I get constantly asked to do a non penetrating mount. I have always resisted
because there are a ton of them out there already. But I get almost daily
searches for this term on my website. It appears folks presume I have one.
If I did one, I would like to have some feature or quality that d
Two things.
The one you mentioned about being switchable between flat and peaked roofs.
The second thing would be HDG. Almost every one of the "economy" ones
I've seen start rusting to pieces after a couple of years.
Maybe an easy way to change the mast size would be a plus. Some of the
ones
Subject: [AFMUG] Non penetrating mounts
I get constantly asked to do a non penetrating mount. I have always resisted
because there are a ton of them out there already. But I get almost daily
searches for this term on my website. It appears folks presume I have one.
If I did one, I would like to
How about Lego® style where you can add/remove parts to make it work for larger
& smaller setups…
Sincerely,
Joshaven Potter
Google Hangouts: j...@g2wireless.co
Cell & SMS: 1-517-607-9370
supp...@joshaven.com
> On Jan 9, 2016, at 1:05 PM, Chuck McCown wrote:
>
> I get constantly asked to do
Everything I do is HDG.
What mast sizes would be preferred?
From: Bill Prince
Sent: Saturday, January 9, 2016 11:19 AM
To: af@afmug.com
Subject: Re: [AFMUG] Non penetrating mounts
Two things.
The one you mentioned about being switchable between flat and peaked roofs.
The second thing would
To: af@afmug.com
Subject: [AFMUG] Non penetrating mounts
I get constantly asked to do a non penetrating mount. I have always resisted
because there are a ton of them out there already. But I get almost daily
searches for this term on my website. It appears folks presume I have one.
If
Hmmm, modular expandability. I like that.
From: Joshaven Mailing Lists
Sent: Saturday, January 9, 2016 11:26 AM
To: af@afmug.com
Subject: Re: [AFMUG] Non penetrating mounts
How about Lego® style where you can add/remove parts to make it work for larger
& smaller setups…
Since
OK...here goes...make the mast holder brace like ones on J arms with
degrees on it. Make wide enough to hold different diameter pipe. The screw
and bolt serves two purposes... hinge and anti rotation. So now you can
tilt mast as needed. The yoke will be wide enough to accommodate
different size
, 2016 11:36 AM
To: Animal Farm
Subject: Re: [AFMUG] Non penetrating mounts
OK...here goes...make the mast holder brace like ones on J arms with degrees on
it. Make wide enough to hold different diameter pipe. The screw and bolt
serves two purposes... hinge and anti rotation. So now you can tilt
build it for a competitive price. I know I played with the
> design a bit.
>
>
>
> *From:* Jaime Solorza
> *Sent:* Saturday, January 9, 2016 11:36 AM
> *To:* Animal Farm
> *Subject:* Re: [AFMUG] Non penetrating mounts
>
>
> OK...here goes...make the mast holder brace like
http://www.nytimes.com/video/movies/10003393598/the-mexican-scene-i-need-a-lift-in-your-el-trucko.html
From: Jaime Solorza
Sent: Saturday, January 9, 2016 11:57 AM
To: Animal Farm
Subject: Re: [AFMUG] Non penetrating mounts
No U bolts.. let me sketch it out...my English is not good. Ha
take J-pipes.
http://www.3starinc.com/non-pen_mounts_2.html
From: ch...@wbmfg.com
Sent: Saturday, January 09, 2016 12:45 PM
To: af@afmug.com
Subject: Re: [AFMUG] Non penetrating mounts
So you would want the mast holder to have U bolts? Then you supply your own
mast?
I looked at the wall brace
I was actually conjuring ways to modify a non penetrating mount with
extensions at the corners for extra leverage recently. Being able to buy
it versus designing it and finding someone to build it would be great.
On Sat, Jan 9, 2016 at 12:05 PM, Chuck McCown wrote:
> I get constantly asked to
mounts that
take J-pipes.
http://www.3starinc.com/non-pen_mounts_2.html
*From:* ch...@wbmfg.com <mailto:ch...@wbmfg.com>
*Sent:* Saturday, January 09, 2016 12:45 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Non penetrating mounts
So you would want the mast holder t
gt; *Sent:* Saturday, January 9, 2016 11:57 AM
> *To:* Animal Farm
> *Subject:* Re: [AFMUG] Non penetrating mounts
>
>
> No U bolts.. let me sketch it out...my English is not good. Ha
> On Jan 9, 2016 11:45 AM, wrote:
>
>> So you would want the mast holder to have U bo
.3starinc.com/non-pen_mounts_2.html
>
>
> *From:* ch...@wbmfg.com
> *Sent:* Saturday, January 09, 2016 12:45 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Non penetrating mounts
>
> So you would want the mast holder to have U bolts? Then you supply your
> own mast?
&g
Should not be a problem. Thanks
From: Jaime Solorza
Sent: Saturday, January 9, 2016 12:27 PM
To: Animal Farm
Subject: Re: [AFMUG] Non penetrating mounts
Che kit out see Holmes...orale
On Jan 9, 2016 11:45 AM, wrote:
So you would want the mast holder to have U bolts? Then you supply
AM
To: af@afmug.com
Subject: Re: [AFMUG] Non penetrating mounts
Is the 36 inch square base large enough?
Adjustment is easy to add.
Can you point me to the design that has the circular holder for the mast? Not
sure I am familiar with that.
From: Rory Conaway<mailto:r...@triadwireless.net>
;
To: af@afmug.com
Sent: Saturday, January 9, 2016 12:05:40 PM
Subject: [AFMUG] Non penetrating mounts
I get constantly asked to do a non penetrating mount. I have always resisted
because there are a ton of them out there already. But I get almost daily
searches for this term on my website. It app
Shack.
>
>
>
> Rory
>
>
>
> *From:* Af [mailto:af-boun...@afmug.com] *On Behalf Of *ch...@wbmfg.com
> *Sent:* Saturday, January 9, 2016 11:30 AM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Non penetrating mounts
>
>
>
> Is the 36 inch square base large enough
-
From: "jay weekley"
To: af@afmug.com
Sent: Saturday, January 9, 2016 1:40:46 PM
Subject: Re: [AFMUG] Non penetrating mounts
Who doesn't love carrying 50 pound sand bags up a ladder to the second floor?
Over and over.
On Sat, Jan 9, 2016 at 1:30 PM, Nate Burke <
OK, I understand the ring situation. I think I have a slightly better method.
From: Rory Conaway
Sent: Saturday, January 9, 2016 2:05 PM
To: af@afmug.com
Subject: Re: [AFMUG] Non penetrating mounts
I’ll have to take a picture of one at my office. The ones we bought on Amazon
have a four
I have been looking this stuff over, but I hate to knock off anybody. If I am
going to do something I have to add value or features or something.
From: Jaime Solorza
Sent: Saturday, January 9, 2016 2:07 PM
To: Animal Farm
Subject: Re: [AFMUG] Non penetrating mounts
You can get ideas from
Anything you can do to speed assembly but still take up less space. I never
liked how long they took to put together.
On Sat, Jan 9, 2016, 12:05 PM Chuck McCown wrote:
> I get constantly asked to do a non penetrating mount. I have always
> resisted because there are a ton of them out there alre
Yeah, that is always a problem. The more assembly you do during fabrication,
the more it costs to ship, the larger the packing crate is, the more expensive
packing is etc etc.
From: Lewis Bergman
Sent: Saturday, January 9, 2016 2:35 PM
To: af@afmug.com
Subject: Re: [AFMUG] Non penetrating
> *From:* Lewis Bergman
> *Sent:* Saturday, January 9, 2016 2:35 PM
> *To:* af@afmug.com
> *Subject:* Re: [AFMUG] Non penetrating mounts
>
> Anything you can do to speed assembly but still take up less space. I
> never liked how long they took to put together.
>
> On
e:
>
>> Yeah, that is always a problem. The more assembly you do during
>> fabrication, the more it costs to ship, the larger the packing crate is,
>> the more expensive packing is etc etc.
>>
>> *From:* Lewis Bergman
>> *Sent:* Saturday, January 9, 2016 2:35 PM
&
re it costs to ship, the larger the packing crate
is, the more expensive packing is etc etc.
*From:* Lewis Bergman <mailto:lewis.berg...@gmail.com>
*Sent:* Saturday, January 9, 2016 2:35 PM
*To:* af@afmug.com <mailto:af@afmug.com>
*Subject:* Re: [AFMUG] Non penetrating mounts
Anyth
at is always a problem. The more assembly you do during
> fabrication, the more it costs to ship, the larger the packing crate is,
> the more expensive packing is etc etc.
>
> *From:* Lewis Bergman
> *Sent:* Saturday, January 9, 2016 2:35 PM
> *To:* af@afmug.com
> *Subject
All great ideas.
From: Jeremy
Sent: Saturday, January 09, 2016 7:15 PM
To: af@afmug.com
Subject: Re: [AFMUG] Non penetrating mounts
(not for a 25g in the last example. That was just a good ballast ring example)
On Sat, Jan 9, 2016 at 7:12 PM, Jeremy wrote:
Just thinking out loud here
, 2016 10:50:12 AM
Subject: Re: [AFMUG] Non penetrating mounts
That Maxxwave has an add-on tray for peaks also. It says "Heavy guage
galvanized steel", doesn't appear powder coated. Pretty cool product.
http://www.balticnetworks.com/non-penetrating-roof-peak-tray.html
On Sun,
My two cents: It will be capital intensive, but build a product line of
robust larger sized (3'x4', 5'x5' and larger) non penetrating roof mounts
to compete with Baird, Rohn and Commscope (Andrew).
There is very little competition in the North American marketplace for
carrier-grade NPRMs aside fro
@afmug.com
Subject: Re: [AFMUG] Non penetrating mounts
My two cents: It will be capital intensive, but build a product line of robust
larger sized (3'x4', 5'x5' and larger) non penetrating roof mounts to compete
with Baird, Rohn and Commscope (Andrew).
There is very littl
com>
Sent: Sunday, January 10, 2016 7:38 PM
To: af@afmug.com<mailto:af@afmug.com>
Subject: Re: [AFMUG] Non penetrating mounts
My two cents: It will be capital intensive, but build a product line of robust
larger sized (3'x4', 5'x5' and larger) non penetrating roof mou
34 matches
Mail list logo