Although I have never used DPMA, I agree with Lonnie.
XML and LDAP work great with Astlinux using Yealink phones.
Regards
Michael Knill
On 26/3/18, 5:09 am, "Lonnie Abelbeck" wrote:
Hi Fernando,
I'm not aware of anyone using the DPMA module with Digium phones with
AstLinux.
I never used the DPMA with astlinux but when I used it with regular asterisk.
it seemed pretty CPU intensive esp when updates were being pushed / pulled..
dbus, avahi, mDNS were some of the things that it required to work.klougey at
best is how I found it.. im sure they ironed some of that op
Hi Fernando,
I'm not aware of anyone using the DPMA module with Digium phones with AstLinux.
I seem to recall the **propitiatory binary blob** (DPMA) module requires
"avahi" which we include by default, but I seem to remember some avahi
functionally requires "dbus" which we don't include by def
Got further:
Mar 25 10:09:57 pbx local0.warn asterisk[2277]: WARNING[9819]: loader.c:497 in
load_dynamic_module: Error loading module 'res_digium_phone.so':
/usr/lib/asterisk/modules/res_digium_phone.so: undefined symbol:
ast_msg_tech_register
Mar 25 10:09:57 pbx local0.warn asterisk[2277]: WAR
Hello team!
Do I have to create my own build to be able to use a Digium D65 Phone to be
able to use the DPMA module?
Has anybody out there done this?
I cant figure out how to load a Contact list without having this module :(
TIA!
--
Fernando Fuentes
ffuen...@darktcp.net
---
Hi Jean,
Thanks for the feedback.
Interesting both AstLinux 1.1.7 and 1.2.1 use the same DAHDI versions
dahdi-linux 2.8.0.1 and dahdi-tools 2.8.0.
The difference is AstLinux 1.1.7 uses Linux Kernel 2.6.35.14, while AstLinux
1.2.1 uses Linux Kernel 3.2.62.
It would be good to understand what i
Hi,
I have changed of astlinux release to 1.1.7. Dahdi et TDM410P are
running perfectly.
Thanks for your messages.
Best regards,
Jean
---
I am using astlinux-1.2.1 - Asterisk 11.14.2 on Soekris net5501. I have
a problem to
o run
this config (unless AstLinux's hardware requirements have gone through the
roof in the last four years).
Thanks
Tom
From: John Novack [mailto:jnov...@stromberg-carlson.org]
Sent: 17 May 2015 17:36
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] Digium T
*From:* Lonnie Abelbeck
*To:* AstLinux Users Mailing List
*Sent:* Saturday, May 16, 2015 2:37 PM
*Subject:* Re: [Astlinux-users] Digium TDM41
.-Christopher
From: Lonnie Abelbeck
To: AstLinux Users Mailing List
Sent: Saturday, May 16, 2015 2:37 PM
Subject: Re: [Astlinux-users] Digium TDM410P and astlinux-1.2.1 - Asterisk
11.14.2 on Soekris net5501
Jean,
Odd, but on my Atom boxes *without* such a card the wctdm24xxp module
Jean,
Odd, but on my Atom boxes *without* such a card the wctdm24xxp module loads
just fine...
--
pbx ~ # modprobe wctdm24xxp
pbx ~ # lsmod | grep wct
wctdm24xxp 75585 0
dahdi_voicebus 34585 1 wctdm24xxp
dahdi 177249 3 wctdm24xxp,dahdi_voicebus,dahdi_echoc
Hi,
I am using astlinux-1.2.1 - Asterisk 11.14.2 on Soekris net5501. I have
a problem to start Dahdi with A Digium TDM410P.
lspci
00:0e.0 Ethernet controller: Digium, Inc. Wildcard TDM410 4-port analog
card (rev 1)
dahdi_hardware
pci::00:0e.0 wctdm24xxp- d161:8005 Wildcard TDM410P
mo
el is creating the solid clock
> signal it needs to function...
>
> -Christopher
>
> --
> *From:* Lachlan Dunlop
> *To:* AstLinux Users Mailing List
> *Sent:* Thursday, May 9, 2013 9:05 PM
> *Subject:* [Astlinux-users] Digium card HDLC
internally..
this assures that the Nortel is creating the solid clock signal it needs to
function...
-Christopher
From: Lachlan Dunlop
To: AstLinux Users Mailing List
Sent: Thursday, May 9, 2013 9:05 PM
Subject: [Astlinux-users] Digium card HDLC errors
Lach,
If it is a practical swap for you, I would try testing an Atom Jetway board (or
similar) with either the geni586 or geni586-serial console firmware.
http://doc.astlinux.org/userdoc:documentation#generic_x86_boards
The net5501 may not be the issue, but it would not surprise me if it was.
Hi Lonnie
I am running a soekris 5501
Thx for the interest. I cannot find an answer searching around.
Lach
On Thursday, May 9, 2013, Lonnie Abelbeck wrote:
> Lachlan,
>
> May I ask what hardware AstLinux is running on, Jetway Dual Core Atom
> board, etc. .
>
> I suspect Digium will be the mos
Lachlan,
May I ask what hardware AstLinux is running on, Jetway Dual Core Atom board,
etc. .
I suspect Digium will be the most help here, though great to see you have
gotten so far. Possibly someone else here has T1/PRI experience.
Lonnie
On May 9, 2013, at 8:05 PM, Lachlan Dunlop wrote:
>
Hello,
I have a Nortel BCM50 phone system with a digital interface connected to
the telco through an Adtran. The current telco is Integra.
I am trying to replace the Adtran 600R with an Astlinux box with a Digium
Wildcard TE110P T1 card.
My goal is to provide phone service over SIP to the aster
I agree also. FreePBX is way too heavy/bloated for an appliance such as
astlinux is targeted at. I struggle a lot with getting any kind of
advanced dialplans to operate within the digium asterisk-gui, and we
have to document which customers have "broken GUI's" due to dialplan
magic underneath.
were pretty
efficient..
-Christopher
From: Lonnie Abelbeck
To: AstLinux Users Mailing List
Sent: Monday, December 17, 2012 6:14 PM
Subject: Re: [Astlinux-users] Digium Asterisk-GUI
While googling on this topic, I've found many posts that agree wit
While googling on this topic, I've found many posts that agree with you
Fernando, preferring the Digium Asterisk-GUI over FreePBX, and disappointed
about the lack of recent development on the Digium Asterisk-GUI.
Lonnie
On Dec 17, 2012, at 5:04 PM, Fernando Fuentes wrote:
> I disagree. The ma
I disagree. The main reason why I use astlinux is because is far from a bloated
GUI. I hope astlinux stays far away from this types of GUIs.
On Dec 17, 2012, at 3:31 PM, David Kerr wrote:
> I used to use the Asterisk-GUI, but while it is good to get started, it does
> not lend itself to sophis
, December 17, 2012 4:31 PM
Subject: Re: [Astlinux-users] Digium Asterisk-GUI
I used to use the Asterisk-GUI, but while it is good to get started, it does
not lend itself to sophisticated dialplans. So I have stopped using it and my
dialplans and conf files are now probably completely incompatible with
I used to use the Asterisk-GUI, but while it is good to get started, it
does not lend itself to sophisticated dialplans. So I have stopped using
it and my dialplans and conf files are now probably completely incompatible
with it. It also is clearly not getting much attention from Digium.
There a
Request for Info,
I know there are fans of the "Digium Asterisk-GUI" out here...
Anyone tried it under Asterisk 11 ? (no changes to the GUI have been made for
19 months)
Does it make sense to include the "Digium Asterisk-GUI" with Asterisk 11 builds
?
Note: You will have to use the Build Eng
Running AstLinux 0.7.3; 4 port Digium card with 4xFXO installed.
I haven't configured enough to test the card itself, but noticed the
error messages. Thanks Tom for mentioning you see that as well. I'll
update if I see any actual issues, or please feel free to send me
further information i
I've always had this sequence of errors with TDM410S in net5501s. Not aware
of adverse symptoms, but since all three are like this, I have no point of
comparison.
Tom
On 25 Oct 2010 05:48, "Darrick Hartman" wrote:
> Darryl,
>
> What version of AstLinux? Also, which analog card? 4, 8 or 24 port
>
Darryl,
What version of AstLinux? Also, which analog card? 4, 8 or 24 port
Digium card. Have you tested the card on other hardware?
Darrick
On 10/24/2010 10:23 PM, John Novack wrote:
> I have had several TE110 Digium T1 cards work satisfactorily on HP thin
> clients, both 5720 and 5710 unit
I have had several TE110 Digium T1 cards work satisfactorily on HP thin
clients, both 5720 and 5710 unit with no error messages.
Not exactly on message, but AstLinux seems OK.
John Novack
Darryl Chandler wrote:
> Just wondering if this is common, or something to pay a lot of attention
> to; as
Just wondering if this is common, or something to pay a lot of attention
to; as this is the first time I have configured astlinux on a Soekris 5501.
Oct 24 22:30:49 pbx user.info kernel: wctdm24xxp :00:0e.0: ERROR:
Unable to service card within 25 ms and unable to further increase latency.
O
> I try to run a 5501 with a Digium TE122 and onboard hardware Echocancelation.
> First was the firmwarefile for the echcancelation missing. So I copied it into
> /lib/firmware.
I have the same problem with a TDM404E - does this solve it? If so,
will 0.7 come with the new hw e/c firmware?
> wcte1
Hi,
I try to run a 5501 with a Digium TE122 and onboard hardware Echocancelation.
First was the firmwarefile for the echcancelation missing. So I copied it into
/lib/firmware. But after that when I try a modprobe wcte12xp I always get the
following message:
wcte12xp0: Missed interupt. Increasi
Hi again,
Just as an update to those who are curious, I've gotten the card working
on a Soekris running Asterisk 1.6.0.9 and Dahdi 2.1.0.4. It's not using
AstLinux though, I just ported it to the embedded distribution we
maintain internally.
I did some stress testing by having one client running
On Fri, 29 May 2009 10:18:49 -0400, Josh Mahonin wrote:
>Hi Michael,
>
>You raise a good point. I have previously been using a 1200Mhz VIA-board
>as the basis for a media gateway, which has been more than adequate for
>what I need. Unfortunately, it's running Asterisk off of a hard drive,
>and we'
Hi Michael,
You raise a good point. I have previously been using a 1200Mhz VIA-board
as the basis for a media gateway, which has been more than adequate for
what I need. Unfortunately, it's running Asterisk off of a hard drive,
and we've had stability issues with this series of boards in the past.
On Wed, 27 May 2009 10:18:28 -0500, Lonnie Abelbeck wrote:
>Interesting...
>
>TC400B - Voice Processing - Data Sheet
>http://docs.digium.com/TC400B/tc400b-datasheet.pdf
>
>It would be cool if of a lower than 120 G.729a Transcodes option was
>available for a lower cost for embedded applications.
>Interesting...
>
>TC400B - Voice Processing - Data Sheet
>http://docs.digium.com/TC400B/tc400b-datasheet.pdf
>
>It would be cool if of a lower than 120 G.729a Transcodes option was
>available for a lower cost for embedded applications.
>
>Lonnie
>
>On May 27, 2009, at 10:00 AM, Darrick Hartman wr
Interesting...
TC400B - Voice Processing - Data Sheet
http://docs.digium.com/TC400B/tc400b-datasheet.pdf
It would be cool if of a lower than 120 G.729a Transcodes option was
available for a lower cost for embedded applications.
Lonnie
On May 27, 2009, at 10:00 AM, Darrick Hartman wrote:
> I'
I've not used the transcoder hardware card. Looks interesting though.
Udev should handle creating the correct devices, but it's likely that
Digium won't officially support the card unless it's on a system with
Dahdi. We're working towards that, but won't officially support Dahdi
until after t
Hi all,
I've been using the Digium TC400 G729/G711 transcoder card in various
Asterisk installations for a while with great results, but I'd like to
start using it on an embedded platform, such as the Soekris net5501.
I grabbed AstLinux 0.6.5, and with some symlinking (/dev/zaptranscode =>
/dev/z
:55 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] digium tdm410p
It's gonna be a problem with your contexts...check to see that your
zapata.conf is pointing to the right place in your extensions.conf. Make
sure your dialplan contexts allow for calls to your sip exten
ECTED] on behalf of Justin Coffi
Sent: Tue 9/9/2008 8:13 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] digium tdm410p
Clara,
I've attached my working config files. I created these /after/ a
wipe/rebuild. I hope this helps.
- Justin
Clara Chan wrote:
Unfortunately
ideas??
Clara
-Original Message-
From: [EMAIL PROTECTED] on behalf of Justin Coffi
Sent: Tue 9/9/2008 8:13 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] digium tdm410p
Clara,
I've attached my working config files. I created these /after/ a
wipe/rebuild. I hope
ist
Subject: Re: [Astlinux-users] digium tdm410p
On Sep 4, 2008, at 9:08 AM, Justin Coffi wrote:
ZAPMODS=wctdm24xxp
That is the line I have in my /mnt/kd/rc.conf. I've tried it with ir
without quotes. After the reboot I ran lsmod and I have nothing to
show for it.
If (and on
rc.modules.
Clara
-Original Message-
From: [EMAIL PROTECTED] on behalf of Lonnie Abelbeck
Sent: Fri 9/5/2008 12:29 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] digium tdm410p
On Sep 4, 2008, at 9:08 AM, Justin Coffi wrote:
> ZAPMODS=wctdm24xxp
>
> That is th
I put it in there and it worked. Thanks for all the help.
I think the documentation should be written in the format one of those
"choose your own adventure" books.
/If you have /mnt/kd/rc.conf.d/user.conf please turn to page 47. If you
do not please turn to page 49.
;)
/
Lonnie Abelbeck wro
On Sep 4, 2008, at 9:08 AM, Justin Coffi wrote:
> ZAPMODS=wctdm24xxp
>
> That is the line I have in my /mnt/kd/rc.conf. I've tried it with ir
> without quotes. After the reboot I ran lsmod and I have nothing to
> show for it.
If (and only if) the directory /mnt/kd/rc.conf.d/ exists, you will
ZAPMODS=wctdm24xxp
That is the line I have in my /mnt/kd/rc.conf. I've tried it with ir
without quotes. After the reboot I ran lsmod and I have nothing to show
for it.
Darrick Hartman wrote:
Edit your rc.conf file and set ZAPMODS=wctdm24xxp
Then reboot.
Justin Coffi wrote:
I moved the f
Justin,
1) Make sure /mnt/kd/zaptel.conf is a plain file and not a symbolic
link elsewhere.
2) Issue the following command:
ls -la /oldroot/mnt/asturw/etc/
If there are any forms of zaptel.conf in /oldroot/mnt/asturw/etc/,
remove them.
3) Then reboot. Hope that does it.
Lonnie
On Sep 4,
Edit your rc.conf file and set ZAPMODS=wctdm24xxp
Then reboot.
Justin Coffi wrote:
> I moved the file from /etc/zaptel.conf to /mnt/kd/zaptel.conf and
> reboot. Now the file information is stored in /mnt/kd/zaptel.conf but
> ztcfg won't read it. Even if I use "ztcfg -vv -c /mnt/kd/zaptel.conf"
I moved the file from /etc/zaptel.conf to /mnt/kd/zaptel.conf and
reboot. Now the file information is stored in /mnt/kd/zaptel.conf but
ztcfg won't read it. Even if I use "ztcfg -vv -c /mnt/kd/zaptel.conf"
Another challenge I'm facing:
I believe that I shouldn't have to run "modprobe wctdm24xxp
Thank you. You're a lifesaver.
Lonnie Abelbeck wrote:
Justin,
move your /etc/zaptel.conf to /mnt/kd/zaptel.conf and reboot.
Lonnie
On Sep 3, 2008, at 3:13 PM, Justin Coffi wrote:
I've managed to get my TDM410P configured but my /etc/zaptel.conf
settings aren't sticking after a reboot. An
Justin,
move your /etc/zaptel.conf to /mnt/kd/zaptel.conf and reboot.
Lonnie
On Sep 3, 2008, at 3:13 PM, Justin Coffi wrote:
> I've managed to get my TDM410P configured but my /etc/zaptel.conf
> settings aren't sticking after a reboot. Any suggestions? I have both
> unionfs and a keydisk config
I've managed to get my TDM410P configured but my /etc/zaptel.conf
settings aren't sticking after a reboot. Any suggestions? I have both
unionfs and a keydisk configured.
On Mon, Sep 1, 2008 at 11:41 PM, Darrick Hartman (lists)
<[EMAIL PROTECTED]> wrote:
> No problem. Looks like everything will wo
No problem. Looks like everything will work once you get the
zaptel.conf and zapata.conf files configured properly. The fxs modules
are green. Do you have green or red modules?
Clara Chan wrote:
> My zaptel.conf consists of two lines
>
> loadzone=au
> fxoks=1-2
>
> as I am using a TDM410P w
My zaptel.conf consists of two lines
loadzone=au
fxoks=1-2
as I am using a TDM410P with 2 fxs modules in ports 1 and 2.
I initiated the ztcfg -vv command again and received the following
error
>>>
Zaptel Version: 1.4.10.1
Echo Canceller: MG2
Configuration
==
Channel map
Darrick,
I had to do the modprobe wctdm24xxp from super user mode, but that
completed with no problems.
I then initiated the "ztcfg -vv" command
and received the error of
Line -: unable to open configuration file '/etc/zaptel.conf'
However, as the file is currently empty, I will need to popula
Darrick Hartman wrote:
> Probably means we'll have to get a newer kernel in place before it will
> be usable. I don't have one of those cards. After we get 0.6.0 finally
> released, we'll take a closer look.
>
Doing a quick look, this card requires Asterisk 1.4.17 or newer (ok
there) and Zap
as Clara. I'm using
>>>> astlinux-trunk-1907-via.tar.gz.
>>>>
>>>> Has anyone come up with a solution?
>>>>
>>>> On Mon, Aug 25, 2008 at 5:48 PM, Clara Chan <[EMAIL PROTECTED]> wrote:
>>>>
>>>&g
o.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Darrick Hartman
Sent: Tuesday, 26 August 2008 7:41 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] digium tdm410p
Clara,
You're using a new card from Digium. That won't be sup
>> Thanks, will try that and let you know how I go.
> >>
> >>
> >> -Original Message-
> >> From: [EMAIL PROTECTED]
> >> [mailto:[EMAIL PROTECTED] On Behalf Of
> >> Darrick Hartman
> >> Sent: Tuesday, 26 August 2008 7:41 A
at and let you know how I go.
>>
>>
>> -Original Message-
>> From: [EMAIL PROTECTED]
>> [mailto:[EMAIL PROTECTED] On Behalf Of
>> Darrick Hartman
>> Sent: Tuesday, 26 August 2008 7:41 AM
>> To: AstLinux Users Mailing List
>> Subject: Re: [
---
> From: [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] On Behalf Of
> Darrick Hartman
> Sent: Tuesday, 26 August 2008 7:41 AM
> To: AstLinux Users Mailing List
> Subject: Re: [Astlinux-users] digium tdm410p
>
> Clara,
>
> You're using a new card from Digium. Tha
Thanks, will try that and let you know how I go.
-Original Message-
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of
Darrick Hartman
Sent: Tuesday, 26 August 2008 7:41 AM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] digium tdm410p
Clara,
You're us
t Astlinux to work from there.
>
>
>
> Any suggestions?
>
>
>
> Rgds,
>
> Clara
>
>
>
>
>
> *From:* [EMAIL PROTECTED]
> [mailto:[EMAIL PROTECTED] *On Behalf Of
> *Ioan Indreias
>
trying to get Astlinux to work from there.
Any suggestions?
Rgds,
Clara
From: [EMAIL PROTECTED]
[mailto:[EMAIL PROTECTED] On Behalf Of Ioan
Indreias
Sent: Monday, 25 August 2008 9:53 PM
To: AstLinux Users Mailing List
Subject: Re: [Astlinux-users] digium
Subject: [Astlinux-users] digium tdm410p
Hi, all,
I have finally got 0.4.8 working with a Via board and thought I will take the
next step in installing a Digium tdm410p with two fxs ports in modules 1 & 2,
so I could attach analog phones and a fax machine to it.
But I am get
Hi, all,
I have finally got 0.4.8 working with a Via board and thought I will
take the next step in installing a Digium tdm410p with two fxs ports in
modules 1 & 2, so I could attach analog phones and a fax machine to it.
But I am getting this error "03:0f.0 Ethernet controller: Digium, In
68 matches
Mail list logo
