows that upgrading to the latest version is not always a good idea. :( -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 10:48:39 up 10:30, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] installing new versions - keeping settings etc
On Monday 27 December 2004 04:58 pm, Anne Wilson wrote: On Monday 27 Dec 2004 09:52, Edward Holcroft wrote: So would this explain why when I upgraded to 10.1, I suddenly coudn't sync Kontact/KMail with my Palm although there was no problem syncing with Evolution? Also - if you do get this sorted with the help of the kde-pim list, please report back so that others know about it. Anne Hi Bill, I can share my experience oh this. I installed my mdk10.1 over 9.2 retaining /home . Everything went smoothly. When I run kmail, it instantly recognized the old mail directory. It asked me whether I want to use it and convert all the emails (yes, it changed the directory from /home/Mail to /home/.Mail CMIIW). I said yes.. and voila, I have all the setting from previous kmail. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 08:48:49 up 1 day, 10:12, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] mplayer not starting
Hi folks, I tried to run file rmvb, so I installed mplayer. But after it finished the installation, there's no icon in the Multimedia Video menu. I tried running mplayer from cli, but got this: mplayer MPlayer 1.0pre5try2-3.4.1 (C) 2000-2004 MPlayer Team CPU: Intel Pentium M Banias 1499 MHz (Family: 6, Stepping: 5) Detected cache-line size is 64 bytes CPUflags: MMX: 1 MMX2: 1 3DNow: 0 3DNow2: 0 SSE: 1 SSE2: 1 Compiled with runtime CPU detection - WARNING - this is not optimal! To get best performance, recompile MPlayer with --disable-runtime-cpudetection. Reading config file /etc/mplayer/mplayer.conf Reading config file /home/fajar/.mplayer/config Reading /home/fajar/.mplayer/codecs.conf: Can't open '/home/fajar/.mplayer/codecs.conf': No such file or directory Reading /etc/mplayer/codecs.conf: 73 audio 180 video codecs Usage: mplayer [options] [url|path/]filename Basic options: (complete list in the man page) -vo drv[:dev] select video output driver device ('-vo help' for a list) -ao drv[:dev] select audio output driver device ('-ao help' for a list) vcd://trackno play (S)VCD (Super Video CD) track (raw device, no mount) dvd://titleno play DVD title from device instead of plain file -alang/-slangselect DVD audio/subtitle language (by 2-char country code) -ss timeposseek to given (seconds or hh:mm:ss) position -nosound do not play sound -fs fullscreen playback (or -vm, -zoom, details in the man page) -x x -y yset display resolution (for use with -vm or -zoom) -sub file specify subtitle file to use (also see -subfps, -subdelay) -playlist file specify playlist file -vid x -aid yselect video (x) and audio (y) stream to play -fps x -srate y change video (x fps) and audio (y Hz) rate -pp qualityenable postprocessing filter (details in the man page) -framedrop enable frame dropping (for slow machines) Basic keys: (complete list in the man page, also check input.conf) - or - seek backward/forward 10 seconds up or down seek backward/forward 1 minute pgup or pgdown seek backward/forward 10 minutes orstep backward/forward in playlist p or SPACE pause movie (press any key to continue) q or ESC stop playing and quit program + or - adjust audio delay by +/- 0.1 second ocycle OSD mode: none / seekbar / seekbar + timer * or / increase or decrease PCM volume z or x adjust subtitle delay by +/- 0.1 second r or t adjust subtitle position up/down, also see -vf expand * * * SEE THE MAN PAGE FOR DETAILS, FURTHER (ADVANCED) OPTIONS AND KEYS * * * Pls help me? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 10:03:15 up 1:59, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] mplayer not starting
On Thursday 23 December 2004 11:29 am, JoeHill wrote: On Thu, 23 Dec 2004 10:06:37 +0700 Fajar Priyanto disseminated the following: * * * SEE THE MAN PAGE FOR DETAILS, FURTHER (ADVANCED) OPTIONS AND KEYS * * * 'mplayer filename' to play a file, or if you want a nice pretty GUI: 'urpmi mplayer-gui' Woah! Thanks Joe. I didn't know that package exits :) urpmi mplayer-gui ftp://ftp.easynet.fr/plf/mandrake/10.1/./i586/mplayer-gui-1.0-0.pre5.9plf.i586.rpm I can't wait to see the movie I've got (it's Japanese... if you know what I mean.. hehe) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 11:51:06 up 3:47, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] FYI - ssh security
On Tuesday 21 December 2004 11:58 am, RickSisler wrote: Hi all, Thought you might want to know about this post I saw on usenet comp.os.linux.security with the subject hacked? posted Sun Dec 19 Caspar Wrede wrote: Then I notice that there is a user logged on who usually is NEVER logged on. The user is daniel and his password, stupidly, is daniel. Suddenly, he's logged in twice from two different IP addresses: Here's a snippet from my logs. Note the 4th entry: Dec 10 07:21:29 frodo sshd[4940]: Illegal user jordan from Dec 10 07:22:02 frodo sshd[5019]: Illegal user brian from Dec 10 07:22:04 frodo sshd[5029]: Illegal user stephen from Dec 10 07:22:06 frodo sshd[5031]: Illegal user william from Dec 10 07:22:08 frodo sshd[5034]: Illegal user angel from Dec 10 07:22:10 frodo sshd[5044]: Illegal user emily from Dec 10 07:22:12 frodo sshd[5046]: Illegal user eric from Dec 10 07:22:13 frodo sshd[5048]: Illegal user joe from It happened while the victum was working on pc and noticed the cpu increase in gkrellm. So check your logs for something like this. And if you use passwords instead of ssh keys, then make sure your passwords are not simple to guess. Seems some user/password scans are checking for easy sshd logins HTH, after all the security talk here lately ... Yes, it has been happening in the last few months I think. The most usernames that are mostly used are: patrick, test, horde. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 15:45:39 up 56 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Mail server setup 9.2?
On Monday 20 December 2004 01:34 am, Eric Scott wrote: Okay, I tried this a while back with no success. Basically, I need a basic, step-by-step explanation of how to set up a sendmail server and courier-pop server on Mandrake 9.2, and how to add oodles of pop3 clients. I'm setting this up for a medium-large buisness, as they've had no success with their own Windows-based mail servers in front of their firewall ;-). Sendmail and Courier-IMAP-pop are installed and running. Thanx in advance, SigmaChi For a quick solution, I'd suggest this: http://www.qmailrocks.org/ -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 06:31:12 up 1 day, 9:54, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] win- linux
On Saturday 18 December 2004 08:50 pm, Ian wrote: I like the PCLinuxOS live Cd myself. Nice Mandrake feel to it...and it works wonderfully :-) Nicer than Knoppix for Mandrake users, I suppose. I stumbled on http://www.colinux.org It will run linux on windowez without special commercial vmware. Looks nice, but haven't tried it. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 02:33:08 up 10:39, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Change Pass in PostGreSQL
On Saturday 18 December 2004 01:12 pm, Eric Scott wrote: Heya; Webmin isn't changing my password on PostGreSQL accounts when I tell it to... hit the save button... the works. It's just not being chipper. Any help? I don't necessarily need Webmin how would I change a user's password in PostGreSQL manually on my Mandrake 9.2 Server? Thanx, ES Hi Eric, 1. edit /var/lib/pgsql/data/pg_hba.conf change/remark the connection authentification method, and add this line: local all all trust -- it won't ask you any password anymore 2. restart postgresql: service postgresql restart 3. su postgres 4. psql -U postgres -d template1 5. alter user nameofuser with password 'thepassword'; 6. \q -- to quit 7. exit 8. restore the pg_hba.conf back to the original setting. 9. restart posgresql 10. you're clear to go :) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 13:26:03 up 5:20, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] I found a way how to force Kmail to open Firefox properly
Hi folks, This is hilarious! Remember, my previous thread on why I couldn't make Kmail to launch Firefox properly because somehow the %U setting in Mozilla Firefox.desktop (Exec=soundwrapper /usr/bin/mozffremote %U) got dissapeared often. So, out of frustation, I chown: /home/me/.kde/share/applnk-mdk/Internet/Web Browsers/Mozilla Firefox.desktop file into 'root' And now, Kmail always launches Firefox properly :)) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 08:39:02 up 40 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] upgrade 9.2 to 10.1 using urpmi
I guess I'd better ask for help here too. On Thursday 16 December 2004 09:12 pm, Fajar Priyanto wrote: On Thursday 16 December 2004 08:08 pm, Fajar Priyanto wrote: Hi folks, Can I upgrade my mdk9.2 to 10.1 using urpmi? The reason is because I haven't got the time to do a clean install of it. Can I do it? I mean, at least to upgrade certain part of the package, for example: apache and it's modules to the latest package available. Or, can I just download the rpm from 10.1 and use rpm -Uvh on the 9.2? Thanks. Ugh, I found it in the archive. Ok, then my question is: should I update all the sources to 10.1 or via 10.0 first? Ok, I chose to go to 10.1 I urpmi urpmi, then: The following packages have to be removed for others to be upgraded: ImageMagick-5.5.7.13-3plf.i586 (due to missing ghostscript, due to missing libwmflite-0.2.so.7, due to missing libMagick-5.5.7.so.0, due to unsatisfied libMagick5.5.7 == 5.5.7.13-3plf) XFree86-75dpi-fonts-4.3-23mdk.i586 (due to unsatisfied XFree86 == 4.3) XFree86-server-4.3-23mdk.i586 (due to unsatisfied XFree86 == 4.3-23mdk) XFree86-xfs-4.3-23mdk.i586 (due to unsatisfied XFree86-libs == 4.3-23mdk) chkfontpath-1.9.10-1mdk.i586 (due to missing XFree86-xfs) fonts-ttf-decoratives-1.3-12mdk.noarch (due to unsatisfied chkfontpath = 1.4.1) fonts-ttf-vera-1.10-2mdk.noarch (due to missing chkfontpath[*]) fonts-ttf-west_european-1.3-12mdk.noarch (due to unsatisfied chkfontpath = 1.4.1) ghostscript-7.07-0.12.1.92mdk.i586 (due to unsatisfied urw-fonts = 1.1) libMagick5.5.7-5.5.7.13-3plf.i586 (due to missing libwmflite-0.2.so.7) libwmf-0.2.8-4mdk.i586 (due to missing libwmf-0.2.so.7, due to missing libwmflite-0.2.so.7) libwmf0.2_7-0.2.8-4mdk.i586 (due to missing urw-fonts, due to unsatisfied libwmf == 0.2.8-4mdk) php-imagick-4.3.3_0.9.7-3mdk.i586 (due to missing libwmflite-0.2.so.7, due to missing ImageMagick, due to missing libMagick-5.5.7.so.0) postgresql-python-7.3.4-2mdk.i586 (due to unsatisfied postgresql == 7.3.4-2mdk) urw-fonts-2.0-10mdk.noarch (due to missing chkfontpath[*]) (y/N) y I said Y, and then: To satisfy dependencies, the following packages are going to be installed (187 MB): MySQL-bench-4.0.20-3.1.101mdk.i586 MySQL-client-4.0.20-3.1.101mdk.i586 bootloader-utils-1.9-1.1.101mdk.i586 bootsplash-2.1.13-1mdk.i586 dmidecode-2.4-1mdk.i586 drakconf-10.1-2mdk.i586 drakfirsttime-1.1-15mdk.noarch drakxtools-10.1-27.1.101mdk.i586 drakxtools-backend-10.1-27.1.101mdk.i586 drakxtools-newt-10.1-27.1.101mdk.i586 glibc-2.3.3-21mdk.i586 glibc-devel-2.3.3-21mdk.i586 glibc-static-devel-2.3.3-21mdk.i586 gtk+2.0-2.4.9-9mdk.i586 gtkdialogs-2.1-1mdk.i586 gurpmi-4.5-28mdk.noarch harddrake-10.1-27.1.101mdk.i586 harddrake-ui-10.1-27.1.101mdk.i586 hwdb-clients-0.16-1mdk.noarch ldconfig-2.3.3-21mdk.i586 ldetect-lst-0.1.23-1.1.101mdk.i586 libbeecrypt6-3.1.0-3mdk.i586 libcurl3-7.12.1-1mdk.i586 libecpg3-7.4.5-4mdk.i586 libgdk_pixbuf2.0_0-2.4.9-9mdk.i586 libglib2.0_0-2.4.6-1mdk.i586 libgphoto-hotplug-2.1.4-3mdk.i586 libgphoto2-2.1.4-3mdk.i586 libgtk+-x11-2.0_0-2.4.9-9mdk.i586 libgtk+2.0_0-2.4.9-9mdk.i586 libidn11-0.5.4-1mdk.i586 libieee1284_3-0.2.8-1mdk.i586 libmysql12-4.0.20-3.1.101mdk.i586 libpango1.0_0-1.4.1-1mdk.i586 libpango1.0_0-modules-1.4.1-1mdk.i586 libpgtcl2-7.4.5-4mdk.i586 libpq3-7.4.5-4mdk.i586 libsane1-1.0.14-3mdk.i586 libstdc++6-3.4.1-4mdk.i586 libtiff3-3.6.1-4.1.101mdk.i586 libusb0.1_4-0.1.8-2mdk.i586 libvte4-0.11.11-3mdk.i586 libxorg-x11-6.7.0-4.2.101mdk.i586 locales-2.3.3-8mdk.i586 locales-en-2.3.3-8mdk.i586 mandrake-doc-common-10.1-1mdk.noarch mkinitrd-4.1.12-1mdk.i586 mod_perl-common-1.3.31_1.29-3mdk.i586 pango-1.4.1-1mdk.i586 perl-5.8.5-3.1.101mdk.i586 perl-Glib-1.054-1mdk.i586 perl-Gnome2-Vte-0.04-1mdk.i586 perl-Gtk2-1.054-1mdk.i586 perl-Gtk2-TrayIcon-0.04-1mdk.i586 perl-Libconf-0.33-2mdk.noarch perl-MDK-Common-1.1.18-1mdk.i586 perl-MIME-Lite-3.01-5mdk.noarch perl-MailTools-1.62-1mdk.noarch perl-Net-Jabber-1.30-1mdk.noarch perl-SOAP-Lite-0.60-0.a.2mdk.noarch perl-Term-ReadKey-2.21-4mdk.i586 perl-URPM-1.03-1mdk.i586 perl-XML-Stream-1.21-2mdk.noarch perl-base-5.8.5-3.1.101mdk.i586 perl-devel-5.8.5-3.1.101mdk.i586 perl-doc-5.8.5-3.1.101mdk.i586 perl-libwww-perl-5.800-1mdk.noarch popt-1.8.2-15mdk.i586 postgresql-7.4.5-4mdk.i586 postgresql-contrib-7.4.5-4mdk.i586 postgresql-devel-7.4.5-4mdk.i586 postgresql-jdbc-7.4.5-4mdk.i586 postgresql-pl-7.4.5-4mdk.i586 postgresql-server-7.4.5-4mdk.i586 postgresql-tcl-7.4.5-4mdk.i586 postgresql-test-7.4.5-4mdk.i586 rfbdrake-1.0-7mdk.noarch rpm-4.2.2-15mdk.i586 rpm-build-4.2.2-15mdk.i586 rpmdrake-2.1.5-13mdk.i586 sane-backends-1.0.14-3mdk.i586 sash-3.7-3mdk.i586 urpmi-4.5-28mdk.noarch userdrake-1.1-3mdk.i586 vte-0.11.11-3mdk.i586 xinitrc-2.4.11-1mdk.noarch xorg-x11-6.7.0-4.2.101mdk.i586 Is this OK? (Y/n) n Is this the correct thing to do? Is it safe if I answer yes? Thanks -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 22:24:28 up 1:20, Mandrakelinux release 10.1 (Official) for i586 public key
Re: [newbie] mdk Community vs. Official
On Wednesday 15 December 2004 12:42 pm, Josh Dean wrote: I've just put Mandrake Community 10.1 on my computer and realized Official was available. I hate to have something better available and not use it. Is it possible to upgrade to Official without having to reinstall Mandrake as Official instead of Community? This also brings up the question of their difference and what i'm gaining by switching to Official from Community. As you can see i'm quite the newb so bare with me. ~ Ayn Hi Josh, I'm not really sure either. But, I installed mdk10.1CE in my notebook. Added the online urpmi source fromn easy urpmi stating for CE version. Then did some urpmi.update --auto-select, then voila! I've got mdk10.1 official on the notebook. Now, everytime I use easyurpmi, I choose the official tree. Am I doing it wrong? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 16:48:32 up 36 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Thank you to all
On Wednesday 15 December 2004 04:31 pm, Aidan Holmes wrote: Greetings fellow Mandrake users. I'm writing this email to thank anyone who has ever helped solve another's problems on this list. Especially those members whose replys show that they are anything but a newbie. Surely their involvement in this list must be purely service to the Linux community, rather than for personal gain. I have been using Mandrake since 9.0 (I'm now on 10.1)and a good 95% of what I know about Linux has been learned from just watching this list, or asking the occasional question. I am using mandrake now at work and at home and it almost completely replaces Winblows. I very rarely have a problem I cannot solve now (probably testament to Mandrakes stability rather than my skill though). I can say without a doubt that had it not been for the newbie list I would still be using M$ Winblows today. THANKS GUYS AND GIRLS, GIVE YOURSELVES A PAT ON THE BACK. I look forward to the day I feel confident enough to help someone else out. I have the exact path as you do Aidan! :) Most of the time I was just lurking around in the list, and dive in occasionally when I think I can answer the question. This is one of the topic that I think I'd like to present in the Open Source Workshop/Conference that I'm going to attend in Bangalore-India, in January. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 16:52:18 up 40 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] mndk 10.1 official crash at startup
On Tuesday 14 December 2004 10:50 pm, Danesh Daroui wrote: Hi all, I have a print server with mndk 10.1 official. Sometimes when I restart the server before it shows the login page it crashes and the error message is: 0Kernel panic: Fatal exception in interrupt. In interrupt handler.-not syncing. I'm almost sure that it is a bug. Also, I have updated my system and it is full updated, but during updating it didn't update kernel. Well, maybe the kernel is already latest version. Had you this problem before ? Regards, Danesh Could be a defective Ram. Have you tried change them? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 06:37:48 up 12:14, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] mndk 10.1 official crash at startup
On Wednesday 15 December 2004 07:43 am, Danesh Daroui wrote: Fajar Priyanto wrote: On Tuesday 14 December 2004 10:50 pm, Danesh Daroui wrote: Hi all, I have a print server with mndk 10.1 official. Sometimes when I restart the server before it shows the login page it crashes and the error message is: 0Kernel panic: Fatal exception in interrupt. In interrupt handler.-not syncing. I'm almost sure that it is a bug. Also, I have updated my system and it is full updated, but during updating it didn't update kernel. Well, maybe the kernel is already latest version. Had you this problem before ? Regards, Danesh Could be a defective Ram. Have you tried change them? Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com Well, I don't know if there is any problem with RAM or not, but I don't think so. This system has worked for almost 6 months as server 24 hours with FC3 and Redhat Enterprise. Anyway how can I check the RAM ? You can check the RAM using a program called memtest (google for it). But it will take a lng time to finish. The fastest way I think is to borrow some RAM from other PC and put it into the troubled box to see whether the installation goes smoothly. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 13:56:02 up 5:42, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Secondary OS...
On Monday 13 December 2004 04:27 am, Vegard Lundby Rekaa wrote: Hi list, I want to install Debian Linux as a secondary OS. I have a clean seperate disk. Are there any manuals or todo explenations I could use? Running mdk 10.0 with lilo-bootloader. Regards Vegard I have a how to, but it's still in Indonesian. Anyway, the rule of thumb in doing dual boot: - separate the partition/disk - install ms windows first, linux last (otherwise winblowz will blow linux out) - if it's linux-linux, install the bootloader of the second os into root partition (don't mbr). For detailed step, you can search this list or google. HTH. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 05:34:16 up 9:30, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Radion 9200
On Sunday 12 December 2004 03:35 am, Kenneth Rhodes wrote: Greetings All, The local WalMart here in S.E. GA USA sells the Radion 9200 129mb for about $98 - does anyone know if this will run with Mandrake 10.1 with a 2.4 kernal? The Mandrake hardware compatibility database reports only that it will work with the 2.6 kernal. However, the ATI webpage says it will run with a 2.4 or greater kernal and they have a downloadable driver. Lastly, I have an old Matrox Millenium 2400 dual head with about 32mb ram. Works fine, but I was wondering if the Radion with the X4 the ram would be a bit snappier. I'm not really interested in gaming - just trying to spruce up my system a bit. Kenneth Rhodes 100% MicroSoft Free! My notebook is Acer Travelmate 800Lci with Radeon 9200. It works with mdk9.2 and now 10.1. I'm not sure it is the same as what you mean. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 07:33:47 up 11:45, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Create device at boot
On Friday 10 December 2004 09:53 pm, Peter Watson wrote: I need a device /dev/raw1394 to access my firewire video camera, but it does not exist After some research I have found that issuing the following command in a root terminal creates the device and that it works. mknod -m 666 /dev/raw1394 c 171 0 Now I would like the device to be created automatically on boot up so I have put the above command as the last line in /etc/rc.d/rc.local, unfortunately nothing happens ie the device is not created. anyone know how I can create /dev/raw1394 automatically TIA Maybe you can create an alias in bash environment instead? It's not automatically,. but saves you from typing the whole command. as root, put this in /root/.bashrc alias mycamera=mknod -m 666 /dev/raw1394 c 171 0 -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:31:02 up 38 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] VMWare question
On Monday 06 December 2004 10:43 am, Greg Meyer wrote: On Sunday 05 December 2004 09:37 pm, Jan Rubbrecht wrote: I am also kind of a newbie in Linux, but it seems to me that your cdrom is not correctly configured/working under Linux, might be worth checking that out if you're sure that VMWare should boot from CDrom first. I don't think VMWare boots from cdrom by default, go in the BIOS settings when you turn on your VM (usually by pressing F2) and put the CD on top of the list (usually by pressing +), save, exit, reboot. On my machines, vmware won't boot from cd unless I configure the drive with legacy emulation. Hi Greg, I've just found out that in Mdk10.1, I can boot my vmware. How do I set the drive into legacy mode? Thanks, -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 15:27:53 up 2:00, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] VMWare question
On Thursday 09 December 2004 09:14 pm, Greg Meyer wrote: On Thursday 09 December 2004 03:28 am, Fajar Priyanto wrote: On my machines, vmware won't boot from cd unless I configure the drive with legacy emulation. Hi Greg, I've just found out that in Mdk10.1, I can boot my vmware. How do I set the drive into legacy mode? From the virtual machine configuration screen while it is off, go into device cnfiguration for the cd and you should see a checkbox for legacy mode. Thankg Greg. I didn't think it's in the vmware configuration :) By the way, everytime I run vmware after a notebook reboot, it asks me to run vmware-config.pl again. So, I run it everytime. Strange.. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 08:52:32 up 1:15, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Download the rpm directly instead of urpmi
Hi folks, Can I download the rpm directly from Mdk's update repository and then install it manually instead of using urpmi? The reason is that I want to download the rpm through my colo server first (it has better speed), and then download it to my notebook (the speed should be much better, since it's in local internet exchange), and then install it. Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 20:22:22 up 3:43, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Download the rpm directly instead of urpmi
On Thursday 09 December 2004 03:48 am, John Layt wrote: I keep a local mirror of all the Mandrake / Club / PLF / etc RPMs on my USB2 drive, and have these defined as Local Sources in urpmi. While there are fancy sync tools to automate the process, I just fire up gftp every week or so and use its compare function to grab the latest updates. The advantage for me is that I maintain a number of Mandrake boxes for my family, and doing upgrades becomes a simple process of plugging teh drive into theri machine and updating their sources. John. Thanks folks, I've just got wake up (4.00 am now), and ready to install the bunch of RPMs that I've downloaded last night. About the gftp.. I didn't know that it has comparison ability. It's cool. I think I'll use it. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:18:52 up 11:40, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Mandrake 10.1
On Thursday 09 December 2004 12:13 am, Danesh Daroui wrote: 2. I tried to download Mandrake 10.1 Official from Mandrakesoft web site, but the it just forced to be a member in Mandrakeclub which costs. I have no problem to pay, but as I know Mandrakesoft used to strongly encourage users to be member not forced !!! Also, as it says, every year membership should be re-newed. Am I right ? If it is, why there are some unofficial sites which allows people to download ? No, we won;t be forced. Just click Get me to the download site. I plan to be a member later 3. Our server will be a Web-Server (Apache), Print and Database (MySQL) server with almost 150-250 hits per day and heavy traffic for print and Database manipulation on a high model system of course. Do you think mandrake can handle it or not ? FC3 could. If it is only for those servers, I suggest you not to install everything, especially xwindows. Don't you agree? Because I think the one that makes it hang all the time is xwindows related, well.. since the pc is an old one. Anyway, nobody's perfect, including mdk (or any other Os'es). But talking statistically, 99,99% of us here is satisfied with mdk, and we love it so much. You might be one of those 0,01% unlucky 'busted-hardware-related-problem' :) My real suggestion is: try install mdk on a decent machine, and you'll love it. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:52:52 up 8 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] OT: Bravo Mandrake Lists!
Hi folks, Finally I've got my confirmation that I'm invited to attend the Asia Source workshop/conference on Open Source Software in Bangalore-India 27/1-4/2 2005. I plan to make/get involved in discussion about 'building open source awareness in schools and it's community' during the event. The mandrake lists are definitely an example of the power of open source community as I've been witnessing for these 2 years. Bravo! For more info on Asia Source: http://www.tacticaltech.org/asiasource -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 05:13:38 up 1:09, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Win 2000 install.
On Saturday 04 December 2004 10:59 pm, Kaj Haulrich wrote: No. - I tried just that (WinXP) with ZoneAlarm active on my daughters PC. After downloading SP2 from Microsoft her box was severely compromized once again. In short : No Windows box should never - ever - be allowed on any network. Kaj Haulrich. I notice that if a WXP is pathced using SP2, it can't be pinged from network. Well, so much for the effort :) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 05:50:48 up 1:55, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] VMWare question
On Friday 03 December 2004 06:20 pm, Paul Kaplan wrote: Lastly, I always thought my w2k cd was bootable, but I only ever tried to install in VMWare where it didn't boot. Since it wouldn't boot in VMWare, I ended up installing w98 and then upgrading to w2k completely overwriting the w98 installation. You could probably also upgrade from w95 or even 3.1 if you can read the CD. It has been working (as well as windows can) for 15 months. I suppose it's possible there's a bug in VMWare. I'm not sure about w2k prof, but i can install wxp and w2k server using bootable cd in vmware. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 05:53:06 up 1:58, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Trouble installing
On Sunday 05 December 2004 07:29 am, Aron Smith wrote: I have tried to install 10.1 on my 32 box using the power pack download and also with the Linux Format MDK 10.1 cds on a graphical install after hitting enter the screen blanks on a text install i get the message --crc error--- system halted. any ideas? TIA smitty I think, it's almost certain you've got a defected discs. CMIIW. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 10:26:13 up 6:31, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Mission impossible - almost
Oh man! I'm so stressed :( Must install a new program (Linux, apache, php, postgres) to 47 schools in just 5 days in January. I have 5 team members including me, means 10 schools in 1 day? Oh boy... -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 15:52:41 up 7:43, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Mission impossible - almost
Thanks Stephen, you're very kind :) Well, I think later I should start looking for another career somewhere else. The reason why the installation cannot start right away, because many important parameter in the system is still in the decision-process making by the bosses. I'm so pissed off, because they have the time and should make all those decisions months ago. Remember last year, I got hepatitis? It was because the bossess made a decision to develop a new system in just one month! Why oh why they knew that sooner or later we must make a new system because of staff change, but they delayed the decision until the last moment. On Thursday 02 December 2004 04:31 pm, Stephen Kühn wrote: On Thu, 2004-12-02 at 19:55, Fajar Priyanto wrote: Oh man! I'm so stressed :( Must install a new program (Linux, apache, php, postgres) to 47 schools in just 5 days in January. I have 5 team members including me, means 10 schools in 1 day? Oh boy... I'm for hire. -- stephen kuhn mobile: 0410-728-389 illawarra and regional new south wales --- GNU/Linux/OpenSource Solutions and Alternatives 100% Microsoft Free - Reboot is NOT an option. Registered Linux User # 267497 --- There are hardly any excesses of the most crazed psychopath that cannot easily be duplicated by a normal kindly family man who just comes in to work every day and has a job to do. (Small Gods) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 17:01:31 up 8:52, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Kmail error msg
On Thursday 02 December 2004 05:35 pm, John Bowden wrote: Hi list Installed mdk 10.1 last weekend. Took 2 attempts to get Kmail to collect my email, though that was more down to blueyonder not accepting my password than Kmail. I ended up del the account that was not working and starting afresh with the wizard thingy. Any way its collecting mail ok but when I start Kmail up it gives me a pop up window wih this error msg KDEInit could not launch 'kontact-kmail.sh'. Any ideas any one? is it critical? Regards I have the same error message. Other than that, Kmail and friends work fine. I try Anne's advice to xhost +localhost, but no avail. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 22:34:51 up 30 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] xmms acting up.
On Saturday 19 June 2004 03:06 pm, Frans Ketelaars wrote: You have to install the xmms-arts rpm. HTH, -Frans Thanks too, Frans. I have xmms troubled in 10.1, and after I install xmms-arts it's working fine now :) -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 23:41:42 up 1:37, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] xscreensaver
On Friday 03 December 2004 05:36 am, Peter Watson wrote: My screensavers in KDE don't work! All the screensaver executables are there in /usr/X116R/lib/xscreensaver/ and if I click on one it runs fine in a window. However when a screensaver is supposed to start by itself I just get a blank screen. If I run xscreensaver-demo from a terminal it tells me that the xscreensaver daemon is not running and asks if i want to start it, if I say yes then the mandrake slide show screensaver works fine but none of the others work. Next time I boot up the xscreesaver daemon is not started and nothing works. Grateful for advice on how to start xscreensaver daemon at boot and/or how to get the other screensavers working. By the way, in Gnome everything works perfectly, the xscreensaver daemon runs automatically and all the screensavers work. The only thing is I can't work out how to change the time before a screensaver comes on, I don't feel comfortable with Gnome and would like to get this working in KDE if possible But is it possible that xscreensaver only works with Gnome? TIA I have the same problem. If I choose slide show, it works, But then I chose another, and now screensaver stops working. :( -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 06:22:15 up 8:18, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] How is doing this? Firefox won't be default browser
Hi all, This is really got me into my nerve. I've made Firefox 1.0 as my default browser using KDE menu File Association txt html, and use %U in the application command so that it can open url correctly from Kmail. But, every time I run Firefox, it always asks whether it wanted to be default browser, I answer Yes everytime. The problem occurs when somehow I open Konqueror to browse local file, etc... This WILL BROKE the %U option, thus Firefox won't open url from Kmail correctly. Can I make the %U permanent? Does KDE refuse to let us kill it's konqueror as default browser? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 10:21:05 up 2:26, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Failure message during the boot of Mdk 10.1 CE
On Wednesday 01 December 2004 06:58 pm, Rodolfo Medina wrote: I recently created a new partition on my HD in which I installed Mdk 10.1 Community. Every time, during the boot I read the following message: Mounting other filesystems: mount: none already mounted or dev/pts busy [FAILED] . What does it mean? Does it express a problem, and what? Thanks, Rodolfo I have that too. I don't know what happens. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 20:32:06 up 42 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] How to use stow with .tar.gz
On Monday 29 November 2004 03:01 am, Vegard Lundby Rekaa wrote: I have installed stow to help me install packages, in this case pingpong-ABC bittorrent client. I have tried google and the man pages, but I can't find any description I understand. Here's the first lines of the man pages: NAME stow - software package installation manager SYNOPSIS stow [options] package... What kind of file is a package wich the man pages referes to? Man stow Usually package manager software works by remembering what the 'makefiles' does in normal tar.gz compiling. And build the rpm from the tar.gz I'm not sure about stow. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 03:32:53 up 7:52, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] Firefox default browser doesn't stick
Hi folks, I've modified the /home/.kde/share/applnk-mdk/Internet/Web browsers/Mozilla firefox.desktop. The line: exec= soundwrapper /usr/bin/mozzffremote %U But, after sometimes, it will change back to: exec= soundwrapper /usr/bin/mozzffremote (without the %U). Is there somekind of system restore that makes this? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 15:37:45 up 5:51, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] kmail cannot forward attachment
Oh no, I've just found out that my Kmail 1.7.1 cannot forward attachment. I mean when I forward some emails, the attachment isn't included. Is there something wrong? Thanks -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 17:36:15 up 16 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] kmail cannot forward attachment (SOLVED)
On Friday 26 November 2004 05:37 pm, Fajar Priyanto wrote: Oh no, I've just found out that my Kmail 1.7.1 cannot forward attachment. I mean when I forward some emails, the attachment isn't included. Is there something wrong? Thanks It's a bug :( http://www.archivum.info/[EMAIL PROTECTED]/2004-11/msg00550.html -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 18:14:56 up 54 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Apache not starting?
On Saturday 27 November 2004 03:06 am, Peter Davis wrote: I'm running 10.0, but Apache seems to be having a problem starting. When I try to browse to localhost, I just get a Google search page. Even using 127.0.0.1 doesn't work. The system log says: Syntax error on line 56 of /etc/httpd/2.0/conf/commonnhttpd.conf: Invalid command 'lfModule', perhaps mis-spelled or defined by a module not included in the server configuration The module in question is mod_access.c I'm pretty certain this used to work when I first installed the system, so possibly something I've done since has broken it. I haven't messed with Apache at all, but I tried to install UW IMAP, and later Courier IMAP. Hi Peter, I think the easiest way is to uninstall apache and re-install it again. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 04:36:43 up 8:16, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Help requested getting Apache virtual servers going
On Tuesday 23 November 2004 01:10 pm, Todd Slater wrote: On Mon, Nov 22, 2004 at 11:17:32PM -0500, Bill Mudry wrote: Could someone help me find out why I cannot get some virtual hosts going on Apache. Bill, How about letting us know what happens when you try to access a virtual host (in the browser)? Any errors in /var/log/httpd/access_log or error_log? Todd Yes, also did you register the domain name in your local dns? Because you're using .com which is a real domain. Depends on your local dns, it will forward the query to the internet if it's not set as local. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 18:00:02 up 40 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Need help passing params while starting my pc
On Tuesday 23 November 2004 07:03 pm, Vegard Lundby Rekaa wrote: In www.mandrakeexpert.com I got this hint to fix a problem I am experiencing. Try to pass this params while starting your pc : linux noapic nolapic I am new tp this, and was hoping someone could describe to my in detail what I am supposed to do and when? Best regards , Vegard IIRC, If you use Lilo, then when the boot selection screen start, press [esc], then a prompt will show. then you type those command. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 20:00:25 up 2:41, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
[newbie] btdownloadcurses syntax error
Hi folks, I'm trying to run btdownloadcurses.py with this, but errored: btdownloadcurses.py --max_upload_rate 5 Ragnarok-The-Animation.torrent These errors occurred during execution: [21:46:39] error: Too many args - 0 max. run with no args for parameter explanations What is the correct syntax to use? Thanks. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 20:52:25 up 5 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Interview with X.org honcho
On Sunday 21 November 2004 11:48 am, JoeHill wrote: besides, that only means that I have to learn X ALL OVER AGAIN - and install new NVidia drivers...dang dang dang dang dang... The only new things you are likely to have to learn is how to enjoy all the whoop-ass new features, matey. It'll be like havin' a free Mac, 'cept you can change just more than how the GUI *looks*. I read this: Earlier this year, a license change in the defacto X project, XFree86, forced developers to look elsewhere for graphical support. Anybody knows what it means? What license change? Have you read this? In Singapore Steve Ballmer threathened Asian goverment officials of using Linux. http://www.technewsworld.com/story/news/38302.html Is this the sign of last-gasp effort from MS or is there some truths behind it? What do you think? -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 18:21:39 up 1:16, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] what can I do ?? Please help - Urgent
On Sunday 21 November 2004 07:34 pm, Paul Kaplan wrote: can you install mc (midnight commander)? F4 puts you in edit mode, F2 is save. P Or, you can still use vi, for basic file editing, here's the keys (remeber that you'll need to be root to work on /etc/files): - to start editing file: vi somefile - once inside, to modify it press: i - to save the modification, press: [esc] :w - to quit, press: [esc] q! - to save the modification and then quit, press: [esc] :wq You'd notice that when you press [esc] the blinking cursor will move into the lower right of your screen, and when you press :w, etc, it will show there. HTH, -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 19:54:03 up 2:48, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] rpm doanload
On Monday 22 November 2004 12:00 am, Habib Seifzadeh wrote: Hi all, Why there are only iso images in download pages of mandrake? Is there any way to download rpms? Of course, they may be found in rpmfind.net but first speed of this site is low and second, it hasn't complete list of eache CD rpms. Hi Habib, ISO file is the image file for burning into CD. So, when 'burned', it will be extracted into all the individual files like you want it. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 01:01:52 up 2:16, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com
Re: [newbie] Looking for Mr. 'Boot-Guru
On Saturday 20 November 2004 08:31 am, Lanman wrote: Stephen Kühn wrote: On Sat, 2004-11-20 at 11:52, Lanman wrote: Never let it be said that I don't bring interesting problems to the list! This time, the problem makes no sense, unless someone has written a boot-sector virus and included it on the Mandrake 10.1 Community CD's. I'm tempted to replace the m/board in case that's the problem. I'm wondering if it might be the IDE controller or something. It might also explain the drive (CRC errors) I had on the other drive. Hardware problems are always specific and difficult to solve by others. But one thing I'm sure that it isn't because of boot sector virus. Also, the best approach in solving hardware problems is to localized the problem. Is it the harddisk? Mobo? Memory? The CD? Looks like you're having a hard time, Lanman. Try to take 5, drinking coffee, reading some jokes, sleep, etc. I have my share of burnout too, especially when it was 3am, the energy level was very low, thus I accidentally wiped out all my data in the ntfs partitions when setting up a dual boot (which I've done this many times before). Goodluck. -- Fajar Priyanto | Reg'd Linux User #327841 | http://linux2.arinet.org 20:24:36 up 47 min, Mandrakelinux release 10.1 (Official) for i586 public key: https://www.arinet.org/fajar-pub.key Want to buy your Pack or Services from MandrakeSoft? Go to http://www.mandrakestore.com Join the Club : http://www.mandrakeclub.com