I am running into same problem calling from CCM to CME (SIP or SCCP) and
calling from CME SIP to CCM (SIP or SCCP).
They ring, but hang up when answer...
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Michael
Ciarfello
Sent:
Here is one off the blog by Vik
http://ipexpert.ccieblog.com/2009/09/10/what-every-ccie-voice-candidate-should-know-about-dialing/
Here is the SRND Reference - The dial Plan section covers it.
http://www.cisco.com/en/US/docs/voice_ip_comm/cucm/srnd/7x/dialplan.html
I would be interested
When setting up CUE and integrating it with CallManager my remote site
bandwidth is choked. Dial tone on my phones if very slow. The integration
itself seems to timeout. It takes me several attempts and it is very slooow,
pings timeout or are 2 to 3 seconds.
Anyone having the same issue
It seems to happen when you have QOS setup on one of the PVC's. remove
all the QOS config and try again
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Cisco Dave
Sent: Thursday, 24 September 2009 6:13 PM
To:
All,
I believe that for the RS labs, they are graded by proctors at another
location, and therefore, another time-zone. So, sometime around midnight
after I took my exam, I got the results from my RS lab attempt last year.
I have not attempted my voice lab yet. It is scheduled for a few
When you take a voice lab, the proctor grades it either the same day or next
day at the same site using the seat you sat in and does test calls. On my
first voice attempt, I got my results the next day around 2:00pm. On my second
attempt, I got my results at 2:00am, which was only 9 hours
MUCH respect, Mike. This is the perfect document for this kind of
question. Thank you.
On Wed, Sep 23, 2009 at 7:29 PM, mike deal groganhoc...@gmail.com wrote:
I've used this document in the past for sizing purposes:
I'm just glad I can finally contribute *something* to these discussions! :)
FYI, cisco has moved the doc in the past, so make sure you remember the
title in case it moves again.
mike
On Thu, Sep 24, 2009 at 9:38 AM, shikamaru shikam...@kagadis.com wrote:
MUCH respect, Mike. This is the
Haha, I can do better than that! I've downloaded it! ;)
On Thu, Sep 24, 2009 at 8:19 AM, groganhockey groganhoc...@gmail.comwrote:
I'm just glad I can finally contribute *something* to these discussions! :)
FYI, cisco has moved the doc in the past, so make sure you remember the
title in
Hi,
Thanks to everyone who has helped me to archieve the same.
I am so so so happy to get this ID, struggled from last 1 year.
Made 2 attempts on ver 2 but unsuccessful.
I have practise on proctorlabs.com, NLI workbook to learn the technology which
i do not know.
And at last the
And the douche bags strike again.
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of voice master
Sent: Thursday, September 24, 2009 3:53 PM
To: ccie_voice@onlinestudylist.com
Subject: [OSL | CCIE_Voice] Ver 3 passed
Hi,
Thanks to
He's being yanked. It's incredible - does this idiot really think the
list believes him?! Pretty annoying...
Regards,
Wayne A. Lawson II - CCIE #5244
Founder President - IPexpert, Inc.
Mailto: wlaw...@ipexpert.com
Mobile: +1.810.334.1564
:: Message sent from iPhone.
On Sep 24, 2009, at
Thank you..
Thomas J Koch
Owner/Consultant
Digitones, LLC
Cell: 630-808-4910
E-mail: digito...@comcast.net
_
From: ccie_voice-boun...@onlinestudylist.com
[mailto:ccie_voice-boun...@onlinestudylist.com] On Behalf Of Wayne Lawson
Sent: Thursday, September 24, 2009 4:01 PM
To: Mike
Another consideration is the calls per second for each gateway. Just because
you can terminate 4 PRI circuits on a single ISR that does not mean that it is
non-blocking. I installed a call center solution a few years back using 2821
router w/ 3 xT1 connections in each. The inbound call
I think that was addressed earlier in this thread, there was a conversation
about a ISR's pps capacity and how it relates to the PRIs that can be
terminated to it. Right now, looks like the the 3 qty 2811 routers will
have 2 PRIs each, but there's a strong chance that we're going to upgrade to
a
On Thu, Sep 24, 2009 at 5:00 PM, Wayne Lawson groupst...@ipexpert.comwrote:
He's being yanked. It's incredible - does this idiot really think the list
believes him?! Pretty annoying...
I have to commend him. I just want to pass once and he seems to pass every
other week.
Hello,
Am trying to configure the VPIM Location onthe unity, after inputing and
clicking save i get the message below
The requested operation would result in a license violation.
Unable to create VPIM Location
Does anyone have an idea?
Regards
___
You are not licensed for VPIM. Unfortunately, it's about $700 - $1000.I
would strongly urge you not to get this grey market at a GREAT price. You
still have to type the PAK in the Cisco license server. Hate to have that come
back - Already registered or not found, etc.
So Proctorlabs,
Hello Michael,
Am using proctorlab
On Fri, Sep 25, 2009 at 1:05 AM, Michael Ciarfello
mciarfe...@iplogic.comwrote:
You are not licensed for VPIM. Unfortunately, it's about $700 -
$1000.I would strongly urge you not to get this grey market at a GREAT
price. You still have to type the
lol. Is that pod licensed?
System Settings - Licenses -? Related Links (view license usage)
VPIM Networking delivery locations allowed (LicVPIMIsLicensed): Yes or No
From: ABIOLA ADEFILA [adefilabi...@gmail.com]
Sent: Thursday, September 24, 2009 8:08 PM
To:
I have a 2811 due in next week, but I was trying to continue to study as
best as I could using my old routers
2621XM with 256MB RAM and only 48 MB flash. Loaded with 12.4(9)T7 IOS
and 4.1.0.2 CME load - that's the most up to date configuration I could
load with only 48 MB flash
I was trying to
HI there and welcome,
Where is your load 7960 command on voice register global to specify what
firmware file to use?
I think you also need the alias commands on each of your sip firmware
tftp-server commands.
tftp-server flash:phone/7940-7960/p0s3-8-12-00.loads alias p0s3-8-12-00.loads
etc for
Thanks, Michael, that was exactly the problem.
I simply overlooked the load command (always good to have another set of
eyes looking at the problem)
I was unsure of the alias commands, whether they were needed or not
Thanks again
Jeff
*Dear All,*
*can anyone help me configure vg202 with sccp in router side
*
**
*i've already try to configuring with MGCP but i want to try with sccp.
*
Thanks before
Regards,
Tommy
___
For more information regarding industry leading CCIE Lab
24 matches
Mail list logo
