Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Been a long time since I used a 3.5 system, but it should still work similar today. Sounds like its waiting for network. Start as you would, then plug a network cable in. You should be able to connect that way and then look at the boot logs. Or connect a keyboard and monitor to see what is going on. Make sure you did not setup other network mounts while you had it connected to a wire. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I have a RPi 2 running PiCore Player 3.5.0 that is my travel music system. I attach a SSD, run squeezelite and LMS on it and plus on some headphones or a speaker and it worked fine. I set up wireless access point so I can control it from my phone. It worked fine a year ago. Now, the AP fires up on boot, and is visible with an IP address of 10.10.10.1 and it allocates my phone 10.10.10.75, so that is working. BUT neither the LMS, or the PiCoreplayer interface pages appear on any IP address my phone can access. If I pull out my wifi dongle and reboot on a network cable, it grabs an IP address from my DHCP and all works fine. I've obviously not set something up, or I've switched something off but nothing I can find. I've not set the IP address as fixed (which is what I thought I'd done) - so any ideas? jemhayward's Profile: http://forums.slimdevices.com/member.php?userid=55065 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Man in a van wrote: > Try using SSH > > https://www.picoreplayer.org/how_to_access_pcp_via_ssh.shtml > > > to access alsamixer? > > 27521 Solved! Pumping up the alsamixer made the difference. Thanks to everyone for the help. pettifoggery's Profile: http://forums.slimdevices.com/member.php?userid=69041 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
pettifoggery wrote: > I'm on 4.1.0. I didn't see the 3.00 thread title. Sorry about that. > > Anyway, after adding hw:CARD=cubik to the output setting box the > speakers are now working. Though the output is a bit low. If I whack the > LMS output up to 100% it's still barely audible. And with lots of hiss. > Used with the PC & Volumio they are loud enough to fill my home office. > Is there something else I need to tweak? > > Sorry if this is getting a bit long-winded and boring. Really appreciate > your time and the step-by-step help. Try using SSH https://www.picoreplayer.org/how_to_access_pcp_via_ssh.shtml to access alsamixer? 27521 +---+ |Filename: alsamixer.jpg| |Download: http://forums.slimdevices.com/attachment.php?attachmentid=27521| +---+ Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
USB devices often have many possible output settings. Expand the more> by the output setting, you should see all of the possible choices. You also may need to set the Alsa volume to max piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Paul Webster wrote: > Now go to the pCP web interface and choose Squeezelite - and then from > the "Audio settings" section at the top choose "USB Audio" and hit > save. > It should then ask to reboot ... to which you should say yes. > > Then, when it comes back, go to the same place and pick one of the > listed USB audio devices. > If the first does not work ... try one of the others ... and repeat > until working. > > Also - I see that your USB speakers registered a "HID" device (human > interface) ... so there is a good chance that the remote control that > came with it will work. > > > Also we are in the pCP 3.00 thread here ... but hopefully you are > running pCP 4.something I'm on 4.1.0. I didn't see the 3.00 thread title. Sorry about that. Anyway, after adding hw:CARD=cubik to the output setting box the speakers are now working. Though the output is a bit low. If I whack the LMS output up to 100% it's still barely audible. And with lots of hiss. Used with the PC & Volumio they are loud enough to fill my home office. Is there something else I need to tweak? Sorry if this is getting a bit long-winded and boring. Really appreciate your time and the step-by-step help. pettifoggery's Profile: http://forums.slimdevices.com/member.php?userid=69041 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Based on the kernel, he is using 4.1.0 piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://www.picoreplayer.org Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Now go to the pCP web interface and choose Squeezelite - and then from the "Audio settings" section at the top choose "USB Audio" and hit save. It should then ask to reboot ... to which you should say yes. Then, when it comes back, go to the same place and pick one of the listed USB audio devices. If the first does not work ... try one of the others ... and repeat until working. Also - I see that your USB speakers registered a "HID" device (human interface) ... so there is a good chance that the remote control that came with it will work. Also we are in the pCP 3.00 thread here ... but hopefully you are running pCP 4.something Paul Webster http://dabdig.blogspot.com Author Radio France (FIP etc) plugin Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Paul Webster wrote: > You could check to see if they are discovered as a USB device during the > boot phase. > For example - from SSH session > dmesg | grep -i usb > > or from the web UI in Beta mode - go to the Diagnostics page and look > for dmesg and the scroll through that (or Copy/Paste into a text editor > and search it for "usb" without quotes) The ssh reports that it's there. But I'm not sure what to do next. Which if any of the Audio output device settings should I select? Details pasted below. Should mention that the Pi2 also has a memory stick and usb bluetooth attached. [0.00] Kernel command line: bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f00 vc_mem.mem_size=0x3f60 tz=GMT0BST,M3.5.0/1,M10.5.0 dwc_otg.fiq_fsm_mask=0xF host=piCorePlayer dwc_otg.lpm_enable=0 console=tty1 root=/dev/ram0 elevator=deadline rootwait quiet nortc loglevel=3 noembed smsc95xx.turbo_mode=N noswap consoleblank=0 waitusb=2 [0.055644] usbcore: registered new interface driver usbfs [0.055693] usbcore: registered new interface driver hub [0.055803] usbcore: registered new device driver usb [0.492800] usbcore: registered new interface driver lan78xx [0.492860] usbcore: registered new interface driver smsc95xx [0.520772] dwc_otg 3f98.usb: base=0xf098 [0.921924] dwc_otg 3f98.usb: DWC OTG Controller [0.921957] dwc_otg 3f98.usb: new USB bus registered, assigned bus number 1 [0.921991] dwc_otg 3f98.usb: irq 62, io mem 0x [0.922253] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002 [0.922262] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1 [0.922269] usb usb1: Product: DWC OTG Controller [0.922275] usb usb1: Manufacturer: Linux 4.14.81-pcpCore_v7 dwc_otg_hcd [0.922281] usb usb1: SerialNumber: 3f98.usb [0.922897] hub 1-0:1.0: USB hub found [0.923715] usbcore: registered new interface driver usb-storage [0.927053] usbcore: registered new interface driver usbhid [0.927057] usbhid: USB HID core driver [1.371750] usb 1-1: new high-speed USB device number 2 using dwc_otg [1.612126] usb 1-1: New USB device found, idVendor=0424, idProduct=9514 [1.612142] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [1.612868] hub 1-1:1.0: USB hub found [1.931790] usb 1-1.1: new high-speed USB device number 3 using dwc_otg [2.061926] usb 1-1.1: New USB device found, idVendor=0424, idProduct=ec00 [2.061941] usb 1-1.1: New USB device strings: Mfr=0, Product=0, SerialNumber=0 [2.154846] smsc95xx 1-1.1:1.0 eth0: register 'smsc95xx' at usb-3f98.usb-1.1, smsc95xx USB 2.0 Ethernet, b8:27:eb:24:8c:30 [2.251678] usb 1-1.4: new high-speed USB device number 4 using dwc_otg [2.382185] usb 1-1.4: New USB device found, idVendor=0781, idProduct=5571 [2.382195] usb 1-1.4: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [2.382202] usb 1-1.4: Product: Cruzer Fit [2.382208] usb 1-1.4: Manufacturer: SanDisk [2.382215] usb 1-1.4: SerialNumber: 4C530101230213104272 [2.382901] usb-storage 1-1.4:1.0: USB Mass Storage device detected [2.384327] scsi host0: usb-storage 1-1.4:1.0 [2.481680] usb 1-1.5: new full-speed USB device number 5 using dwc_otg [2.629184] usb 1-1.5: New USB device found, idVendor=0a5c, idProduct=21e8 [2.629194] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [2.629201] usb 1-1.5: Product: BCM20702A0 [2.629207] usb 1-1.5: Manufacturer: Broadcom Corp [2.629213] usb 1-1.5: SerialNumber: 000272CC9CD2 [2.931678] usb 1-1.2: new full-speed USB device number 6 using dwc_otg [3.072936] usb 1-1.2: New USB device found, idVendor=210a, idProduct=a410 [3.072946] usb 1-1.2: New USB device strings: Mfr=1, Product=2, SerialNumber=0 [3.072953] usb 1-1.2: Product: PAAD cubik [3.072959] usb 1-1.2: Manufacturer: PAAD cubik [3.078794] input: PAAD cubik PAAD cubik as /devices/platform/soc/3f98.usb/usb1/1-1/1-1.2/1-1.2:1.2/0003:210A:A410.0001/input/input0 [3.141922] hid-generic 0003:210A:A410.0001: input,hidraw0: USB HID v1.00 Device [PAAD cubik PAAD cubik ] on usb-3f98.usb-1.2/input2 [ 14.587801] usbcore: registered new interface driver snd-usb-audio [ 14.589679] usbcore: registered new interface driver btusb pettifoggery's Profile: http://forums.slimdevices.com/member.php?userid=69041 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
pettifoggery wrote: > I have a pair of 'Palo Alto Cubik speakers' > (http://www.paloaltoaudio.com/cubik/) with an internal DAC. These active > speakers would be a great fit for my workshop hi-fi but I just can't get > them to work with PiCorePlayer. > > The now defunct Palo Alto didn't provide any information about the DAC > or other internals. Which I know isn't helpful. Though I can get them to > work perfectly with my PC (Elementary OS Juno) and Volumio on a Pi2 & > Cubox-i. Which might be a place to start. > > Any ideas or suggestions? > You could check to see if they are discovered as a USB device during the boot phase. For example - from SSH session dmesg | grep -i usb or from the web UI in Beta mode - go to the Diagnostics page and look for dmesg and the scroll through that (or Copy/Paste into a text editor and search it for "usb" without quotes) Paul Webster http://dabdig.blogspot.com Author Radio France (FIP etc) plugin Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I have a pair of 'Palo Alto Cubik speakers' (http://www.paloaltoaudio.com/cubik/) with an internal DAC. These active speakers would be a great fit for my workshop hi-fi but I just can't get them to work with PiCorePlayer. The now defunct Palo Alto didn't provide any information about the DAC or other internals. Which I know isn't helpful. Though I can get them to work perfectly with my PC (Elementary OS Juno) and Volumio on a Pi2 & Cubox-i. Which might be a place to start. Any ideas or suggestions? Thanks Robert pettifoggery's Profile: http://forums.slimdevices.com/member.php?userid=69041 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
firedog wrote: > Hi- > My picoreplayer is a Rasperry Pi 3B+ > > Everything works great except: the clock displays a time 3hours earlier > than my actual time. If I change the time zone in settings it has no > effect. The same time issue remains (3 hours early). > I have other SB devices running on the same network and with the same > LMS server, and they all display the correct time. > Any ideas how to fix this? > > Maybe jivelite can have the "timezone" function added in to the menus - > just like on the original SBT. This was solved in 4.00 thread GIK Acoustics Room Treatments. Isol Line conditioner/protection. iFi AC iPurifiers>CAPS4 Pipeline w/Sonore PS >Bricasti M5 network player>Kii Control>Kii Three speakers. Schiit Freya Pre for analog. SB Touch slaved to Empirical Audio Pace Car;SB Boom and SB Touch in additional rooms. C firedog's Profile: http://forums.slimdevices.com/member.php?userid=11550 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hi- My picoreplayer is a Rasperry Pi 3B+ Everything works great except: the clock displays a time 3hours earlier than my actual time. If I change the time zone in settings it has no effect. The same time issue remains (3 hours early). I have other SB devices running on the same network and with the same LMS server, and they all display the correct time. Any ideas how to fix this? Maybe jivelite can have the "timezone" function added in to the menus - just like on the original SBT. GIK Acoustics Room Treatments. Isol Line conditioner/protection. iFi AC iPurifiers>CAPS4 Pipeline w/Sonore PS >Bricasti M5 network player>Kii Control>Kii Three speakers. Schiit Freya Pre for analog. SB Touch slaved to Empirical Audio Pace Car;SB Boom and SB Touch in additional rooms. C firedog's Profile: http://forums.slimdevices.com/member.php?userid=11550 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Dear Greg and all, First of all, thank you for making piCorePlayer such a great player. I tried other audioplayers on my Raspberry Pi, but this one beats them in terms of stability and speed! Recently I bought a X6000K-7.1CH to for a multi-room audio from piCorePlayer. Seems like a great card with 8 outputs. I would like to send 8 channels over HDMI to the X6000, but the current implementation of BCM2835 limits the number of channels that can be send over HDMI to 2. The BCM2835 would need to be patched as follows: url in next post Note that the change that I refer to contains additional commits, but according to what I read, this is the minimum needed to get 8 channels to work. How could I apply this change? Thanks! spyder's Profile: http://forums.slimdevices.com/member.php?userid=68751 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
FAF wrote: > SOLVED! > I will test a new HDD tomorrow. It does not make any sense. Could be > that the HDD is a dud. > /FAF Hi again. I changed the HDD with another one and it works as intended. The HDD-ext4 is now mounting as it should. LMS is scanning now. Thank you for this wonderful brainchild! cya /FAF FAF's Profile: http://forums.slimdevices.com/member.php?userid=10716 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Greg Erskine wrote: > > Obviously this should be a "no brainer" and I can't see a problem with > what you have done. > regards > Greg Hi Greg Thx. Yeah.. will pop in another HDD tomorrow. The USB-HDD is powered though, I use a notebook supply 3.16A to power the unit (x800). I will test a new HDD tomorrow. It does not make any sense. Could be that the HDD is a dud. Thank you for your answer. /FAF FAF's Profile: http://forums.slimdevices.com/member.php?userid=10716 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
hi FAF, Obviously this should be a "no brainer" and I can't see a problem with what you have done. Mine current HDDs always work. Are you using a Powered USB HDD? I had a problem once where the drive would sometimes mount properly but often mount "readonly". I moved on to a different HDD assuming that the RPi I was using at the time wasn't supplying enough current to spin up this non-powered USB HDD reliably. Hopefully someone comes sees something I may have missed. :) regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hi I'm trying to mount a USB disk from the UI. I get the error Error Mount I have used FDISK to partition the HDD as EXT4. No problems there. I have made a Chwon for TC at the CLI. I have "Set Write Persmission" at the UI. Same thing. I have tried all I can think of, including repartitioning the HDD on another Raspbian boot. I have the HDD attached on a X800 from Subtronics: http://www.suptronics.com/miniPCkits/x800.html - it's mounted as USB. The HDD is recognized as SDA and I have made the partition on SDA2. I also tried SDA1 but this will not work, correct? Any ideas? /FAF thx FAF's Profile: http://forums.slimdevices.com/member.php?userid=10716 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I've always wondered about that 'wife's tale'. I thought it would go like - server feeds data to network, data gets transmitted, packets arrive, sorted, buffered, enter play back stream independent of server 'speed/timing' ? anyway, i know that's a discussion for other parts of the forums, so I'll just say thanks for the pCP images. I'm happy with one, so you guys spoil us with choice ;) rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 + HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8 | huxmut's Profile: http://forums.slimdevices.com/member.php?userid=65108 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
That's funny Huxmut. Perhaps I should only advertise that image on the audiophile websites. Wifi is a 4 letter word over there If you don't know what to choose, then you don't need the audio kernel version. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://sites.google.com/site/picoreplayer/home Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hey devs, Audio version needs to be renamed to Kernal Latency Tweak with Reduced Functionality (KLTRF) version @liffy99, the audio version doesnt play nice with wifi and other things. Reflash using the normal version and wifi will be easy. Just remember the limitation on special characters in the wifi password :) rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 + HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8 | huxmut's Profile: http://forums.slimdevices.com/member.php?userid=65108 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
What is the difference / advantage with the 'Audio' version 3.5 ? I naturally opted for that as I only play music via the RPI/Picoreplayer. liffy99's Profile: http://forums.slimdevices.com/member.php?userid=7832 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > I'm assuming you tried to reboot after saving.. Please move this to > the this thread. > https://forums.slimdevices.com/showthread.php?108852-Announce-piCorePlayer-3-5-0 > > When you do, please switch to beta mode, then there will be a > diagnostics button on the page. Please post the contents of the dmesg > section and the loaded modules. OK, just to recap, this is with the RPI3+Allo Digione connected via ethernet cable (I cannot manage to connect via wifi). DMSEG Section : [0.00] Booting Linux on physical CPU 0x0 [0.00] Linux version 4.14.26-rt19-pcpAudioCore_v7 (paul@NUC-Devel) (gcc version 4.9.3 (crosstool-NG crosstool-ng-1.22.0-88-g8460611)) #1 SMP PREEMPT RT Wed Mar 14 23:23:12 EDT 2018 [0.00] CPU: ARMv7 Processor [410fd034] revision 4 (ARMv7), cr=10c5383d [0.00] CPU: div instructions available: patching division code [0.00] CPU: PIPT / VIPT nonaliasing data cache, VIPT aliasing instruction cache [0.00] OF: fdt: Machine model: Raspberry Pi 3 Model B Rev 1.2 [0.00] Memory policy: Data cache writealloc [0.00] cma: Reserved 8 MiB at 0x3dc0 [0.00] On node 0 totalpages: 255488 [0.00] free_area_init_node: node 0, pgdat 80c832c0, node_mem_map bd336000 [0.00] Normal zone: 2246 pages used for memmap [0.00] Normal zone: 0 pages reserved [0.00] Normal zone: 255488 pages, LIFO batch:31 [0.00] percpu: Embedded 18 pages/cpu @be59b000 s41600 r8192 d23936 u73728 [0.00] pcpu-alloc: s41600 r8192 d23936 u73728 alloc=18*4096 [0.00] pcpu-alloc: [0] 0 [0] 1 [0] 2 [0] 3 [0.00] Built 1 zonelists, mobility grouping on. Total pages: 253242 [0.00] Kernel command line: 8250.nr_uarts=1 bcm2708_fb.fbwidth=656 bcm2708_fb.fbheight=416 bcm2708_fb.fbdepth=16 bcm2708_fb.fbswap=1 vc_mem.mem_base=0x3f00 vc_mem.mem_size=0x3f60 tz=GMT0BST,M3.5.0/1,M10.5.0 dwc_otg.fiq_fsm_mask=0xF host=piCorePlayer dwc_otg.lpm_enable=0 console=tty1 root=/dev/ram0 elevator=deadline rootwait quiet nortc loglevel=3 noembed smsc95xx.turbo_mode=N noswap cron consoleblank=0 waitusb=2 [0.00] PID hash table entries: 4096 (order: 2, 16384 bytes) [0.00] Dentry cache hash table entries: 131072 (order: 8, 1048576 bytes) [0.00] Inode-cache hash table entries: 65536 (order: 6, 262144 bytes) [0.00] Memory: 986168K/1021952K available (7168K kernel code, 551K rwdata, 2048K rodata, 1024K init, 441K bss, 27592K reserved, 8192K cma-reserved) [0.00] Virtual kernel memory layout: [0.00] vector : 0x - 0x1000 ( 4 kB) [0.00] fixmap : 0xffc0 - 0xfff0 (3072 kB) [0.00] vmalloc : 0xbe80 - 0xff80 (1040 MB) [0.00] lowmem : 0x8000 - 0xbe60 ( 998 MB) [0.00] modules : 0x7f00 - 0x8000 ( 16 MB) [0.00] .text : 0x80008000 - 0x8080 (8160 kB) [0.00] .init : 0x80b0 - 0x80c0 (1024 kB) [0.00] .data : 0x80c0 - 0x80c89cd8 ( 552 kB) [0.00].bss : 0x80c90fd0 - 0x80cff6ac ( 442 kB) [0.00] SLUB: HWalign=64, Order=0-3, MinObjects=0, CPUs=4, Nodes=1 [0.00] ftrace: allocating 24758 entries in 73 pages [0.00] Preemptible hierarchical RCU implementation. [0.00] No expedited grace period (rcu_normal_after_boot). [0.00] Tasks RCU enabled. [0.00] NR_IRQS: 16, nr_irqs: 16, preallocated irqs: 16 [0.00] NO_HZ: Clearing 0 from nohz_full range for timekeeping [0.00] NO_HZ: Full dynticks CPUs: 1-3. [0.00] Offload RCU callbacks from CPUs: 1-3. [0.00] arch_timer: cp15 timer(s) running at 19.20MHz (phys). [0.00] clocksource: arch_sys_counter: mask: 0xff max_cycles: 0x46d987e47, max_idle_ns: 440795202767 ns [0.03] sched_clock: 56 bits at 19MHz, resolution 52ns, wraps every 4398046511078ns [0.09] Switching to timer-based delay loop, resolution 52ns [0.000145] Console: colour dummy device 80x30 [0.000159] console [tty1] enabled [0.000172] Calibrating delay loop (skipped), value calculated using timer frequency.. 38.40 BogoMIPS (lpj=192000) [0.000178] pid_max: default: 32768 minimum: 301 [0.000280] Mount-cache hash table entries: 2048 (order: 1, 8192 bytes) [0.000289] Mountpoint-cache hash table entries: 2048 (order: 1, 8192 bytes) [0.000785] Disabling memory control group subsystem [0.000834] CPU: Testing write buffer coherency: ok [0.001107] CPU0: thread -1, cpu 0, socket 0, mpidr 8000 [0.040064] Setting up static identity map for 0x10 - 0x10003c [0.080053] Hierarchical SRCU implementation. [0.160146] smp: Bringing up secondary CPUs ... [0.260593] CPU1: thread -1, cpu 1, socket 0, mpidr 8001 [0.360652] CPU2: thread -1, cpu 2, socket 0, mpidr 8002 [0.460745] CPU3: thread -1, cpu 3, socket 0, mpidr 8003
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I'm assuming you tried to reboot after saving.. Please move this to the this thread. https://forums.slimdevices.com/showthread.php?108852-Announce-piCorePlayer-3-5-0 When you do, please switch to beta mode, then there will be a diagnostics button on the page. Please post the contents of the dmesg section and the loaded modules. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://sites.google.com/site/picoreplayer/home Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Just bought a RPI3 / Allo Digione combo and have it running via ethernet. Audio version 3.5 of PCP fed from LMS on my IMac via router. I now need to move the RPI to a location without ethernet access so have tried to use the RPI's wifi facility, with no joy. Cannot see it on my router admin page at all. My PCP setup is; 24957 What am I doing wrong ? +---+ |Filename: picore.jpg | |Download: http://forums.slimdevices.com/attachment.php?attachmentid=24957| +---+ liffy99's Profile: http://forums.slimdevices.com/member.php?userid=7832 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > What version are you usingthis thread is for old versions. to be > honest I don't even remember driver issues from the 3.0 3.1 days. Sorry - this was the thread I found when I searched. I've just upgraded to 3.5.0. I'll just download and re-install. I guess insitu upgrade didn't work for me. Doesn't matter - the best bit of software around. amey01's Profile: http://forums.slimdevices.com/member.php?userid=11274 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
What version are you usingthis thread is for old versions. to be honest I don't even remember driver issues from the 3.0 3.1 days. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://sites.google.com/site/picoreplayer/home Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Srhombeus wrote: > [2.011571] usb 1-1.5: New USB device found, idVendor=2357, > idProduct=0109 > [2.011584] usb 1-1.5: New USB device strings: Mfr=1, Product=2, > SerialNumber=3 > [2.011593] usb 1-1.5: Product: 802.11n NIC > [2.011603] usb 1-1.5: Manufacturer: Realtek > [2.011612] usb 1-1.5: SerialNumber: 00e04c01 > . > > > Scanning.. > > No wifi devices found! > > Possible error: > > 1. USB wifi adapter missing - insert ada9pter. > 2. wifi drivers and firmware missing - reboot required. I have exactly the same issue. Wifi was working fine before upgrade. Not sure what's going on? (RPI 3) amey01's Profile: http://forums.slimdevices.com/member.php?userid=11274 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I want to fill a USB stick, mounted on my RPi 2 with music ready for our holiday next week. I've installed SAMBA and it's running and I can see the shared folder from my Windows and Mac machines, but any attempt to connect using tc as the username and my newly allocated password are rejected. This seems to be the most basic action, so I must have got something fundamentally wrong, but I really can't figure out what I've done wrong. jemhayward's Profile: http://forums.slimdevices.com/member.php?userid=55065 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
hi I have a small but irritating problem. Sound breaks/stops just before next song it happens i the end of the song (around 10 seconds before next song). I tried disable and enable Crossfade under LMS server settings in browser and did not work. hifiberry amp and piCorePlayer 3.11 Squeezelite v1.8.7-1052 Thanks CosyCat's Profile: http://forums.slimdevices.com/member.php?userid=6458 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Srhombeus wrote: > Is it possible for me to use dkms for this board? Is there a way that i > can do? DKMS won't work in pCP. You have to compile the kernel module manually. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > Yes, this is the TL-WN823Nv2 board which is currently not supported by > pCP (Nor is it supported by raspbian, unless you use DKMS) > > I'm not real interested in building another kernel module for this > board. Is it possible for me to use dkms for this board? Is there a way that i can do? Srhombeus's Profile: http://forums.slimdevices.com/member.php?userid=67976 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Srhombeus wrote: > > [2.011571] usb 1-1.5: New USB device found, idVendor=2357, > idProduct=0109 > Yes, this is the TL-WN823Nv2 board which is currently not supported by pCP (Nor is it supported by raspbian, unless you use DKMS) I'm not real interested in building another kernel module for this board. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > The full Dmesg output is on the Diagnostics Page from the main menu. > But there is a stripped version on the Wifi Diagnostics Page. We need > to see some of the information there.but also, have you checked this > page. > > http://picoreplayer.sourceforge.net/faq_wifi%20does_not_work.shtml [2.011571] usb 1-1.5: New USB device found, idVendor=2357, idProduct=0109 [2.011584] usb 1-1.5: New USB device strings: Mfr=1, Product=2, SerialNumber=3 [2.011593] usb 1-1.5: Product: 802.11n NIC [2.011603] usb 1-1.5: Manufacturer: Realtek [2.011612] usb 1-1.5: SerialNumber: 00e04c01 . Scanning.. No wifi devices found! Possible error: 1. USB wifi adapter missing - insert ada9pter. 2. wifi drivers and firmware missing - reboot required. Srhombeus's Profile: http://forums.slimdevices.com/member.php?userid=67976 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Srhombeus wrote: > Thanks,in diagnostics the chipset looks like realtek.I can see the usb > plugged in the information but it doesnt find the correct driver i > think.And where can i find the dmesg for additional information? The full Dmesg output is on the Diagnostics Page from the main menu. But there is a stripped version on the Wifi Diagnostics Page. We need to see some of the information there.but also, have you checked this page. http://picoreplayer.sourceforge.net/faq_wifi%20does_not_work.shtml paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > Vendors have been known to change chipsets, yet keep the same model > number. Need more information.Run wifi diagnostics. Also look in > dmesg for additional information Thanks,in diagnostics the chipset looks like realtek.I can see the usb plugged in the information but it doesnt find the correct driver i think.And where can i find the dmesg for additional information? Srhombeus's Profile: http://forums.slimdevices.com/member.php?userid=67976 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hi,i am using final version of picore but i cant use my new wifi adapter tp link wn823n . It's already written that its a supported model.I'll be happy if you can help me to solve this problem. Srhombeus's Profile: http://forums.slimdevices.com/member.php?userid=67976 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Thanks Paul. I did the update. It updated fine. Tried booting again with the monitor on and no luck. Thanks for the idea. It really isn't a big deal. Just a head scratcher. Have a great weekend, Howard paul- wrote: > Can you run from an ssh session > > pcp-update firmware-rpi3-wireless.tcz > > Let me know if it downloads an update? Howard Passman's Profile: http://forums.slimdevices.com/member.php?userid=16674 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Can you run from an ssh session pcp-update firmware-rpi3-wireless.tcz Let me know if it downloads an update? paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
O.K., I swapped inputs to no avail. However, that gave me another thought. I put the RPI in HDMI 1 and booted it. Again, it could not connect to the router. So I left it in HDMI 1 and restarted the RPI. As long as I switched ti to another input on the monitor before I let it time out on finding a router, it connected. So I'm still scratching my head... Howard Howard Passman wrote: > Thanks Steve, > > Sorry for the late reply. I've been preoccupied. > > I will certainly give your ideas a try. I did try moving the RPI around > a bit, but did not change inputs. I'll give that a shot today. I can't > understand why it worked for so long and then just up and changed, but > we'll see. > > Have a great day, > > Howard Howard Passman's Profile: http://forums.slimdevices.com/member.php?userid=16674 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Thanks Steve, Sorry for the late reply. I've been preoccupied. I will certainly give your ideas a try. I did try moving the RPI around a bit, but did not change inputs. I'll give that a shot today. I can't understand why it worked for so long and then just up and changed, but we'll see. Have a great day, Howard SteveLazer wrote: > Sounds to me (of course, I'm only a "junior" member ;) that the > problematic TV/monitor is emitting RF interference of some type, > disrupting the wifi signal just enough to prevent connection. I would > try booting up pCP with monitor powered on but 1) with TV/monitor > connected to different hdmi source and 2) with powered TV/monitor not > connected to any source. If either produces same result, than you can > eliminate pCP as the problem. Howard Passman's Profile: http://forums.slimdevices.com/member.php?userid=16674 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Howard Passman wrote: > I can live with this, but it is perplexing to me. Everything is the same > as it has been for about a year. Same RPI running piCorePlayer, hooked > to the same monitor using the HDMI output and using the same > router/access point. About a week ago I went to use it and it seemed > frozen. I tried to reboot and the wifi came up, but could not find the > access point. I brought it upstairs and tried it. It worked fine. > > I then changed access points/routers. Started it up. No problem. Took it > back downstairs and had the same problem. Eventually, I decided to try > it without the monitor hooked up and it works fine. I thought maybe it > needed a better power supply because of the HDMI, although I'm pretty > sure the HDMI is powered by the TV. Anyway, that didn't work either. > > I then wiped it and started again, which took several days thanks to > Souceforge :-) Tried it again...same behavior. I did try it with a > different monitor using the HDMI output and it worked fine. I am > scratching my head and don't know exactly where else to look. > > In a nut shell, everything loads normally, WiFi comes up and starts > looking for the access point. It goes through the three tries and never > connects. If I boot it and turn the monitor off before it gets tot he > third try,or any point before that, it boots fine and connects to WiFi. > > As I said, not a big deal, just perplexing. > > Using all of the latest software on a original RPI Bwith a HiFiBerry RCA > DAC attached. > > Thanks again, > > Howard Sounds to me (of course, I'm only a "junior" member ;) that the problematic TV/monitor is emitting RF interference of some type, disrupting the wifi signal just enough to prevent connection. I would try booting up pCP with monitor powered on but 1) with TV/monitor connected to different hdmi source and 2) with powered TV/monitor not connected to any source. If either produces same result, than you can eliminate pCP as the problem. SteveLazer's Profile: http://forums.slimdevices.com/member.php?userid=67202 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I can live with this, but it is perplexing to me. Everything is the same as it has been for about a year. Same RPI running piCorePlayer, hooked to the same monitor using the HDMI output and using the same router/access point. About a week ago I went to use it and it seemed frozen. I tried to reboot and the wifi came up, but could not find the access point. I brought it upstairs and tried it. It worked fine. I then changed access points/routers. Started it up. No problem. Took it back downstairs and had the same problem. Eventually, I decided to try it without the monitor hooked up and it works fine. I thought maybe it needed a better power supply because of the HDMI, although I'm pretty sure the HDMI is powered by the TV. Anyway, that didn't work either. I then wiped it and started again, which took several days thanks to Souceforge :-) Tried it again...same behavior. I did try it with a different monitor using the HDMI output and it worked fine. I am scratching my head and don't know exactly where else to look. In a nut shell, everything loads normally, WiFi comes up and starts looking for the access point. It goes through the three tries and never connects. If I boot it and turn the monitor off before it gets tot he third try,or any point before that, it boots fine and connects to WiFi. As I said, not a big deal, just perplexing. Using all of the latest software on a original RPI Bwith a HiFiBerry RCA DAC attached. Thanks again, Howard Can I go home now? Howard Passman's Profile: http://forums.slimdevices.com/member.php?userid=16674 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
ralphy wrote: > Are you still running picoreplayer 3.0n? > > If so, you need to upgrade to 3.22 but make sure sourceforge is actually > up before you try and install the latest jivelite from the web gui > tweaks page. Finally able to access sourceforge (wow, multi-day outage), and yes, verified running latest version on pCP. I also tested jivelite windows, and it exhibits exactly the same problems of no play prompts. Seems prompt function is disabled/deleted in all jivelite flavors. :-( SteveLazer's Profile: http://forums.slimdevices.com/member.php?userid=67202 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
SteveLazer wrote: > Does anyone know how I can get my piCorePlayer to display the play > prompts that are supposed to appear when Defeat Destructive Play is in > effect? This problem also seems related to another - partially played > podcasts will not play. I finally figured out this was because a select > prompt for partially played podcasts is not appearing on piCorePlayer > touch screen, causing endless wait in LMS server for input on the > un-displayed Play from Last Position/Beginning prompt. However if I > control piCorePlayer remotely (Orange Squeeze android app or Squeezebox > Touch), it works properly, but not with piCorePlayer's resident JiveLite > controller. Seems like a particular prompt function was disabled in > jivelite code. > > Any help would be appreciated! > > Thanks, > Steve Are you still running picoreplayer 3.0n? If so, you need to upgrade to 3.22 but make sure sourceforge is actually up before you try and install the latest jivelite from the web gui tweaks page. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Does anyone know how I can get my piCorePlayer to display the play prompts that are supposed to appear when Defeat Destructive Play is in effect? This problem also seems related to another - partially played podcasts will not play. I finally figured out this was because a select prompt for partially played podcasts is not appearing on piCorePlayer touch screen, causing endless wait in LMS server for input on the un-displayed Play from Last Position/Beginning prompt. However if I control piCorePlayer remotely (Orange Squeeze android app or Squeezebox Touch), it works properly, but not with piCorePlayer's resident JiveLite controller. Seems like a particular prompt function was disabled in jivelite code. Any help would be appreciated! Thanks, Steve SteveLazer's Profile: http://forums.slimdevices.com/member.php?userid=67202 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
shaunm wrote: > I tried those instructions, but it didn't really work. It does try to > play but with 60% juddering and hissing. You can check if you followed the instructions correctly by looking at WebUI Settings/Advanced/Filetypes and look at the entries for "Windows Media" and "WMA Lossless" bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
shaunm wrote: > > Should I have installed pcp-ffmpeg.tcz or ffmpeg.tcz ? Worked really well for me. Don't forget to set the source of extensions to the piCorePlayer sourceforge repository. You'll need pcp-ffmpeg.tcz and pcp-lame.tcz. Don't forget the pcp bu when you're in linux. majones's Profile: http://forums.slimdevices.com/member.php?userid=13029 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Thanks for the replies. I tried those instructions, but it didn't really work. It does try to play but with 60% juddering and hissing. Should I have installed pcp-ffmpeg.tcz or ffmpeg.tcz ? Just to confirm, I am using a Squeezebox Classic, and only want to use LMS on the Raspberry Pi (not the player) Thanks in advance. shaunm's Profile: http://forums.slimdevices.com/member.php?userid=11987 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
This was 'discussed on the pcp 3.20 thread for wma files' (http://forums.slimdevices.com/showthread.php?107352-Announce-piCorePlayer-3-20=906130=1#post906130). For wma lossless files you'll need to change wma to wmal or if you want support for both formats duplicate the contents and modified the copied lines to use wmal. Ralphy *1*-Touch, *5*-Classics, *3*-Booms, *1*-UE Radio 'Squeezebox client builds' (https://sourceforge.net/projects/lmsclients/files/) 'donations' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=LL5P6365KQEXN=CA_name=Squeezebox%20client%20builds_code=USD=PP%2dDonationsBF%3abtn_donate_SM%2egif%3aNonHosted) always appreciated. ralphy's Profile: http://forums.slimdevices.com/member.php?userid=3484 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Squeezebox classic does not support WMA lossless so it needs a trasnscoder for the WMA Lossless filetype "wmal". The default LMS transcode is wmadec which is a Windows only application. Unless pcp supplies a custom-convert.conf file with filetype wmal set up to use ffmpeg instead of wmadec - it will need to be added to the pcp based LMS. The error "Couldn't create command line for wmal playback for [file name]" relates to the missing transcoder set up for the "wmal" filetype in convert.conf and any custom-convert.conf file. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I should have picked this up the first time. Download pcp-ffmpeg.tcz from the picoreplayer sourceforge repo. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > Likely the filesystem is running out of space when downloading expat2. > Have you expanded your filesystem? Hi Paul, thanks for the reply, yes have expanded the filesystem: FilesystemSize Used Available Use% Mounted on /dev/mmcblk0p2 14.3G182.4M 13.6G 1% /mnt/mmcblk0p2 shaunm's Profile: http://forums.slimdevices.com/member.php?userid=11987 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Likely the filesystem is running out of space when downloading expat2. Have you expanded your filesystem? paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Thanks for awesome work on this project. I am trying to use the PiCorePlayer as just a LMS with a Raspberry Pi Zero W, which my Squeezebox classic connects to. I've set everything else up perfectly and easily due to the great instructions (thanks!) except playing wmal files. 1. LMS with Squeezebox I've spent all day trying, I can play: mp3 wav mpeg-4 wma BUT, cannot play wmal (wma lossless) get this error: Slim::Player::Song::open (409) Error: Couldn't create command line for wmal playback for [file name] Unfortunately 75% of music collection (27,000 songs) is wmal. I've read it's a windows codec for WMAL, so is it simply the case you cannot play WMAL files in LMS? 2. Just to check, I tried the built-in Squeezelite player and it does play WMAL all be it with juddering and hissing (hdmi out) 3. I don't know if this what I'm missing, but I tried to load the extension ffmpeg.tcz but it failed with this message: Downloading: expat2.tcz Error on expat2.tcz 4. I loaded the extension ffmpeg-doc.tcz and restarted but didn't seem to do anything. An help would be appreciated. All I'm looking to do is for LMS to work with my Squeezebox Classic, playing WMAL files Thanks in advance, shaunm's Profile: http://forums.slimdevices.com/member.php?userid=11987 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hello everybody, I am using a RPi 3 with an i-Sabre DAC from Audiophonics and a 5" 800x480 capacitive Touchscreen I found on Amazon. Everything works like a charm thanks to the great system you put together in piCorePlayer. The only thing that does not work is the alignment in the touch function... the mouse is nowhere near my finger in Jivelite. When I load Rasbian though, alignment is perfect. This is the Touchscreen I use: wiki.52pi.com/index.php/5-Inch-800x480-Capacitive-Touch-Screen_SKU:_EP-0081 You have to edit /boot/config.txt to get the resolution right, which I did successfully. They are talking about a shellscript and drivers on the page which I wasn't able to load because I wouldn't know how to do that in TCE. I would really appreciate any help with the touchscreen function. Thanks so much in advance. JM Jayamh's Profile: http://forums.slimdevices.com/member.php?userid=67761 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
ryangodammit wrote: > I'm struggling to track down any info on what keys are used within > jivelite and how to change them. See other recent thread - I have replied with links. Paul Webster http://dabdig.blogspot.com Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
huxmut wrote: > Not sure if wireless is a necessity ? but if wired is an option you > could run two Pis in sync > if wireless is a requirement you could still do what Paul has suggested > and run Jivelite, but i dont know how youd go for a display at that > point in time ? > other than that i'm no more help :) Thanks. I've kind of done away with the idea of having a display but would still like to make a controller based on a wireless keyboard but I'm struggling to track down any info on what keys are used within jivelite and how to change them. ryangodammit's Profile: http://forums.slimdevices.com/member.php?userid=67252 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Not sure if wireless is a necessity ? but if wired is an option you could run two Pis in sync if wireless is a requirement you could still do what Paul has suggested and run Jivelite, but i dont know how youd go for a display at that point in time ? other than that i'm no more help :) rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 + HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8 | huxmut's Profile: http://forums.slimdevices.com/member.php?userid=65108 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
huxmut wrote: > slimmer is what your looking for > 20x4, 20x2 or 16x2 lcd with a rotary encoder and a couple of buttons > http://forums.slimdevices.com/showthread.php?105819-Announce-Slimmer That's exactly what I originally wanted to create but how I've ended up designing my multiroom setup means the pi's are a considerable distance from where I will be when controlling them. So I either need to extend the pins by about 10 meters and run them through multiple walls, or go wireless. I think I can make the controls work using a wireless keyboard, but no idea how to do a display ryangodammit's Profile: http://forums.slimdevices.com/member.php?userid=67252 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
ryangodammit wrote: > > While I'm on it, anyone have any cunning ideas to give my control pad a > text display? Could go full blown tablet for wireless, but I love the > simplicity of text. Anyway I could get the info via bluetooth or even > via the wireless keyboard dongle? Or am I pissing in the wind? slimmer is what your looking for 20x4, 20x2 or 16x2 lcd with a rotary encoder and a couple of buttons http://forums.slimdevices.com/showthread.php?105819-Announce-Slimmer rPi 3 + rasPi 7" LCD + HiFiBerry DiGi+ | rPi 2 + IQaudio DAC+ |rPi 2 + HiFiBerry DAC+ | Squeeze Box Touch | LMS + XPenology on HP Gen 8 | huxmut's Profile: http://forums.slimdevices.com/member.php?userid=65108 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > squeezelite doesn't have a keyboard interface. It can only work with > lirc. > > http://forums.slimdevices.com/showthread.php?105117-lirc-rpi-gpio-IR-support-for-picoreplayer=lirc > > Jivelite does have a keyboard control interface, but then you must be > running jivelite.. Oh, I've been mucking around on my microsoft wireless keyboard assuming it was controlling picoreplayer- so that's actually controlling jivelite? I suppose there's nothing wrong with that. Better than going the ir route as I'm trying to make a wall mounted control pad and it wont have line of sight. I'll search the jivelite thread to see what the keys are. While I'm on it, anyone have any cunning ideas to give my control pad a text display? Could go full blown tablet for wireless, but I love the simplicity of text. Anyway I could get the info via bluetooth or even via the wireless keyboard dongle? Or am I pissing in the wind? ryangodammit's Profile: http://forums.slimdevices.com/member.php?userid=67252 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
squeezelite doesn't have a keyboard interface. It can only work with lirc. http://forums.slimdevices.com/showthread.php?105117-lirc-rpi-gpio-IR-support-for-picoreplayer=lirc Jivelite does have a keyboard control interface, but then you must be running jivelite.. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I'm running picoreplayer on a raspberry pi 3 with a hifiberry amp 2. What are the keyboard controls and how do I configure them? Is it in squeezelite or picoreplayer? I want to butcher a wireless keyboard and make a controller with pause/play next/last track and volume using arcade machine buttons. Sorry for posting this earlier in a different thread, not really sure where to ask this Ryan ryangodammit's Profile: http://forums.slimdevices.com/member.php?userid=67252 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
hi Josh, As Paul said, usually there is no need for Server IP. Many years ago people used to always add this and it caused lots of support issues because some people where typing the IP incorrectly or mangling the port number. Once we convinced people not to do it, the problems went away, but. it should work. Tested OK on my system. Can you check your IP is correct under Server IP more help. Code: Connect to the specified LMS, otherwise autodiscovery will find the server (-s) less> [:] Default port: 3483 Note: Do not include the port number unless you have changed the default LMS port number. Current LMS IP is: 192.168.1.4 I have assumed you are using wired Ethernet and not wifi? regards Greg Greg Erskine's Profile: http://forums.slimdevices.com/member.php?userid=7403 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Entering the server address on the squeezelite page does nothing for you, unless you have 2 LMS servers in your environment. If you can ssh in, post your config.it is located at /usr/local/sbin/config.cfg. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > What is the first configuration change you try to make? Can you take a > screen shot just before you hit the submit/set button? > > I would suspect a bad SD card. OK - here's the weirdness. 1. System is actually working, but still can't access the webpage for the player. I am able to change the audio player (Hifi Berry +) and reboot successfully. Then when I add the IP# of the server (wanted to eliminate the DNS variable) and declare the max bit rate and reboot again, the page won't load. However, it is running. 2. I tried 3 different SD cards and even another Pi that I have and no change to the issue. 3. Is there anything that I can look at by SSHing into the Pi? Thanks Josh guttapercha's Profile: http://forums.slimdevices.com/member.php?userid=67652 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
What is the first configuration change you try to make? Can you take a screen shot just before you hit the submit/set button? I would suspect a bad SD card. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
guttapercha wrote: > No - literally the webserver on the Pi to access the configuration. > cgi-bin/about.cgi is the landing page for the picoreplayer. It will not > load anymore after I make the first configuration change.. > > Thanks, > > Josh Sorry - I didn't answer the rest of your question. The ip address is dynamic but registered through gotdns guttapercha's Profile: http://forums.slimdevices.com/member.php?userid=67652 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > What do you mean by server? Your LMS server? Or Are you setting pCP > to a static up address? No - literally the webserver on the Pi to access the configuration. cgi-bin/about.cgi is the landing page for the picoreplayer. It will not load anymore after I make the first configuration change.. Thanks, Josh guttapercha's Profile: http://forums.slimdevices.com/member.php?userid=67652 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
What do you mean by server? Your LMS server? Or Are you setting pCP to a static up address? paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > The command line setup is only for network and wifi. What configuration > change are you making that prevents pCP from working? Thanks for the reply. Since I started from a new image, I need to enter my server IP, bitrate, and audio card info. I click to save the settings and squeeze restarts. All seems like it should work, but then the webpage for the server is inaccessible. Thanks, Josh guttapercha's Profile: http://forums.slimdevices.com/member.php?userid=67652 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
guttapercha wrote: > Hi all, > > Hoping to find some help with a new problem. I previously had a working > setup with v3.1. I had to change some options and > for some reason the interface won't load anymore. I went and flashed a > new sd card with 3.22 and then 3.2 and then back to 3.1 and the same > thing keeps happening. I can access cgi-bin/about.cgi on the first boot, > but then it is no longer accessible after the first "save" of a > configuration change. Browsers just hang on trying to load it. Even when > actually rebooting the Pi, it is no longer accessible. > > I figured I would try configuring through SSH, but after logging in, > typing "picoreplayer" didn't bring up any setup menu. > > Can anyone give me some direction? > > Thanks! > > Josh The command line setup is only for network and wifi. What configuration change are you making that prevents pCP from working? paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
guttapercha wrote: > > I figured I would try configuring through SSH, but after logging in, > typing "picoreplayer" didn't bring up any setup menu. > > Can anyone give me some direction? > Try typing setup (which is a script at from /usr/local/sbin/setup) However, I don't know if that will do what you want since usually no need to run it by hand. Paul Webster http://dabdig.blogspot.com Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hi all, Hoping to find some help with a new problem. I previously had a working setup with v3.1. I had to change some options and for some reason the interface won't load anymore. I went and flashed a new sd card with 3.22 and then 3.2 and then back to 3.1 and the same thing keeps happening. I can access cgi-bin/about.cgi on the first boot, but then it is no longer accessible after the first "save" of a configuration change. Browsers just hang on trying to load it. Even when actually rebooting the Pi, it is no longer accessible. I figured I would try configuring through SSH, but after logging in, typing "picoreplayer" didn't bring up any setup menu. Can anyone give me some direction? Thanks! Josh guttapercha's Profile: http://forums.slimdevices.com/member.php?userid=67652 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Paul Webster wrote: > Does the Linux version of the Waveinput LMS plugin work with pCP? > pCP has alsamixer ... > > Later ... I just tried it myself and Waveinput does work on pCP. The "Normal" waveinput plugin just does a "arecord" with the Alsa device name after the "wavin:" to PCM output is then fed into LMS as per the usual rules into PCM or transcoded into Flac or MP3.So for Waveinput to work - you need to have a working Alsa subsystem, a valid device name and that LMS is running under a userid that can access the audio devices. bpa's Profile: http://forums.slimdevices.com/member.php?userid=1806 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I suggest starting a new thread - probably not a pCP one to get a wider audience. There might be some Linux tricks or maybe something with LiquidSoap (I think) to do it. Paul Webster http://dabdig.blogspot.com Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Nutkeg wrote: > > Couldn't some asound routing be a solution? Does the Linux version of the Waveinput LMS plugin work with pCP? pCP has alsamixer ... Paul Webster http://dabdig.blogspot.com Paul Webster's Profile: http://forums.slimdevices.com/member.php?userid=105 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > We donÂt support line in devices. But you can attach a usb CD player > to the rpi, and play with LMS, or rip the CD and save the files in your > LMS library. Hi Paul, thank you for your response. For all "non-real time" applications, the solutions you provided work perfectly fine. But sometimes I would like to plug a tablet or phone into the Pi's big speaker in order to improve audio quality while watching videos/TV (where audio/video being in sync is important) Couldn't some asound routing be a solution? Nutkeg's Profile: http://forums.slimdevices.com/member.php?userid=67586 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
We dont support line in devices. But you can attach a usb CD player to the rpi, and play with LMS, or rip the CD and save the files in your LMS library. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hi, I use Picoreplayer on a Pi 3 with a Hifiberry AMP2 in Mono output with LMS and Spotify. In order to have a line in function, I added a USB sound card. I would like to plug an external source via 3.5mm cable to play music from smartphone, CD player... The USB card's microphone input does play from the output of the USB card but not out of the Hifiberry. How can I route the audio from the USB card's microphone to the Hifiberry's output? Thank you in advance. Nutkeg Nutkeg's Profile: http://forums.slimdevices.com/member.php?userid=67586 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
BobSherman wrote: > Hi Paul, > > Thanks for the response, I will give it a shot. Its been a while > thinking back what I initially did to set it up, maybe I used the Wi-Fi > adapter in the A+? That would work and the script would load > automatically after adding extension? I also tried plugging the usb > fiber Ethernet adapter into the B2+ and it did not work either. > Shouldnt that have loaded properly? Thanks very much. > > Regards > Bob Bob, I did the same yesterday and used this link after doing the extension install Code: http://forums.slimdevices.com/showthread.php?107352-Announce-piCorePlayer-3-20=894847=1#post894847 It's the same as Scott's but if you look at post #571 there is some more background for general information. ronnie Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > When you use a different pi to setup, you need to use the same arch, as > the setup scripts only retrieve files for the current arch. > > So if you setup on a Model B (or B+) it would have worked. But the > rpi2B is a armv7 device, it did not work. > > > > Scott's notes will work. Hi Paul, Thanks for the response, I will give it a shot. Its been a while thinking back what I initially did to set it up, maybe I used the Wi-Fi adapter in the A+? That would work and the script would load automatically after adding extension? I also tried plugging the usb fiber Ethernet adapter into the B2+ and it did not work either. Shouldnt that have loaded properly? Thanks very much. Regards Bob BobSherman's Profile: http://forums.slimdevices.com/member.php?userid=62791 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
sckramer wrote: > Bob, > > Here are my ssh notes, ui does not work for me either: > > ###USB ETHERNET > anker gigabit usb > reboot > $ pcp br > check for the extension (net-usb-*) > $ ceo > $ ls > check if the extension is loaded on reboot > $ ce > $ cat onboot.lst > add net-usb-KERNEL.tcz to onboot.lst if needed > > $ vi onboot.lst > backup reboot > $ pcp br > > pcp-update net-usb-KERNEL.tcz > pcp-update wireless-KERNEL.tcz Hi Scott, Thanks for the help, its been a while. Ive been pretty much using what you suggested the A+. Im using a fiber adapter, I works really well. Ive been away for a bit, kind of a extended vacation but Im back and actually just picked up the allo board and I am impressed. Currently have it running in a B2 With regular ethernet, but will now work on the A+. I am still using a Modi multi-bit and the Allo board makes a clear difference vs the Digi+ Pro. Whats your current set up? Best regards Bob BobSherman's Profile: http://forums.slimdevices.com/member.php?userid=62791 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
When you use a different pi to setup, you need to use the same arch, as the setup scripts only retrieve files for the current arch. So if you setup on a Model B (or B+) it would have worked. But the rpi2B is a armv7 device, it did not work. Scott's notes will work. paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Bob, Here are my ssh notes, ui does not work for me either: ###USB ETHERNET anker gigabit usb reboot $ pcp br check for the extension (net-usb-*) $ ceo $ ls check if the extension is loaded on reboot $ ce $ cat onboot.lst add net-usb-KERNEL.tcz to onboot.lst if needed > $ vi onboot.lst backup reboot $ pcp br pcp-update net-usb-KERNEL.tcz pcp-update wireless-KERNEL.tcz Scott Kramer - 'AudioSystem' (http://bit.ly/2o2opXv) - 'YouTube' (http://bit.ly/1ULq4fT) - 'Twitter' (http://bit.ly/1q8dTgc) sckramer's Profile: http://forums.slimdevices.com/member.php?userid=20311 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > USB Ethernet modules are not included by default. > On the pCP web interface, go to the main tabalso make sure you > are in advanced mode. > > Select the extensions button. > On the extension page, the first drop down should be set to the Official > piCore Repo > In the second drop down, look for net-usb-4.4.20-piCore+.tcz > Then press the load button. > > That should take care of it for you Hi Paul, I have been happily using the player since, you helped me. :) I have run into a little issue now though. Still using A+ I am looking to use the latest player version because I will be now using the Allo DigiOne. Did the same thing and loaded the extension on a Pi2. When I plug the card into the A+ the usb network adapter does not come on. Am I missing something? Thanks Bob BobSherman's Profile: http://forums.slimdevices.com/member.php?userid=62791 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hi there, I'm not able to get the shairport working on 3.22 with HiFiBerry Amp's. I did the reinstal of shairport and did change to analog and back to the HifiBerry setting but no sound. The iDevice can connect and it is playing but i'll get no sound. Did I do wrong? Is there a special workaround? I'm glad for all help, thanks! palmerx's Profile: http://forums.slimdevices.com/member.php?userid=63498 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
sbp wrote: > Maybe you could try to disable the onboard analog sound card and then > reboot. Next try to enable equalizer. Paul, SBP, thanks you for the help. With this info I will continue to get all the parts sorted and enable PCP to support the Cirrus Logic Audio Card from the menus However I :-) might need some support and I do not want to hijack this thread for this card only. Let me ask the questions in the thread "Cirrus Logic Audio Card and Wolfson support in PCP 3.20" Greetz M-H M-H's Profile: http://forums.slimdevices.com/member.php?userid=66156 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
M-H wrote: > I've got a partially working .conf file for the Cirrus Logic Audio Card > I need to complete and test. > For this moment it shows up in the gui dropdown list, and after choosing > the new option and rebooting the set it comes up with a working setup. > However, adding the alsa equal breaks it and shows it needs some more > attention and testing. > I assume it is the alsa config to use the card > Is there any further info on the way this setup is designed and tips on > debugging ? > > If anyone is in a position to do the verification in parallel , here is > the clac.conf > > > Code: > > [COMMON] > ALSA_PARAMS="80:4::1" > GENERIC_CARD="RPiCirrus" > CONTROL_PAGE="soundcard_control.cgi" > LISTNAME="Cirrus Logic Audio Card" > RPI_MODEL="HAT_ALL_NO_HAT" > > [PCPAUDIOCORE] > DTOVERLAY="rpi-cirrus-wm5102" > CARD="RPiCirrus" > OUTPUT="hw:CARD=RPiCirrus" > > [PCPCORE] > DTOVERLAY="rpi-cirrus-wm5102" > CARD="RPiCirrus" > OUTPUT="hw:CARD=RPiCirrus" > > Maybe you could try to disable the onboard analog sound card and then reboot. Next try to enable equalizer. piCorePlayer a small player for the Raspberry Pi in RAM. Homepage: https://sites.google.com/site/picoreplayer/home *Please 'donate' (https://www.paypal.com/cgi-bin/webscr?cmd=_donations=U7JHY5WYHCNRU=GB_code=USD=PP%2dDonationsBF%3abtn_donateCC_LG%2egif%3aNonHosted) if you like the piCorePlayer* sbp's Profile: http://forums.slimdevices.com/member.php?userid=37237 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
When in the boot process does the card show up in Alsa. This is where we look for the cards names and numbers. /proc/asound/cards paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
I've got a partially working .conf file for the Cirrus Logic Audio Card I need to complete and test. For this moment it shows up in the gui dropdown list, and after choosing the new option and rebooting the set it comes up with a working setup. However, adding the alsa equal breaks it and shows it needs some more attention and testing. I assume it is the alsa config to use the card Is there any further info on the way this setup is designed and tips on debugging ? If anyone is in a position to do the verification in parallel , here is the clac.conf Code: [COMMON] ALSA_PARAMS="80:4::1" GENERIC_CARD="RPiCirrus" CONTROL_PAGE="soundcard_control.cgi" LISTNAME="Cirrus Logic Audio Card" RPI_MODEL="HAT_ALL_NO_HAT" [PCPAUDIOCORE] DTOVERLAY="rpi-cirrus-wm5102" CARD="RPiCirrus" OUTPUT="hw:CARD=RPiCirrus" [PCPCORE] DTOVERLAY="rpi-cirrus-wm5102" CARD="RPiCirrus" OUTPUT="hw:CARD=RPiCirrus" M-H's Profile: http://forums.slimdevices.com/member.php?userid=66156 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > Interesting, as I thought this card was not working. That is why we > never included a conf for it. > > There is a README in the directory, but it's probably easier to just > copy another and edit to suit your needs. The card is working, I use it in 2 systems. Hias did some great work on the driver, and it made it into the kernel. Loading the modules however is not error free, but I found a way to tweak it, and it just adds a few seconds extra setup time after boot. There is a thread on this forum to help people who are interested in that setup. Looking at soundcard_control.cgi it screems "start Wolfson chip config commands here!" where Analog / Digital / headphones / Speaker -output can be chosen with nice on/of buttons , and sliders to set volume for each independently. Yeah, I will work my way through the conf files, and see if I can post back the tested version. so 3 years after I bought the cards, and Cirrus giving up on their own product, it is finally becoming the perfect card for PCP builds. Too bad, they are no longer available to get a few extra. M-H's Profile: http://forums.slimdevices.com/member.php?userid=66156 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > What card are you using? Hi Paul, I am using the famous Cirrus Logic Audio Card. Aplay -l lists its as Code: card 1: RPiCirrus [RPi-Cirrus], device 0: WM5102 AiFi wm5102-aif1-0 [] Subdevices: 0/1 Subdevice #0: subdevice #0 And using Alsa Equal in combination with this card is needed in my situation ; to boost the low frequencies in a portable player. And as it it truly used portable, manual tweaking after each start when I need an extra synchronised player is not 'acceptable' A quick peek in /usr/local/etc/pcp/cards does confirm my card is one of the most rare exotic ones. But I assume it can be created now there is a system to recognise and configure them. Have you got any tips or templates to build support for this obvious omission ;-) ? Regards M-H M-H's Profile: http://forums.slimdevices.com/member.php?userid=66156 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
What card are you using? 3.21 introduced a change to automatically set the card number when using alsaequal. This change assists when cards are detected in different orders, or you disable the onboard sound after setting up alsaequal. This will not work if you are manually setting things up. If there is a card that we don't have a configuration for, then the best thing to do is to create a config file for your card. Take a look at /usr/local/etc/pcp/cards And yes alsaequal locks the output setting on the squeezelite page..remove alsa equal, or manually edit the config file. It's been that way since pCP 2.02 paul-'s Profile: http://forums.slimdevices.com/member.php?userid=58858 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Please help me to verify a bug or educate me what I'm missing Just upgraded from 3.20 to 3.22 via insitu upgrade. All went well except the to-be-expected omissions in the upgrade. So after I added the dtoverlay line in /mnt/mmcblk0p1/config.txt again, I backed up the changes and rebooted with "pcp br" and then reinstalled the ALSA 10 band Equalizer from the gui. Then I edited the /etc/asound.conf to point to my card, and tested alsa output to function OKE , after the Squeezelite restart. So it works , with the odd soundcard and equalizer as before. So far no surpises. But then the changes to /etc/asound.conf can not be retained over a system reboot. The backup does work, but it seems the restore is not done properly in the startup after a boot. Manually doing a "sudo filetool.sh -r" ( and Squeezelite restart ) proves the change is in the backup, and did not really lost it ;-) So what am I missing ? BTW the GUI field Squeezelite ; Output setting : "equal" is no longer editable, suggesting work done to prevent editing the needed settings for alsa equal after enabling. Greetz M-H M-H's Profile: http://forums.slimdevices.com/member.php?userid=66156 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Hi. I "upgrading" from the Squeezebox Touch to PI3 and would like to use pCP and ran into issues with getting the right USB setup for the Amanero USB module (connected to ES9018 DACchip). Are there a guide here in the forum on how to setup the Amanero USB module correctly or can somebody please share experience with USB setup / configuration? My setup are: Raspberry Pi3 with pCP3.22 installed. Wifi setup correct and music is playing from the onboard headphone output. LMS is running on a mac mini and running latest nightly 7.9.1 build. Best Regards Caad Caad's Profile: http://forums.slimdevices.com/member.php?userid=9350 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Picore 3.22 + LMS I built my parents the above setup, put the music on a usb HD and all was working fine for months. I took the HD home to rip their new cd's on to the the HD but since putting the HD back in and rescanning the media lms will only find the original music and not anything in the new directory's although from Squeezer, lms, etc can see the directory's but they just say empty. I built a new sd card bringing picore up to 3.22 from pre v3 as a test and the problem remains. Three new cd's and some flac, some mp3 none can be seen. I took a mp3 from a working directory and pasted it in and all players could see that song but still not the new music. and I have retested the music on the HD on three pc's and they can all play the music. All I can think is some sort of file permission issue that is stopping picore/lms accessing.any thoughts? Thanks a lot!!! hankmarvin's Profile: http://forums.slimdevices.com/member.php?userid=64136 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
Just completed a fresh download and install of v3.22 with LMS at 2130 hrs UK time Friday 29th:) Man in a van's Profile: http://forums.slimdevices.com/member.php?userid=43627 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
Re: [SlimDevices: Unix] Announce: piCorePlayer 3.00
paul- wrote: > There is a chance the failed downloads left a corrupted file in the > download directory > > open an ssh session to your pCP device. And run the following > > > Code: > > > ceo > rm -rf slimserver* > > > > > > Then try it again. there are 2 files left over, but deleting them didn't change anything.. jon_y's Profile: http://forums.slimdevices.com/member.php?userid=67394 View this thread: http://forums.slimdevices.com/showthread.php?t=105997 ___ unix mailing list unix@lists.slimdevices.com http://lists.slimdevices.com/mailman/listinfo/unix
