For our company directory, press 1
> To leave a message, press 2
> Thank you "
>
>
> Thanks
>
> Ben
>
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: ww
1. Re: ucm 10 upgrade (Abel Mateo)
>
>
> --
>
> Message: 1
> Date: Sat, 26 Jul 2014 17:37:01 +0930
> From: Abel Mateo
> To: "Wilson Samuel (CCIE)"
> Cc: "ccie_voice@onlinestudylist.com&
uot; , we do not need to pay anything ?
EDelivery means the media will be ISO file downloads, and PAK will be PDF files
HTH
>
> tks,
> k
>
> ___
> Free CCIE R&S, Collaboration, Da
t; (around 1000 users)
>> And we are using new server upgrade.
>>
>> - I am looking for advice on detailed steps ?
>> -what is the best scenario to minimize the downtime ?
>> - do I need to use PCD ?
>>
>> tks,
>> K
>>
>>
>> ___
ts to other SCCP phone (SIP dial rule : 2001)
>
> Assumption : UCM will see all digit 2001 in SIP INVITE message once DIAL is
> press
>
>
> Is the assumption , correct?
>
> tks,
> K
> ___
> Free CCIE R&S,
Check device defaults and see if it is listed there. BTW I don't think they
ask this in the CCIE Collaboration.
On Tue, May 27, 2014 at 11:14 AM, Dharambir kumar varma <
dharambi...@gmail.com> wrote:
> Hi All,
>
> Does CUCM 7.x supports to configure iphone.
> when we
Hello Wayne,
I purchased the OWLE for the previous CCIE version unfortunately I did not
pass. Does that make me a member? How do we do to get access to the "Next
Generation"? I am not actively preparing for the lab but I hope to keep
reading and helping the group if possible.
Rega
11
> 911
> 91.800[2-9]XX
>
> Thanks,
>
> Ben
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: www.youtube.com/ipexpertinc
___
Free
First of all, mind yr manners on the forum before you say anything outlandish
on different races. Secondly using the website at the first place to get lab
dumps shows yr character on how you approach CCIE.
> On Mar 17, 2014, at 10:20 AM, kit yee wrote:
>
> Yes, ccielabdumps so
Hi Karen,
Sorry I don't have that info handy.
May be the Cisco AM in your area could throw some light (just in case if you
have not checked already)
Kind Regards
Sent from my iPhone
> On Dec 3, 2013, at 1:26 AM, Karen Johnson wrote:
>
> tks, since what year Cisco require CCI
>
> Thanks
> ___
> Free CCIE R&S, Collaboration, Data Center, Wireless & Security Videos ::
>
> iPexpert on YouTube: www.youtube.com/ipexpertinc
___
Free CCIE R&S, Collaboration, Data Center, Wireless & Security V
> importantly I don't revisit config pahes just to setup aar.
>
> Hope this helps...
>
> -Justin
>
> On Nov 4, 2013 6:57 AM, "CISCO CCIE VOICE" wrote:
>
>> Hi Guys,
>>
>> i am trying to configure AAR between 2 sites, when i assign AAR-GROUP a
more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
o 5PM.
>> Is there is anyway I can do that? That will help me in the calculation to
>> order the number of concurrent calls properly when I migrate into SIP.
>>
>>
>> Thanks,
>> Hesham
>>
>> ___
>> For
great, but they have their place. I don't think telecom will ever
> be a total cloud based solution.
>
> From: Bill Lake
> To: Drake J
> Cc: "ccie_voice@onlinestudylist.com"
> Sent: Thursday, August 29, 2013 8:12 AM
> Subject: Re: [OSL | CCIE_Voice] Is
for the individual(s) or entity named above. If
> you're not the intended recipient, note that disclosing, copying,
> distributing or using this information is prohibited. If you've received this
> e-mail in error, please let me know immediately on the e-mail address above.
> Thank you. We monitor our e-mail system, and may re
leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
n...@onlinestudylist.com] On Behalf Of CCIE Voice
> Aspirant
> Sent: Thursday, July 25, 2013 12:45 PM
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] HWIC-4ESW
>
> Hello list
>
> I am looking for 2 HWIC-4ESW cards
int gig0/0.402
>> encpasulation dot1q 402
>> ip address 142.202.65.254 255.255.255.0
>> no shut
>
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
gt;
> Thanks,
> Hesham
>
>
> On 25 July 2013 09:45, CCIE Voice Aspirant
> wrote:
>> Hello list
>>
>> I am looking for 2 HWIC-4ESW cards for my lab, does anyone have spares I can
>> buy?
>>
>> Thanks
>> _
Hello
Does anyone have spare HWIC-4ESW and 3560 I can buy?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Hello list
I am looking for 2 HWIC-4ESW cards for my lab, does anyone have spares I can
buy?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job
__
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
hannel selection order is not bound to your telco
> configuration.
> You can set top-down or bottom-up with no issue at all.
>
> hth
> lorenz
>
>
> On Wed, Jul 3, 2013 at 10:58 AM, CISCO CCIE VOICE
> wrote:
>
>> Hi Guys,
>>
>> I am trying to understand the
its taking bottom up
for out bound calls,so did i miss any thing ? can any one share there
knowledge and experience as to how i can configure it
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are
Yes, i am saying Layer 1 and Layer 2 of ISO Model
On Mon, Jul 1, 2013 at 10:53 PM, Sears, Michael (msears) <
michael.se...@compucom.com> wrote:
> When you say L1 and L2 are you talking about layer 1 and 2 of the OSI
> Model?
>
> ** **
>
> Michael Sears, CCIE(V)#
send-alerting
> isdn sending-complete
> isdn outgoing display-ie
> isdn outgoing ie redirecting-number
> no cdp enable
> !
> !
> BR1-RTR#show controller t1 0/1/0
> T1 0/1/0 is up.
> Framing is ESF, Line Code is B8ZS, Clock Source is Line.
> !
>
>
isdn bind-l3 ccm-manager
> isdn send-alerting
> isdn sending-complete
> isdn outgoing display-ie
> isdn outgoing ie redirecting-number
> no cdp enable
> !
> !
> BR1-RTR#show controller t1 0/1/0
> T1 0/1/0 is up.
> Framing is ESF, Line Code is B8ZS, Clock So
; voice translation-rule 14
> rule 1 // // type any international plan any isdn
> !
> voice translation-profile international
> translate calling 4
> translate called 14
> !
> dial-peer voice 9011 pots
> translation-profile outgoing international
> destination-pattern 901
? SC,?? HQ-HQ : G711? , SB-SB? G711, SC-SC : g711??
> (rest? relation : G729)
> >>>? and assign tp DP
> >>>- Location : HQ? and SC? : mandatory , assign to DP
> >>>- MRGL HQ --> MRG--> MTP from HQ??? &?? same for SC?? , assign to DP
> >>>?
>
ning: parameter number-of-hunt-grps has not been registered under
> app-b-acd namespace
> Branch2(config-app-param)#do show run | begin application
> associate application SCCP
> !
> dspfarm profile 5 conference
> codec g711ulaw
> codec g711alaw
> codec g729ar8
> codec g7
t; !
>>
>> service app-b-acd-aa <-- you can't change the name of the embedded
>> BACD AA script
>>. (detail remove for brevity).
>>param service-name app-b-acd <-- refer to the embedded BACD Queue
>> script
>>param handoff-
ueue script
>param handoff-string app-b-acd-aa
>. (detail remove for brevity).
> !
>
> dial-peer voice 222 voip
> service app-b-acd-aa <-- refer to the name of the embedded BACD AA
> script
>. (detail remove for brevity)...
> !
>
>
at, Jun 22, 2013 at 1:00 AM, CISCO CCIE VOICE
> wrote:
>
>> Hi,
>>
>> I am trying to Remove B-ACD configuration but still showing in the
>> running configuration i have restarted the router but no look any guess?
>>
>>
>> thanks
>>
>>
>>
Hi,
I am trying to Remove B-ACD configuration but still showing in the running
configuration i have restarted the router but no look any guess?
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
HI experts,
I am trying to remove B-ACD cnofigs from the router but still show in
running config,i have reloaded the router but still no luck any guess ?
Thks
___
For more information regarding industry leading CCIE Lab training, please visit
an stay in a call queue and
> retry to connect with a hunt group before the call is sent to an alternate
> destination number.
>
> •*seconds*—Maximum period of time, in seconds. The range is from 30 to
> 3600. The default is 600.
>
>
> On Mon, Jun 17, 2013 at 5:11 PM, CISCO
ry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
fairly quickly. Good luck.
>
>
> Sent from an Apple iOS device with very tiny touchscreen input keys.
> Please excude my typtos.
>
> On Jun 16, 2013, at 10:06 AM, "CISCO CCIE VOICE"
> wrote:
>
> I have Branch 2 site which contains Transcoder moreover all my
ctions. Otherwise you would get a busy signal if
> region said g729 and CCX was set for g711.
>
>
>
>
>
>
> Sent from an Apple iOS device with very tiny touchscreen input keys.
> Please excude my typtos.
>
> On Jun 16, 2013, at 9:41 AM, "CISCO CCIE VOICE"
> w
ebook<http://www.facebook.com/pages/Alexander-Open-Systems-AOS/109484829074064>
> | LinkedIn <http://www.linkedin.com/company/aos>
>
>
>
>
> Sent from an Apple iOS device with very tiny touchscreen input keys.
> Please excude my typtos.
>
> On Jun 16,
t;
> I think the easiest way is to check UCCX Service Parameters under System
> menu.
>
> --Somphol.
>
>
> --Somphol
>
>
> On Sun, Jun 16, 2013 at 7:36 PM, CISCO CCIE VOICE
> wrote:
>
>> Hi,
>>
>> How ca
Sent from Mailbox <https://www.dropbox.com/mailbox> for iPad
>
>
> On Sun, Jun 16, 2013 at 3:37 AM, CISCO CCIE VOICE
> wrote:
>
>> Hi,
>>
>> How can i verify that UCCX is using G729 codec native
>>
>> Thnajs
>>
>
>
___
Hi,
How can i verify that UCCX is using G729 codec native
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
Hi,
How can i verify that UCCX is using G729 codec native
Thnajs
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
owing number and open a case with the CCIE Certifications Team.
> 1.800.553.6387 #4 #1
> --ms
> Michael Sears, CCIE(V)#38404
> Cisco Certified Unfied Communications Computing Systems Specialist
> E911 Infrastructure Specialist
>>
>>
>> Dear All,
>>
>>
It will be a better option to cancel or reschedule CCIE voice lab exam and
take it after Feb 2014 ,its wast of money,time and effort on CCIE Voice
On Wed, May 29, 2013 at 10:27 AM, wrote:
> Send CCIE_Voice mailing list submissions to
> ccie_voice@onlinestudylist.com
>
> To
> > Today's Topics:
> >
> >1. (no subject) (ie ravindra)
> >2. (MGCP Teardown) (ie ravindra)
> >3. Re: (no subject) (Shabeeb Mohammed)
> >4. h323 Fast start configuration (Piyush Jain)
> >
> >
> > ---
, 2013 at 10:21 PM, CISCO CCIE VOICE
> wrote:
>
>> HI experts,
>>
>> When the Phones are in CME SRST its does not shows Extension on Phone
>> display this happens when i change the name +86223033001 to S
HI experts,
When the Phones are in CME SRST its does not shows Extension on Phone
display this happens when i change the name +86223033001 to SiteC Phone 1
under Ephone-dn's
Thnks
___
For more information regarding industry leading CCIE Lab tra
Hi Experts,
When i dial UCCX Trigger i am not able to play custom welcome prompt rather
its playing MOH.
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking
Hi Experts,
How can i send Calling name to PSTN over MGCP and H323 Gateway?
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
I am facing the same problem when is use default icd.aef script
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
ly
> validated
> 4-Then go to UCCX Admin > Script Management -> Upload the Script
> --> Overwrite the Script --> Then Refresh The Script
> 5-Refresh the Application Script
>
> Then you should be good to go
>
> Thanks,
> Hesham
>
>
> On 29 Ap
Hi Experts,
I am getting an error "i am sorry we r currently facing system problm and r
unable t process ur call" during CSQ
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you
OK, The difference is the variation
> between the INVITE and the ACK.
>
> This link has further description.
> http://www.iplogos.fr/English-Resources/Focus/sip-early-media-early-offer-en.html
>
>
>
> On Sun, Apr 28, 2013 at 2:51 AM, CISCO CCIE VOICE
> wrote:
>
>> Thank you
Thank you suresh i will check ths on my pod...
On Sun, Apr 28, 2013 at 11:26 AM, Suresh Bhandari wrote:
> Content Length 0 means, there will be an OK followed with SDP So
> basically both are same.
>
>
> On Sun, Apr 28, 2013 at 1:56 PM, CISCO CCIE VOICE
> wrote:
>
>
, Suresh Bhandari wrote:
> If you are busying out the channels in CUCM using automatic mgcp
> configuration, it will not be Fractional PRI... Experts, please correct me
> if I am wrong!
>
>
> On Sun, Apr 28, 2013 at 2:01 PM, CISCO CCIE VOICE
> wrote:
>
>> HI Thanks Again,
>
> Notice the boldface text that represents your gateway.
>
> Further, you have to check Enable status Poll in your gateway page.
>
> Hope this helps.
>
>
> On Sun, Apr 28, 2013 at 12:45 PM, CISCO CCIE VOICE
> wrote:
>
>> HI Thanks,
>>
>> but if suppo
including SDP message and so its an early offer.
>
> HTH
>
>
> On Sun, Apr 28, 2013 at 1:15 PM, CISCO CCIE VOICE
> wrote:
>
>> HI Experts,
>>
>> Which SIP Message contains Delay Offer and Early Offer message ? i i am
>> bit confuse as some document
information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
ster for you.
>
> --
> Date: Sun, 28 Apr 2013 09:10:30 +0300
> From: ccievoic...@gmail.com
> To: ccie_voice@onlinestudylist.com
> Subject: [OSL | CCIE_Voice] MGCP Auto vs Manual configuration
>
>
> Hi Experts
>
> Which method to be use in CCIE Voice lab exam
Hi Experts
Which method to be use in CCIE Voice lab exam in order to configure MGCP
Auto or Manually.
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for
llref = 0x808D
ISDN Se0/0/0:15 Q931: RX <- CONNECT_ACK pd = 8 callref = 0x008D
Branch2(config-if)#
%ISDN-6-CONNECT: Interface Serial0/0/0:0 is now connected to 911 N/A
%ISDN-6-CONNECT: Interface Serial0/0/0:0 is now connected to 911 N/A
___
For more infor
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
lab-,7, updated now
On Tue, Apr 2, 2013 at 11:00 PM, Aman ccie wrote:
> Hello
>
> They are asking for fast start and unity and ipcc question is changed...
>
> I failed badly now if anyone want to work together email me on this
> Connection failure.
> It's very important question as It could come in the new CCIE Voice Labs
> all over the world.
>
> Best Regards,
> Hesham
>
> ___
> For more information regarding industry leading CCIE Lab training, p
Hello
They are asking for fast start and unity and ipcc question is changed...
I failed badly now if anyone want to work together email me on this id
Very bad
___
For more information regarding industry leading CCIE Lab training, please visit
Hi Guys,
Regarding E1 Framing if the question states the below
FOR E1 use the following:
switch type:net5
framing :CRC
linecode :HDB3
then do i need to use the NO-CRC or CRC ?
___
For more information regarding industry leading CCIE Lab training
ISPLAY IE in outgoing ISDN messages is allowed
>>
>> and
>> *isdn outgoing ie ?
>> *
>>...
>>displayDISPLAY IE in outgoing ISDN messages is allowed
>>...
>>
>> so this may be otherwise option for the same display-ie.
>>
>>
no cdp enable
!
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
en
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
thanks in advance
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
others.
Farooq
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
hen verify the CSS/partition
> for the GW and the number of significant digits inbound.
>
> You should or could then start checking your MGCP messages if this does
> not solve it.
>
> Good luck
>
> Sent from my iPad
>
> On Mar 10, 2013, at 12:12 AM, Jaleel ccie w
iguration/guide/b_cflash.html#wp23144
>
>
> ** **
>
> ** **
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CISCO CCIE VOICE
> *Sent:* Tuesday, March 12, 2013 10:51 AM
> *To:* ccie_voice@onlin
Hi Experts,
can any one help me I want to create directory folder on router without
formatting flash when i use mkdir command its saying that invalid input
thnks
___
For more information regarding industry leading CCIE Lab training, please visit
HI experts,
If the question ask to configure H323 Trunk to backbone router then in that
do i need to configure it as H323 Gateway or H323 Non -GK controlled trunk?
Thnks
___
For more information regarding industry leading CCIE Lab training, please
Hi Experts,
Can anyone explain me how to collect h323 trunk debugs from RTMT ...
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
only 6 Channels
for T1 controller.
What else can I do or check to fix this problem.
Farooq
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a
HI Guys,
Can any one Share H323 and SIP Trunk configuration that need to be done on
PSTN Router in order for it to work properly ...
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
>3. Re: Phone NTP Reference Vs NTP Reference (Cory Gray)
>4. Re: Phone NTP Reference Vs NTP Reference (CCIEing)
>5. AAR HELP (CISCO CCIE VOICE)
>6. Re: AAR HELP (Jamie Parr (jamparr))
>7. Re: AAR HELP (CISCO CCIE VOICE)
>
>
> --
*
> Engineer - IT
> jamp...@cisco.com
> Phone: *+44 20 8824 2641*
> Mobile: *+44 7590622049*
>
> ** **
>
> *From:* ccie_voice-boun...@onlinestudylist.com [mailto:
> ccie_voice-boun...@onlinestudylist.com] *On Behalf Of *CISCO CCIE VOICE
> *Sent:* 05 March 2013 08:13
&g
location on VM Pilot
Number,VM Ports ,CUE-PORTS and CTI-Route Point etc
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
Thanks Mark for quick reply...
On Tue, Feb 26, 2013 at 11:50 PM, Mark Thrash (marthras) wrote:
> Oh yea
>
> __
>
> Mark Thrash
>
> marth...@cisco.com
>
> NCE, Collaboration and Unified Communications Practi
Hi,
Is it safe to use BAT in real lab exam?
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
www.PlatinumPlacement.com
, 2013, at 6:45 AM, "CISCO CCIE VOICE"
> wrote:
>
> Hi
>
> Can any one help me with Dial Plan consideration when calling from HQ Site
> to Branch 1 Site,following what i have configure.But the problem is that on
> B1PH1 screen its showing as below
>
&g
:*2XXX
dial-peer voice 10 pots
destination-pattern 1...
perfix 14082021
port 0/0/0:23
thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
HI,
Does MWI works on SRST Proper mode (call-manager-fallback).?
Thanks
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a CCNP or CCIE and looking for a job? Check out
HI
When in SRST either SRST Proper or CME as SRST ,when i call from HQ to
branch office do i need to assign unregistered DN in order to have ext to
ext calling working case of WAN fails
___
For more information regarding industry leading CCIE Lab
Hi
I want to sell my wonderful CCIE Voice Lab, the price is 35,000 RS for
those hoe interesting, contact on my email: cciev (at) hotmail.com
Thanks
check the list of the equipment below:
*POE Switch*
1 x Cisco Catalyst 3750 24 Port PoE WS-C3750-24PS-S Catalyst 3750 24 10/100
PoE + 2 SFP
d HQ Phone 1 (+14082022001)
For +19723033001 (3001)
By +1972303300 (3001)
Any idea why the display is different after the reload ?!
Thanks, Goog
___
For more information regarding industry leading CCIE Lab training, please visit
www.ipexpert.com
Are you a
gt; Just purchased voice labs
>
> thanks
>
> ___
> For more information regarding industry leading CCIE Lab training, please
> visit www.ipexpert.com
>
> Are you a CCNP or CCIE and looking for a
1, 2012, at 1:44 PM, abollgoog ccie wrote:
>
> Hi Bill/All
>
> I am calling from site to site; the plus show up in the status line (the
> area above the softkeys).
> Can any one explain why i can't get the + along with name on top of the
> phone when calling internationa
ine (the area above the softkeys).
>
> HTH.
>
> - Bill
> --
> William Bell
> blog: http://ucguerrilla.com
> twitter: @ucguerrilla
>
>
>
> On Aug 30, 2012, at 12:18 PM, abollgoog ccie wrote:
>
> One thing more ...
> when i use debug isdn q931; i can see the (+
e call plane
> (which is the part of the phone screen that shows name, number, etc.). But
> it will show up in the status line (the area above the softkeys).
>
> HTH.
>
> - Bill
> --
> William Bell
> blog: http://ucguerrilla.com
> twitter: @ucguerrilla
>
>
>
>
One thing more ...
when i use debug isdn q931; i can see the (+) in the calling number; but
its not showing in the phones' screen !!
On Thu, Aug 30, 2012 at 8:13 PM, abollgoog ccie wrote:
> Hi All,
> Facing some issues with international calls, when calling international
> fro
1 - 100 of 572 matches
Mail list logo