Re: Creating RedHat CD
On Tue, 2002-02-19 at 21:31, ext Rui Barreiros wrote: Hi there, I'm trying to build a custom redhat cd, so i customize the comps file, and run a self made perlscript to check dependencies and it creates a dir with all needed rpm's (usually they're about 190 mb). There are also another rpms that are needed to be present in that dir to buildinstall to run perfect, like anaconda*.rpm and kernel*.rpm Xconfigurator etc. after i run the genhdlist, buildinstall (2 or 3 errors that i think irrelevant for the problem itself) i burn the iso image and the cd doesn't boot. all the steps are described below: mkdir mycd mkdir mycd/RedHat mkdir mycd/RedHat/base mkdir mycd/RedHat/RPMS edit comps file, original from redhat 7.2 (it's only the base system and some server packages not more, thus no X, gnome kde and all that superfluos packages for a very basic gateway) run my perl script (it checks all the packages in comps file, checks dependencies, and populates mycd/RedHat/RPMS with all necessary RPM's) copy the files needed for buildinstall kernel-* anaconda-* Xconfigurator... and gtk+... genhdlist --with-numbers mycd/ generate the package order PYTHONPATH=/usr/lib/anaconda pkgorder mycd i386 filelist generate the hdlist with the correct order genhdlist --withnumbers --fileorder ./filelist mycd run buildinstall buildinstall mycd/ (outputs only 2 or 3 errors about creating and removig a dir in mycd/RedHat/instimage/usr/X11R6/something/about/fonts, anyway this is not the problem) make the iso mkisofs -V test cd -r -J -T -b images/boot.img -c boot.cat -o mycd.iso mycd/ after booting the cd, it just appears the prompt like: booting from CD: and it never boots. am i missing something?! is there an error on what i'm doing?! Dunno if this is directly related to your problem but I think you should be using the '-l' option to mkisofs to allow long filenames. Other than that it looks basically the same as I'm using. Have you checked that you can boot off the boot.img floppy? Another question is, is there any documentation on tweaking anaconda?! There isn't much documentation about anaconda :( I suggest you join [EMAIL PROTECTED] and check out it's archives. There was also quite a lot of anaconda-related discussions a couple of months ago on kickstart-list. like removing som screens and setting the expected values from them manually or adding screens, now i'm poking around the source, but i'ts not very intuitive or well commented to understand it easily (no python guru too, but learning). It's nowhere near as bad as it seems at first sight (but yes, it's BIG :) I successfully added some options to it (fs creation kickstart), added some defaults etc without having programmed a single line of python before, after staring the source for some time and a lot of trial and error... I didn't try adding screens but it involves adding handlers for your stuff in dispatch.py installSteps -list and setSteps() in installclass.py is used to set what steps are to be run, the actual order seems to be defined in dispatch. - Panu - ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-devel-list
Mondo (GPL bare metal recovery cloning tool)
Howdy, Dunno, about yours, but finding Mondo site certaily made my day. Great stuff for Linux. IMHO, it's well worth checking what's happening at project Mondo http://www.microwerks.net/~hugo/ This is almost too good to be true, and if anybody you out there ever administered HP-UX and know what Ignite-UX is good for, you would almost kill to get that for Linux too ;) Those of you who haven't had opportunity to experience HP-UX features of host cloning, /dev/vg00 system backups and disaster recovery preparation procedure (simple as make_recovery -A -v with Ignite-UX) on DAT tape, the Mondo and goal seems to be the same but burning bootable recovery CD-R/DVD-R/tape/nfs etc. ie. the support of backup media is wider than with Ignite-UX. I bet, once the word spreads out, it will soon one of the most used backup, recovery and installation tool ever. I can't really imagine that any of the major distributors, including Red Hat, just can't afford leaving it out from a distro. The way it's usually is that once you try Ignite-UX with HP-UX you will rarely after that even consider installing from scratch, unless absolutely necessary (ie. new HW or new model you have to install and once prepare a bootable tape with Ignite-UX, after that you just boot from tape and customize or let it automagically build your already prepared environment) just great, and after while you think how did we ever manage without it! :-) riku ps. Sorry about, being a bit flashy, but this kind of tool is definitely a killerapp for sysadmins, and I would like guys at Red Hat not to sleep over it. pps.Well, if I could make a wish it would be that LVM gets standard feature and with a HP MC/ServiceGuard for Linux port would encourage HP to port more apps, like Online Diagnostics etc :) -- [ This .signature intentionally left blank ] ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-devel-list
Re: Mondo (GPL bare metal recovery cloning tool)
On Wed, 20 Feb 2002, Riku Meskanen wrote: Howdy, Dunno, about yours, but finding Mondo site certaily made my day. Great stuff for Linux. Okay, one smartass replied to me and stated that Your adds are not welcome here.. Obviously my posting was _way_too_flashy_ :( I'm sorry about that, think whatever you like from me or my postings, but please check Mondo http://www.microwerks.net/~hugo/ it's darn well worth having a proper look. :-) riku -- [ This .signature intentionally left blank ] ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-devel-list
Re: Mondo (GPL bare metal recovery cloning tool)
Okay, one smartass replied to me and stated that Your adds are not welcome here.. Obviously my posting was _way_too_flashy_ :( He's not worth a piece of doggy-do; don't worry about him. You might post the original to enigma-list if you haven't and send a copy to Bero too for good measure. He may well put it on the rescue CD (if it fits). -- Cheers John Summerfield Microsoft's most solid OS: http://www.geocities.com/rcwoolley/ Note: mail delivered to me is deemed to be intended for me, for my disposition. ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-devel-list
firewire/dv/avi/mpeg tools in rawhide?
Hi - I was just wondering if Red Hat was planning on including RPMs necessary for digital video authoring in Rawhide anytime soon... these are packages like libraw1394, libavc1394, dvgrab, avifile, mjpegtools... I got my 7.2 system up and running with all this stuff, but I found that none of the RPMs were available from Red Hat - are all these packages still too much in their infancy, or might they hit rawhide sometime soon? Thanks, -Eric ___ Redhat-devel-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-devel-list
RE: Upgrading openssh with dependencies:
David, Where did you find the rpm of openssl096-0.9.6-6 as I can't locate it anywhere seems to be removed from the redhat site? M -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Eddie Strohmier wrote: I believe that libcrypto.so.1 is in the krb5 packages. Grab the krb5-devel, krb5-lib, and krb5-server packages and install them and that should satisfy the libcrypto.so.1 atlantis:dtalk 501 $ ls -al /usr/lib/libcrypto.so.1 lrwxrwxrwx1 root root 18 Oct 27 20:04 /usr/lib/libcrypto.so.1 - libcrypto.so.0.9.6 atlantis:dtalk 502 $ rpm -qf /usr/lib/libcrypto.so.0.9.6 openssl096-0.9.6-6 - -d - -- David Talkington PGP key: http://www.prairienet.org/~dtalk/0xCA4C11AD.pgp - -- http://setiathome.ssl.berkeley.edu/pale_blue_dot.html -BEGIN PGP SIGNATURE- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75-6 iQA/AwUBPHNQUr9BpdPKTBGtEQK3/ACglKglZfqWOWXn7U48qHMQeZ3zLXoAn0wf WTgFwCgBKE5pcQmUCXnQ/wDW =3TWc -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re[2]: Please help ! Anyone can teach me how to set IP Forwarding in RH 7.2 ?
Hello Kevin, Wednesday, February 20, 2002, 3:06:37 AM, you textually orated: KC Dear Jack and all, KC Jack, I was tried to config the sysctl.conf and reboot the machine after. KC But the problem still the same - is client side can't browse Intereting KC when I assign a KC different range of IP (10.0.0.1) to them (p.s. Server IP Address is KC 192.168.13.222). If I change the IP (192.168.13.223) for client, they KC haven't any problem at all. So I think there is something need to do on IP KC forwarding. KC Do you know what I can do to solve this problem ? Also,below is what I KC change from my server: Assuming this is your network topology... Internet(0.0.0.0) | Server-External Interface(xxx.xxx.xxx.xxx) | Server-Internal Interface(192.168.13.222) | | Client A(192.168.13.xxx) | | Client B(10.10.10.xxx) In this scenario, Client B will NOT be able to connect to the server. It is not on the same network (it is physically, but not in networking terms). Client A will be able to connect. You need to add another IP address to the server (it can be virtual) to allow this to happen or you need to change the server's internal interface to be on the same network. No tricks will allow you to bypass this fundamental networking principle. Have fun, -- _ Brian Ashe CTO [EMAIL PROTECTED] Dee-Web Software Services, LLC. http://www.dee-web.com/ - ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Re[2]: Please help ! Anyone can teach me how to set IP Forwarding in RH 7.2 ?
Hello Brain, First, thanks for your reply. My network topology as below (Only one client): Internet(0.0.0.0) | Server-External Interface(xxx.xxx.xxx.xxx) | Server-Internal Interface(192.168.13.222) | Client A(10.0.0.1) I know it will work because I am still using it with RH 7.0 (Not RH 7.2). After I install a new ppp server on RH 7.2 , the problem was exist so that I think there is a way to do it on RH 7.2 . Thanks and regards, Kevin Chan Brian Ashe Wrote: Hello Kevin, Wednesday, February 20, 2002, 3:06:37 AM, you textually orated: KC Dear Jack and all, KC Jack, I was tried to config the sysctl.conf and reboot the machine after. KC But the problem still the same - is client side can't browse Intereting KC when I assign a KC different range of IP (10.0.0.1) to them (p.s. Server IP Address is KC 192.168.13.222). If I change the IP (192.168.13.223) for client, they KC haven't any problem at all. So I think there is something need to do on IP KC forwarding. KC Do you know what I can do to solve this problem ? Also,below is what I KC change from my server: Assuming this is your network topology... Internet(0.0.0.0) | Server-External Interface(xxx.xxx.xxx.xxx) | Server-Internal Interface(192.168.13.222) | | Client A(192.168.13.xxx) | | Client B(10.10.10.xxx) In this scenario, Client B will NOT be able to connect to the server. It is not on the same network (it is physically, but not in networking terms). Client A will be able to connect. You need to add another IP address to the server (it can be virtual) to allow this to happen or you need to change the server's internal interface to be on the same network. No tricks will allow you to bypass this fundamental networking principle. Have fun, ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Autorun
Hi, For my user account, a daemon call 'Autorun' is running for a while at the boot. It doesn't appears for the root account. It seems to be linked with the automount tool (?) or something like that. Can someone give me more detail about this daemon ? Allmost, why does it run for user and not for root ? How can I fix the settings to have a similar behavior, as well as root as user ? Thx, ism ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: sendmail or imap server recieving mails?
not sure which version of sendmail that u r using... as the latest sendmail only listen to local, u may try to check yrs sendmail.mc file whether it is being disabled if not u have to do so and recompile yrs sendmail.cf... it shd look like below: dnl DAEMON_OPTIONS(`Port=smtp,Addr=127.0.0.1, Name=MTA') if u check thr previous email posted by Rodolfo regarding SMTP AUTH Micro-HOWTO v2, there is a steps on compiling sendmail.cf in fact, sendmail is the one to do mail relaying... imap is just an interface to access mail box... This is what i know hope it will help... rdgs, gary - Original Message - From: Wesley Jay Deypalan [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Sunday, February 17, 2002 3:56 PM Subject: Re: sendmail or imap server recieving mails? Hi, I can telnet my mail server using telnet xxx.www.zzz.aaa 25 and my smtp sendmail server will respond properly, problem is i cannot recieve emails. what program will configure to recieve mails sendmail or imap? TIA Wesley Jay From: David Talkington [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: Re: sendmail or imap server recieving mails? Date: Sat, 16 Feb 2002 19:23:11 -0800 (PST) -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Wesley Jay Deypalan wrote: Just a clarification, I configure our mail server using sendmail and imap2000, I use the rpm package to install sendmail and imap2000, I can already send mails but cannot recieve any mails, the error messages states that it cannot locate our domain. I got no such error: Prairienet:dtalk 300 $ dnsip mail.mydomain.com 216.148.221.139 But this times out: Prairienet:dtalk 301 $ telnet mail.mydomain.com 25 Trying 216.148.221.139... ^C Is there a firewall in the way? - -d - -- David Talkington PGP key: http://www.prairienet.org/~dtalk/0xCA4C11AD.pgp - -- http://setiathome.ssl.berkeley.edu/pale_blue_dot.html -BEGIN PGP SIGNATURE- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75-6 iQA/AwUBPG8iJL9BpdPKTBGtEQJMIwCg/RYt6eejyIPgvu2WjaSxM6CC1PYAoMnF JVkY9OQoPGMM33+IxnVCO8EJ =FDpJ -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list _ Get your FREE download of MSN Explorer at http://explorer.msn.com/intl.asp. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
[OT] Subnets and Classes
Just something that's always evaded my comprehension. I always use the 192.168.0.0 - 192.168.255.255 range for internal networks. Usually the first 9 reserved for servers (.1-.10) and the rest clients. From all the documentation I've read this is a Class B network (16 bit), and to use it I should netmask 255.255.0.0. I was at a customer's the other day who uses the 192.168.1.x range. I put a pre-prepared Linux box (RH7.2 if it matters) down there, with my usual 192.168.0.1 ip set-up, but the clients just would not connect to it. Not even ping it. The client's netmask WAS set to 255.255.0.0, so my question is this: Can a client at let's say 192.168.1.x with netmask 255.255.0.0 connect to a server at 192.168.0.1 with netmask 255.255.0.0? I've never pondered this before because as I said, I normally use the 192.168.0 range only, but in this case, I had to change the server to 192.168.1 range to make it work, when, from what I understand, I shouldn't have had to. In the end it's all good and works, but why not with the 192.168.0 range? I realise it's a different sub-net, but the mask should take care of that no? Can anyone please kindly refer me somewhere that explains in plain English what I'm misunderstanding? TIA -- Edward Dekkers (Director) Triple D Computer Services Pty. Ltd. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: [OT] Subnets and Classes
To give you an exact answer I must know your network topology, but as a general answer: You must add the corresponding entry to your router's routing table (and to your host PC if the default route destination is not the router in question). Good Luck. From: Edward Dekkers [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED] Subject: [OT] Subnets and Classes Date: Wed, 20 Feb 2002 17:41:54 +0800 Just something that's always evaded my comprehension. I always use the 192.168.0.0 - 192.168.255.255 range for internal networks. Usually the first 9 reserved for servers (.1-.10) and the rest clients. From all the documentation I've read this is a Class B network (16 bit), and to use it I should netmask 255.255.0.0. I was at a customer's the other day who uses the 192.168.1.x range. I put a pre-prepared Linux box (RH7.2 if it matters) down there, with my usual 192.168.0.1 ip set-up, but the clients just would not connect to it. Not even ping it. The client's netmask WAS set to 255.255.0.0, so my question is this: Can a client at let's say 192.168.1.x with netmask 255.255.0.0 connect to a server at 192.168.0.1 with netmask 255.255.0.0? I've never pondered this before because as I said, I normally use the 192.168.0 range only, but in this case, I had to change the server to 192.168.1 range to make it work, when, from what I understand, I shouldn't have had to. In the end it's all good and works, but why not with the 192.168.0 range? I realise it's a different sub-net, but the mask should take care of that no? Can anyone please kindly refer me somewhere that explains in plain English what I'm misunderstanding? TIA -- Edward Dekkers (Director) Triple D Computer Services Pty. Ltd. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list _ Join the worlds largest e-mail service with MSN Hotmail. http://www.hotmail.com ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: [OT] Subnets and Classes
**Disclaimer - all self-tought** Simple answer, you should have been fine having a server on 192.168.0.1/16 and a client on 192.168.1.1/16. (/16 is another way of writing 255.255.0.0) When sending an IP packet, the sender compares it's IP and netmask with the IP and netmask of the receiver, and if the results match then it tries to talk direct. If they don't match then it uses it's routing tables to find out who to go through, and repeats the same process. Comparing IP/masks is a simple logic AND operation. 192.168.0.1 255.255.0.0 = 192.168.0.0 192.168.1.1 255.255.0.0 = 192.168.0.0 = match and should talk fine Using a class 'C' mask would give 192.168.0.1 255.255.255.0 = 192.168.0.0 192.168.1.1 255.255.255.0 = 192.168.1.0 = no-match needs routing There is no *magic* about class 'A' 'B' or 'C' netmasks, other than they split at byte-bounderies ( an typically that they have defined IP address ranges). There is nothing wrong with using the 192.168. Class B range as multiple class 'C'. Here we use the class 'A' private range 10. as multiple class 'B' subnets, one per physical site to aid routing and reduce the broadcasts that travel down the WAN lines. The netmask is purely a way of describing the number of bits - starting at the left - that signify how much of the IP address is network and how much is node. 128.0.0.0 = /1 = 1000... 255.0.0.0 = /8 = ... (Class A mask) 255.255.0.0 = /16 = ... (Class B mask) Hope this helps Gary On Wednesday 20 February 2002 9:41 am, Edward Dekkers wrote: Just something that's always evaded my comprehension. I always use the 192.168.0.0 - 192.168.255.255 range for internal networks. Usually the first 9 reserved for servers (.1-.10) and the rest clients. From all the documentation I've read this is a Class B network (16 bit), and to use it I should netmask 255.255.0.0. I was at a customer's the other day who uses the 192.168.1.x range. I put a pre-prepared Linux box (RH7.2 if it matters) down there, with my usual 192.168.0.1 ip set-up, but the clients just would not connect to it. Not even ping it. The client's netmask WAS set to 255.255.0.0, so my question is this: Can a client at let's say 192.168.1.x with netmask 255.255.0.0 connect to a server at 192.168.0.1 with netmask 255.255.0.0? I've never pondered this before because as I said, I normally use the 192.168.0 range only, but in this case, I had to change the server to 192.168.1 range to make it work, when, from what I understand, I shouldn't have had to. In the end it's all good and works, but why not with the 192.168.0 range? I realise it's a different sub-net, but the mask should take care of that no? Can anyone please kindly refer me somewhere that explains in plain English what I'm misunderstanding? TIA -- Gary Stainburn This email does not contain private or confidential material as it may be snooped on by interested government parties for unknown and undisclosed purposes - Regulation of Investigatory Powers Act, 2000 ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: more cd burning questions
On Tue, Feb 19, 2002 at 09:31:12AM -0800, Brandon Dorman wrote: I ran lilo, no errors reported. In a cd writing howtow i saw once it said to turn off generica ide cdrom support but I never found that exact wording so didn't touch anything. The closest thing I saw I think was like, turn off ide support and I didn't think I wanted to do that, because if ide was turned off how could it even attempt to emulate scsi? Right, you definitely don't want to turn off IDE support. Not only would it prevent your CD-ROMs from working, but your floppy and hdd wouldn't work either. :) (Unless they happen to be SCSI.) Ben -- Ben Logan: ben at wblogan dot net OpenPGP Key KeyID: A1ADD1F0 Paranoid schizophrenics outnumber their enemies at least two to one. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Newbie - Creating a Cron Job
Hi all, In the process of making things up as I go along again. I have created a logrotate file on the direction of another person to back up my databases on MySQL. Now I understand that this needs to be called from Cron for it to work. Having had a browse around I see there is a reference to logrotate in the cron.daily folder, do I need to add anything extra to ensure that the file I have added is executed? For the purpose of testing what extra could I add to run the process at short intervals to check it is working? TIA Alex
Re: [OT] Subnets and Classes
Hello Edward, Wednesday, February 20, 2002, 4:41:54 AM, you textually orated: ED Just something that's always evaded my comprehension. ED I always use the 192.168.0.0 - 192.168.255.255 range for internal networks. ED Usually the first 9 reserved for servers (.1-.10) and the rest clients. From ED all the documentation I've read this is a Class B network (16 bit), and to ED use it I should netmask 255.255.0.0. Any documentation that states this is a class B network is wrong. It is a class C. Here is the breakdown... Class Netmask Network Addresses A 255.0.0.0 0.0.0.0- 127.255.255.255 B 255.255.0.0 128.0.0.0 - 191.255.255.255 C 255.255.255.0 192.0.0.0 - 223.255.255.255 These are the defaults. ED I was at a customer's the other day who uses the 192.168.1.x range. I put a ED pre-prepared Linux box (RH7.2 if it matters) down there, with my usual ED 192.168.0.1 ip set-up, but the clients just would not connect to it. Not ED even ping it. The client's netmask WAS set to 255.255.0.0, so my question is ED this: ED Can a client at let's say 192.168.1.x with netmask 255.255.0.0 connect to a ED server at 192.168.0.1 with netmask 255.255.0.0? Yes. But there is usually an extra step to override the defaults. ED I've never pondered this before because as I said, I normally use the ED 192.168.0 range only, but in this case, I had to change the server to ED 192.168.1 range to make it work, when, from what I understand, I shouldn't ED have had to. In the end it's all good and works, but why not with the ED 192.168.0 range? I realise it's a different sub-net, but the mask should ED take care of that no? I believe that you need to change the default network boundaries to get it to route properly. Something like... route add -net 192.168.0.0 netmask 255.255.0.0 eth0 It may also be required to have ip-fowarding enabled as well. Have fun, -- _ Brian Ashe CTO [EMAIL PROTECTED] Dee-Web Software Services, LLC. http://www.dee-web.com/ - ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: [OT] Subnets and Classes
It seems I got the problem wrong, Sorry From: Gary Stainburn [EMAIL PROTECTED] Reply-To: [EMAIL PROTECTED] To: [EMAIL PROTECTED], Edward Dekkers [EMAIL PROTECTED] Subject: Re: [OT] Subnets and Classes Date: Wed, 20 Feb 2002 10:14:23 + **Disclaimer - all self-tought** Simple answer, you should have been fine having a server on 192.168.0.1/16 and a client on 192.168.1.1/16. (/16 is another way of writing 255.255.0.0) When sending an IP packet, the sender compares it's IP and netmask with the IP and netmask of the receiver, and if the results match then it tries to talk direct. If they don't match then it uses it's routing tables to find out who to go through, and repeats the same process. Comparing IP/masks is a simple logic AND operation. 192.168.0.1 255.255.0.0 = 192.168.0.0 192.168.1.1 255.255.0.0 = 192.168.0.0 = match and should talk fine Using a class 'C' mask would give 192.168.0.1 255.255.255.0 = 192.168.0.0 192.168.1.1 255.255.255.0 = 192.168.1.0 = no-match needs routing There is no *magic* about class 'A' 'B' or 'C' netmasks, other than they split at byte-bounderies ( an typically that they have defined IP address ranges). There is nothing wrong with using the 192.168. Class B range as multiple class 'C'. Here we use the class 'A' private range 10. as multiple class 'B' subnets, one per physical site to aid routing and reduce the broadcasts that travel down the WAN lines. The netmask is purely a way of describing the number of bits - starting at the left - that signify how much of the IP address is network and how much is node. 128.0.0.0 = /1 = 1000... 255.0.0.0 = /8 = ... (Class A mask) 255.255.0.0 = /16 = ... (Class B mask) Hope this helps Gary On Wednesday 20 February 2002 9:41 am, Edward Dekkers wrote: Just something that's always evaded my comprehension. I always use the 192.168.0.0 - 192.168.255.255 range for internal networks. Usually the first 9 reserved for servers (.1-.10) and the rest clients. From all the documentation I've read this is a Class B network (16 bit), and to use it I should netmask 255.255.0.0. I was at a customer's the other day who uses the 192.168.1.x range. I put a pre-prepared Linux box (RH7.2 if it matters) down there, with my usual 192.168.0.1 ip set-up, but the clients just would not connect to it. Not even ping it. The client's netmask WAS set to 255.255.0.0, so my question is this: Can a client at let's say 192.168.1.x with netmask 255.255.0.0 connect to a server at 192.168.0.1 with netmask 255.255.0.0? I've never pondered this before because as I said, I normally use the 192.168.0 range only, but in this case, I had to change the server to 192.168.1 range to make it work, when, from what I understand, I shouldn't have had to. In the end it's all good and works, but why not with the 192.168.0 range? I realise it's a different sub-net, but the mask should take care of that no? Can anyone please kindly refer me somewhere that explains in plain English what I'm misunderstanding? TIA -- Gary Stainburn This email does not contain private or confidential material as it may be snooped on by interested government parties for unknown and undisclosed purposes - Regulation of Investigatory Powers Act, 2000 ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list _ Send and receive Hotmail on your mobile device: http://mobile.msn.com ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Startup Application
On Tue, Feb 19, 2002 at 08:22:46PM -0500, James Pifer wrote: Where is the autostart folder? I can't find one. I'm logging in as root, should it be under /root? Do I just create it? Not sure about your questions since I don't run KDE, but I'm curious: are you logging in as root all the time, or just for administrative tasks? If you are running as root all the time... You may know this already, so please forgive me if you do, but doing everyday tasks as root is very dangerous. Not only can you accidentally run/do something you didn't mean to and screw up your entire system, but you also open your system up to trojans (more common) and viruses (less common) to a much greater degree than if you run things as a normal user. Access restrictions are one of the great things about *nix IMHO, but taking the name root in vain totally circumvents them. Regards, Ben -- Ben Logan: ben at wblogan dot net OpenPGP Key KeyID: A1ADD1F0 On a normal ascii line, the only safe condition to detect is a 'BREAK' - everything else having been assigned functions by Gnu EMACS. (By Tarl Neustaedter) ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: RH Linux 7.1/Oracle 9i Book
Hello. I have installed 9i on Suse 7.2 and RedHat 7.1 without any problem. Using universal installer, the process is like install a window program. I think if you are not using Linux/Unix before, some books is required. If you are using suse (it is using by oracle to develop 9i), keep in mind that all(?) the linux books are using redhat as sample. The directory structure and config files of suse is not the same as redhat. At 04:59 PM 02/02/19 -0500, you wrote: We are an NT/2000 shop running Oracle Applications 11.5.3 on 8.1.7.2.1. All the DBA's here have cut their teeth on Oracle on NT/2000. Recently, we have committed to going with the Oracle 9i RAC configuration on Red Hat Linux (7.1 I think). With all this in mind, does anyone have any suggestions on some great Linux/Red Hat/Oracle on Linux books that could help us out? We're talking everything from Linux sysadmin to Oracle/Linux DBA. Any suggestions and personal experiences would be greatly appreciated. Thanks, Chuck ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list Best Regards, Almond Wong Tel:91836223
Firewalling Samba
Hello Eveyone, Can I setup a firewall so that a client can connect to a service on a remote PC, but the firewall can't ? Here is my layout : 10.1.1. (External NICs) -[FW]- 192.168.0. (LAN 1) (Internal NICs) 192.168.1. (LAN 2) etc Now I want the clients on 192.168.x. to connect to Windows NT Servers sitting on 10.1.1.x, but my FW mustn't be able to connect. The box is running Samba, and thus I don't want it to show in the Windows NT Servers Thanks, Pieter ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Reverse MASQ
Hello Everyone, What ipchains command can I use to allow a client to connect to a server in my DMZ Internet -[FW]- LAN (192.168.0) | DMZ (10.1.1.) My firewall will have an IP Address alloc. to it, say 172.16.1.1 and 172.16.1.2 (on the external nic), now I would like everyting that connects to 172.16.1.2 to be firewalled/MASQ to 10.1.1.2 ? Thanks, Pieter De Wit ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
broken link at redhat/download
i know it's the right milis, but i don't know where i must report for broken links. there is a broken link in postfix-20011125-1SASL.i386_dl.html when i try to search in www.redhat.com/download the right link: http://www.redhat.com/swr/i386/postfix-20011125-1SASL.i386_dl.html -- ichtus -- Lewi Supranata .K ICQ: 50643061 msg72357/pgp0.pgp Description: PGP signature
Re: Newbie - Creating a Cron Job
On Wed, Feb 20, 2002 at 10:39:43AM -, Alexander Shaw wrote: Having had a browse around I see there is a reference to logrotate in the cron.daily folder, do I need to add anything extra to ensure that the file I have added is executed? For the purpose of testing what extra could I add to run the process at short intervals to check it is working? I believe all you need to do is to create a shell script in that folder which calls: logrotate /path/to/your/file/logrotate.conf There's a /etc/cron.hourly which you can use for testing. The times these are called at are in /etc/crontab . Emmanuel ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: urgent scp help...
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 * and then David Talkington declared Reuben D Budiardja wrote: I assume you want to know the scp command for transferring a directory? scp -r directory user@machine_name:. You probably want this instead (assuming you're downloading and not uploading): scp -r [EMAIL PROTECTED]:~/dirname dirname Note the tilde, which will grab stuff relative to your home directory. Yep. Thanks everyone! Your timely help was much appreciated. - -- - --- www.explodingnet.com |Projects, Forums and +Articles for website owners - -- Nick Wilson -- |and designers. -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) iD8DBQE8c5iCHpvrrTa6L5oRAmsaAJ9LGVR5ijd153Rumc+y7G+Ev8J6twCbBCMG 2k8hhiU/Idkq7ctxucYeoeI= =ppcR -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Firewalling Samba
At 13:17 2/20/2002 +0200, Pieter De Wit wrote: Can I setup a firewall so that a client can connect to a service on a remote PC, but the firewall can't ? Assuming ipchains, the rule might look like this: firewall=10.0.0.1 ipchains --append input --protocol tcp --source $firewall \ --destination sambabox.mydomain 137:139 --jump REJECT ipchains --append input --protocol udp --source $firewall \ --destination sambabox.mydomain 137:139 --jump REJECT ipchains --append output --protocol tcp --destination $firewall \ --source sambabox.mydomain 137:139 --jump REJECT ipchains --append output --protocol udp --destination $firewall \ --source sambabox.mydomain 137:139 --jump REJECT Tony -- Anthony E. Greene [EMAIL PROTECTED] PGP Key: 0x6C94239D AOL/Yahoo Chat: TonyG05 Linux. the choice of a GNU generation. http://www.linux.org/ ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
test
test
Cluster and diskless pc
Hi, I'd like to create a cluster for parallel computing using RH72. My idea is a setup like the following: *1 Full PC (hd 60GB and eth 100Mb/s) *8 Diskless PCs (no hd and eth 100Mb/s connected by an hub 3COM 12*100Mb/s) Some times ago I found a tutorial to configure OS on the full pc to manage the cluster but I cannot find it anymore (I don't remember on which site). Can you suggest me good documentation that can help me? What do you think about a Beowulf cluster using PVM? And about Mosix? Other suggestions? TIA Massimo Alonzo ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RE:Newbie - Creating a Cron Job
Alexander == Alexander Shaw [EMAIL PROTECTED] writes: Hi all, In the process of making things up as I go along again. I have created a logrotate file on the direction of another person to back up my databases on MySQL. Now I understand that this needs to be called from Cron for it to work. Having had a browse around I see there is a reference to logrotate in the cron.daily folder, do I need to add anything extra to ensure that the file I have added is executed? For the purpose of testing what extra could I add to run the process at short intervals to check it is working? Alex, You will want to look at /etc/logrotate.conf and /etc/logrotate.d/mysqld. If you installed MySQL properly, there may be an /etc/logrotate.d/mysqld file existing. This is what it looks like on my system: /var/log/mysqld.log { missingok create 0640 mysql mysql prerotate [ -e /var/lock/subsys/mysqld ] /usr/bin/mysqladmin flush-logs || /bin/true endscript postrotate [ -e /var/lock/subsys/mysqld ] /usr/bin/mysqladmin flush-logs || /bin/true endscript } You will also want to look at the logrotate --force command in the manpage for logrotate. Regards, Gregg ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RE: RH Linux 7.1/Oracle 9i Book
Does Red Hat have any documentation specifically relating to Oracle on 7.1. We're implementing the 9i RAC on 7.1 -courtesy of Dell- and need a little help in the transition to the Linux world from Microsoft. Thanks, Chuck Speaks Database Administrator Lithonia Lighting 770-860-3450 http://www.lithonia.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 19, 2002 17:46 To: [EMAIL PROTECTED] Subject: Re: RH Linux 7.1/Oracle 9i Book [EMAIL PROTECTED] (Hendrick Chan) writes: Try this link on www.suse.com: http://www.suse.de/en/support/oracle/sles.html Oracle 9i is certified on RHL 7.1. No need to go elsewhere. -- Trond Eivind Glomsrød Red Hat, Inc. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: test
Do you realize how lame it is to send a test message out to how many thousand of users? Do you realize what a waste of resources that is? At 07:47 AM 2/20/2002 -0500, you wrote: test ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RE: RH Linux 7.1/Oracle 9i Book
This response was meant to be a private email. Please ignore and sorry for the clutter. Chuck Speaks Database Administrator Lithonia Lighting 770-860-3450 http://www.lithonia.com -Original Message- From: Speaks, Chuck W. [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 20, 2002 09:08 To: '[EMAIL PROTECTED]' Subject: RE: RH Linux 7.1/Oracle 9i Book Does Red Hat have any documentation specifically relating to Oracle on 7.1. We're implementing the 9i RAC on 7.1 -courtesy of Dell- and need a little help in the transition to the Linux world from Microsoft. Thanks, Chuck Speaks Database Administrator Lithonia Lighting 770-860-3450 http://www.lithonia.com -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 19, 2002 17:46 To: [EMAIL PROTECTED] Subject: Re: RH Linux 7.1/Oracle 9i Book [EMAIL PROTECTED] (Hendrick Chan) writes: Try this link on www.suse.com: http://www.suse.de/en/support/oracle/sles.html Oracle 9i is certified on RHL 7.1. No need to go elsewhere. -- Trond Eivind Glomsrød Red Hat, Inc. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RE: test
and your response is any better because...? -Original Message- From: Clifford Thurber [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 20, 2002 9:09 AM To: [EMAIL PROTECTED] Subject: Re: test Do you realize how lame it is to send a test message out to how many thousand of users? Do you realize what a waste of resources that is? At 07:47 AM 2/20/2002 -0500, you wrote: test ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
is there any script/program to strip out the attachment from the mail?
Is there any script/program to strip out the attachment from the mail? thanks a lot. Peter ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Startup Application
Ben, Thanks. I have taken your advice and I am not using root for my login. Moving Evolution was a pain, but hopefully done now. This does lead me to a question. When you're doing things on your system where you need to get to files etc, is it just standard practice to su to root to get more permissions, etc? I was also able to find the autostart under .kde. Thanks to all who helped on this. James On Wed, 2002-02-20 at 05:42, Ben Logan wrote: On Tue, Feb 19, 2002 at 08:22:46PM -0500, James Pifer wrote: Where is the autostart folder? I can't find one. I'm logging in as root, should it be under /root? Do I just create it? Not sure about your questions since I don't run KDE, but I'm curious: are you logging in as root all the time, or just for administrative tasks? If you are running as root all the time... You may know this already, so please forgive me if you do, but doing everyday tasks as root is very dangerous. Not only can you accidentally run/do something you didn't mean to and screw up your entire system, but you also open your system up to trojans (more common) and viruses (less common) to a much greater degree than if you run things as a normal user. Access restrictions are one of the great things about *nix IMHO, but taking the name root in vain totally circumvents them. Regards, Ben -- Ben Logan: ben at wblogan dot net OpenPGP Key KeyID: A1ADD1F0 On a normal ascii line, the only safe condition to detect is a 'BREAK' - everything else having been assigned functions by Gnu EMACS. (By Tarl Neustaedter) ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: delete queued mails
No need. They will go away on their own after 5 days. Not quite forever. Otherwise, shutdown sendmail and delete offending file(s) from queue directory. I believe there are two or three files for each mailq entry. Each one of set only has minor differences in obscure filename. Compare output of 'mailq' with what you see in queue directory. Frank At 09:03 AM 2/20/02 +0800, Roger wrote: Hi guys In my box, there is a queued mail, it seems that it can't be sent out forever, because the host name of the destination lookup failure. Please tell me how to delete this mail! Thank you in advance! ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RE: Upgrading openssh with dependencies:
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Matthew Simpson wrote: Where did you find the rpm of openssl096-0.9.6-6 as I can't locate it anywhere seems to be removed from the redhat site? I didn't; I just spit out what rpm told me. Just grab all the openssl-related packages, and it'll be fine. Really. ;-) - -d - -- David Talkington PGP key: http://www.prairienet.org/~dtalk/0xCA4C11AD.pgp - -- http://setiathome.ssl.berkeley.edu/pale_blue_dot.html -BEGIN PGP SIGNATURE- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75-6 iQA/AwUBPHPHSL9BpdPKTBGtEQKVGwCfUCqYTBOKI2/gK5ThpkCCYavhbIkAniPF AVHTnXRo8GWGtXBt31iChvkd =ejoA -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Please help ! Anyone can teach me how to set IP Forwarding in RH 7.2 ?
Eddie Strohmier [EMAIL PROTECTED] writes: I use netcfg under console but never tried within X. Not sure why but just open a terminal window and place the echo 1 /proc/sys/net/ipv4/ip_forward in your rc.local Don't. Edit /etc/sysctl.conf instead. -- Trond Eivind Glomsrød Red Hat, Inc. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
g++ question: where is limits?
I'm going through Strostrup's C++ book, and say a refence to limits, which should contain, among other things, numeric_limits. I can't find this on my RH 7.0 system. Any hints? Thanks. --- David Kramer http://thekramers.net DK KD DKK D Imagine an alternate history where William S. Burroughs was DK KD actually interested in mainframe hardware design. Bob Bruhin ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
system performance monitoring
Some of you may be familiar with Blair Zajac's ORCA (http://www.orcaware.com/orca/), which works wonderfully with Adrian Cocroft's SE performance toolkit for solaris. I'm wondering if anyone is aware of a similair solution for redhat. Specifically I'm looking for something that gif-ifies system utilization, broken out by CPU/mem/net, etc. I'm aware of things like GKRELLM, but it does not archive results. Any ideas? -- Matthew Boeckman(816) 777-2160 Manager - Systems Integration Saepio Technologies == == The secret to how our government controls information is easily expl*** **MESSAGE TRUNCATED** ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Startup Application
At 10:25 2/20/2002 -0500, James Pifer wrote: When you're doing things on your system where you need to get to files etc, is it just standard practice to su to root to get more permissions, etc? Yes. I have an icon on my panel that lauches with the following command: xterm -e su - root That makes it easy for me to open a root sheel at any time. Since I normally use gnome-terminal with white text on a black background, the xterm (black text on white background) stands out and reminds me that it's a root shell. Tony -- Anthony E. Greene [EMAIL PROTECTED] PGP Key: 0x6C94239D AOL/Yahoo Chat: TonyG05 Linux. the choice of a GNU generation. http://www.linux.org/ ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
:RE: system performance monitoring
Personally I'm pretty happy with Big Brother found at http://bb4.com I've found their solution is simple to implement and supports multiple platforms (UNIX and Windoze). History is available for any system. It may/may not be what you are looking for. Something to look at. Frank Some of you may be familiar with Blair Zajac's ORCA ( http://www.orcaware.com/orca/ ), which works wonderfully with Adrian Cocroft's SE performance toolkit for solaris. I'm wondering if anyone is aware of a similair solution for redhat. Specifically I'm looking for something that gif-ifies system utilization, broken out by CPU/mem/net, etc. I'm aware of things like GKRELLM, but it does not archive results. Any ideas? -- Matthew Boeckman(816) 777-2160 Manager - Systems IntegrationSaepio Technologies == == The secret to how our government controls information is easily expl*** **MESSAGE TRUNCATED** ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: is there any script/program to strip out the attachment from the mail?
li == [EMAIL PROTECTED] writes: li Is there any script/program to strip out the attachment from the mail? How about metamail? Ed -- Ed BaileyRed Hat, Inc. http://www.redhat.com/ ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
openssh redhat 6.2
what is the best way to do this.? is there packages availible to install or do one have to compile from scratch. if so, where can i find docs on this. Thanks. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Upgrading openssh with dependencies:
Matthew == Matthew Simpson [EMAIL PROTECTED] writes: Matthew Hi David, What about libcrypto.so.1 is needed by openssh-2.5.2p2-5 [ed@pigdog ed]$ rpm -q --whatprovides libcrypto.so.1 openssl096-0.9.6-6 Ed -- Ed BaileyRed Hat, Inc. http://www.redhat.com/ ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
I interface Redhat 7.1 to a 4.11 Netware server. I tried the command you list and it worked just fine for me. I don't really see a problem with your ncpmount command. The only other thing I can think of is that I configured the ipx interface differently. I didn't have to do ipx_configure --auto_interface=on --auto_primary=on In fact when I've tried that before I've had trouble getting it working. In my /etc/rc.d/rc.local script file I insert the following lines: /sbin/ipx_interface delall /sbin/ipx_interface add -p eth0 802.2 We happen to be using 802.2. You can substitute ETHERNETII or whatever your fame type happens to be. After I do that everything works. I am puzzled that you can see the server with slist. It seems like if you were having a fundamental problem where the interface wasn't setup correctly then you wouldn't be able to see the server at all. On Tue, 2002-02-19 at 12:55, James Pifer wrote: I'm trying to use ncpmount to connect to a Netware server. I've followed the howto and have done this: #ipx_configure --auto_interface=on --auto_primary=on I can then do: #slist servername and it returns the servername with the correct IPX address, etc. When I try to issue the ncpmount command I can't login. I'm trying: #ncpmount -S servername -V volume /share/sys -C -U username -P password I keep getting ncpmount: Invalid password (-669) in nds login Login denied. -I have the server in /etc/hosts in case it matters -I've tried two different logins and I know the passwords are correct. -I've tried with and without -C, which I don't think would make a difference here anyway -I've tried just the username, as well as distinguished, such as username.context -I've tried without -P so it prompts for username. Can anyone help out? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: broken link at redhat/download
Lewi == Lewi [EMAIL PROTECTED] writes: Lewi i know it's the right milis, but i don't know where i must report for Lewi broken links. there is a broken link in Lewi postfix-20011125-1SASL.i386_dl.html when i try to search in Lewi www.redhat.com/download Lewi the right link: Lewi http://www.redhat.com/swr/i386/postfix-20011125-1SASL.i386_dl.html I've sent it to our web team. Thanks for noticing this! Ed -- Ed BaileyRed Hat, Inc. http://www.redhat.com/ ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Startup Application
On Wed, Feb 20, 2002 at 10:25:20AM -0500, James Pifer wrote: When you're doing things on your system where you need to get to files etc, is it just standard practice to su to root to get more permissions, etc? The normal practise is to install and use sudo - this should be included on your Red Hat Linux CD although I can't remember if it's installed by default. You can then grant specific users access to specific functions, or you can allow a user the ability to create a root shell with sudo -s. -- Ed Wilts, Mounds View, MN, USA mailto:[EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: system performance monitoring
On Wed, Feb 20, 2002 at 10:16:12AM -0600, Matthew Boeckman wrote: Specifically I'm looking for something that gif-ifies system utilization, broken out by CPU/mem/net, etc. I'm aware of things like GKRELLM, but it does not archive results. Any ideas? We use MRTG. http://people.ee.ethz.ch/~oetiker/webtools/mrtg/ Here's a somewhat typical web page showing the output from mrtg. I grabbed this page off of the links above just to give you an idea of what can be done using mrtg: http://mrtg.yeehaw.net/ -- Ed Wilts, Mounds View, MN, USA mailto:[EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: How to set IP Forwarding in RH 7.2 ?
On Wed, Feb 20, 2002 at 12:53:32PM +0800, Kevin Chan wrote: : I would like to know where I can set the IP Forwarding in RH 7.2 and why I : can't use the netcfg under Xwindow ? Crack open an xterm, use the text editor of your choice to modify /etc/sysctl.conf. -- Jason Costomiris| Technologist, geek, human. jcostom {at} jasons {dot} org | http://www.jasons.org/ Quidquid latine dictum sit, altum viditur. My account, My opinions. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: openssh redhat 6.2
On Wed, Feb 20, 2002 at 09:28:59AM -0800, Steve Lee wrote: what is the best way to do this.? Get the source rpm from openbsd.org (use the mirrors). Install it, edit the spec file to disable RH7-pam-use and build the rpm. Install, activate, enjoy. Emmanuel ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
I used the commands and I get the same results. I can do an slist and see the server, but get and invalid nd login when I try to use ncpmount.Can you send me an example of your ncpmount command? I even tried a user on netware that has no password and used the -n option. It still says 'Invalid password (-669) nds login' Thanks, James On Wed, 2002-02-20 at 12:32, Carl D. Blake wrote: I interface Redhat 7.1 to a 4.11 Netware server. I tried the command you list and it worked just fine for me. I don't really see a problem with your ncpmount command. The only other thing I can think of is that I configured the ipx interface differently. I didn't have to do ipx_configure --auto_interface=on --auto_primary=on In fact when I've tried that before I've had trouble getting it working. In my /etc/rc.d/rc.local script file I insert the following lines: /sbin/ipx_interface delall /sbin/ipx_interface add -p eth0 802.2 We happen to be using 802.2. You can substitute ETHERNETII or whatever your fame type happens to be. After I do that everything works. I am puzzled that you can see the server with slist. It seems like if you were having a fundamental problem where the interface wasn't setup correctly then you wouldn't be able to see the server at all. On Tue, 2002-02-19 at 12:55, James Pifer wrote: I'm trying to use ncpmount to connect to a Netware server. I've followed the howto and have done this: #ipx_configure --auto_interface=on --auto_primary=on I can then do: #slist servername and it returns the servername with the correct IPX address, etc. When I try to issue the ncpmount command I can't login. I'm trying: #ncpmount -S servername -V volume /share/sys -C -U username -P password I keep getting ncpmount: Invalid password (-669) in nds login Login denied. -I have the server in /etc/hosts in case it matters -I've tried two different logins and I know the passwords are correct. -I've tried with and without -C, which I don't think would make a difference here anyway -I've tried just the username, as well as distinguished, such as username.context -I've tried without -P so it prompts for username. Can anyone help out? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
This could be silly but, is connection attempted to NDS or to the bindery? Francisco [EMAIL PROTECTED] 20/02/02 13:23 I used the commands and I get the same results. I can do an slist and see the server, but get and invalid nd login when I try to use ncpmount.Can you send me an example of your ncpmount command? I even tried a user on netware that has no password and used the -n option. It still says 'Invalid password (-669) nds login' Thanks, James On Wed, 2002-02-20 at 12:32, Carl D. Blake wrote: I interface Redhat 7.1 to a 4.11 Netware server. I tried the command you list and it worked just fine for me. I don't really see a problem with your ncpmount command. The only other thing I can think of is that I configured the ipx interface differently. I didn't have to do ipx_configure --auto_interface=on --auto_primary=on In fact when I've tried that before I've had trouble getting it working. In my /etc/rc.d/rc.local script file I insert the following lines: /sbin/ipx_interface delall /sbin/ipx_interface add -p eth0 802.2 We happen to be using 802.2. You can substitute ETHERNETII or whatever your fame type happens to be. After I do that everything works. I am puzzled that you can see the server with slist. It seems like if you were having a fundamental problem where the interface wasn't setup correctly then you wouldn't be able to see the server at all. On Tue, 2002-02-19 at 12:55, James Pifer wrote: I'm trying to use ncpmount to connect to a Netware server. I've followed the howto and have done this: #ipx_configure --auto_interface=on --auto_primary=on I can then do: #slist servername and it returns the servername with the correct IPX address, etc. When I try to issue the ncpmount command I can't login. I'm trying: #ncpmount -S servername -V volume /share/sys -C -U username -P password I keep getting ncpmount: Invalid password (-669) in nds login Login denied. -I have the server in /etc/hosts in case it matters -I've tried two different logins and I know the passwords are correct. -I've tried with and without -C, which I don't think would make a difference here anyway -I've tried just the username, as well as distinguished, such as username.context -I've tried without -P so it prompts for username. Can anyone help out? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
How do I reinstall Linux
Hi! Ihad two operating systems on my computer: Linux and Windows98. LILOwas acting as Boot Loader. Recently I installed Windows XP on the windows partition, but XP installed their own boot loaderand now I am forced to enter Linux through a Linux boot disk. Does anyone know how can I reinstall LILO as Boot Loader. Thanks in advance Nono
RE: How do I reinstall Linux
make an entry for XP in /etc/lilo.conf run /sbin/lilo Jeff Graves Customer Support Engineer Image Source, Inc. 10 Mill Street Bellingham, MA 02019 508.966.5200 X31 - Phone 508.966.5170 - Fax [EMAIL PROTECTED] - Email -Original Message- From: [EMAIL PROTECTED] [mailto:[EMAIL PROTECTED]]On Behalf Of Ing. Nono Carballo Escalona Sent: Wednesday, February 20, 2002 1:47 PM To: [EMAIL PROTECTED] Subject: How do I reinstall Linux Hi! I had two operating systems on my computer: Linux and Windows98. LILO was acting as Boot Loader. Recently I installed Windows XP on the windows partition, but XP installed their own boot loader and now I am forced to enter Linux through a Linux boot disk. Does anyone know how can I reinstall LILO as Boot Loader. Thanks in advance Nono ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Reinstalling LILO (Was: How do I reinstall Linux)
Does anyone know how can I reinstall LILO as Boot Loader. Boot into Linux and then run /sbin/lilo :) Of course, XP won't boot after you do that. XP might follow the protocol for getting NT to boot from LILO.. but you'll have to ask someone who knows for sure. BTW: XP sucks terribly... can it :) -Statux ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
I've tried both. When using the -b to force bindery connection I get an unknown server error: ncpmount: Unknown server (0x89FC) in login James On Wed, 2002-02-20 at 13:25, Francisco Neira wrote: This could be silly but, is connection attempted to NDS or to the bindery? Francisco [EMAIL PROTECTED] 20/02/02 13:23 I used the commands and I get the same results. I can do an slist and see the server, but get and invalid nd login when I try to use ncpmount.Can you send me an example of your ncpmount command? I even tried a user on netware that has no password and used the -n option. It still says 'Invalid password (-669) nds login' Thanks, James On Wed, 2002-02-20 at 12:32, Carl D. Blake wrote: I interface Redhat 7.1 to a 4.11 Netware server. I tried the command you list and it worked just fine for me. I don't really see a problem with your ncpmount command. The only other thing I can think of is that I configured the ipx interface differently. I didn't have to do ipx_configure --auto_interface=on --auto_primary=on In fact when I've tried that before I've had trouble getting it working. In my /etc/rc.d/rc.local script file I insert the following lines: /sbin/ipx_interface delall /sbin/ipx_interface add -p eth0 802.2 We happen to be using 802.2. You can substitute ETHERNETII or whatever your fame type happens to be. After I do that everything works. I am puzzled that you can see the server with slist. It seems like if you were having a fundamental problem where the interface wasn't setup correctly then you wouldn't be able to see the server at all. On Tue, 2002-02-19 at 12:55, James Pifer wrote: I'm trying to use ncpmount to connect to a Netware server. I've followed the howto and have done this: #ipx_configure --auto_interface=on --auto_primary=on I can then do: #slist servername and it returns the servername with the correct IPX address, etc. When I try to issue the ncpmount command I can't login. I'm trying: #ncpmount -S servername -V volume /share/sys -C -U username -P password I keep getting ncpmount: Invalid password (-669) in nds login Login denied. -I have the server in /etc/hosts in case it matters -I've tried two different logins and I know the passwords are correct. -I've tried with and without -C, which I don't think would make a difference here anyway -I've tried just the username, as well as distinguished, such as username.context -I've tried without -P so it prompts for username. Can anyone help out? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
kde + PPP default gateway
I've searched the archives and have not found my answer, although there's tons of stuff on PPP connections. Anyway, I'm using KDE's Internet Dialer on RH72 using the following settings: Dynamic IP Default Gateway (not static) (also tried Assign the default route to this gateway) I get a connection and get and IP address assigned, but I cannot route to the network anywhere. Do I have to add a route manually when using a dial up connection? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Startup Application
At 11:48 2/20/2002 -0600, Ed Wilts wrote: On Wed, Feb 20, 2002 at 10:25:20AM -0500, James Pifer wrote: When you're doing things on your system where you need to get to files etc, is it just standard practice to su to root to get more permissions, etc? The normal practise is to install and use sudo [snip] That's true for systems that have more than one sysadmin. One my home systems and on some of the systems I work with, I'm the only sysadmin. On those systems, setting up sudo is a waste of time. Tony -- Anthony E. Greene [EMAIL PROTECTED] PGP Key: 0x6C94239D AOL/Yahoo Chat: TonyG05 Linux. the choice of a GNU generation. http://www.linux.org/ ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
gnu parted
i have a raid system running RAID 4. i just added 2 extra drives. i was able to have my icp vortex raid controller expand the drives on the RAID. now i'm trying to use gnu parted to expand my last partition from a 40Gig to add the approx +2*18gigs that i added to give around a 70gig partiton on my sda7 how do i do this. been toying around with gnu parted but can't seem to resize the partition or to expand this. Thanks. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RE: How to set IP Forwarding in RH 7.2 ?
netcfg has been removed from RH7.2, no idea why only laptop users need network profiles. The new gadget is Network Configuration under KDE and Gnome, can be run from a console prgram is neat. It is ugly and way to complex for general network configuration but hey deal, I am, Emote: grumbles and walks away. If you are looking for firewalling get gShield it is a well documented script with a bunch of great features for using iptables. -Original Message- From: Kevin Chan [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 19, 2002 11:54 PM To: [EMAIL PROTECTED] Subject: How to set IP Forwarding in RH 7.2 ? Dear all, I would like to know where I can set the IP Forwarding in RH 7.2 and why I can't use the netcfg under Xwindow ? (p.s. I know there are button call IP Forwarding in netcfg on RH 7.0) Thanks and regards, Kevin Chan ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: How to set IP Forwarding in RH 7.2 ?
If you get and install firestarter, it has an option to select to enable ipforwarding. Works great. I have a PeeCee that I tunnel through my 7.1 box. netcfg has been removed from RH7.2, no idea why only laptop users need network profiles. The new gadget is Network Configuration under KDE and Gnome, can be run from a console prgram is neat. It is ugly and way to complex for general network configuration but hey deal, I am, Emote: grumbles and walks away. If you are looking for firewalling get gShield it is a well documented script with a bunch of great features for using iptables. -Original Message- From: Kevin Chan [mailto:[EMAIL PROTECTED]] Sent: Tuesday, February 19, 2002 11:54 PM To: [EMAIL PROTECTED] Subject: How to set IP Forwarding in RH 7.2 ? Dear all, I would like to know where I can set the IP Forwarding in RH 7.2 and why I can't use the netcfg under Xwindow ? (p.s. I know there are button call IP Forwarding in netcfg on RH 7.0) Thanks and regards, Kevin Chan ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- e-mail: [EMAIL PROTECTED] It is God's job to forgive bin Laden. It is our job to set up the meeting. U.S. Marine Corp. Visit - URL: http://www.vidiot.com/ (Your link to Star Trek and UPN) ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Problem with gnorpm cleint
I have redhat 7.1 sever machine, when I tried to user the graphical rpm client (gnorpm in command line), I got error message Gtk-WARNING **: Canot open display. Can anybody tell me how can I use the graphical rpm client gnormp? Thanks Jianping Zhu Department of Computer Science Univerity of Georgia Athens, GA 30602 Tel 706 5423900 ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
I typically use: ncpmount -S server mnt -U username It prompts me for the password and after I type it in I have access to the server. I tried your command: ncpmount -S server -V sys mnt -C -U username -P password which also works for me. I took a look at the FAQ for ncpfs. It mentions using the -b option with ncpmount if you can't login. The man page says to use -b if you're connecting to Netware 4 or 5 through bindery emulation instead of NDS. You could try that and see if it works. What Netware version are you using? On Wed, 2002-02-20 at 11:23, James Pifer wrote: I used the commands and I get the same results. I can do an slist and see the server, but get and invalid nd login when I try to use ncpmount.Can you send me an example of your ncpmount command? I even tried a user on netware that has no password and used the -n option. It still says 'Invalid password (-669) nds login' Thanks, James On Wed, 2002-02-20 at 12:32, Carl D. Blake wrote: I interface Redhat 7.1 to a 4.11 Netware server. I tried the command you list and it worked just fine for me. I don't really see a problem with your ncpmount command. The only other thing I can think of is that I configured the ipx interface differently. I didn't have to do ipx_configure --auto_interface=on --auto_primary=on In fact when I've tried that before I've had trouble getting it working. In my /etc/rc.d/rc.local script file I insert the following lines: /sbin/ipx_interface delall /sbin/ipx_interface add -p eth0 802.2 We happen to be using 802.2. You can substitute ETHERNETII or whatever your fame type happens to be. After I do that everything works. I am puzzled that you can see the server with slist. It seems like if you were having a fundamental problem where the interface wasn't setup correctly then you wouldn't be able to see the server at all. On Tue, 2002-02-19 at 12:55, James Pifer wrote: I'm trying to use ncpmount to connect to a Netware server. I've followed the howto and have done this: #ipx_configure --auto_interface=on --auto_primary=on I can then do: #slist servername and it returns the servername with the correct IPX address, etc. When I try to issue the ncpmount command I can't login. I'm trying: #ncpmount -S servername -V volume /share/sys -C -U username -P password I keep getting ncpmount: Invalid password (-669) in nds login Login denied. -I have the server in /etc/hosts in case it matters -I've tried two different logins and I know the passwords are correct. -I've tried with and without -C, which I don't think would make a difference here anyway -I've tried just the username, as well as distinguished, such as username.context -I've tried without -P so it prompts for username. Can anyone help out? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Problem with gnorpm cleint
On Wed, 20 Feb 2002 15:14:51 -0500 (EST) Jianping Zhu [EMAIL PROTECTED] blurted: I have redhat 7.1 sever machine, when I tried to user the graphical rpm client (gnorpm in command line), I got error message Gtk-WARNING **: Canot open display. Can anybody tell me how can I use the graphical rpm client gnormp? Thanks Jianping Zhu Department of Computer Science Univerity of Georgia Athens, GA 30602 Tel 706 5423900 At a commandline, as the logged in user: xhost +localhost Then try it again. So, what's happening? You're asking gnorpm to open (as root most likely) on a desktop, or display, that the user doesn't have permission to use. The above line lets anyone on the machine use the desktop display until that user logs out. Once that user logs out the display is opened for the next user that logs in, at which time their own permissions take precedence. See 'man xhost' for more info. -- We put the k in kwality ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
Yes, I've tried bindery as well, but I get a different error when doing that. The Netware server I'm trying to hit is 5.1 SP2a. I have the exact same results on two Redhat 7.2 PC's, both running ipxutils-2.2.0.18-6.i386 and ncpfs-2.2.0.18-6.i386. I'm stumped James On Wed, 2002-02-20 at 15:16, Carl D. Blake wrote: I typically use: ncpmount -S server mnt -U username It prompts me for the password and after I type it in I have access to the server. I tried your command: ncpmount -S server -V sys mnt -C -U username -P password which also works for me. I took a look at the FAQ for ncpfs. It mentions using the -b option with ncpmount if you can't login. The man page says to use -b if you're connecting to Netware 4 or 5 through bindery emulation instead of NDS. You could try that and see if it works. What Netware version are you using? On Wed, 2002-02-20 at 11:23, James Pifer wrote: I used the commands and I get the same results. I can do an slist and see the server, but get and invalid nd login when I try to use ncpmount.Can you send me an example of your ncpmount command? I even tried a user on netware that has no password and used the -n option. It still says 'Invalid password (-669) nds login' Thanks, James On Wed, 2002-02-20 at 12:32, Carl D. Blake wrote: I interface Redhat 7.1 to a 4.11 Netware server. I tried the command you list and it worked just fine for me. I don't really see a problem with your ncpmount command. The only other thing I can think of is that I configured the ipx interface differently. I didn't have to do ipx_configure --auto_interface=on --auto_primary=on In fact when I've tried that before I've had trouble getting it working. In my /etc/rc.d/rc.local script file I insert the following lines: /sbin/ipx_interface delall /sbin/ipx_interface add -p eth0 802.2 We happen to be using 802.2. You can substitute ETHERNETII or whatever your fame type happens to be. After I do that everything works. I am puzzled that you can see the server with slist. It seems like if you were having a fundamental problem where the interface wasn't setup correctly then you wouldn't be able to see the server at all. On Tue, 2002-02-19 at 12:55, James Pifer wrote: I'm trying to use ncpmount to connect to a Netware server. I've followed the howto and have done this: #ipx_configure --auto_interface=on --auto_primary=on I can then do: #slist servername and it returns the servername with the correct IPX address, etc. When I try to issue the ncpmount command I can't login. I'm trying: #ncpmount -S servername -V volume /share/sys -C -U username -P password I keep getting ncpmount: Invalid password (-669) in nds login Login denied. -I have the server in /etc/hosts in case it matters -I've tried two different logins and I know the passwords are correct. -I've tried with and without -C, which I don't think would make a difference here anyway -I've tried just the username, as well as distinguished, such as username.context -I've tried without -P so it prompts for username. Can anyone help out? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
I'm stumped too. I'm running a RH 7.1 with ipxutils-2.2.0.18-3.i386, ncpfs-2.2.0.18-3.i386 and a RH 7.2 with ipxutils-2.2.0.18.6.i386, and ncpfs-2.2.0.18-6.i386. Both systems connect to Netware 4.11 SP7 with no problems. I can't understand why you would be having a problem On Wed, 2002-02-20 at 13:48, James Pifer wrote: Yes, I've tried bindery as well, but I get a different error when doing that. The Netware server I'm trying to hit is 5.1 SP2a. I have the exact same results on two Redhat 7.2 PC's, both running ipxutils-2.2.0.18-6.i386 and ncpfs-2.2.0.18-6.i386. I'm stumped James On Wed, 2002-02-20 at 15:16, Carl D. Blake wrote: I typically use: ncpmount -S server mnt -U username It prompts me for the password and after I type it in I have access to the server. I tried your command: ncpmount -S server -V sys mnt -C -U username -P password which also works for me. I took a look at the FAQ for ncpfs. It mentions using the -b option with ncpmount if you can't login. The man page says to use -b if you're connecting to Netware 4 or 5 through bindery emulation instead of NDS. You could try that and see if it works. What Netware version are you using? On Wed, 2002-02-20 at 11:23, James Pifer wrote: I used the commands and I get the same results. I can do an slist and see the server, but get and invalid nd login when I try to use ncpmount.Can you send me an example of your ncpmount command? I even tried a user on netware that has no password and used the -n option. It still says 'Invalid password (-669) nds login' Thanks, James On Wed, 2002-02-20 at 12:32, Carl D. Blake wrote: I interface Redhat 7.1 to a 4.11 Netware server. I tried the command you list and it worked just fine for me. I don't really see a problem with your ncpmount command. The only other thing I can think of is that I configured the ipx interface differently. I didn't have to do ipx_configure --auto_interface=on --auto_primary=on In fact when I've tried that before I've had trouble getting it working. In my /etc/rc.d/rc.local script file I insert the following lines: /sbin/ipx_interface delall /sbin/ipx_interface add -p eth0 802.2 We happen to be using 802.2. You can substitute ETHERNETII or whatever your fame type happens to be. After I do that everything works. I am puzzled that you can see the server with slist. It seems like if you were having a fundamental problem where the interface wasn't setup correctly then you wouldn't be able to see the server at all. On Tue, 2002-02-19 at 12:55, James Pifer wrote: I'm trying to use ncpmount to connect to a Netware server. I've followed the howto and have done this: #ipx_configure --auto_interface=on --auto_primary=on I can then do: #slist servername and it returns the servername with the correct IPX address, etc. When I try to issue the ncpmount command I can't login. I'm trying: #ncpmount -S servername -V volume /share/sys -C -U username -P password I keep getting ncpmount: Invalid password (-669) in nds login Login denied. -I have the server in /etc/hosts in case it matters -I've tried two different logins and I know the passwords are correct. -I've tried with and without -C, which I don't think would make a difference here anyway -I've tried just the username, as well as distinguished, such as username.context -I've tried without -P so it prompts for username. Can anyone help out? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- Carl D. Blake Electronics Design Engr. Mgr. Boeckeler Instruments, Inc. 4650 S. Butterfield Dr. Tucson, AZ 85714 Phone: 520-745-0001 FAX: 520-745-0004 email: [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED]
RE: Newbie - Creating a Cron Job
Use " crontab -e" to configure cron. Most likely you will have vi opening your crontab kind of icky if you don't knowhow to use it. You can set your editor to anything with " export EDITOR=Your_favorite_Editor" for bash, use setenv for csh. Run the export or setenv before the crontab -e. logrotate is different as it is built in, check /etc/logrotate.d/ and /etc/logrotate.conf. Cron is your friend I recommend you learn how it functions as it will make your life easier once you do. In general like every thing else you should run cron jobs as a user other than root . -Original Message-From: Alexander Shaw [mailto:[EMAIL PROTECTED]]Sent: Wednesday, February 20, 2002 5:40 AMTo: Redhat ListSubject: Newbie - Creating a Cron Job Hi all, In the process of making things up as I go along again. I have created a logrotate file on the direction of another person to back up my databases on MySQL. Now I understand that this needs to be called from Cron for it to work. Having had a browse around I see there is a reference to logrotate in the cron.daily folder, do I need to add anything extra to ensure that the file I have added is executed? For the purpose of testing what extra could I add to run the process at short intervals to check it is working? TIA Alex
Re: more cd burning questions
Right, you definitely don't want to turn off IDE support. Not only would it prevent your CD-ROMs from working, but your floppy and hdd wouldn't work either. :) (Unless they happen to be SCSI.) Heh, in which case all this ide-scsi stuff wouldn't be necessary. :-) So how do I set the kernel to unclaim the cdrom for the scsi module? (change the symbolic link right?) Many thanks. -Brandon _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: openssh redhat 6.2
where is the RedHat 7.0 openssh stuff. can't find it anywhere. redhat doesn't seem to have it on there site. On Wed, 20 Feb 2002, Emmanuel Seyman wrote: On Wed, Feb 20, 2002 at 09:28:59AM -0800, Steve Lee wrote: what is the best way to do this.? Get the source rpm from openbsd.org (use the mirrors). Install it, edit the spec file to disable RH7-pam-use and build the rpm. Install, activate, enjoy. Emmanuel ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: openssh redhat 6.2
Steve Lee [EMAIL PROTECTED] writes: where is the RedHat 7.0 openssh stuff. can't find it anywhere. redhat doesn't seem to have it on there site. It's in the distribution and in the updates for Red Hat Linux 7 and later. We have not released it for Red Hat Linux 6.2. -- Trond Eivind Glomsrød Red Hat, Inc. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RE: system performance monitoring
Several different products are available. Big Brother with larrd and rrdtools works well, MRTG, and Demarc. You can use SAR to collect data and there are several products that make spiffy charts like analog. Kind of depends on what you want to do. I use Big Brother as it does a good job of process monitoring along with the performance information. larrd builds the graphs on the fly and they have good depth up to 18 months out of the box. Demarc has some nice bits also. -Original Message- From: Matthew Boeckman [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 20, 2002 11:16 AM To: [EMAIL PROTECTED] Subject: system performance monitoring Some of you may be familiar with Blair Zajac's ORCA (http://www.orcaware.com/orca/), which works wonderfully with Adrian Cocroft's SE performance toolkit for solaris. I'm wondering if anyone is aware of a similair solution for redhat. Specifically I'm looking for something that gif-ifies system utilization, broken out by CPU/mem/net, etc. I'm aware of things like GKRELLM, but it does not archive results. Any ideas? -- Matthew Boeckman(816) 777-2160 Manager - Systems Integration Saepio Technologies == == The secret to how our government controls information is easily expl*** **MESSAGE TRUNCATED** ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RE: How do I reinstall Linux
Use a linux boot/install disk/cd when you get a command line enter "linux rescue" you should be asked a couple of ??? keyboard and lang. Once you have a shell prompt you should be able to "chroot /mnt/sysimage" to get your linux to load again run "lilo -v -v" which will rebuild your MBR. Microsoft Windows always abuses the MBR. This should get you back to the way you where. You may want to alter /etc/lilo.conf and change the display name for your old windows partition but this is not necessary. -Original Message-From: Ing. Nono Carballo Escalona [mailto:[EMAIL PROTECTED]]Sent: Wednesday, February 20, 2002 1:47 PMTo: [EMAIL PROTECTED]Subject: How do I reinstall Linux Hi! Ihad two operating systems on my computer: Linux and Windows98. LILOwas acting as Boot Loader. Recently I installed Windows XP on the windows partition, but XP installed their own boot loaderand now I am forced to enter Linux through a Linux boot disk. Does anyone know how can I reinstall LILO as Boot Loader. Thanks in advance Nono
RE: how to get linuxconf work
Most likely not installed. You can try locate linuxconf or rpm -qs |grep linuxconf -Original Message- From: Jianping Zhu [mailto:[EMAIL PROTECTED]] Sent: Wednesday, February 20, 2002 4:11 PM To: [EMAIL PROTECTED] Cc: [EMAIL PROTECTED] Subject: how to get linuxconf work I install redhat 7.2 as server. When I try to use linuxconf at root, I get error message as fllowing: bash:linuxconf:Command not found. Why and how to fix the problem. Thanks. Jianping Zhu Department of Computer Science Univerity of Georgia Athens, GA 30602 Tel 706 5423900 ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
silly KDE keyboard shortcuts
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Ok, why is it that there are keyboard shortcuts for accessing individual elements of Konsole menus, but not for opening the menus in the first place? I need to reach for the mouse and poke 'session', and then I can use 'e' for 'Rename session'. That's my gripe for the day. Cheers -d - -- David Talkington PGP key: http://www.prairienet.org/~dtalk/0xCA4C11AD.pgp - -- http://setiathome.ssl.berkeley.edu/pale_blue_dot.html -BEGIN PGP SIGNATURE- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75-6 iQA/AwUBPHQlub9BpdPKTBGtEQKykgCg3K+whpY+1toGt8rO4lsdS7HA9o4An2cd S/2zNbq+bR0KWpyWTNSSUSeW =9tEo -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
how to get linuxconf work
I install redhat 7.2 as server. When I try to use linuxconf at root, I get error message as fllowing: bash:linuxconf:Command not found. Why and how to fix the problem. Thanks. Jianping Zhu Department of Computer Science Univerity of Georgia Athens, GA 30602 Tel 706 5423900 redhat Description: Binary data
sendmail woes
hi. my ability to receive email decided to break again. this has happened to me before and i assume this is some linux security thing that i haven't figured out yet. the only thing i knowingly changed was that i upgraded some windowmanager software and rebooted. after the reboot. no more mail. if someone could throw me some hints, i'd greatly appreciate it. yes. i can read your email from another machine ;^) the last time this happened, i fixed it by accident. i really don't know where to start. sendmail just ain't my cup of tea. the port is working: telnet localhost 25 Trying 127.0.0.1... Connected to localhost. Escape character is '^]'. 220 olive.bsd.uchicago.edu ESMTP Sendmail 8.11.6/8.11.6; Wed, 20 Feb 2002 16:50:42 -0600 helo olive 250 olive.bsd.uchicago.edu Hello localhost.localdomain [127.0.0.1], pleased to meet you here's what a test email to this machine generates: --- - The following addresses had transient non-fatal errors - [EMAIL PROTECTED] - Transcript of session follows - [EMAIL PROTECTED]... Deferred: Connection refused by olive.bsd.uchi cago.edu. Warning: message still undelivered after 4 hours Will keep trying until message is 5 days old Reporting-MTA: dns; midway.uchicago.edu Arrival-Date: Wed, 20 Feb 2002 10:44:30 -0600 (CST) Final-Recipient: RFC822; [EMAIL PROTECTED] Action: delayed Status: 4.4.1 Remote-MTA: DNS; olive.bsd.uchicago.edu Last-Attempt-Date: Wed, 20 Feb 2002 14:52:14 -0600 (CST) Will-Retry-Until: Mon, 25 Feb 2002 10:44:30 -0600 (CST) --- thanks. -- Fred Dech [EMAIL PROTECTED] University of Chicago Dept. of Surgery (773) 834-8359 ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
rcp, nfs or ftp?
I'm trying to figure out from a bandwidth, system utilization and security standpoint which transfer protocol is better... (ie. pros and cons) Is there a significant difference between the three? I'm automating certain things and trying to figure out which is better in transfering files? Any insight would be appreciated... Jeff Williams ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: silly KDE keyboard shortcuts
Hello David, Wednesday, February 20, 2002, 5:39:47 PM, you textually orated: DT Ok, why is it that there are keyboard shortcuts for accessing DT individual elements of Konsole menus, but not for opening the menus in DT the first place? DT I need to reach for the mouse and poke 'session', and then I can use DT 'e' for 'Rename session'. DT That's my gripe for the day. Cheers -d Don't worry. You're not alone. ;) But they are doing something about it... http://developer.kde.org/development-versions/kde-3.0-features.html Have fun, -- _ Brian Ashe CTO [EMAIL PROTECTED] Dee-Web Software Services, LLC. http://www.dee-web.com/ - ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
RH72 VPN Questions [repost]
Can anyone help with here? Need to be able to VPN and not sure where to go. On my new install of RH72 I need to be able to VPN either with PPTP or IPSec. 1) I searched google.com for a pptp client and found one, but when I try to install it I get a kernel version mismatch. So apparently it was built for an older kernel. (my kernel is 2.4.7-10). Is there a pptp client that will work on my version? 2) IPSec. I also searched for IPSec and everything seemed to point me to freeswan. I've been looking at the documentation. Is it required to rebuild the kernel to be able to use freeswan as an IPSec client? Are there RPM's available for Redhat for freeswan? I haven't found any. Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: rcp, nfs or ftp?
The most significant differences are in terms of security. NFS has none. FTP has limited security - it does user authentication but all the data, including the authentication, goes over the wire in plain text. scp secures both the authentication and transport. scp will incur some CPU overhead since it does encrypt, but given today's processors, this is usually not an issue. .../Ed Ed Wilts Mounds View, MN, USA mailto:[EMAIL PROTECTED] From: Williams, Jeff [EMAIL PROTECTED] I'm trying to figure out from a bandwidth, system utilization and security standpoint which transfer protocol is better... (ie. pros and cons) Is there a significant difference between the three? I'm automating certain things and trying to figure out which is better in transfering files? ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: [OT] Subnets and Classes
Any documentation that states this is a class B network is wrong. It is a class C. Here is the breakdown... Class Netmask Network Addresses A 255.0.0.0 0.0.0.0- 127.255.255.255 B 255.255.0.0 128.0.0.0 - 191.255.255.255 C 255.255.255.0 192.0.0.0 - 223.255.255.255 These are the defaults. This explains a lot. After reading this, I stepped back to my original reference below which I saved years ago from the internet: --- Section 3: Private Address Space The Internet Assigned Numbers Authority (IANA) has reserved the following three blocks of the IP address space for private networks: 10.0.0.0- 10.255.255.255 172.16.0.0 - 172.31.255.255 192.168.0.0 - 192.168.255.255 We will refer to the first block as 24-bit block, the second as 20-bit block, and the third as 16-bit block. Note that the first block is nothing but a single class A network number, while the second block is a set of 16 continuous class B network numbers, and the third block is a set of 255 continuous class C network numbers. --- I actually misread it. When it specifies here 192.168.0.0 - 192.168.255.255, AND that it is a 16 bit block, I thought it was a class B as I seemed to have 255 * 255 combinations of addresses. But it specifically says on the last sentence it is actually by default a Class C. A bit confusing as I though a 16 bit block meant B Class. My only excuse is I tried to read and understand it while I was still a newbie years ago, and it 'stuck' in my head. HOWEVER. Do Linux Servers/Win Clients actually KNOW this, or should the netmask of 255.255.0.0 override this as the other kind repondents have said? OR is the only way around it to add the route line to the Linux server (yes, the Linux server acts as gateway to the Win clients)? I guess next time I'll just try it both ways. Thanks to all repondents for your time. Edward. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
On Thu, 2002-02-21 at 07:54, Carl D. Blake wrote: I'm stumped too. I'm running a RH 7.1 with ipxutils-2.2.0.18-3.i386, ncpfs-2.2.0.18-3.i386 and a RH 7.2 with ipxutils-2.2.0.18.6.i386, and ncpfs-2.2.0.18-6.i386. Both systems connect to Netware 4.11 SP7 with no problems. I can't understand why you would be having a problem On Wed, 2002-02-20 at 13:48, James Pifer wrote: Yes, I've tried bindery as well, but I get a different error when doing that. The Netware server I'm trying to hit is 5.1 SP2a. Well, doesn't 4.2 uses IPX by default (and TCP/IP as an option), and 5.1 does TCP/IP by default (and IPX as an option)? Hossein ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: openssh redhat 6.2
would the later distributions src rpm compile under RedHat 6.2 ? or am i just stuck without it ? On 20 Feb 2002, Trond Eivind Glomsrød wrote: Steve Lee [EMAIL PROTECTED] writes: where is the RedHat 7.0 openssh stuff. can't find it anywhere. redhat doesn't seem to have it on there site. It's in the distribution and in the updates for Red Hat Linux 7 and later. We have not released it for Red Hat Linux 6.2. ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: more cd burning questions
Brandon wrote: Right, you definitely don't want to turn off IDE support. Not only would it prevent your CD-ROMs from working, but your floppy and hdd wouldn't work either. [:)] (Unless they happen to be SCSI.) Heh, in which case all this ide-scsi stuff wouldn't be necessary. [:-)] So how do I set the kernel to unclaim the cdrom for the scsi module? (change the symbolic link right?) Many thanks. I think what the document was talking about was turning off the ide-cd driver support. This is the driver you are using if you are mounting a CD using the device file /dev/hd*. When you use ide-scsi, you have two sets of device files to use, depending on what you are doing. Mounting a CD uses block device files, and these are /dev/sr* or /dev/scd* (I notice that RH 7.2 only has the /dev/scd* files), and use the sr driver. By the way, if compiled as a module, the sr driver becomes the sr_mod driver. Programs like cdrecord (and I think some audio CD players) use character device files, and these are /dev/sg*, and use the sg driver. Since by convention the cdrom block device files are expected to be named /dev/cdrom*, again by convention these will normally be made symbolic links to the appropriate real device files. So one way to be sure that the ide-cd driver does not grab ahold of the cdrom, is to simply not compile in the ide-cd driver. If you have done this, and the ide-cd driver is still grabbing the cdrom, then you did something wrong in the compile or kernel installation step:-) After all, if the ide-cd driver is not in the kernel, it cannot attach to the cdrom. By the way, you can tell that the ide-cd driver is attached to the cdrom by the second set of messages in /var/log/dmesg mentioning hcd and hdd. You can also leave the ide-cd driver compiled into the kernel, but tell it not to attach to the cdroms with the lines in /etc/lilo.conf like: append=hdc=ide-scsi If you have put those lines there, and the ide-cd driver is still grabbing ahold of the cdrom, then you made a mistake somewhere with lilo. In any case, if I were in your place, since you already are somewhat familiar with the process, I would simply go through the kernel config / compile / install again, turn off ide-cd, and make sure I did not skip a piece of the process. And then go through the lilo config process again. Duane ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: 80% packet loss
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Tuesday, February 19, 2002, 10:04:32 PM, Monte wrote: If I use the ip address of another machine on my LAN, I can ping just fine. But if I try pinging the same machine by name, I get ~80% packet loss. WTF? I was seeing similar things a few weeks ago. My issues were related to pinging machines by IP vs. by name, too. I did not try this with another machine on my LAN, but was seeing it with systems on the Internet. In my case, it turned out to be a DNS issue. When ATT had their eXcite melt-down several weeks ago, they had a bad DNS server. So, I hard-coded my own set of DNS servers, bypassing the ones that ATT's DHCP was handing me (that included the bad server). As it turned out, one of these got taken down shortly thereafter. Removing that DNS server from my list made everything return to normal. (You cannot imagine the frustration involved with trying to tell people who barely know how to boot Windows that one of their DNS servers is flakey, only to have them tell you that you need to try rebooting.) Ron. -BEGIN PGP SIGNATURE- Version: PGP Personal Privacy 6.5.8 Comment: The last PGP with full source disclosure. iQA/AwUBPHQ/pm8pw+2/9pUJEQLtrACfVtoI+GIOfJxZGTRBMo2Gfo9CtnwAnRVA vpKkk7IrlKg5+4ky2zXAlSqM =Dukh -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: rcp, nfs or ftp?
scp. If you have to choose among the three you gave, do NOT choose ftp. I don't think bandwidth is much of a concern for any of these. For large # of files, do rsync over ssh. Jon On Wed, 20 Feb 2002, Williams, Jeff wrote: I'm trying to figure out from a bandwidth, system utilization and security standpoint which transfer protocol is better... (ie. pros and cons) Is there a significant difference between the three? I'm automating certain things and trying to figure out which is better in transfering files? Any insight would be appreciated... Jeff Williams ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: rcp, nfs or ftp?
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Williams, Jeff wrote: I'm trying to figure out from a bandwidth, system utilization and security standpoint which transfer protocol is better... (ie. pros and cons) Is there a significant difference between the three? I'm automating certain things and trying to figure out which is better in transfering files? There are more important considerations than speed. If you're transferring files between two machines with an internet connection, they all stink. Paint us a picture of your needs, topology, and expectations? - -d - -- David Talkington PGP key: http://www.prairienet.org/~dtalk/0xCA4C11AD.pgp - -- http://setiathome.ssl.berkeley.edu/pale_blue_dot.html -BEGIN PGP SIGNATURE- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75-6 iQA/AwUBPHRIzb9BpdPKTBGtEQJQ9QCfc6Ft3XX5PjqCHL1xUrCO17OD4iMAoIm6 UPKIw3tV9zD97yfwZ1Z/ffvV =9pCA -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
USB Joystick and USB Hub
Is it true I have to recompile the kernel to use my USB joystick and USB hub? My install is fairly new, RH72(full install). I have stuff listed in /dev/input like js0, js1, etc. If I do cat /dev/input/js0 I get No such device. Didn't find much in the archives about joysticks. What I did find searching google was a lot about rebuilding the kernel. How can I tell if RH sees my USB hub and joystick? Thanks, James ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: 80% packet loss
On Wed, 20 Feb 2002 19:30:35 -0500 Ronald W. Heiby [EMAIL PROTECTED] wrote: -BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Tuesday, February 19, 2002, 10:04:32 PM, Monte wrote: If I use the ip address of another machine on my LAN, I can ping just fine. But if I try pinging the same machine by name, I get ~80% packet loss. WTF? I was seeing similar things a few weeks ago. My issues were related to pinging machines by IP vs. by name, too. I did not try this with another machine on my LAN, but was seeing it with systems on the Internet. In my case, it turned out to be a DNS issue. When ATT had their eXcite melt-down several weeks ago, they had a bad DNS server. So, I hard-coded my own set of DNS servers, bypassing the ones that ATT's DHCP was handing me (that included the bad server). As it turned out, one of these got taken down shortly thereafter. Removing that DNS server from my list made everything return to normal. (You cannot imagine the frustration involved with trying to tell people who barely know how to boot Windows that one of their DNS servers is flakey, only to have them tell you that you need to try rebooting.) Ron. Actually, I think it might have been due to a flaky DNS server setup in my home LAN, but it picked an odd time to rear its head, since everything seemed to be working fine before this. Not a huge deal, really, since I am moving pretty much everything back to RedHat. The servers next ;). Thanks, Monte -- All right, breaks over. Back on your heads!! _ Do You Yahoo!? Get your free @yahoo.com address at http://mail.yahoo.com ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
cups printing server
Hey guys, I was curious if anyone has setup a cups printing server on Red Hat yet. What do you do on both the client and server side? Thanks Kevin Breit ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: cups printing server
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Kevin Breit wrote: I was curious if anyone has setup a cups printing server on Red Hat yet. What do you do on both the client and server side? It's slick! Here's the (short) story of how I got my Epson c80 working on Red Hat. http://www.moongroup.com/archives/linux/2001-11/msg00010.html Cheers -d - -- David Talkington PGP key: http://www.prairienet.org/~dtalk/0xCA4C11AD.pgp - -- http://setiathome.ssl.berkeley.edu/pale_blue_dot.html -BEGIN PGP SIGNATURE- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75-6 iQA/AwUBPHRUQ79BpdPKTBGtEQJoBACdF0kP1FGEWM//8hGypqhmp1uZQmgAoMe/ kEtj5afi3YkJ9ttEfb9UsXxx =m/PH -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: sendmail autoreply
hi, Can anyone help to advise where can I find more info regarding vacation package, like how-to doc??? Thanks, gary - Original Message - From: Ade Talabi [EMAIL PROTECTED] To: [EMAIL PROTECTED] Sent: Friday, February 15, 2002 8:33 PM Subject: Re: sendmail autoreply You create a .vacatioon file in your home directory, and this kicks into place. ([EMAIL PROTECTED]) said thusly on [10/02/02 at 06:33]: Hi guys! I know a tool whose name is vacation could auto reply the senders. But I can't find it out from RH 7.2 cds, where could I get it or it's in another RPM package? If so, what's name of it? Any help will be appreciated! ,[ ade talabi ]- | #--- | I had no idea this thing was televised. Boy, is my face red. David Letterman , after doing a less-than-wonderful job of hosting the Academy Awards, 1995 | #--- `[ mutt rules ]- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Startup Application
On Wed, Feb 20, 2002 at 10:25:20AM -0500, James Pifer wrote: Ben, Thanks. I have taken your advice and I am not using root for my login. Moving Evolution was a pain, but hopefully done now. This does lead me to a question. Great, I think you'll be happier this way. Especially if you're like me and sometimes type something stupid. :) When you're doing things on your system where you need to get to files etc, is it just standard practice to su to root to get more permissions, etc? That's what I do. I use sudo for the few things that I want everyone else (in my family) to be able to use but that require root access. For example, burning CDs or getting pictures off the digital camera. I also set sudo up for a few relatively harmless things that I do often, like miscellaneous mount commands--it saves some typing. A friend had sudo setup so that he could get a root shell without a password. I don't do that because I consider it a security risk...if my account gets cracked, the intruder doesn't even need to know the root password. Regards, Ben -- Ben Logan: ben at wblogan dot net OpenPGP Key KeyID: A1ADD1F0 Unibus timeout fatal trap program lost sorry - An error message printed by DEC's RSTS operating system for the PDP-11 ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Startup Application
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 Ben Logan wrote: That's what I do. I use sudo for the few things that I want everyone else (in my family) to be able to use but that require root access. For example, burning CDs Even that's not necessary, if you're willing to make cdrecord suid-0. - -d - -- David Talkington PGP key: http://www.prairienet.org/~dtalk/0xCA4C11AD.pgp - -- http://setiathome.ssl.berkeley.edu/pale_blue_dot.html -BEGIN PGP SIGNATURE- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75-6 iQA/AwUBPHRWvr9BpdPKTBGtEQJxRQCeNmFRsdP9ZwQiJaQNIeSySGmloTkAoK8x p/5eSoQ4XvAjOAHiKBKdWFLn =NIFw -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: cups printing server
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 David Talkington wrote: I was curious if anyone has setup a cups printing server on Red Hat yet. What do you do on both the client and server side? It's slick! Here's the (short) story of how I got my Epson c80 working on Red Hat. http://www.moongroup.com/archives/linux/2001-11/msg00010.html Kevin - I should also mention that once you get past the holy shit, it works! stage -- which was a really long phase, in my case, since my history with printing systems is pretty ugly, and this thing Just Worked(tm) -- you might want this: http://www.cups.org/book/index.html I found it very helpful as a reference for config options. You'll almost certainly want to tighten down access a bit after it's up. Have fun ... -d - -- David Talkington PGP key: http://www.prairienet.org/~dtalk/0xCA4C11AD.pgp - -- http://setiathome.ssl.berkeley.edu/pale_blue_dot.html -BEGIN PGP SIGNATURE- Version: PGP 6.5.8 Comment: Made with pgp4pine 1.75-6 iQA/AwUBPHRaR79BpdPKTBGtEQIUtACdEv1bBmE8hkBtSRMNFEOteQrLnskAnilM sOqcHbz4lJfJx9kDI+bh9nzs =5oNh -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Connecting to Novell
On Thu, Feb 21, 2002 at 11:29:15AM +1100, Hossein S. Zadeh wrote: On Thu, 2002-02-21 at 07:54, Carl D. Blake wrote: I'm stumped too. I'm running a RH 7.1 with ipxutils-2.2.0.18-3.i386, ncpfs-2.2.0.18-3.i386 and a RH 7.2 with ipxutils-2.2.0.18.6.i386, and ncpfs-2.2.0.18-6.i386. Both systems connect to Netware 4.11 SP7 with no problems. I can't understand why you would be having a problem On Wed, 2002-02-20 at 13:48, James Pifer wrote: Yes, I've tried bindery as well, but I get a different error when doing that. The Netware server I'm trying to hit is 5.1 SP2a. Well, doesn't 4.2 uses IPX by default (and TCP/IP as an option), and 5.1 does TCP/IP by default (and IPX as an option)? Hossein my campus using novell ver. 4.11, about a month ago from my redhat box and potato(debian) successfully mount novell(using -b as parameter), but after that suddenly two linux box can't connected to, I know it's silly, until now I don't know why? because both setting doesn't change. but when I reboot my linux box, it can mount again. what cause it? ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list -- ichtus -- Lewi Supranata .K ICQ: 50643061 msg72431/pgp0.pgp Description: PGP signature
Re: is there any script/program to strip out the attachment from the mail?
On 12:22 20 Feb 2002, Edward C. Bailey [EMAIL PROTECTED] wrote: | li == [EMAIL PROTECTED] writes: | li Is there any script/program to strip out the attachment from the mail? | How about metamail? And also DeMIME. -- Cameron Simpson, DoD#743[EMAIL PROTECTED]http://www.zip.com.au/~cs/ 55 mph is fast enough to get you killed, but slow enough to make you think you're safe.- The Gumball Rally ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: sendmail woes
-BEGIN PGP SIGNED MESSAGE- Hash: SHA1 On Wed, 20 Feb 2002, Fred Dech wrote: my ability to receive email decided to break again. [snip] - Transcript of session follows - [EMAIL PROTECTED]... Deferred: Connection refused by olive.bsd.uchi cago.edu. It looks like sendmail is not listening on your external IP address. This is the default config for RH72. You need to edit sendmail.mc and rebuild sendmail.cf. The exact steps are in the archive for this list. Tony - -- Anthony E. Greene [EMAIL PROTECTED] http://www.pobox.com/~agreene/ PGP Key: 0x6C94239D/7B3D BD7D 7D91 1B44 BA26 C484 A42A 60DD 6C94 239D Chat: AOL/Yahoo: TonyG05 Linux. The choice of a GNU generation http://www.linux.org/ -BEGIN PGP SIGNATURE- Version: GnuPG v1.0.6 (GNU/Linux) Comment: Anthony E. Greene [EMAIL PROTECTED] 0x6C94239D iD8DBQE8dFqspCpg3WyUI50RAhP8AKDxw99bgkia1ftw6C0Xo87UdzZNsQCgiUMm 5nY8pjGEcM3gAvSoNX3/9rk= =Xjn4 -END PGP SIGNATURE- ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Re: Redhat Kernel
On Sat, 16 Feb 2002 [EMAIL PROTECTED] wrote: I trying to replace my old kernel which is 2.4.7-10 to 2.4.17, I have it download and I did complie it. I am looking for easy of doing it, I when to the How-to's and Redhat website and I have no idea how to replace the old with the new? Brian Brian, Is that source code from kernel.org or an RPM file? I don't have the time to check and see what the latest Red Hat RPM kernel file available on their servers is. In any case, if you are referring to the pristine source from kernel.org or one of their mirrors, take a look at the README file once you extract the tarball. You have all the directions there. On the other hand, if you have the RPM kernel you should install it using the regular 'rpm' command although most likely you'll want to make sure you run it with the 'rpm -ivh' options instead of 'rpm -Uvh'. That should be it. -- Nitebirdz Mozilla-- http://www.mozilla.org/ Linux XFS-- http://oss.sgi.com/projects/xfs/ ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list
Autostart stuff in my tray
Hi All, RH7.1 KDE2.1.1. I can't find the method used to autostart the logoff and screenlock buttons in my system tray. I never use these buttons. Can anyone give me an idea where they're started please?. Also, I use a nice little program called Tuxcards http://www.tuxcards.de (very handy for collecting/organising those little bits of usefull info from this list ;-)) which I autostart and have running all the time. Thing is I'd like to move it's taskbar entry to the tray, can this be done? Thanks for all and any help. -- Bob Rogers. Eaglehawk, Victoria, Australia. [EMAIL PROTECTED] ___ Redhat-list mailing list [EMAIL PROTECTED] https://listman.redhat.com/mailman/listinfo/redhat-list